HP Laserjet 4 printer driver for mac osx 10.8.5

Anybody know of a mac osx 10.8.5 printer driver for a HP Laserjet 4?

Yeah, looked at this list earlier - they've got v. 19.8 for a Laserjet 4 Plus but mine is a plain Laserjet 4 so I doubt it would work. I used a Gutenprint driver v. 5.2.3 with Leopard that worked OK. Mountain Lion doesn't seem to like it as much...

Similar Messages

  • HP LaserJet 1010 driver for Mac

    Good afternoon, everyone! I need your help!
    I badly need an HP LaserJet 1010 driver for Mac OS X 10.7. It has been written that PowerPC programms are not supported any more. Don't know how to cope with this problem.

    Hi,
    Follow these steps below to install the printer via Apple Software Update, the original CD is intended for older operating systems:
    http://h20566.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=3​...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How to install HP Laserjet 1020 driver for MAC 10.8.5?

    How to install HP Laserjet 1020 driver for MAC 10.8.5?  When I upgraded from Lion to Mountain Lion, my ability to print disappeared.  Where can I get a driver that works?  Thanks.

    See:
    Re: HP laserjet 1020 no driver for mac
    Re: How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

  • Wireless Issues - laserjet pro cp1525nw for mac osx 10.7.3.

    I have just purchsed  a Laserjet pro cp1525nw for mac osx 10.7.3, I downloaded set up info for the new OSX with no problem.
    I come to the wireless set up and eventhough it has found my router and connected with printer I am getting the attached message!
    What can I do to solve this?

    Hello,
    Thanks for the post.  Interesting one.......Since it was was discovered, are they both on the same network?  I've included a link below with some great information on network installation with MAC.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02520151&tmp_task=useCategory&cc=us&dlc=en&lang​...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Samsung ML-1450 Printer Driver for Mac OS 10.5.4

    Hello!
    I would like to get Samsung ML-1450 Printer Driver for Mac OS 10.5.4. The old driver does not work with 10.5.4, Any help would be appreciated!
    Thanks.
    SMalkan

    http://www.samsung.com/us/support/download/supportDownDetail.do?group=&type=&sub type=&modelnm=ML-1450&language=&cate_type=all&mType=DR&dType=D&vType=L&cttID=213933&prd_ia_ cd=&dispnm=ML-1450
    It says it's for 10.2.4 or later or 10.4 (Huh?) but I just tried it and it worked.
    I printed through an Airport Extreme Base Station, but I imagine it should work via USB (or ethernet).

  • HT1338 I need a Ricoh SP 204SN printer driver for Mac OS X Mavericks. Can anyone help.

    I need a Ricoh SP 204SN printer driver for Mac OS X Mavericks. Can anyone help.

    This is a few years old, but it's the best I can do. I stopped using Windows many years ago.
    If you have specific questions, maybe I can answer, but remember I don't have access to any Windows newer than XP. I think setup will be similar, but I don't know if the Windows-side software will be compatible with W7 or W8.
    http://blog.iharder.net/2011/01/25/share-a-windows-printer-with-a-mac/

  • HP Deskwriter 600 Printer Driver for Mac 10.8 and above

    Anybody knows how to find the driver for the above quoted printer and operating sysgtem?
    Thank you!

    I have received the message I am pasting below.
    Data: 26 febbraio 2015 20:11:48 CET
    Da: HP Community Mailer <[email protected]>
    A: [edited email by moderator]
    Oggetto: You've received a private message on the HP Support Forum.
    HP Support Forums
    Join the conversation!
    Hello geobulga,
    You've received a private message in the HP Support Forum.
    From: JeffHelp
    Subject: HP Deskwriter 600 Printer Driver for Mac 10.8 and above
    Note:
    Hello geobulga,
    Can you please email me the following information? My email address is [email protected] Once I receive your response, I will forward it to my colleagues.
    Please include:
    - Your full name
    - Country location
    - Telephone contact number
    - Email address
    - Model and Serial number of your unit
    - Any HP Case numbers or HP Service Ticket numbers you may have been provided by Hewlett-Packard
    - HP Support Forum Username
    I look forward to your response,
    Best regards,
    [edited Reps name by moderator]
    Executive Customer Relations
    Hewlett-Packard Company
    Palo Alto, California
    However, I wasn't sure it was really sent by HP.

