HP LaserJet 400 color M451nw

Dear support,
The firmware link for HP LaserJet 400 color M451nw is not working.
May you please fix it, thanks.
regards,
Frank

There is no option to change what tray ePrint prints from.  
For now, it will only print from tray 1.  
However, you could load paper into tray 1 since it is currently left empty and change the default in the printer settings to tray 2 so that all print jobs (except for ePrint) will bypass tray 1.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • HP LaserJet 400 Color MFP M475dw Problems in OS 10.9.4

    I'm using a 2013 MacBook Pro, 2.4 GHz Intel Core i7, 9 GB 1600 MHz DDR3.  I connect via wifi to the referenced printer (for almost a year now).  Since updating to OS 10.9.4 I am able to print only one document at a time.  Attempting to print a second document generates the message "Printer is not connected."  If I turn the printer off and back on again, I'm able to print one document.  Then the same thing occurs again.  I have done the following so far, all to no avail:
    Downloaded and installed latest driver (specifically for Mavericks) from HP
    Checked for Apple software updates and found none
    Reset the printing system (per instructions elsewhere in these forums)
    I updated to OS 10.9.4 on July 5th and that is when this problem started.  Where do I go from here???

    And BTW, here's a repost of what I posted on July 7th:
    I'm running a 2013 Macbook Pro, 2.4 GHz Intel Core i7, 8 GB 1600 MHz DDR3, OS version 10.9.4 (updated to this OS version 5 days ago, on July 2nd).  For a little less than a year I've been printing to a HP LaserJet 400 Color MFP M475dw via wireless connection.  A few weeks ago I began to have numerous "printer is not connected" events, and it reached the point I could not print anything - from my MacBook, my iPad Air, or my iPhone 5S.  I discovered there was an updated printer driver on HP's website, specifically for OS 10.9.  Downloaded and installed it, and the problem was seemingly solved.
    Then I updated the OS to 10.9.4.  AARRRRGH!!!!!!  For the last 5 days, the printer will - sometimes - print the first document in a queue of 2 or more and then, while the printer is still "running," tell me the printer is not connected.  I turn the printer off and back on, get one print job, then have to repeat the process.  Here are all the things I've tried to resolve the issue:
    Verified settings on the printer to make sure everything is set up properly
    Restarted Airport Extreme, printer, and MacBook (multiple times) -- clarification:  I turned off both the MacBook and the printer, then unplugged Airport for a few minutes, replugged it, restarted the printer, then restarted the MacBook
    Reset the printing system (as suggested elsewhere in the Support forums), which basically removes all printers from the MacBook, then lets you add back those that you want - presumably with the most current driver(s).
    Searched help/support forums on Apple, HP, and the internet in general
    Found a firmware update for the printer on HP's website -- but it is not compatible with OS 10.9 (only goes up through 10.8).  I downloaded it and tried, even though 10.9 was not listed, and the "app" wouldn't even open.
    All of these efforts have been to no avail.  The problem persists, and I'm at my wit's end how to solve it.  HELP, please..........anyone??????

  • HP LaserJet 400 color M451dw asking password to login

    Hello,
    I purchased HP LaserJet 400 color M451 dw. after two months all the menu of this device disabled and it is asking password to login. i have in a big trouble. can anyone please help me how to reset this. i attached you the print screen. Thanks:

    As far as I'm aware, the LaserJet Pro 400 colour printer M451dn model does not support wireless connections; you'd need the M451dw model for that.

  • Hoping for repsonse from HP, re: Laserjet 400 Color MFP M475dw can not locate wifi network

    Greetings! 
    MY HP Laserjet Pro 400 Color MFP M475dw (9 months old) no longer finds any wireless network in my home. It worked fine then stopped for no reason I can determine. Nor will it print via USB cable direct from my PC.  I opened a case with HP on 9/1/14 for this issue (Case [Edited for Personal Information]) but have only received emails from HP asking for a valid phone number and the address of the printer location, all of which has been provided several times. The first email from HP gave me a phone number to contact HP but that number was missing a digit (1-890-946-500). Please help! This printer is the only color printer I have to use for my home-based small business. Thank you! Wendy [Edited for Personal Information]

    Hello @windypoo ,
    I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP LaserJet 400 color M451dn - help connecting wirelessly

    Hello,
    I am having the hardest time connecting my HP LaserJet wirelessly.  I bought it to be able to print wirelessy, but I cannot get it connected.  Does anyone have any suggestions?  It seems like this should be something very simple...
    Thank you,
    Ben

    As far as I'm aware, the LaserJet Pro 400 colour printer M451dn model does not support wireless connections; you'd need the M451dw model for that.

