HP Laserjet 4600 dn, Jetdirect 615n

Hi everybody,
I have problem with printing pdf files (for example 2 sheet), or jpg files on HP Laserjet 4600 dn. Everytime I recive a message "82.0180 eio 2 error". I was changed jetdirect slot, and everything was working fine 2 months. Now, that problem is back.
Printer prints Word files (without any picture, only text) OK.

Hi @Mladen
I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Color LaserJet 4600dn Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

Old Laserjet 2100 with jetdirect 615n tcp/ip server disable

I make a cold reset on a laserjet 2100 and the card jetdirect 615n became disable.
I dont have an ip address, how can i enable it?

The cold reset will almost certainly have changed the IP-address to 0.0.0.0 (effectively inaccessible), although (I think) that it will also have reset the protocol to DHCP, so the printer should obtain a new address from a local DHCP server.
Print a Configuration page. If an HP JetDirect EIO print server is installed, printing a Configuration page will also print a second page that will show the network settings and status.
Press GO to print a demo page. The printer must be in the ready state.
I'm not sure if this also prints the Configuration page, or if you need to hold the Go button down for several seconds.
If the Configuration page now shows a valid address, you may be able to reconfigure the card by connecting to this address via a browser, or via WebJetAdmin (not sure), in order to change the address and/or protocol (e.g. to set a fixed IP-address - then have to reserve this in your DHCP server).

HP Color LaserJet 4600 PCL6 Windows 7 - 64bit

I can not find drivers for HP Color LaserJet 4600 PCL6. I'm running Windows 7 - 64bit. Why does this always have to be so difficult?

Hey there,
Here's a link related to the printer you are using:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=74303&pr...
Click - Obtain Software and follow the instructions within.
The driver that you need is provided through Windows Update, and should come natively with Windows 7.
Make sure you follow all the steps contained within
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Trouble in OS9 w/HP 5100 Laserjet via USB Jetdirect card

Hello, I'm stumped with this one.
I was doing some upgrading for a client this past week. His machine is a 400 MHz G4 tower, it was running 9.0.4 and he wanted to upgrade to 9.2.2. Everything went fine with the upgrade but now the HP 5100 isn't behaving.
The Laserjet has the Jetdirect J4135A USB/Serial card and it was working flawlessly before the upgrade.
(I had no luck searching through the HP support site. I kept going in circles)
This is what is happening...
with the printer on and connected, I launch the Desktop Printer Utility and create a desktop printer, no problem. Next I launch the HP Laserjet Utility, click on connect to printer, the printer is listed, but once I click on it, the cursor just spins and spins...forever!
I know that the printer is okay, because I have printed with it through three other Macs (9.2.2, 10.3.9 & 10.4.3) But for some reason this particular G4 is fighting me!
Any suggestions would be greatly appreciated!
Thanks in advance.

YES!
I knew it had to be something simple that I was overlooking!!
That was it!
And the really stupid part is...I had dealt with that Suitcase issue in the past!
Oh boy, do I feel like an idiot!
But THANK YOU!
All I needed was a fresh pair of eyes!!!

HP color laserjet 4600 parallel port is wierd need help to identify

Hi I have a laserjet 4600 and it has a wierd looking parallel port and I can't seem to find out the name for it so I can buy it online. I have tried looking for it online but the only thing that comes up is the IEEE 1284 36 pin parallel port. Can anyone help me identify this port so I can connect it to my computer?
Thanks

dan4757 wrote:
I am running windows 7 64 bit trying to connect to a HP color laser jet 4600. We have tried multiple times to get a Notebook to load the driver. Everything works and asks to print a test page. When you press print test page nothing happens and nothing will print.
This is a working printer. It is presently hooked to a network and it works from it. I am trying to make it work from my notebook. I am using a ethernet cable wired directly to the Jetdirict card.
Do I need to set up a network. I know the IP of the printer and can not access it from the Notebook.
This should work for you. I've installed several printers using a Jet Direct this way:
Install the printer manually. Go into Devices and Printers -> Click "Add a printer" then select "add a local printer" and select the option for "Create a new port - Standard TCP/IP Port" and click next. Type the IP address of the printer into the Hostname/IP Address field then click "next" - Choose Hewlett Packard Jet Direct from the Standard drop down menu then click next. You will need to select your printer model/driver from the list and then click next.

LaserJet 4600 will not print black

My LaserJet 4600 has only 12-13,000 pages on it and will not print black ink. Magenta, cyan, and yellow print fine. The black cartridge works in my other 4600, and I've also tried the magenta in the black slot-- it will not print in that slot either...... Appears to me to be a hardware issue..... Any suggestions as to what the problem is, and is it something that I can fix? Or is it a job for a repair shop?........... Another aspect is-- is it cost prohibitive to fix?.. Thanks......................

