HP LaserJet 4250 Drivers

my HP LaserJet 4250 printer giving a trouble,
some memory issues, as its a part of drivers i heard from a blog post
is it true i had to reinstall all my hp printer drivers or else its my system memory problem.
give me a feed!

Hi,
Would you please let us know current situation of this issue? Did you solve this issue via updating drivers?
Any update?
à
is it true i had to reinstall all my hp printer drivers or else its my system memory problem.
Did you receive any relevant errors or events? Those may help us to narrow down root causes.
By the way, please refer to following article and check if help you to troubleshoot memory issues.
An
Overview of Troubleshooting Memory Issues
Hope this helps.
Best regards,
Justin Gu

Similar Messages

HP Laserjet 4250 Network Printer Connection Issues

Hello
We have a HP 4250 Laserjet network printer set up as a shared printer on our Windows Server 2003 32-bit print server.
We are using the latest PCL 5e 32-bit drivers and have now added the PCL 5e 64-bit drivers to accomodate a new Windows 7 Pro 64-bit Laptop. However, although it appears to pull the driver across properly, it fails to communicate and complete the installation with the following error:
"Printer Cannot Connect Operation Failed' error 0000007e
I have apoplied the hotfix addressed which addresses a similar problem but this made no difference. http://support.microsoft.com/kb/981070/en-gb
Any ideas what I could try next?
Kind Regards
Simon Emms

Hello Tornado1,
The HP Laserjet 4250 is a commercial printer. To have a better chance at finding a solution, I recommend posting in the HP Business Support Forum.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

IP Printing and HP LaserJet 4250

I'm having difficulties to print to HP LaserJet 4250 via LPD protocol. Each and every time I try to print, the print queue stops saying "Jobs stopped".
If I tail CUPS error log I see this:
I [25/Oct/2006:15:00:29 +0300] Started filter /usr/libexec/cups/filter/cgpdftops (PID 5646) for job 2.
I [25/Oct/2006:15:00:29 +0300] Started filter /usr/libexec/cups/filter/pstops (PID 5647) for job 2.
I [25/Oct/2006:15:00:29 +0300] Started filter /Library/Printers/hp/filter/hppostprocessing (PID 5648) for job 2.
I [25/Oct/2006:15:00:29 +0300] Started backend /usr/libexec/cups/backend/lpd (PID 5649) for job 2.
E [25/Oct/2006:15:00:30 +0300] PID 5649 stopped with status 1!
I [25/Oct/2006:15:00:30 +0300] Hint: Try setting the LogLevel to "debug" to find out more.
I have deleted the printer and set it up again on Printer Setup Utility and downloaded new drivers from HP web site. It just doesn't work. Printing to old HP 2100 with LPD works fine so looks like Mac OS X does not like HP 4250 printer. Setting LogLevel to "debug" on CUPS does not offer any clues. What gives?
Power Mac G5 Mac OS X (10.4.8) HP LaserJet 4250

Yes I have, always the same error - please look at my first post.
I'm not sure if this is related to upgrade to 10.4.8, I updated from 10.4.7 to 10.4.8 at the same time the printed was switched to LaserJet 4250. To find out, I'm planning to grab a vacant Mac mini and test with Mac OS X 10.3.9 and then try 10.4.
A little Googling releaved the same error "PID XXXXX stopped with status 1!" shows that people have had the same problem with some Linux distros (Fedora, Ubuntu) - even with inkjet printers. Unfortunately the CUPS logs are not verbose enough to give details about what goes wrong. Apple documentatiion does not indicate CUPS was changed with 10.4.8 Update.
On the other hand, I discoved all the other printers on the server use WinPrint as printing engine but HP 4250 used HPZPP3zw. Default data type was RAW with both engines. But changing it to WinPrint had no effect.
Power Mac G5 Mac OS X (10.4.8) Windows 2003 Server

Hp Laserjet 4250

I have been having an issue with an older HP Laserjet 4250. It is smudging a little mostly at the top of the page in the middle. I have replaced the fuser, the toner cartridge, the transfer pad and the dc controller. Could the issue be with the power supply? I am running out of things to replace on the old girl.