  • Disable sleep on HP LaserJet 400 color M451dn

    Hello.I have this printer set up as a network printer, connected directly to the network.I already know that this printer doesn't allow ACL. Bummer.Now I have another problem with sleep mode. It's constantly in sleep mode and it takes one minute for it to wake up and print any document. I've installed the latest firmware (date: 20150126), still it doesn't allow to disable the sleep mode, unlike it is shown on the manual. The best option seems to be setting the  delay sleep mode for one hour, but this isn't good enough for my users.Any ideas, please?Regards. 

    As far as I'm aware, the LaserJet Pro 400 colour printer M451dn model does not support wireless connections; you'd need the M451dw model for that.

  • Hp LaserJet 400 M451 replaced cartridges​, but they still read "low"

    I have an HP LaserJet 400 color M451nw
    When the cyan cartridge said it was low, I replaced it.  It then printed another 100 pages or so, without problems, then the printer told me the magenta was low , and I replaced it.  It printed a few more sheets, told me the yellow was low, I replaced it.
    Now, although 3 cartridges have been replaced, it tells me the cyan cartridge is empty, the magenta cartridge is at 20%, and the yellow cartridge is at 70%  (all 3 of these cartridges are brand new HP catridges)
    Now, it will not print at all, and insists the cyan cartridge is very low.
    I have inspected all of the cartridges, was sure they were seated correctly, and I have reset the printer several times.
    I cannot get the printer to "see" I have plenty of toner.

    [Disclaimer - I have little experience or expertise in printers that use the 02 ink cartridges.]  That said the issue sounds like one that would be caused by air in the plumbing.  There is a long thread here, reading through has a few reported successes from reseting the printer.  I would suggest reading and trying the steps in these posts:
    http://h30434.www3.hp.com/t5/Other-printing-questions/Ink-cartridge-empty-but-it-s-not/td-p/4101#m85... by longtimemacuser
    http://h30434.www3.hp.com/t5/Other-printing-questions/Ink-cartridge-empty-but-it-s-not/td-p/4101#m17... by GRO
    http://h30434.www3.hp.com/t5/Other-printing-questions/Ink-cartridge-empty-but-it-s-not/m-p/257743#M1... by sjwoolf
    http://h30434.www3.hp.com/t5/Other-printing-questions/Ink-cartridge-empty-but-it-s-not/m-p/564581#M3... by sparky2011
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Cannot print to HP LaserJet 400 colorMFP M475dw after updating OS

    I'm running a 2013 Macbook Pro, 2.4 GHz Intel Core i7, 8 GB 1600 MHz DDR3, OS version 10.9.4 (updated to this OS version 5 days ago, on July 2nd).  For a little less than a year I've been printing to a HP LaserJet 400 Color MFP M475dw via wireless connection.  A few weeks ago I began to have numerous "printer is not connected" events, and it reached the point I could not print anything - from my MacBook, my iPad Air, or my iPhone 5S.  I discovered there was an updated printer driver on HP's website, specifically for OS 10.9.  Downloaded and installed it, and the problem was seemingly solved.
    Then I updated the OS to 10.9.4.  AARRRRGH!!!!!!  For the last 5 days, the printer will - sometimes - print the first document in a queue of 2 or more and then, while the printer is still "running," tell me the printer is not connected.  I turn the printer off and back on, get one print job, then have to repeat the process.  Here are all the things I've tried to resolve the issue:
    Verified settings on the printer to make sure everything is set up properly
    Restarted Airport Extreme, printer, and MacBook (multiple times) -- clarification:  I turned off both the MacBook and the printer, then unplugged Airport for a few minutes, replugged it, restarted the printer, then restarted the MacBook
    Reset the printing system (as suggested elsewhere in the Support forums), which basically removes all printers from the MacBook, then lets you add back those that you want - presumably with the most current driver(s).
    Searched help/support forums on Apple, HP, and the internet in general
    Found a firmware update for the printer on HP's website -- but it is not compatible with OS 10.9 (only goes up through 10.8).  I downloaded it and tried, even though 10.9 was not listed, and the "app" wouldn't even open.
    All of these efforts have been to no avail.  The problem persists, and I'm at my wit's end how to solve it.  HELP, please..........anyone??????

