HP LaserJet 4 plus driver

The driver I have will not install, setup, or execute. So how do you get the driver into windows XP. This is the first time in 18 years I have seen this. It appears the driver is in DOS format. Hopefully I will get an answer before the weekends out. I could use something to go right.
Thanks in advance
Doug

OK, I just checked and the driver is available on Windows XP. 
How are you trying to add the printer?  Go to the Printers folder (Start, Control Panel, Printes and Faxes).  Under the "Printer Tasks" select "Add a printer".  Look under HP (not Hewlett-Packard) and select the Laserjet 4.
If there are error messages in the above process please indicate which step fails and the error mesage.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Hp laserjet 1020 plus driver for windows 98

    i want to download hp lasejet1020 plus driver for windows 98 ,on hp site win98 operating system are not available on list.
    Please send me driver on my email,because still i am using win98 for some necessary work which are not supported on upper verson.

    I did some research and found at one point Win 98, Win ME, and Win 2000 all used the same driver for this printer (atleast from what i could ascertain). Given that information, I would assume that the current available Win 2000 driver MAY work for Win 98 (can't be certain as I do not have a Laserjet 1020 plus to test this). Here is a link to that software if you wish to try it:
    http://goo.gl/ApsrA
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • HP LaserJet 1010 driver for Mac

    Good afternoon, everyone! I need your help!
    I badly need an HP LaserJet 1010 driver for Mac OS X 10.7. It has been written that PowerPC programms are not supported any more. Don't know how to cope with this problem.

    Hi,
    Follow these steps below to install the printer via Apple Software Update, the original CD is intended for older operating systems:
    http://h20566.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=3​...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Okay so I have a Seagate Backup Plus Drive External Hard Drive and I'm trying to get it to backup Applications and stuff on the dock such as iPhoto, and Photo Booth.

    It's one of these External Hard Drives. I go to the Finder folder and go to the "Seagate Backup Plus Drive" to see what's in there and what I assume is that backups but the only thing that seems to be in there is folders from everything that is Desktop and a few Documents. The Applications folder seems to be empty and there are no folders for Photo Booth or iPhoto. Everything from GarageBand and iTunes seems to have been backed up according to the Seagate Backup folder when it is plugged in and opened. How do I get this thing to backup everything from Photo Booth and iPhoto? And by the way, I can't seem to access Time Machine the way you get it to where you can go back in time and see all of your stuff from previous dates. I don't know if this is important or a crucial part but I seem to not be able to access the actual time Machine Layout.

    Simple on that one - Download Carbon Copy and follow the steps below:
    if you have access to an external USB enclosure use it, or you can buy one for $10...
    install your new ssd in the usb enclosure - connect to your macbook...
    open disk utility and format/erase your ssd - mac os extended journaled.
    open carbon copy - clone your drive with it - source (your old drive) + destination (your ssd).
    once the clone is done, turn your macbook off - take old hard drive out - install new ssd in....
    turn your macbook on - if boot time is more than 40 secs to desktop - go to system preferences - startup disk and select your new ssd as the startup disk - restart your macbook - should be about 14 sec boot time now.
    install your old hard drive in your usb external enclosure and use it as a backup drive.
    good luck

  • Unable to write to Seagate Backup Plus drive on Mac

    I just installed a brand new Seagate Backup Plus drive on my laptop with the goal of being able to use it on Macs and PCs.Seagate's web site says this:
    Using the drive under MacOS and Windows
    If you want to use the drive under Windows and MacOS, simply leave the drive in the NTFS format that it has when shipped from the factory (say No to "Do you want to use this drive with Time Machine?", if prompted). Install the included software which has a special driver that will allow the NTFS partition to be read and written under MacOS:
    Plug in the drive.
    Open the Seagate Backup Plus or FreeAgent GoFlex icon that appears on the desktop.
    Double-click the Seagate Dashboard Installer.dmg (Backup Plus) or Mac Installer.dmg (GoFlex) file on the drive and follow the prompts.
    If the driver is not installed, then the drive will be read-only under MacOS.
    The installation process seemed seamless, but I was never prompted to download an extra driver and it would appear that the driver either didn't install or doesn't work as advertised.
    I've found a user forum via Seagate addressing the inability to write to a GoFlex drive on a Mac:
    http://forums.seagate.com/stx/board/crawl_message?board.id=UPHD_and_PU&message.i d=3360
    One solution was to download a different driver (http://www.macupdate.com/app/mac/24481/ntfs-3g), however when I tried this I got an error from NTFS-3G that said "NTFS-3G could not mount the Seagate Backup Plus Drive because the following problem occurred: /Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8). the MacFUSE file system is not available (71)"
    I opened up the user guide, which instructed me to download MacFUSE, but the driver still wouldn't mount.
    In the end, I simply re-formatted the external HD with ExFAT in order to be able to read AND write. Has anyone else had a similar problem, or found a different answer?

