HP Laserjet 4500 desktop drivers not finding scanner after install.

First I have installed the
HP Officejet 4500 Desktop All-in-One Printer - G510a HP Officejet Full Feature Software and Driver
for a HP Laserjet 4500 Desktop
however after the installation has been completed and the section to where you can connect as a USB or wireless is given. I have selected to connect with a USB and the scanner will not show as connected when the installed of drivers have been checked and ready.
I have checked the device manager to see if the were installed drivers for the scanner but still not shown. I have checked to see if the scanner was in the view scanners and cameras menu and still none is connected.
I have powered off the HP and reconnected to another USB and reboot still not being recognized.
I am installing the wrong driver? Is there a step that I am missing? Can you help with a link to the correct software and or driver?
Thank you for your help and time!

@IAKELOC
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7

Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7 using the USB cable. Does anyone have any advise?
Post relates to: HP TouchPad (WiFi)

@MikeNTxs - 64bit USB drivers have been available since April of 2010, and they do work. I've synced successfully to my Vista64 bit laptop many times via USB.
See the sticky thread at the top of this section titled "64bit Palm Desktop drivers are here!"
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Error - "Can not find Microsoft Word installed.."

Hi,
I downloaded RH6 demo to test it, but can't generate a
printed documentation.
When I try, I only get an error message
"Can not find Microsoft Word installed on your system"
I have no idea why this happens. First, in the layout
settings I have set .pdf to be produced - DOC option is not
checked.
Also, MS Word is installed (Office 2003), and in Tools /
Options / HTML Editors Word 2003 is listed, with a correct path to
Winword.exe (which I reselected, just in case) .
This happens on Windows Vista Ultimate edition, UAC off.
Other layouts are generated normally.
Any idea how to fix it?
Thanks

RH6 is not supported under Vista.
I cover this in the article I wrote for Adobe's DevNet pages.
http://www.adobe.com/devnet/robohelp/articles/get_started.html
It is also covered in the Getting Started Guide that ships
with the product. A soft copy can be found at
http://www.adobe.com/support/robohelp/documentation.html
See also Snippets on my site where there is a reference to a
forum post about running RH6 under Vista.
When you installed RH6 did it find Word on your system then?
Did you install using your logon with admin rights attached?

AirPrint - iPhone 5 can not find printer after router change

AirPrint - iPhone 5 can not find printer after router change; however router is exact replacement of previous one (Zyxel, issued by Imagine wireless). AirPrint was working previously. Printer is on same network. Wireless printing working fine. Have tried rebooting prtiner, phone and router. Any suggestions?

I'd look to HP for support.
Here's an HP Airprint-related trouble-shooting page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03314085&tmp_task=solveCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=5271613
Lots more info on the HP support site.

Has anyone's screen go blank and not boot up after installing the new yosemite OS

has anyone's screen go blank and not boot up after installing the new yosemite OS

Hi Mofimac,
Thanks for visiting Apple Support Communities.
If your Mac is only starting up to a blank gray or white screen after updating OS X, you can find some useful troubleshooting steps in this article:
Mac OS X: Gray screen appears during startup
I recommend going through these first three sections first:
Disconnect, test peripheral devices and network cables
Perform a Safe Boot
Reset the NVRAM / PRAM
Best Regards,
Jeremy

'CRT not initialized' error after installing MS Office 2010

Hi,
I encountered 'CRT not initialized error' after installing MS Office 2010. I think that with previous version of CVI there were no problems. But, with Labwindows/CVI 2012 error has outbroken. The details are as follows.
- OS : windows 7 Enterprise (32bit)
- Labwindows/CVI (v12.0.0 (422))
- MS Office 2010 (word, powerpoint, excel)
#1. clean install windows 7 (32 bit)
#2. install Labwindows/CVI v12.0.0 and device drivers (DAQ, Motion)
#3. compile and run attached test program : SUCCESS
#4. online update windows 7 (service pack, explorer 9, and etc)
#5. compile and run attached test program : SUCCESS
#6. install MS Office 2010
#7. compile and run attached test program : 'CRT error'
#8. uninstall MS Office 2010
#9. compile and run attached test program : SUCCESS
I think there are some conflicts between office 2010 and labwindows v12.0.0. How can I solve this problem?
Thank you in advance.
Attachments:
step7-CRT error.jpg ‏31 KB
test program.zip ‏3305 KB

More specifically, I decided that some parts of MS Office files and features of NI's motion library conflicts. Because in the attacted sample program, if I exclude NI-Motion functions then the program excutes nicely. But if I include NI-Motion fucntion, for example flex_select_signal, then the 'CRT not initialized' error occurs.
To solve this problem I tried step by step installation check for MS Office 2010. During each step I included more optional features in MS Office and after each installation I compiled and executed my sample program. At finally, I found that the addtional part of MS Office 2010, if I install Office Sharing Function>Microsoft IME(Korean), then the 'CRT not initialized' error occurs.
Temporarly, I solved the problem with NOT installing 'Office Sharing Function>Microsoft IME(Korean)' optional feature in the MS Office 2010.
Could you tell me why this problem occur?

