HP LaserJet 4MP Poor Printing
The venerable HP LaserJet 4MP had been printing well (via LocalTalk and an AsanteTalk to serial converter), until recently...
Then it started printing too light (shades of grey instead of black), and I replaced the toner cartridge with another (HP brand unit), but with no improvement.
Shook the cartridge, reset the darkness controls using the 4MP's front panel menus, reset the AsanteTalk converter, removed and replaced the printer driver (PPD) in "Print and Fax" Preferences, tried using a different paper stock, changed and restored the darkness setings (REt) in the "Print" dialogue -- all without success.
Strangely, once in awhile (unpredictably as near as I can tell), the device prints a fully dark image or text (and this doesn't seem to depend on the app).
(I thought the laser printing engine was enclosed as part of the toner cartridge, so I can't think of anything I can do, as a non-technical person.)
I'm looking for clues from anyone who's had this experience, and who's resolved the problem!
Many thanks!
If it's not the Printer itself, which it sounds like at the moment, then about the only thing it could be is ColorSync setting in the Print Dialog or Colorsync Utility itself.
Similar Messages
-
HP LaserJet 2600n poor print quality/streaking
I am the original owner of an HP LJ 2600n with a poor print quality/streaking issue. The poor print quality occurs with any and all paper that I use (currently Hammerhill 20# stock) and occurred with Windows XP and Windows 7. The print cartidges are all genuine HP and changing them does not make any difference. I have cleaned the front door roller with no improvement. My firmware version is 20070716. The black cartridge is at 33%; yellow 75%; cyan 91% and magenta 91%...
Any advice would be appreciated. An example of the output is attached below:Hi everyone,
I have resolved my problem. I took a leap and purchased a new toner cartridge, and the new catridge works great. Installed it yesterday and the test page comes out clean, clear and with no double image. I'm happy.
Apparently the printer had not had a print item sent to it in over a year. I think that was actually hard on the toner cartridge.
Tthanks to everyone for their help via private emails!
mark -
Laserjet 1020 Poor Print Quality printer unused for long time
My Laserjet 1020 sat unused for a long time
I ran cleaner sheets through it
I changed the toner cartridge
I cleaned the inside with a vacuum and air duster (it was not dirty though)
I still get this. Consistently. No change in quality.
What could I have missed?
Thanks43,
Ink has a limited life span. It is sad, I know. The ink in the printer may just be "old" beyond it's actual age.
I have an old J6480 that I use only occasionally -- it is such a good printer that I keep it in spite of the fact that I might have to change out the cartridges more frequently than when the unit actually runs out of ink.
You might change out the cartridges so you are not coating the insides of the printer with the old ink.
If you are not going to use the printer very often, it does seem to help to keep it stored in a cabinet: dark and enclosed where there is not an abundance of light, dust, dampness, or temperature differences. I keep the J6480 in a cabinet on the other side of the house and use it wirelessly about every six months.
You may have to re-run the cleaning operation a couple of times after you do change the ink; change out the cartridges, test, and then decide.
Click the Kudos Star!
It is a nice way to say “Thank You” for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur -
My old LaserJet 4MP is printing beautifully. I have just fixed a series of malfunctions with removal of paper debris and a cold reset.
But one problem remains. After printing a document the printer no longer returns to a READY state. Instead a document name with a number prefix remains in the window. I have to do another reset to clear the document description out of the buffer. Then the printer re-starts, runs its SELF TEST and reverts to READY. While the document description remains I cannot go offline but I can continue printing other documents in the print queue until finished. Then I get a plain sheet chugging out with an error message. (see below).
According to my manual, The number prefix is not an error number, it appears to be a document counter number as it increases with each print I make. it is up to 106 now.
When offline I can run ALL print tests and come up with perfect results.
I would have thought a cold reset would fix this problem by returning the software to factory settings. Apparently not. Window simply shows:
89 Tony ANZ Lodg
I have been using the printer so the last print was:
106 Tony GreeceL
So I get a counter number, My name and a document description as far as 16 characters will allow.
Sometimes, as in the last document a second sheet prints displaying;
ERROR: timeout
OFFENDING COMMAND: timeout
STACK:
This error prints every time I printed a document. I visited all the items in the JOB MENU. I re-set JOB MENU items but no change in printer behaviour.