    I thought that those particular Seagate drives shipped with the Paragon NTFS for Mac utility? If not, it's a $20 investment that you need to make.
    Download and install and then format the drive as NTFS on your PC. Your Mac should then be able to both read and write files to the drive.
    Clinton

  • How to install HP Laserjet 1020 driver for MAC 10.8.5?

    How to install HP Laserjet 1020 driver for MAC 10.8.5?  When I upgraded from Lion to Mountain Lion, my ability to print disappeared.  Where can I get a driver that works?  Thanks.

    See:
    Re: HP laserjet 1020 no driver for mac
    Re: How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

  • HT201250 Is their a way to only backup my photos on my Backup Plus Drive for MAC?

    Can anyone tell me if and how to only backup my photos on my "Backup Plus Drive for Mac" by Seagate, through Time Machine?

    Welcome to Apple Support Communities. We're all users here.
    In my opinion, Time Machine is a general program to back up 'everything', on an hourly, daily, weekly, and monthly basis, not really intended to back up only specific files or folders. In fact, Time Machine preferences are designed to help you EXCLUDE certain files and folders, rather than specify which ones to INCLUDE.
    There are many alternatives. These are two I've used successfully:
    Though not specifically designed for backup, iPhoto Library Manager from Fat Cat Software can duplicate, move, and also rebuild your iPhoto library file. It is available for US$29.95 from fatcatsoftware.com
    For backup, I use an older free version of a program called Carbon Copy Cloner from Bombich Software that will permit you to back up files, folders, and and even create a bootable 'clone' of an entire hard drive. The current program release is no longer free, and is available for US$39.95 directly from Bombich Software Store. http://www.bombich.com/

  • Seagate Backup Plus Drive 2TB not sorting storage

    I have the Seagate Backup Plus Drive 2TB. When I go to plug it in and I look at my Storage it says 272 GBs of Other, I know it's all movies and some back ups, So is the a way I can get it to sort my storage like it does with the internal HD ?
    Thanks guys

    This may help:
    http://support.apple.com/kb/ht2409
    Ciao.

  • Seagate Backup Plus Drive No Search Option

    I have the 500GB Seagate Backup Plus Drive, and Finder will not perform a search on the files in the hard drive.  When I try to search, the folder becomes blank as if there are no files.  Then when I ask finder to search a folder on my native hard drive, it works normally.
    Any recommendations?
    Thanks,
    David

    This may help:
    http://support.apple.com/kb/ht2409
    Ciao.

  • Creative ZEN V plus drive?

    Are there any ZEN V plus driver for Windows Vista?

    Ooooooooooooo i see. Is cuz i dont even use the CD that came with the MP3. I just plug and play. I?Sync. it with Windows Media Player . When I?wanna put videos into my ZEN, I can't cuz i need the program, the "ZEN V media explorer" or something like that. I did manage to intall it, but when i open the ZEN explorer,?it'sfreezez. And i have to restart my PC. So.........my bottom line, i dont use the CD, I CAN'T CONVERT VIDEOS,if i try to open ZEN explorer it freezez.

  • Video Blaster Webcam Plus Driver neededed

    Need: Video Blaster Webcam Plus driver for Windows XP

    shof55 wrote:
    Need: Video Blaster Webcam Plus driver for Windows XP
    Please stop posting duplicate and also please look at their driver download first before posting.

