HP Laserjet 3600 Series Printer with a blank or incorrect colour column down left side of page

Have a HP3600 Series Laserjet that has started to show a definite column (about 1/2" wide) of incorrect colour down the lefthand side of the page. Narrowed it down to the Magenta Cartridge after printing a diagnostics page.  Have replaced the Magenta Cartridge after doing calibrations and diagnostics and have also now replaced the Fuser Kit. Still the same - has anyone any suggestions?

Hi ProspeorusCE,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Similar Messages

  • Vertical black line with shade dots down left side of page - NEW Cartridge

    I installed a NEW cartridge and was able to print about 30 pages before the paper began having a 1/16" black stripe with shade(?) dots down the left side.  Could someone please advise.
    Thank you,
    Erin

    Thanks.
    I am very new to Pages. Yesterday I decided to go after a "Brochure" template, as it already had at least one vertical line separating text passages on the left and right. But there were too many sections, so I went about deleting all the extraneous, unwanted lines. And also the unwanted horizontal lines. To do this, you have to click the line itself to discover where the "nodes" are. But the nodes are locked, so you have to go to the top control bar of the desktop. (I think that this is the option titled "arrange").
    It appears that the secret to tinkering with the lines in the templates, is by unlocking the nodes to the lines, dragging them around, and then locking them in place again, saving them between major changes. In any case, none of this is going to be intuitive to users who come to the Mac from a text based 'DOS' universe. (I have absolutely no experience with Microsoft products, and would be lost if somebody asked me to do this from Windows.)
    Now, I think I am going in the right direction, and I appreciate your help, but I'm still having a little difficulty switching back and forth from editing templates, and typing text in. What are the sequences of keypresses for going back and forth from editing the templates, and typing the text in?

  • Fuser error for HP Color LaserJet 3600 Series Printer

    My HP Color LaserJet 3600dn  Printer have  Fuser error message.  What is the problem ?

    The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    You can also view the article related to this product here:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • HP Color LaserJet 3600 series (VISE Installer)

    Hi everyone,
    I made the mistake of using the VISE Installer that HP suggests as a download for the HP Color LaserJet 3600 series printer. I installed it, and then couldn't figure out why I still couldn't see this printer driver. After reading http://docs.info.apple.com/article.html?artnum=303057#hpdrivers and learning that the "driver" included for the Color LaserJet 3600 is not a "Modern Driver", I realized that installing the VISE installer from HP does me no good.
    Now, I have two questions:
    1) How can I uninstall this stuff that HP crammed onto my system? The VISE Installer seems like its a blast from the pre-OS X past, and doesn't appear to offer any sort of uninstallation. Do I need to write up a shell/AppleScript to read the log it writes to my / and remove the files manually? (I'd rather not do that, but I will if I have to).
    2) Is there a PPD that anyone knows of for this printer? I'd like to be able to print to it over our network, and I need a "Modern driver" (i.e. PPD) to do that.
    Thanks dudes!
    MacBook Pro 15.4"   Mac OS X (10.4.8)  

    To get a modern driver, you'll have to install a few open source packages. Try hpijs and ESP ghostscript from here:
    http://www.linuxprinting.org/macosx/hpijs/
    (I think you have to use the 3500 model choice/PPD).
    If that doesn't work, you'll have to compile the driver:
    http://www.linuxprinting.org/showprinter.cgi?recnum=HP-Color_LaserJet3600