Hi,
Would you please let us know current situation of this issue? Did you solve this issue via updating drivers?
Any update?
à
is it true i had to reinstall all my hp printer drivers or else its my system memory problem.
Did you receive any relevant errors or events? Those may help us to narrow down root causes.
By the way, please refer to following article and check if help you to troubleshoot memory issues.
An
Overview of Troubleshooting Memory Issues
Hope this helps.
Best regards,
Justin Gu

HP LaserJet 4250 will not print

I have an HP Laserjet 4250 that will not print from any of the 15 stations it is set up to. I send print jobs to it, and I have to power the cycle the printer in order for it to print. I have deleted and re-added the printer to the workstations, and still get the same issue. The IP address is correct the IP port is good, I have reset factory settings as well. Still will not print more than 2 jobs without it having to be turned off/on. Any suggestions???
Mike

you writed few informations: OS?, which type installation local IP or Print server?
try uncheck in tag advance: Enable advanced printing features

Unable to add HP Laserjet 4250 printer to my network

I've obtained an HP LaserJet 4250 printer to add to my home network. Plugged in the network cable, came up as an option on my "add printer" list. Clicked, was recognized, added to menu. When I try to print, item hangs in the print que and nothing happens. Printing out settings page from the printer, it appears the printer has an IP address not on my network! How to change the address. BTW, how do I find a list of IP addresses assigned by by Airport Extreme? It no longer seems to be an option in Airport Utility (v6.2)!
Using Mountain Lion (OS 10.8.3), iMac, Airport Extreme/Time Machine connected to Netgear ProSafe Gigabit switch.

Download the latest Driver and install it could solve the problem.
http://support.apple.com/kb/DL907

Hp laserjet 4250 printing blurry and shaded

hi guys
I am having an issue with my hp laserjet 4250 network printer, that its printing blurry and shaded
Like
the letters or words are printed correctly but below there are blurry letters or line
Can any body resolve this issue please?
Thanks
Moin

Hi there ,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP LaserJet 4250 paper loading speed has been dramatically slowed

We have a HP LaserJet 4250 and one day, paper was jammed via Tray 1. We managed to solve this but after this incident, paper loading via Tray 2 has the exact same speed as what would happen on Tray 1.
We tried to reset to factory setting on the printer but it wouldn't work. It prints fine but paper loading speed from Tray 2 is the same speed as the Tray 1. Does anyone know why this is happening? Thanks in advance.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I need older firmware for laserjet 4250 V.33.21.FF Firmware Date code: 20100718 08.180.3

I have an HP laserjet 4250 and am looking for the following firmware if anyone has it let me know please.
V.33.21.FF Firmware Date code: 20100718 08.180.3

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

HP LaserJet 4250 PCL error

Hi there,
I'll try and provide some background information first:
We use a HP LaserJet 4250 as a network printer and documents are sent to this printer via a server. Thousands of reports are printed daily and it is a mission cirtical printer (although we do have a backup).
The other day i recieved a call that amongts a few hundred documents (which had printed overnight) there was a single sheet of paper with the following error on it on the top right hand corner (and the rest of the sheet was blank):
PCL XL error
Subsystem: KERNAL
Error: IllegalTag
Operator: 0x4d
Position: 5578
We have never come accross this error before (we've had this printer for a very long time), and it has never occured since then. I was wondering if anyone could provide some insight on this matter? The reason i ask is because this printer is mission critical we dont want to have it go down; and would like to provent something serious from happening.
If anyone needs anymore information about the printer, I can try my best and see what I can find.
Thanks in advance!

This document may shed some light on the errors:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

HP LaserJet 4250 problems

I'm having difficulties printing to a printer on our windows network. The printer is a HP LaserJet 4250 and every time I try to add it, I have problems. Can anyone help?