Logic pro not starting up after install.

Ive tried to install Logic pro twice and both time it will not start up after install. can someone tell me what is the best way to install this program correctly? should i just pay apple more money to install the program for me?

I have exactly the same problem. Whilst 8.0.1 would hang during startup without displaying the splash screen intermittently 8.0.2 crashs every time a few seconds after displaying the splash screen.
Although my computer is almost 6 years old it is perfectly adequate for audio work. I hope this is fixed soon. Unimpressed with the quality control.

Can not open itunes after installing latest version update 11.2

Can not open itunes after installing latest version update 11.2

See Troubleshooting issues with iTunes for Windows updates.
tt2

HP Envy 700-214 desktop drivers not ready for Windows 10 Prime Time

Really disappointed in HP for not being ready for W10 rollout. I upgraded my HP Envy desktop PC 700-214 and after the upgrade, I could not connect to the internet. Didn't recognize the networking hardware. Went to HP Support (on different computer) and found out here aren't W10 drivers yet for this machine. Very Poor.My wife has a Dell laptop and we have another older Dell that upgraded no problem. Why because Dell is on top of their $__t when it comes to this stuff.Won't by HP again.

MrDimplz wrote:
Really disappointed in HP for not being ready for W10 rollout. I upgraded my HP Envy desktop PC 700-214 and after the upgrade, I could not connect to the internet. Didn't recognize the networking hardware. Went to HP Support (on different computer) and found out here aren't W10 drivers yet for this machine. Very Poor.My wife has a Dell laptop and we have another older Dell that upgraded no problem. Why because Dell is on top of their $__t when it comes to this stuff.Won't by HP again.Did you not try to reinstall the last support Drivers into Windows 10 to see if it works? Also with the lastest Windows HP will probably not support redoing drivers for older system as that will be cost prohibited to do. And it will be up to the Endusers to find the right drivers and software that matches their system to work with Windows 10 assuming they work with Windows 10. As to Dell that is something only Dell can answer that question and since we don't know if this is Dell Consumer or Business product since this falls outside of HP forums to discuss. You can't expect to have drivers if your system is too old to support Windows 10.

HP Officejet 150 mobile, HP scan does not work (Can not find scanner)

Hi,
I just bought a HP Officejet 150 Mobile All-in-One. I installed the complete software package (downloaded from HP Site) with bluetooth on a windows 7 Acer Aspire S5 laptop. Printing seems to work fine, but when starting HP Scan, i get the following error message:
Saing that the software can not find the scanner with suggestions to solve it.
Is it possible to scan with a buetooth connection? Any other suggestions what is going wrong?
Best regards,
Roelof Crevecoeur
This question was solved.
View Solution.

Hello Roelof Crevecoeur,
Scanning is not supported through a Bluetooth connection, only printing is available for such connectivity, You will need a USB in order to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03137985&tmp_task=setupCategory&cc=us&dlc=en&lc...
NOTEcan functions are not available through a Bluetooth connection. Scan functions are supported only through a USB connection.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Photoshop not finding scanner

photoshop recognizes my printer, but not the scanner part. When I choose File-Import, it is not listed, but if I choose to print, that part is ok.I scan a lot. I am also working with a new computer,with WIN 8.1, which is complicating everything

You need scanning software installed on your Mac. Unfortunately, it appears your scanner does not have any HP drivers for Macs. It's a Windows-only scanner. There is a third-party product you can try that is supposed to support your scanner - VueScan.

ITunes recognizes iPod, Desktop does not, Finder does not

My iPod does not show up on the desktop. In Finder, I have no iPod showing. I went through the Five Rs, looked at the Apple troubleshooting sheet, changed USB ports, nada. Plays fine out of the dock, in my truck, etc. I am a newbie to all things Apple from the computer side, so bear with me id I left anything out.
Thanks.