  • Help finding hp laserjet 1000 print driver for mac ox s 10.7.5 lion

    Any idea where I can find a print driver for an hp laserjet 1000 for my macbook pro OX S 10.7.5 lion? 

    Thanks for your response, this is what my printing options are:
    And here's what my Color Matching options are:
    I cannot find an option to change the ink cartridge in any of the other categories. Any suggestions?
    Thanks!

  • ADO Driver For Mac OSX?

    Hey All,
    I am working on building an application in RealBasic that will run on both PC and Mac. The app needs to connect to a MS SQL database. On the Windows dev side I would normally just use an ADO connection, but I haven't been able to prove definitively whether or not Mac OSX has an ADO driver (or supports that type of connection out of the box). I know I can use DSN connections, but I hate the idea of having to set those up on each machine the app gets installed on. Is there an open source, freeware, or inexpensive ADO driver for the OSX platform? Any help is greatly appreciated. Thanks!!
    mikeyv23

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP DesignJet forum here, that is where the DesignJet experts can be found.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How can I download a driver for a Brother printer HL2270DW for Mac OSX 10.9.1?

    I recently purchased a Brother printer HL2270DW and am running Mac OSX 10.9.1.  The brother website has a download available, but in the process of adding the printer I get the error message that "Can't install the software because it is not currently available from the Software Update server."  Any ideas?

    Just found a solution which involves resetting the printer settings:
    To Reset the Printer Setting:
    1) Open "System Preferences"
    2) Select the "Print & Scan" pane
    3) Right click (or control click) anywhere in the "Printers" window (in the white space below any of your existing printers)
    4) Select "Reset Printing System..."
    That will reset the printing settings, and should happen immediately. You'll know if it worked because any existing printers you had previously set up will disappear from your printers list. Once the system has been reset, click on the "Add printer" button and add the printer that you're trying to add.
    As any other printers you had previously added are deleted you'll have to add them again.
    Hope that helps

  • Hp 1100 laserjet printer driver for windows 7

    How to install Hp 1100 printer in windows 7?

    Hey farhanchd,
    What is the full name of your HP Laserjet printer?  
    There are several models in the HP Laserjet 1100 series and would need to know the exact name to give you precise instructions.  
    I do know that the Laserjet 1160 has a driver available through the Windows Update system and may be the same for your printer.  Please take a look at the information in the link provided below.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
    Hope this helps,
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Is there a Canon i960 photo printer driver for mac os x 10.7?

    trying to download the i960 driver for my iMac which is on os X 10.7 on canon.com. The download page only provide driver up to OS X 10.6. Anyone tried to make i960 printer work with OS X 10.7?

    According to this Apple article about supported printer drivers available from Apple Software Update, your i960 is listed. So if you connect the printer to the Mac via USB cable and the Mac is connected to the Internet, the driver should be downloaded and installed automatically.

  • Network Storage Drive for Mac OSX and XP

    Hi I am a new apple owner with a MBP 17 running OSX. I also have two other PC laptops in the house.
    I have a Linksys G wireless router.
    What I would like to do is to have a dual HD enclosure that I can plug into my wireless router so that I can share data between my MBP and my PC laptops via the network. I would like to use dual HDs so I can mirror them for back up purposes.
    My question is how do I set this up so both my MBP and PCs can use the same HD to store/share data? Suggestions on specific hardware to buy would be welcome as well.
    Thanks for you help,
    Vik

    You should simply get a network storage drive like this:
    http://westerndigital.com/en/products/products.asp?driveid=152&language=en
    you can attach to it a second USB hard drive for backup. If you shop around you'll get better price than directly from WD.
    Or you can go for Mirra which in my opinion is a much better bet as it will automatically backup folders you want and sync them between computers:
    http://www.seagate.com/products/retail/mirra/index.html

  • Ricoh c3501 printer driver for MBP OSX Mavericks10.9.5

    Recently, I just bought 13 inch MBP. After tried to installed the c3501 printer driver I used have, but failed. 
    The New MBP can NOT print to c3501 as I did at MBA.
    Please advise what I shall do to fix this?
    Thank you.

