HP LaserJet 3330 shows horizontal lines exactly every 1.5" when printing a completely white page
HP LaserJet 3330 shows seven or eight about 3.5" long cloudy horizontal lines spaced exactly every 1.5" even when printing a completely white page. This occurs also when copying and faxing.
There are also 2 very thin vertical lines running down the whole page approx. in the middle. They are exactly 1" apart.
However, a scan of a white page viewed on my computer (not printed) is completely clean.
Windows 7. No changes or upgrades.
This question was solved.
View Solution.
Propbably the toner cartridge if they are 1.48" apart it could be the developing cylinder or the charging roller that are both in the toner cartridge. So a good guess if you replace the toner cartridge, the problem will go away. The vertical lines could also be part of this issue.
Similar Messages
-
My problem is using the I Photo and printing a picture with horizontal lines going through it
Your topic title and topic content are a bit confusing? Are you printing a website page? That would be thru Safari or other browser.
Or is a photo from a website? If so how was it imported into iPhoto?
Also what system and iPhoto version are your running?
Does the photo print correctly from Preview or other application?
What's the pixel dimensions of the image?
How much free space do you have on your boot drive? -
after modifying a document in Pages ON MY IPAD AIR I found that there are horizontal lines across every line break when opened and saved it in DropBox. Does anyone know why?
Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long. -
Hello
My iphone 4S switches off after showing horizontal lines on the screen cutting through the apple logo during the restore process and then right after my iTunes shows the error 9 message, this happened 2 days ago when my phone just switched off unexpectedily and has been in this recovery mode since then. i have watched videos on Youtube and i have disabled Firewall before starting the process, i think i have done almost everything. please help anyone what do i do from here?
Just for interest sake i watched this video on youtube where this guy had the same problem but the difference is that he had it on an iPad. he opened the ipad up and did something on the ipad, it took less than a minute then his ipad worked.
I would appreciate it if someone would respond to this as fast as they can i am so stressed.
Regards
LwandoRead here:
http://support.apple.com/kb/ts3694#9
Error 9 is usually a security software issue. -
Hi Guys, my iphone 4 showing bad retina display and showing horizontal lines? What could be the problem???
Could be that your screen is damaged or dying. Only way to know is to bring the phone to Apple for evaluation.
-
My Safari is showing horizontal lines once in a while
I have a 15" MacBook Pro that's just over a year old. I started seeing horizontal lines in my safari window for a couple of months now. I have attached a screenshot below. Can anyone tell me what is causing this to happen? At first, I was seeing the very top of my Safari window flickering with thin colored lines. Now I am seeing what's attached below, probably once a day.
I want to know if something is wrong with my graphics card (which I don't think it is because it's only happening in Safari) or if something is wrong with my Safari.
Thanks!Only happens in Safari ... I would try these steps:
go to Safari (in the menu bar), and select Reset Safari...
next, Safari / Preferences / Extensions and turn off the extensions. -
My Iphone 5 Shows Horizontal lines
Should i go to apple store for replacement for my new iphone 5 for replacement. i record video for that issue so i can show to app store.
http://www.youtube.com/watch?v=Wrvte2c01cQ&feature=plcpi talked to apple care. as you suggest same thing they suggest and i did the same . .. but still getting same lines today.. as you can see in video shot today.
So what you suggest replace this one.. -
This problem does not occur when I open my Yahoo mail account in Internet Explorer.
Because of it, I cannot use Firefox to access my Yahoo mail.See:
* http://kb.mozillazine.org/Website_colors_are_wrong
* http://kb.mozillazine.org/Websites_look_wrong
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Photoshop cc photographs show subtle lines of variation in brightness across the width of the page.
I have tried this on 2 differernt Brother MFC 9970CDW printers, one of which is brand new. I have tried all the options in the printer dialog both in photoshop and the printer. I can print other photographs in inDesign and other products perefectly on the same printers. However, photos process in photoschop cc have the same problems even if place in indesign and printed from there.
Any chance you could post one of the photos that's causing this issue?
Are you using 8 bits/channel? Do you have Dithering disabled?
Notwithstanding what Chris has said, it may be that you've introduced posterization into your document by the way you've processed it. Perhaps it's just not as visible on your screen as in print. But without seeing what you are seeing we can't judge.
-Noel -
Missing Left line on all the invoices when printing from APPS
Hi Guys,
I need help here as i am learning XML. I customized one of my invoices RTF template and looks fine. When i generate the Invoice output from Apps through concurrent manager I am getting output with missing left line. When i tried to print from View Output its printing fine.
Is anyone came across this? Please let me know if anybody has solution.
Thanks in Advance,
KumarWhen you hit Print, is the dialog that comes up really small? If so, there's a triangle you can hit to the right of the Printer menu in the dialog that'll expand it to full size. This was something Apple added in 10.5 to simplify printing, but it's caused a lot of confusion.
If that's not it, are any of the menu items in the middle menu (the one that starts out saying "Layout") crossed out? If so, you're probably running in 64 bit mode and the printer driver probably does not work in 64 bit. If you're using the latest driver, then try launching Lightroom in 32 bit mode (in the Finder, do Get Info on the application and check Open in 32 Bit Mode).
If neither of those work, let me know.
-kevin
Adobe Lightroom Engineering -
Need to show leading zeros in the number field when printed from RDF
We have a requirement to show leading zeros in the rdf output.
We cannot use a format mask to achieve the same as the length of the field is not fixed.
for ex if we have 0.68 then the same is printed in RDF as .68
we cannot use a format mask as the length of the field is not fixed.
we need to
Kindly suggest if any solution exists for the same.the numbers after the decima can be anything..
it can range between 2 to 10 or more...
as told by you if we put the format as to_char(.68,'90.99') it shall give 0.68 but what for numbers like0.678,0.4567,0.765433 it will display only 2 digits after the decimal...