  • Hp laserjet 1005 series printer drivers

    hp laserjet 1005 series printer drivers

    This worked for me in windows 7 professional 32bit SP1. Fresh install. I like my printer, I have used it for many years under both linux and windows and I had no intention of throwing it away. I am pleased I have found a way to make it work, I would have surely never bought HP again otherwise.
    How to make a HP LaserJet 1005 series work in windows 7 32bit
    1. download the printer driver HP LaserJet 1005 Host Based Driver v 5.51.2103.0 released 6 Oct 2003
    Right now it can be found here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?cc=us&prodNameId=214539&prodSerie...
    It is named  lj1005hostbased-en.exe - md5sum 428274e8060e830aeaf1acf06f10a398
    2. Extract the printer driver to a folder. (It is a winzip self-extract executable)
    3. Go to the printers page and "Add a new printer". It will ask you to select a port, but not an USB because USB devices are automatically detected. Scroll down and select "Virtual USB port" (not sure about the naming but you'll find it)
    4. In the installation of this virtual-usb connected printer you can say "I have the driver". Click on the button, point the printer dialog to the driver folder and select the .INF file in the directory (there are two, I used the first one). You will successfully install a second printer named "HP Laserjet 1005 series"
    5. Now right click the real printer, which has the same name but has the warning triangle because it needs "troubleshooting" - it has no associated driver. Select Troubleshoot. It will look for drivers. Skip looking online it is just a waste of time. NOW IT WILL FIND THE DRIVER YOU INSTALLED FOR THE VIRTUAL PRINTER. CLick OK.
    6. The danger triangle disappears, the virtual-usb printer with the same name disappears and you are lef with a printer named HP Laserjet 1005 series which... works!
    Cheers.

  • How to connect my cannon mx470 series printer with bluetooth to my mini mac?

    how to connect my cannon mx470 series printer with Bluetooth to my mini mac

    Does the printer actually support BlueTooth? If the printer is wireless, then most likely it uses Wi-Fi. Did you read the user guide that came with it? Or contact Canon tech support at their website.

  • Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    Has anyone found a workaround driver for using a Xerox WorkCentre PE220 Series printer with Mountain Lion?

    John -
    My "Use" menu only contains Apple print drivers.  And Canon drivers, from the location I set this machine up.  None for my home use....which is a Xerox machine.
    Not being on the menu, I don't know how to acquire this generic driver. 
    Any further helpful hints?
    I appreciate your thoughts and help.
    Lisa

  • Web pages are printed incorrectly, i.e. left side of page in p.1, right side on page 2. This started recently. Correct printer is identified.

    Firefox recently updated. Now, printing a web page results in left side printed on p.1, right side on page 2. Using the same Canon D9000 printer. Selecting horizontal format causes the left side of page to be printed 1/2 size on 1/4 page! Printing same web page with IE is OK. Printing from MS`Word is OK.

    All web pages? Or just some? Example of a page where that happens?
    Do those pages have '''Frames'''? <br />IOW, is the '''Print Frames''' section in the print dialog available (not greyed-out) for selecting '''''Each frame separately'''''?
    If that isn't a Frames issue, my advice is to do the '''reset''' described here. <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer <br />Make sure you reset all the prefs for that particular printer.

  • How to fix printer settings-only prints left side of page?

    how do i straighten out printer settings as printer only prints left side of page.i have a 2008 imac.   thank you 

    Have you contacted Canon Support? 

  • HP Color LaserJet 3600(not 3600n) with Fast Ethernet port - can I use it?

    Hello! There is a HP Color LaserJet 3600 in our company connected via USB with XP-based PC. Recently I decided that we need this printer be shared directly trough our ethernet network, so I started to learn manuals - its own manual, Jet Direct, and all that stuff. The printer's manual says that HP Color Laserjet 3600 does not have neither its own ethernet port, nor support for embedded print-server like JetDirect 620n.
    But! 
    Visual check  shows that this HP 3600 DOES have its own ethernet port and if I connect it to network or at least to a notebook - it blinks like any other ethernet port with "lights" should do. 
    However.
    Neither front panel, nor back panel says anything about network support(like letter "n" in model name).
    Configuration page print also does not know about that mysterious port.
    So my questions are:
    1. What is this port actually?
    2. Can I use it to share printer over network? Maybe, there is a way to upload 3600n's firmware somehow? 

    The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    You can also find the article pertaining to this product here:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
    (contains basic troubleshooting info, manuals, drivers, etc)
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • HP Laserjet 2100M not printing with 10.6

    Hi,
    I've been trying to print a document all evening on my HP Laserjet 2100M with the HP 100 Mbps network module. I've tried it on both my iMac and my MBP, no help there. The printer program is saying that it is sending the job to the printer, but the light does not even blink on the printer.
    Any idea?