The issue is that Leopard will not detect Windows printers via SAMBA.
Currently the solution is to use CUPS (Common Unix Printing System). This works directly on the UNIX layer to identify printers. There is a bug in Leopard that causes issues when you try to add network printers through system preferences.
Here is a great link with the instructions on how to setup CUPS properly: http://www.darrenwatt.com/blog/2007/12/30/connecting-to-shared-windows-printers- in-leopard-105/

HP Laserjet 4250 - While Printing PDFs with Watermark, Prints images as scrambled

Hi,
I am using HP Laserjet 4250 printer. While Printing PDFs with Watermark, the printer prints images as scrambled. It prints the part of the image as scrambled which is overlapped by the Watermark. The other part of the image is printed fine. When seen on the screen, it shows up the image with the watermark properly. Could you please suggest how to arrive at a solution for this problem. Thanks in advance.

Hi @Sebastian43
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP LaserJet 6L is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet 6Lse Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

LaserJet 4250

We have a moved an HP LaserJet 4250 printer from one office to another, but now we can't get excel files to print with content inside the grid. All of the boxes show up perfectly, with info in the correct boxes in the screen print, but once it is on paper, the content prints anywhere except in the boxes. This wasn't a problem before the move and connecting to differeent computers. Any ideas?

I hope you are doing well and welcome to the community
Your HP LaserJet 4250 printer is a commercial product. I will suggest researching and posting in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HP LaserJet CP1525nw drivers

I'm trying to install the 64 and 32 bit driver for the HP laserjet 1525 printer on a server. I can get to the page where the download is found, I extract the files and put them on the desktop of the server. When I go through the wizard in windows server 2008r2 to add the driver, I point to the folder where the driver was extracted, after digging through the folders, I cannot find the driver, or the .inf file. What am i doing wrong? Is HP providing the proper drivers for this printer on the website? Operating system is windows 7 64 and 32 bit. I was able to install the printer on the 2008 r2 server by allowing windows updates to install the driver. I want to add the 32 bit driver, and I also would like to update the 64 bit driver with the latest one from HP. Any help would be appreciated. Thanks

hi . I had the simalar problems of my HP b209a-m printer not being seen on my wireless network> I could not add the printer and could not get the printer to join my network, I found this post at HP discussion and it worked!
Each printer has different options/settings but it seems like the general idea should work ok if you can reset printer back to factory settings and find Printer IP Adress.
This is for HP printers
1. On the printer navigate to the Wireless or Network menu.
2. Select Restore Defaults.
3. On your computer look for a wireless network named 'hpsetup' and connect to it.
4. Print a Wireless Network Test from the front of the printer to see its IP address. (on my b209a-m Printer the IP info was found by pressing the Wireless Icon)
5. Type the IP address into the address bar of a web browser to see the printer's internal settings.
6. Click on the Network tab and look for the Wireless Setup Wizard and run it.
7. The Passphrase is the password you use on your wireless connection.
8. Now change the network name on your computer back to your wireless network.
The printer will now be connected to your network. With your the computer backyour wireless network network, you can re-add the printer from System Preferences.
Hope this works--- it did for me.
Jim

HP LaserJet P2035n Drivers for 64bit XP

So I tried to use the HP email and live chat support but neither worked because they said my p/n or s/n were invalid and I am pulling them off the printer itself. The issue I am having is with a HP LaserJet P2035N. It is hooked to the network and the driver for xp work the PLC5 ones. I have one computer that is running XP 64 bit and when I go to download the drivers for it there are no network driver for the printer only local drivers. I called the 1800 number and they gave me a website to go to that just redirected back to where I was. Any advice?

The model number HP LaserJet P2035N.
Method 1:
You may refer to the below links and use the troubleshooters. Check if it lists and helps resolve any issues: Open the Printer troubleshooter:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3662026&...
Method 2:
You may check if you have the latest drivers installed for the device. You may refer to the below link for getting the latest drivers and check.
Hp LaserJet P2035n Driver
Good Works..

HP LaserJet 4250 Drivers

Similar Messages

Maybe you are looking for