    I also wanted to know if a HP M575f MFP is able to scan-to-email to MS Office 365 before buying the printer.
    Because I didnt find reliable information in the internet, I contacted HP Germany.
    Today they told me that HP printers don't support Office 365. The original wording was:
    'Allerdings wird Office 365 nicht von unseren HP Druckern unterstützt.'
     So far my present knowledge.

  • Laserjet 400 can't print envelopes ...

    All-
    We purchesed a LaserJet 400 Color (M451) nw printer last year, and printing regular documents works fine. However, we have a lot of problems printing "non-letter" documents such envelopes, 3x5 cards, and other items. We are not trying to load different trays with different paper products -- we just want to manally feed single items using Tray 1 and have them print as directed.
    The main issue is that the printer gives up before it even starts. If we create an envelope in something like Microsoft Word, and then press print, the printer automatially comes back with a "Jam in Tray 2" message before it even attempts to feed paper of any kind. Once we clear the message, it tries again, and usually prints a blank page from the normal letter-paper tray, completely ignoring our envelope sitting in the manually feed tray. The only way we have found to print these items, is to (1) open all paper trays and remove their contents, (2) re-insert all empty paper trays, and (3) manually feed the desired paper iteam (e.g. envelope) through Tray 1, and then it will work. 
    I miss our old HP printers that used to just work out of the box. (Sigh)
    Welcome comments.
    Seattle Expat

    Have same issue. HP salesman said put several envelopes in to raise the paper pile up higher so when it trys to grab the envelope it is easier to access. Also, don't forget to set the selection on your PC to the same size envelope that you are using. It won't print a #9 envelope if your selection is set on #10.
    Alternative: Fool the printer! Open Windows WORD to a blank document page. Go to 'mailings' (envelopes) - click on ADD TO DOCUMENT - -- it will give you an envelope on the screen above the blank page.  Type your address onto the envelope -  
    be sure to place your paper envelope into the printer tray and lay a blank piece of paper on top.
    When you click PRINT  -  The printer will grab the paper and pull it through as if you were printing a letter and the envelope will follow automatically.  Tah Tah!!!!   You have a printed envelope.   

  • HELP! My HP LaserJet Pro 400 color MFP M475dn printer will NOT print!!!!

    HP LaserJet Pro 400 color MFP M475dn- CE863A
    Printer is on a network and can connect to multiple computers that include: Mac OS X, Windows 7, and Windows XP.
    When I try to print from my iMac, the printer queue says "The printer is not connected".  When we try to print from the Windows computers, it just sits there in the queue and doesn't print.  When I go over to the printer itself and try to print either a demo page or a supplies page directly from it, it says on the screen that is printed it but nothing happens.  It doesn't hum or anything!  The port where the network cable is connected is lit green which HP says that means that the network cable is connected.  We have had this printer for a year now and something like this has never happened.
    I haven't switched any software or anything before this happened.  It was working fine on Saturday when we were using it, but when we came into work today, it just decided it would stop printing!
    I am stumped!  I tried 'pinging' the printer's IP address from my iMac and it pings just fine.  Does anyone have any tips?
    (I tried doing the obvious too- like turning the printer on and off and shutting the computers down- and nothing!)
    This question was solved.
    View Solution.

    Okay, so I'm feeling slightly stupid right now.  I decided I would shut the printer down for about an hour to see if that was it and what do you know- it was!  I had shut it off a few times before but I guess it just wasn't long enough.  What a pain!  
    Thank you to anyone who took the time to read this!  Sorry to waste anyone's time!!