Good day,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP LaserJet 6MP & HP JetDirect 300x connection problem

I've done a search and read these threads:
http://discussions.apple.com/message.jspa?messageID=11078808#11078808
http://discussions.apple.com/message.jspa?messageID=11086516#11086516
Still can't get my printer to print.
Here's my set-up:
I have an iMac and a HP LaserJet 6MP. I used to use the AsanteTalk gadget (and an AppleTalk cable), which enabled my printer and iMac to communicate perfectly via an ethernet cable and the ethernet port on my computer. Now I've upgraded to Snow Leopard. So, I read the discussions here, and purchased the HP Jet Direct 300x (from eBay... it took me two tries, 7 days for the auction to end and another 4 days for the thing to be delivered).
What I've done so far:
Purchased a parallel cable for the printer.
Connected the cable to the printer and the JetDirect.
Connected the ethernet cable from the the JetDirect to the iMac's ethernet port.
Hit the "test" button on the JetDirect to get the "Configuration Page".
FIRST, using the same ethernet cable I'd been using with my AsanteTalk, it gave me an IP address of "0.0.0.0". Then I tried changing to a different ethernet cable. (I'm not sure what the difference between the two are, other than one is yellow and one is orange.)
Then I got the Configuration Page printout of: "IP ADDRESS: 192.0.0.192"
(which I discovered from the HP website is one of two factory defaults for this device.)
I tried going to "Add Printer" in my "Print & Fax" settings.
I chose the Protocol: "HP Jetdirect - Socket"
In the IP Address field, I tried typing that IP address, but then all I get is the endless Status window that says "Determining Installable Options..." and "Status: Connecting to printer..."
I went to the "Network" settings and under "Ethernet" it has sayings "Configure Using DHCP" and has an IP Address that starts with 169... so I tried putting that IP address in the Add Printer field. That didn't work either.
So, now what?? I've been unable to print for two weeks and it's maddening.
Your help would be much appreciated.
Thanks!

It sounds like you figured it out, but the HP JetDirect 300x needs to be connected to your Network, not directly to your Mac. If your AT&T DSL/Cable Modem doubles as a router with additional Ethernet ports, you plug the HP JetDirect 300x into one of the modem's available Ethernet ports. The router will assign an IP address to the JetDirect. You then print the configuration page for the JetDirect to see the IP address that it was given. Then you add the Printer to your Mac using the IP option, and the HP JetDirect-Socket selection. Type in the IP address in the top section, and then choose HP LaserJet 6P/6MP - PostScript for the PPD file in the lower section. You can also change the IP address in the lower section to re-name the printer as HP LaserJet 6MP before clicking the Add button.
If the AT&T Modem only has a single Ethernet port to connect to your Mac, then you would have to buy a Cable/DSL Router (such as the Linksys WRT54G) to connect additional computers (and the HP JetDirect) to your modem, essentially creating your own home network to share your internet connection. It sounds like your AT&T Modem has additional Ethernet ports since it also features Wireless access.

COLD REST ON LASERJET 2100 WITH JETDIRECT 600

i HAVE TRIED A COLD RESET BUT IT DOES NOT SEEM TO RESET THE JETDIRECT CARD. THE PROCESS I USED WAS TO HOLD DOWN THE JOB CANCEL KEY AND THE TURN ON THE PRINTER, AFTER ALL LIGHT ARE ON I RELEASE THE JOB CANCEL KEY AND LET IT DO ITS THING. wHEN I PRINT OUT THE CONFIG PAGE THE IP ADDRESS DOES NOT CHANGE. i CAN NOT CONNECT TO THE NETWORK BECAUSE OF A CONFLICT WITH OUR PHONE SYSTEM. ANY IDEAS ON HOW TO RESET THE PRINTER.

how you do JCarroll;
HI hope you are doing well and sorry to hear that you are comfromting this issue.
Quick suggestion.
Since yout LASERJET 2100 is a commercial product. I will suggest posting in the forum for HP Business Support as well for yet a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Job prints but is then stuck in queue - LaserJet P1102 with JetDirect 175x print server

Hello,
I have an unusual error happening when i try to install my P1102 through a print server. Everything installs ok and allows me to print a test page, the next document i try to print prints ok but the job remains in the queue and stays there. After a couple of minutes saying Printing it then says Error, and any other attempts at printing get stuck behind this job. Then, if i dont delete the job in error from the queue it will print this document every 10 mins until deleted or i switch the printer off!
The set up is a LaserJet P1102 attached to a JetDirect 175x print server, PC running Win7 x86
Things i have tried:
- Install on another pc. Tried both Win 7 x86 and x64
- Changed print server for known working one
- Connected via USB, printer works fine
Any suggestions? Thanks in advance

Hi CompassCC,
The jetdirect 175 is a commercial line product. Check out the support documentation from the link below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
You may want to repost your questions on the commercial support forum at the links below.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Laserjet 1020 via Jetdirect 175x - help needed