Unless you "Enable Disk Mode" or use Manual updating, the iPod won't show up in the Finder on the desk top. Only in iTunes.
Patrick

Why my mac can not find scanner(mfp m127fw)

wifi printer works fine now,but i can not see scanner drive nor sofeware.
even on the printer screen, i do not see a scanner.
scanner won't work wifi

Hi @suwanee70,
I see by your post that you can't scan over the wireless network. I can help you with this.
What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Check to make sure the correct driver is installed.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
If the proper name isn't listed, delete it and add the printer name back in from the list.
Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
From the Printers and Scanners window, highlight the printer, you should have a Scan tab, then select Open Scanner. If it isn't listed, let me know. Here is a screen shot, but it is a different model.
What is the printer name listed as?
If the issue persists, connect the printer to the Mac by a USB connection and try and scan. Just to rule this out.
Let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can not start x after installing nvidia 173.14.x drivers [SOLVED]

After installing nvidia-beta (version 173.14.05-5) I am unable to start x. I receive the errors:
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
I have tried the installer directly from nVidia itself and I receive the same results. Any help is appreciated. Thanks.
Last edited by vytalelementz (2008-08-26 16:11:11)

nvidia-utils-beta was installed, also my GPU is listed as supported on nvidia's site.
Here's the whole xorg log file just in case:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux ve1.vytalworld.org 2.6.25-ARCH #1 SMP PREEMPT Fri May 16 14:52:43 CEST 2008 i686
Build Date: 22 May 2008 06:09:07PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 2 13:29:09 2008
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e0900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 147b,1c12 rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 147b,1c12 rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 147b,1c12 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 147b,1c12 rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 147b,1c12 rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0059 card 147b,1c12 rev a2 class 04,01,00 hdr 00
(II) PCI: 00:06:0: chip 10de,0053 card f47b,1c12 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 147b,1c12 rev a3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 147b,1c12 rev a3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 147b,1c12 rev a3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0291 card 3842,c564 rev a1 class 03,00,00 hdr 00
(II) PCI: 05:07:0: chip 104c,8023 card 147b,1c12 rev 00 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0204 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[b]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xfe900000 - 0xfe9fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:11:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xfe500000 - 0xfe5fffff (0x100000) MX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xfe400000 - 0xfe4fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00007000 - 0x000070ff (0x100) IX[b]
[1] -1 0 0x00007400 - 0x000074ff (0x100) IX[b]
[2] -1 0 0x00007800 - 0x000078ff (0x100) IX[b]
[3] -1 0 0x00007c00 - 0x00007cff (0x100) IX[b]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xfe700000 - 0xfe7fffff (0x100000) MX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xfe600000 - 0xfe6fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:13:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00008000 - 0x000080ff (0x100) IX[b]
[1] -1 0 0x00008400 - 0x000084ff (0x100) IX[b]
[2] -1 0 0x00008800 - 0x000088ff (0x100) IX[b]
[3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfe300000 - 0xfe3fffff (0x100000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xb0000000 - 0xcfffffff (0x20000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(--) PCI:*(1:0:0) nVidia Corporation G71 [GeForce 7900 GT/GTO] rev 161, Mem @ 0xfc000000/24, 0xb0000000/28, 0xfd000000/24, I/O @ 0xac00/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[1] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[2] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[3] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[4] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[5] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[6] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[12] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[13] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[14] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[15] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[16] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[17] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[18] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[19] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[20] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[21] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[22] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[24] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[25] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[26] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[27] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[28] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[1] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[2] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[3] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[4] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[5] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[6] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[12] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[13] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[14] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[15] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[16] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[17] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[18] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[19] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[20] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[21] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[22] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[24] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[25] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[26] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[27] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[28] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[18] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[29] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[30] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[31] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[32] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[33] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[34] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.05 Mon May 19 00:30:52 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 173.14.05 Mon May 19 00:10:20 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[18] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[29] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[30] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[31] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[32] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[33] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[34] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[23] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[26] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[28] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[31] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[32] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[33] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[34] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[35] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[36] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[37] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found

Dynadock V10 - " error can not find installation file" INSTALL ERROR

Hi I have a toshiba dynadock V10.
Every time i try to install the drivers it says " error can not find installation file". I have downloaded the latest drivers and switched off my anti virus and shut off all running proiceses and no go. There are a few references to this on the internet but none has a solution.
I amn trying to install it on an equium U400 running windows 7.
Funnily enough it loaded on an old dell pc easily!
I have spent hours searching the net and there is no answer. I dont have anything showing in programs to uninstall.
Thanks

>Funnily enough it loaded on an old pc easily!
Hi
This means that drivers are ok and there must be something wrong with the system preinstalled on Equium U400.
How did you proceed?
Its important that you would NOT connect the Dynadock to the notebook before the drivers and software installation has not been finished.
Therefore you have to install the software firstly. Then after new reboot connect the Dynadock to the notebook and the installation would finish the next steps.

HP Laserjet 4500 desktop drivers not finding scanner after install.

Similar Messages

Maybe you are looking for