HP laserjet 3300 mfp has stopped printing

My HP laserjet 3300 mfp has suddenly stopped printing. The error log gives no information although is has occasionally given the following message recently:
Error0=2009/10/15 14:54:44 - GetProductDeviceID: Not PML registered, so cannot unregister
Error1=2009/10/15 14:54:41 - unable to find and PML register with device
The trouble shooting process gets me nowhere: nothing has changed (except MS updates! ). I can see the printer from all control panels on the network. It says 'error' but gives no clue as to what that might be. I've tried printing with notepad and a test document and rebooting but nothing works. Its photocopying facility works fine. Help, anyone?

I would think the ip address and folder options of the printer is what probably changed and when you setup the printer again you did so with a new ip address but also had to put the folder info in again. Suggest you type in the ip address of the printer into your web browser and see if there is a link there to setup the scan to folder and if there is, put the correct information back in.

Similar Messages

LaserJet Pro MFP M125a not printing

Hi,
my relatively new LaserJet PRO MFP M125a stopped printing today. Scan function is still working. All lights are on. Cannot print test page. When I try to print Word or PDFdoc, spool is empty, no job is waiting.
Uninstaled all HP software and drivers, cleaned registry, installed it again. Nothing. Changed USB cable, it worked for few pages, then turned off. When I turned it on, problem is here again. Changed USB cable again, but no luck.
Windows is fresh, new HP drivers...
Help is needed.
Best regards,
Nikola

Hi @MaletaBG,
I would like to help you with getting the printer, printing again.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
HP Color LaserJet Pro MFP M176n Printer, and HP LaserJet Pro MFP M125, M126, M127fn, M128fn, and M12...
Please try the steps in this document to see if it will help resolve this issue.
HP LaserJet Printers - 'Printer is offline' Message Displays on the Computer and the HP Printer Will...
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you appreciate my efforts, please click the Thumbs up button below.
Thank You. I look forward to hearing from you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet pro 200 color mfp m276nw stop printing memory low

laserjet pro 200 color mfp m276nw stops printing giving an error message that the is memory low. How do I clear the memory?

I have had the same issue, cannot print multiple pages without having the memory low error appear. I have cleared the faxes from the setting menu. I have done an NVRAM reset and am able to print a 3 page document once and then receive the low memory error when I attempt to print another 3 page document. Please PM me the way to resolve this problem. Thanks in advance.

My IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

my IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

Hi I have an HP printer. I use an APP called print central from APP Store. Used this for the last 2 years on 2 IPhones & 3 iPads with no problems. Cheers Brian

Envy 4500 has stopped printing off both a Macbook Air and a Pro - was fine before

I've been very happy with my printer/scanner but today it has stopped printing off both my Macbook Air and Macbook Pro. The printer seems fine so not sure why this has happened. Please help!

Hi @Swaggie,
Welcome to the HP Forums!
I understand that your HP Envy 4500 is not printing from your Macbook Air and your Macbook Pro. I am happy to help you with this printing issue!
For further assistance, I will need to know the following information:
The version number of the Mac Operating Systems. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies. Copy Text or Mixed Documents.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If there are any error messages on the printer's display panel.
In the meantime, please take a look through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Mac OS X, and let me know what happens!
Hope to hear from you soon!
“Please click the Thumbs up icon below to give me a virtual high-five for responding.”
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Photosmart Premium - C309g and it has stopped printing in black (but will print colour)

Hi my HP Photosmart Premium - C309g and it has stopped printing in black (but will print colour). I've tried:-
printing test page - blank apart from windows logo
powering off and on
printing form different programmes.
Both black printer cartridges are full.
printer is 3 days out of one year guarantee!
I'm not very technical so easy solutions would be preferred.
Thanks
This question was solved.
View Solution.

Try the solution in this thread for cleaning the C309g printhead.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

I have a hp photosmart B8550 that has stopped printing black. Any help from any one?

i have a hp photosmart B8550 that has stopped printing black. I put in a new black cartridge, but still no luck. i am about ready to trash the unit. It never has worked well and uses a lot of ink. Any help from any one?

Hi sydnoid_615
Sorry to hear that you are having this issue and I hope you are otherwise doing well;
What Operating System?
If windows Xp or later try this HP Hardware Diagnostic Utility
Veriify the printer firware and software up to date Go Here select your OS and verify
How your printer is connected to your computer USB, Wireless, Ethernet ,ETC)
if networked check the firware of the printer is the latest as well
Hope it hepls;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Laserjet 6P won't stop printing - prints a line of junk on each page -not connected to network or PC

My HP Laserjet 6P won't stop printing. It prints a few lines of symbols and characters at the top of each page. The printer is not connected to a network or computer. I tried shutting the printer off for a long time. This started when I tried printing from a MAC to the printer, but now there is nothing connected to the printer.
Any suggestions for resetting, etc.? I don't know how to reset this printer so I haven't tried anything with the various buttons, etc.