Hi, I've have a small Mac network and I'm trying to setup my hp Laserjet 1020 via a USB hp Jetdirect 175x (I know this isn't a very Mac friendly printer).
I followed the advice given in another discussion here (thank you poekim) and with an older hp laserjet 1022 driver I got the printer working fine by connecting the USB directly to the Mac. So I know it can work.
I just can't get the printer to work correctly via ethernet / jetdirect. Using the Printer Setup Utility I select 'HP Jet Direct - Socket' under Protocol and enter the IP address (it confirms the address is a 'Valid and complete address'. However the driver does not appear in the HP list under 'Print Using' and when selecting 'Other' I can't find the 1020 driver in Library/Printer or admin/Library/Printer.
I can log on OK to the Jetdirect's Embedded Web Server via Safari.
I've installed, uninstalled & re-installed and the driver several times but can't seem to find it on the system.
I got my hp Officejet working fine via a Jetdirect.
I'm using a Mac Mini G4 with OS X Server 10.4.
Any help would be appreciated. My OS X knowledge is limited - but I'm always willing to learn !
Thanks in advance.

Drivers HP provides for its USB printers are limited to USB Only. You need a third-party CUPS driver to be able to print via IP printing. Your printer is one of the harder ones to set up. Read here:
http://www.linuxprinting.org/showprinter.cgi?recnum=HP-LaserJet1020
You will need the foo2zjs driver plus Foomatic, plus ESP ghostscript:
http://www.linuxprinting.org/macosx/foomatic/
Good luck.

How to install HP Color LaserJet 4600 Networked to Windows 7 (64 bits) ?

I am running windows 7 64 bit trying to connect to a HP color laser jet 4600. We have tried multiple times to get a Notebook to load the driver. Everything works and asks to print a test page. When you press print test page nothing happens and nothing will print.
This is a working printer. It is presently hooked to a network and it works from it. I am trying to make it work from my notebook. I am using a ethernet cable wired directly to the Jetdirict card.
Do I need to set up a network. I know the IP of the printer and can not access it from the Notebook.

dan4757 wrote:
I am running windows 7 64 bit trying to connect to a HP color laser jet 4600. We have tried multiple times to get a Notebook to load the driver. Everything works and asks to print a test page. When you press print test page nothing happens and nothing will print.
This is a working printer. It is presently hooked to a network and it works from it. I am trying to make it work from my notebook. I am using a ethernet cable wired directly to the Jetdirict card.
Do I need to set up a network. I know the IP of the printer and can not access it from the Notebook.
This should work for you. I've installed several printers using a Jet Direct this way:
Install the printer manually. Go into Devices and Printers -> Click "Add a printer" then select "add a local printer" and select the option for "Create a new port - Standard TCP/IP Port" and click next. Type the IP address of the printer into the Hostname/IP Address field then click "next" - Choose Hewlett Packard Jet Direct from the Standard drop down menu then click next. You will need to select your printer model/driver from the list and then click next.

I get an error 79.00FE on my HP LJ5100. I'm connected to the network via HP JetDirect 615n

Is this a formatter or a Jetdirect card problem?

We are getting the same error (79.00FE Printer Error) on our HP LJ 8000 and HP LJ 8100. We have mixed 32 bit and 64 bit computers on the network connected to those printers. The error seems to arise when a 64 bit (Windows 7) user tries to print a Google map. Unplugging the network jack, turning the printer off, deleting the print job from the queue and then reconnecting and turning the printer back on temporarily solves the problem. Does anyone know of a more permanent solution?

Hp laserjet 4600 paper issue!!!!

Hi, the issue that i have with this printer is that sometimes i gives three to four extra blank pages everytime someone prints in it, i checked the paper tray 2 (where the printer feeds from) and i noticed that one of the paper holders on the tray was not holding anything causing the extra paper to come out, what i did was to place it the way it was and worked fine but here comes my question, since this printer is not supported by HP anymore is there anyway to give a permanent solution to this because it has happened not really often but lets say every two weeks.

Sorry, I don't see any real permanent solution here short of replacing the tray.
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

HP Laserjet 4600 - Print Quality on Photos

Ever since I got this printer, it has ALWAYS printed it's demo page (fishing gear) perfectly, but almost never prints a photo very well.
I'm not very knowledgable about making the adjustments necessary.
Is this a common problem?
I'm trying to print on plain paper, XP-SP2. I recently added 256MB of memory to the printer, but the photographic printing was always marginal.
Any suggestions or advice would be appreciated.
That demo page looks great though! Just don't get it!
Message Edited by ShadowAndMax on 03-13-2009 07:10 PM

try resetting the settings to default

Laserjet 5000 (with jetDirect 620n): spooling from Windows 7 too slow

Hi,
i've installed new drivers for Windows 7 (32 and 64 bit) from HP website but however spooling is too slow. I tried all of drivers (PCL 6, PCL5 and PS). Only the PCL5 driver have an adequate standard of quality.
What i have to do to increase print performance?
Thanks
Alessandro

BUMP!

HP Laserjet 4600 dn, Jetdirect 615n

Similar Messages

Maybe you are looking for