  • How to install hp 1020 plus driver on mac book pro os x yosemite

     dear sir please help me i got yosemite operating system along with mac book pro without knowlege i purchased hp 1020 plus printer now help me to install the driver of this printer to run the printer
    [Personal Information edited by Moderator]
    india mumbai
    vinod 

    Hi @vinya,
    I see that you need the drivers for the Laserjet 1020 plus for Yosemite. I would like to help you.
    The Laserjet 1020 plus printer is only supported on a Windows computer. There are no drivers available for any Mac operating system. Here is the website showing the available drivers. HP LaserJet 1020 Plus Printer.
    You can check to see if Apple has a compatible driver. This document provides the steps for running the Apple Updates.
    HP Printers - Installing a Mac Printer Driver Using Apple Software Update.
    You would have to get a printer that supports Yosemite.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp 1020 plus driver

    Just bought a hp laserjet 1020 and i can't seem to get it working. In printer setup utility it recognizes the usb connection but can't find the driver. Does anyone know how to get this to work? Thanks

    The LaserJet 1020 plus supposedly uses the same drivers as the LaserJet 1020 -- the foo2zjs drivers. You can get a Mac OS X installer for this printer and the other necessary software at OpenPrinting/MacOSX site. (They are relocating their servers this weekend, so keep trying if you don't get the page.)
    You will have to load the firmware to this printer every time it is powered up. Scripts for getting the firmware and loading the firmware are included on the disk image along with the driver.
    Matt
    Mac Mini G4; B&W G3/300    

  • Hp photosmart plus driver no longer working

    Hi all I have a photosmart plus came with an hp computer bundle used to work.  Now every time I go to try and make it work the following happens while installing the driver.
    a the driver installatiion stops/never completes
    b the driver installation can not see the wireless network or the printer when i plug in the usb cable, even though the computer sees the printer through the usb port and I can print through the usb port.
    This is on 2 computers the same crap I have no idea what to do.  I can not get the drivers to install and the only way I can print is by physically plugging the printer to a computer via usb and letting windows find it.
    Please help this is a giant pain in the ass.
    Fattyz 

    Sorry, I should have asked this earlier, what version of Windows are you using? 
    Since I don't want to waste too much more of your time with you waiting for me to reply, I will go ahead and give you two links of troubleshooting steps that I would recommend trying.
    The Progress Bar on the Software Installation Stops or Stalls
    'Device Setup Failed to Complete' or 'Unknown Device' Message Displays on the Computer in Windows Du...
    The first one addresses the issue of the software not completing. The second, even though the title might not seem like an issue that you are having, addresses the issue of the printer not being recognized by USB.
    Try those and let me know if either of them work. If they don't, get back to me with your version of Windows and I will see if I can find anything else to help you resolve your issue.
    If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos.  I really appreciate it!
    Best of luck,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HP LaserJet 1005 driver for Windows 8.1 x64

    Hello,
    I'm unable to install the HP LaserJet 1005 series driver on my Windows 8.1 x64. Here is what I've done so far:
    - downloaded ljP1000_P1500-HB-pnp-win64-en.exe
    - started the installer program
    - it successfully extracted installation data into C:\Program Files\HP\HP LaserJet P1000_P1500 Series
    - (the printer's USB cable is not yet connected)
    - A pop up window appears: "Waiting for user to connect the device."
    - I connect the USB cable to the computer. The printer is turned on. (The USB cable is OK - verified on a different PC)
    - However, the installer is unable to detect the connected printer. The following messages are reapeatedly written into the installer's log file:
    [ 4- 6-2014 14:35:21:085]- LOG(8F0): IsNewDeviceConnected(vidpidList with 6 elements)
    [ 4- 6-2014 14:35:21:153]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3D17)
    [ 4- 6-2014 14:35:21:220]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
    [ 4- 6-2014 14:35:21:287]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4817)
    [ 4- 6-2014 14:35:21:354]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
    [ 4- 6-2014 14:35:21:423]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4917)
    [ 4- 6-2014 14:35:21:492]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
    [ 4- 6-2014 14:35:21:559]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3E17)
    [ 4- 6-2014 14:35:21:625]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
    [ 4- 6-2014 14:35:21:692]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3F17)
    [ 4- 6-2014 14:35:21:760]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
    [ 4- 6-2014 14:35:21:828]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4017)
    [ 4- 6-2014 14:35:21:895]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
    - note that after connecting the printer's USB, the printer appeared in the Devices and Printers Windows view. However, when I click on Properties and Driver -> Hardware I get that no drivers have been loaded for it.
    It looks like the program cannot find the connected printer it this is causing the failure. Here is a download link to the full log file: log.
    I've also checked the following two threads which adress similar problems, but there is no workaround in there for my specific problem:
    - HP LaserJet p1005 windows 8 driver ?
    - Windows 8 driver for LaserJet P1005 printer? 
    Please advice on how to proceed in this situation. Please let me know if you need further information.
    Best regards,
    Atanas

    Hello Shindov,
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for