    I am going to do some combining of posts here.  I hope I can remember to get all that needs to be answered.
    I found the problem was at the "RicohUserCodes.command" executing order. I shall add printer first, then execute the script to change the user code.
    As greg mentions, you need to add the printer before using the script.  The script only looks at installed printers for eligible printers that have Ricoh UserCodes.
    Now, my NEW MBP with Mavericks 10.9.5 can print grayscale doc.
    You should now have the ability to print grayscale or color documents.  The choice is under the Printer Features section in the print window.  Many organizations will allow most users to print grayscale without a User Code.  They require a User Code only for color printing.  Other organizations require a User Code for all printing.
    After reading the comments, looks like there is a patch for GPL Ghostscript 8.63. As I execute the revision 8.7.1, can I apply the same patch to fix the double side printing issue? If yes, what is the procedure to apply the patch?
    No, you do not need to apply a patch.  I think you can assume that it has been incorporated into Ghsostscript 8.71.  Most of the time, all patches are incorporated into the next release.
    I found a problem on printing Win-Word document. If a word document file with section breaks, the printing job will be divided. This would affect double side printing. Any update driver to fix this issue? or ...
    I think that is a Word document problem only.  Does duplex work in all other cases?
    I think if you search other posts in the printing forums here, you will find similar complaints.  One idea for a work around that comes to mind is to save each section as a PDF and then combine the PDFs before printing.  I find that Word doesn't collate multiple copies of a document the way other applications do.
    greg sahli wrote:
    Unfortunately, there is a bug that will affect two-side printing.
    Read the comments here:
    http://www.openprinting.org/driver/pxlcolor/
    That page, like most of the OpenPrinting site, is ancient greg.  I am not sure much, if any of it, is still relavent.  How many years ago was Ghsoscript 8.63 and the CUPS PostScript driver that are mentioned on that page?  I would think that the CUPS PostScript driver has been improved since then.
    In any event, I added a printer instance for the Ricoh c3105 and did a print to file selecting duplex.  The duplex was set using a PJL command.
    @PJL SET DUPLEX=ON

  • Printer compatibility for Mac OSX

    Can my Apple Max osx 10.9.2 (Maverick) operate an Epson Printer
    Epson WorkForce WF-2510WF Multifunction Inkjet Printer

    Visit and/or contact Epson tech support & check out the following KB Articles: 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system

Maybe you are looking for

  • HT1386 I get an error message when I try to sync my iPod touch - "you do not have enough access privileges for this operation"

    I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync:  "you do not have enough access privileges for this operation."  It never did this before, w

  • Where Are the Printing Presets?

    I've got several printing presets created. I select a photo and click the print icon. In the print dialog that appears there is a Printer drop down menu and Presets drop down menu. Despite having several presets only Standard is in the drop down menu

  • XK99 Vendor mass maintenance

    Good morning, My request is very simple - I work in an environment where General data and company Code data are already created for vendors. MM module is going to be installed and I would like to create the Purchase Organization view of the vendors w

  • How to update a standard table

    Hi all, I want to update table makt with a program from table itab. Loop at itab into wa.       modify makt from wa. endloop. I even can not debug the loop... Is it not possible to update sap tables? Thanks.

  • OWB 10.2 Performance

    Hi all, We are using OWB 10.2 on AIX 5.3L, with Oracle DB 10.2.0. We are experiencing performance issues, in particular during mapping deploy. Sometimes, a deploy of a single mapping takes over than 5 minutes. In particular, we have discovered that w