Disable the "Enable bidirectional support" in the P1102w Properties > Ports.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

My 6180 has stopped printing the hp diagnostic tool says connectivity is the problem how can i fix

how can i fix the c6180 that has stopped printing the hp diagnostic tool says connectivity is the problem

Hi thefishermanfl,
How is the printer connected to your computer?
The following documents and utility should help you get the printer up and working again. Let me know if you need additional assistance.
HP Print Diagnostic Utility:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&cc=us&dlc=en&lc=en&...
Installing the Printer Software on a Wireless or Wired (Ethernet) Network:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02283715&tmp_task=useCategory&cc=us&dlc=en&jump...
Installing the Product Software for a USB Cable Connection:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01793627&tmp_task=useCategory&cc=us&dlc=en&jump...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

MY envy 5330e has stopped printing anything from online sources.

MY envy 5330e has stopped printing anything from online sources but will print from on board documents or pictures.

Hey @youngfmly,
Because your HP ENVY 5530 e-All-in-One Printer is producing blank prints from three computers when printing from the the internet I'm wondering if there may actually be a hardware ink system issue occuring. I understand that this may sound odd as everything else appears to print fine. However, when printing from your computers colour ink is used to enrich the black ink when printing in certain programs. Primarily when the computer 'sends' the print job to the printer as an image file. Therefore, just to ensure that your printers ink system is functioning properly, I am going to have you print a standalone Print Quality Report.
How to Print the Quality Report:
Load plain white paper in the paper tray.
On the printer control panel, touch the Settings icon (), and then touch Tools. The Tools Menu displays.
Touch Print Quality Report. The printer prints the test page.
If this report prints perfectly: Than the issue that you're experiencing is not related to the printer. Rather, there is likely a setting that still needs to be checked under Google Chrome. If your modem/router was causing this issue all prints would be affected.
If this report prints with quality defects or missing colours: Than the Google Chrome printing issue that you're experiencing is being caused by your printer. To resolve this print system issue can I please have you click here. Once the support document opens please run through Solution six, Solution seven, and Solution eight. This includes any sub-steps under the listed Solutions.
Please let me know the result of printing this standalone Quality Report. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

IPad 3 has stopped printing to my AirPrint printer iPhone still prints

My iPad 3 has stopped printing to my AirPrint printer. My iPhone still prints things ok. It worked before and it shows the printer as available when I send to print and says it is contacting the printer then preparing then just nothing happens. Nothing has changed with my network and my partners iPad 3 still prints stuff fine. Help!

Reboot the iPad 3.
If it still doesn't work, reboot the router.

Hp laserjet m1132 mfp can't print from remote desktop

Hi, i've installed HP LASERJET M1132 MFP in my PC with windows 7 ultimate 32 bit and it works fine. But when i connect using remote dekstop with our Windows server 2008 r2 64 bit. its not printing. error "test page failed to print , would you like to view the print troubleshooter for assistance?" and it doesnt solved the problem.
please help

Thank you for your interest.
The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
I think I can close the topic.
(translated from Polish into English using Google translator)

HP LaserJet M1132 MFP does not print from a remote desktop

Hi,
I have a HP LaserJet M1132 MFP (product number CE847A) connected to a PC (MS Windows XP Home Edition + SP3) via USB. There is no problem with the printer. However, when the connection using Remote Desktop (it's set to use local facilities and resources, or in my case, printers, and serial ports) to the server (MS Windows Server 2008 R2), I can not even print a test page from a remote desktop.
Error message: "Print a test page failed. Do you want to display a tool to solve problems with printing to get help?"
But it does not lead to nowhere, as expected is access to the internet, and I have not it from a MS Windows Server 2008 R2.
The same error is for the HP LaserJet M1120n MFP.
I have installed on my PC other printer - old OKI ML321 (needle) connected to a PC using LPT cable and network printer Konica Minolta 1690MF (in another room). In both of these printers can easily print a test page from a remote desktop.
Please help me.
This question was solved.
View Solution.

Thank you for your interest.
The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
I think I can close the topic.
(translated from Polish into English using Google translator)

MacBook Air connected to a Laserjet Pro MFP but not printing

Hi, I am trying to print from an HP LaserJet Pro MFP M-125a which is connected to a MacBook Air via a USB cable. The software has been downloaded and the print job window is always showing as if it is in the process of printing the print job given but no printing is issued and the print job is seen as done. Can you please tell me what's wrong why the print outs are not coming out?
This question was solved.
View Solution.

Hi @Lilium ,
I see that you are having issues printing through the USB connection. I would really like to be able to help you resolve this issue.
Did you download and install the full software solution or run the Apple Upates?
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (LaserJet Pro MFP M125a )
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
How is the printer name listed?
If the issue persists, please try the following steps:
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer..
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
Try printing again.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet x64 mfp not fully printing

our printer is not printing a full page it has marks from the ink on the edge. There is about 3 inches it is not printing. We have tried everything we know of. we have a laserjet 400 MFP M425 PCL 6
Thank you,
Dawn

Hello pbnair.
Welcome to the HP Forums! I understand your Laserjet 100 Color MFP is stating "Not Connected".
Please follow this entire HP document on Printer Does Not Maintain Wireless Connection, as this could resolve your issue.
Please inform me your troubleshooting steps.
Looking forward to hear from you.
I worked on behalf of HP.

HP laserjet 3300 mfp has stopped printing

Similar Messages

Maybe you are looking for