The requirement is to dispaly the number as it is ,only the zeroes before the decimal should stay intact..
we are not able to achieve this in rdf output..
if it is
0.678 then 0.678 shld be dispalyed
0.4567 then 0.4567
0.765433 then 0.765433
one format mask shld wrk for all the above..
we would not be changing the format mask for each number.... -
Deskjet 5525 printing random characters, one line per page when printing both sides of page
Hi. I have a deskjet 5525 wireless all in one printer.
I have installed all of the necessary hardware and have updated it. We have two computers running windows 7, 64 bit. I have not been able to update the firmware on the printer because the HP Device Updater program that does it cannot communicate with the printer via usb cable or wireless on two different computers I have tried.
When trying to print two sided documents, it will print ok for about two pages, but then, it will start printing on line per page of random characters, blurred lines of text, gargabe basically.
This is the second printer as the vendor replace the first one with the same problem. You would say, oh a software problem, but I have reinstalled the HP Deskjet 5520 series SW a couple of times, reinstalled the printer, but the problem continues.
An old HP deskjet 3845 worked for us pretty well on the same computers.
Please help.Hi Onemangosta,
I would like to help with the garbled text you are experiencing. I have found a great document for you to use and I can also help you with the firmware update.
Troubleshoot text that might be gibberish, nonsense, or look garbled or scrambled
In order to update the firmware on your printer ensure the printer is on the wireless network and touch the Web Services icon (this icon is the 1st of the 4 that run across the top of the front panel - looks like 2 little cell phones). Scroll through the Web Services menu, find and select Product Updates, select Check for Product Updates.
If the printer is already up to date the front panel will say so, if it is not, the download and install will begin. It is possible you were unable to do the update form the computer because the printer does not need an update. The HP Device Updater will only see a printer that requires the update.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Black line on the left margin when printing
The printing functionality for a coloring book app working
great in AS2. After porting to AS3 users get a black border on the
left side of the page.
Have anyone had this problem or know of any solutions?
Thanks in advance for your time.use a white object on the left side of your display
object. -
Horizontal line - Running out of options.
Hi guys. I can hope someone can help
I have a LaserJet 100 MFP M175NW printer that is around 2 years old. I am getting 1 horizontal faded line right through every page I print, black, or colour. It is always in the same position
I have the exact same printer which is in perfect working order so I have tried the following
1: Used a new photoconductor I know works
2: Ran a clean cycle (10 times) on the cartridges
3: Installed 4 new cartridges, from the printer I know prints perfect
I'm not sure what else it could be? I am happy to get my hands dirty if there is something else I can try. I am thinking it must be some sort of dust/residue build up somewhere but I am not sure where or what to clean.
Look forward to your help
Picture attached showing the line I have referred to.Hi @JSM87 ,
I see that you are getting a horizontal line in the same area when printing in color or black. I would be happy to help you.
Since you have already tried known good toners and a imaging drum, most likely it is the fuser or another hardware issue.
Please try the steps in this document to see if it will help resolve this issue. Steps provided are for running cleanings, calibrating the printer and printing off a Diagnostics Page and the Print Quality Page.
HP LaserJet Pro 100 Color MFPs (M175a and M175nw) - Resolving Print Quality Issues.
What were the results of the Diagnostics Page and the Print Quality Page?
Are you using Genuine HP Toner?
What are the toner levels?
Thank You. I look forward to hearing from you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Smart form footer issue in 2nd page - Horizontal line is not displayed
Dear Experts,
I am working on a smartform. Which has a table (Header, Main area, Footer), When there are more records and footer alone is printed in the 2nd page, i am not getting the first horizontal line for the footer and it does not look like a table in second page.
My smartform table exactly looks like this when printed in a single page.
|_________|______________|_________________|____________|________________|__________| - Header
|_________|______________|_________________|____________|________________|__________| - Main Area
|_______________________________________________________|___________________________| - Footer
When the footer alone is printed in second page, i want to print as
|_____________________________________________________|__________________________| - Footer
But its printed as
|_____________________________________________________|__________________________| - Footer
When the item records are printed in multiple pages, i will have header and item records in every page. The problem comes only when the footer alone gets printed in separate page.
Please suggest me how to fix this issue. Thanks in advance.
Rajesh.hi rajesh..
check the line type for that footer. It's getting displayed properly on multiple pages because the lower line of other rows is getting overlapped on the upper one of footer. This is why you dont recognize it.
On single page there arent any other rows. So it shows a blank.
So as samreen said make the top line of that line type bold.
Regards,
Sumit.
Edited by: Sumit Nene on Aug 28, 2009 7:02 AM
Maybe you are looking for
-
I repair and set up iMacs for donation and recently was setting up a 400 Graphite for donation to a video project. It originally had a 12GB HD in it and I told the client if he wanted a larger HD he should get one for me to put in. I told him about t
-
Hello, How do you query the model name of the module plugged in a cDAQ9172? Thanks, A
-
I Can't Open Tabs In Safari On My iMac?
In Safari, if you press command (apple key) T a new tab will open up. I use this feature a lot on my MacBook but this feature will not work on my iMac. I have to press "command N" and that opens up a whole new page. I would like to just have all of m
-
WRT54G2 V1 default gateway offline at seemingly random..
I use a WRTG54G2 version 1 router and had some internet problems before after I started using Windows 7, but thought I had it fixed by uninstalling AVG Free and doing a dns flush. But just now twice in a row my internet connection failed again. Some
-
Conversion Table: Image with Title
I'm using conversation tables to move from Unstructured FM8 to Structured (DITA) FM10. I am trying to move the existing tables and graphics with titles into the DITA structure. My understanding is that in DITA, it should look like this: So I've deve