    Hi Andrew, I'm back home!
    First I did a Telnet to the printer address and confirmed it had the right settings. All looked perfect to me.
    ===JetDirect Telnet Configuration===
    Firmware Rev. : G.08.49
    MAC Address : 00:30:c1:0b:a5:b9
    Config By : DHCP
    IP Address : 192.168.1.10
    Subnet Mask : 255.255.255.0
    Default Gateway : 192.168.1.1
    Syslog Server : Not Specified
    Idle Timeout : 90 Seconds
    Set Cmnty Name : Not Specified
    Host Name : REPLICATOR
    Default Get Cmnty : Enabled
    DHCP Config : Enabled
    Passwd : Disabled
    IPX/SPX : Disabled
    DLC/LLC : Enabled
    Ethertalk : Enabled
    Banner page : Disabled
    OK, I reseted the printing system. Then I added my HP LaserJet using the HP Jetdirect - Socket mode (as I always did in preview OS X version). I put the IP address of the printer, let the Queue name empty, Named the printer and the Print Using auto selected correctly HP LaserJet 2100 series. Then I clicked Add. The print dialog tried to "Connect" to the printer for Installable Options. This was taking forever to finished. So I clicked on Configure... and selected the options I knew was there myself.
    I tried then printing from Stickies (something simple), it told me the printer was busy. I put it off, then on, and retried and it worked... Try a page from Pages too, working...
    Maybe reseting the print system helped, because last week I also put the printer off then on, and the problem stayed there. Tried the same on my MBP, and it worked too! Cannot figure out what I did wrong the first time. Maybe I really needed to print something, and Murphy's Law came in!

  • Laserjet 3600 not printing black properly

    I have an old laserjet 3600 that I use for printing magazine pdfs, but it has developed a bit of a problem recently.
    It prints text fine, but when printing images the areas which would be solid black appear to be missing. Dark gray areas are fine though.  Its very hard to explain, but if I were to print a photo with dark shadows, then the lighter area of the shadow would be fine, but the really pitch black part of the shadow would come out white.  
    I've mainly printing from OSX, but have tried under Windows also.
    Does anyone have any ideas ?
    Are there any test pages I can print and scan to post here ?
    Many thanks in advance
    James

    I've had the same fault, formatter board temporarily fixes it for a week and then it comes back. Have also replaced power supply and formatter at the same time with only temporary joy.  Time for a new printer i'd say.  Gnu

  • HP LaserJet 3015 not printing with 10.5.6

    I just upgraded from 10.5.5 to 10.5.6 and my HP Laserjet does not print. I removed it and added it back but when I try to print it always gives me the following error when the printer queue is trying to connect:
    Printer busy (status:0xe00002e9)
    Please help.
    HGCali

    <Is this because i just upgraded to 10.5.6? </i>
    No, probably not. I have no problems printing to my 3015 from 10.5.6.
    Is apple going to do something about this?
    Doubtful since it's almost certainly not Apple's problem, per se. Make sure you have the latest printer update, HP Printer Update 1.1.1, which should appear in Software Update if you haven't installed it and will probably appear in the "Installed Updates" pane of the Software Update preference. And if course if it's a networked printer you'll want to ping it to make sure that your system is actually reaching the printer.
    If you continue to have problems, you'll probably want to take it up with your IT people or with HP. But you can keep an eye on this thread and see if suggestions to the OP would apply in your case as well.

  • Color Laserjet 3600 PQ print quality test pink shows faded on right side

    All the color print outs have this somewhat faded color on the right side.
    When I ran the PQ test under troubleshooting it shows on the pink page missing color pink towards the right side.
    fades into white / blank. Already changed the toner and still happens. I calibrated that printer twice and still occurs.
    what else can i do to fix this?

    Hi ProspeorusCE,
    The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Color LaserJet CP1518ni blue print with red shadows, help !

    Blue text prints with a red shadow on the right side of the page only.  There is no magenta in the blue.  All other colors print fine.  I have tried a new magenta cartridge and it was the same.  All cartridges are OEM.  I updated the firmware and it did not help.  Calibrted and cleaned many times.  Any ideas?

    Please be aware that this forum is a peer to peer support forum, it is not a direct link to HP support.
    I have a similar issue with a Laserjet cp1525nw, it was mostly corrected by removing and reseating the toner cartridges.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for