  • HP LaserJet Pro 400 color MFP M475

    Hi
    I've a HP LaserJet Pro 400 color MFP m475dw that is often offline.  This is the first problem.
    Anyway, I've been trying to install the software from yestarday but it's impossible becouse the install program stays at 99% for a long time and than a fatal error message cames:"due to the lomg time ....."
    I cannot print, scan or fax anything.
    It's real bothersome.
    Can anyone help me?
    Thx

    @ammarch 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • HP LaserJet Pro 400 color Printer M451dn won't print

    My HP LaserJet Pro 400 color Printer M451dn stopped printing after a short usage of non hp toner. How do I get this printer to accept these toner cartridge ? My 3600dn never has a problem

    If you are using non-HP toner cartridges, then I would say that the onus is on the supplier of these to resolve the problem.
    Or to accept that these cartridges aren't quite as compatible as they've no doubt been advertised to be.

  • LaserJet Pro 400 color MFP(m475dw) needs rebooting to scan to network folder

    If our LaserJet Pro 400 color MFP(m475dw) sits overnight or for a good majority of the day without scanning to a network folder it will need to be rebooted before it will connect to the folder.
    I have tried adding a different folder and the same issue occurs.  The printer is connected to the network via wireless connection.
    Once the printer has been power cycled the scanner now works fine to the network.
    I would like to figure out why this is necessary and find a fix for it.

    Good day,
    To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
    Enjoy your day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Laserjet Pro 400 color printer M451dn Driver needed

    I need to install an HP Laserjet Pro 400 color printer.  When I plug in the USB - it provides a driver which I can open and get to the install process -  The process takes me to the point of plugging in the USB and starts to install.
    After 10 minutes and getting to 99% complete the install stops because it is taking to long.
    I have searched for the driver on the web site but when I click on the printer name - the HP web site goes into an
    Internet Explorer cannot display the webpage
    Need help with installing this printer - this printer is only available to me by USB

    If you are using non-HP toner cartridges, then I would say that the onus is on the supplier of these to resolve the problem.
    Or to accept that these cartridges aren't quite as compatible as they've no doubt been advertised to be.

  • Laserjet Pro 400 color MFP M475dw print in black and white

    Hello,
    I have a Laserjet Pro 400 color MFP M475dw printer that is contected to a network so that multiple users can print from it. I want to be able to restrict it so that they can only print in black and white and double sided. Is this possible? and if so could you please tell me how?
    I am not able to restrict them on a print by print basis, hence I am looking for a solution where I only have to make the change once.
    Thanks for your help!

    I understand you want to change a setting one time so that no matter who is sending the printer a print job it prints in gray scale.  Actually I found two ways to do it.  Here is the basic way to do it as described on page 16 of the User Guide.  Also, you could set up this printer to receive emails (ePrint) in gray scale only.  I just did a test after making changes in my ePrint settings at www.eprintcenter.com and no color was printed on a regular document containing color.  I hope that answers your question.  If not, let me know. I will be happy to explain greater detail.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

Maybe you are looking for

  • How to install iTunes 11.3

    When I try to install it, it says that I should download and install the setup of iTunes for the version 64 bits. I have already installed "iTunes64Setup".

  • Must Restart Frequently in Order to Regain Lost Internet Access

    Ever since upgrading my iPhone 4 to 4.1, I'm frequently having to restart the iPhone, because of the inability to connect to the Internet (even though "Cellular Data" is definitely turned on). This is getting to be frustrating. Is anyone else having

  • My code not give error nut not give pdf report output

    hi master sir see my code not give error nut not give pdf report output String reportSource = "./WEB-INF/reports/mfa.jasper"; String reportDest = "./reports/mfa1.html"; Connection conn = null ; Statement msqlStatement = null ; ResultSet mrs = null ;

  • SQL Server 2012 Edition required for my case??

    Hi, I am setting up a SharePoint 2013 BI environment with minimal servers. Below is the configuration: 1) WFE1 - Front End Server Role 2) APP1 - Application Server Role with SSRS 2012, SSAS in SharePoint mode.    SQL Server 2012 BI edition is used he

  • Microsoft file sync framework is not syncing deleted files

    Hi, I'trying to use Microsoft File sync framework to keep two folders in sync. Everything works good except when I delete a file in source folder its ot deleted on destionation folder on next sync run. I was expecting Microsoft sync framework will ta