Normally after printing a letter the Printer switches back to the READY state. Now the document description remains in the window and can only be removed by a cold reset, I cannot go OFFLINE because the window will not clear and revert to READY. It is interesting that the reset presumably clears the buffer but even a cold reset does not change the document counter number. How does one access this data I ask?
The printer is networked via a D-Link DP-G321 WiFi print server connected via serial cable to the LaserJet 4 MP. My G5 iMac and a G4 desktop both access the print server via WiFi. I have trashed and replaced the printer drivers and print proxy preferences on both the G5 and G4 computers to ensure the glitch is not transmitted from the computers.
I assume this can be fixed via the printer onboard software. Can anyone help me fix this problem?Anyone know if this will also work for 10.5.6? As obviously Apple has not fixed this issue yet!
I need advice on this since I cannot print from Illustrator at all ever since I reinstalled HP drivers 1.1.1 at Software Update's Recomendation.
QUOTED FROM A PREVIOUS APPLE THREAD I FOUND DATED OCTOBER '08 (as follows)
Found a great solution to this on the Adobe User Forums that involves replacing the pstops file in 10.5.5 from the one in 10.5.4. Here're the steps:
Through trial and error, it appears to be a problem in the file located at:
/usr/libexec/cups/filter/pstops
If you copy that file from a working 10.5.4 installation then it should work. At least it does for me. Your mileage may vary, I'm not responsible, etc.
The easiest (and likely safest) way to do this is to download the 10.5.4 combo update from Apple.
http://www.apple.com/support/downloads/macosx1054comboupdate.html
And Pacifist:
http://www.charlessoft.com/
1) Mount the combo update DMG and open the .pkg file using Pacifist.
2) Navigate down to /usr/libexec/cups/filter/
3) click on pstops and hit "install" on the top left
4) enter your password
5) hit replace
That's it. Keep in mind I've only tested it on my main box, but I don't see why it shouldn't work for everyone else.
This likely will not break your install in case Apple comes out with a fix. If you're worried then just backup your 10.5.5 pstops file. (hit Command-G, enter /usr/libexec/cups/filter/ and copy the pstops file somewhere safe (or just rename a copy in the current location). You may have to repair your permissions. -
HP Laserjet 4mp won't print with Snow Leopard
My great Laserjet 4mp prints just fine with OS 10.5.8 but not with Snow Leopard (10.6.2) on my new iMac. Have spent three plus hours with senior level Mac Techs to no avail. The printer screen shows the correct printer and driver and indicating valid connection, but when attempting to print I get the message "Unable to print, try again in 30 secs". Since 10.6 doesn't have Appletalk, am unable to use it; techs have tried to use the 4mp driver supplied with Snow Leopard and also downloaded it separately from the web site. We (they) have also tried using all methods (IP, Daemon, and HP Jet Direct using Ethernet and Serial to USB connections). Techs have talked with HP techs and have no other solutions. The security system is off. Any suggestions are welcome! Thanks!
I've read the threads and don't understand some, but I think we (the Apple support techs and I) have tried the ones I recognize. One new idea--in a reply to a similar post someone mentioned being sure to use additional data when using the IP address-- submask address or some such, I
haven't been told to do this--should I? (I can get it from the printer readout if told what to get.) Also, in another post someone suggested deleting the OS 10.5.8 driver that was transferred when all the data from my old iMac G5 was moved over, saying that it would interfere. If true, how do I do that?
What I really need is a stepwise instruction on which connection to use (Ethernet, Serial to USB, or parallel port are the only options); which protocol to use (IPP, Line Printer Daemon, or HP Jet Direct socket, whatever they are); what to put in the Address line (the IP address is the one used by Apple techs); what to put in the Queue line (techs said to leave it blank); what to put in Name and Location blocks, if anything; and what to put in the Print Using line (techs have unsuccessfully tried Autoselect, Generic, and the HP4mp driver selected both from the Select Printer Driver option and from the driver downloaded directly from the HP web site).
I'd be grateful for this help or even advice on where I can get it! (With this new computer I still have free telelphonic Apple tech support but they've given up.) Thanks! -
Print to HP LaserJet 4mp via ethernet on Snow Leopard
Well, after tons of research I have ended up printing thru my OLD mac via shared printer on the network. But I would hope there is a better way. I have a Mac Pro, 10.6.3 connected to a HP LaserJet 4MP via ethernet router via RJ45 cables, works great on ALL my other equipment, even the PC but refuses to show up in Snow Leopard. I tried the standard stuff like giving it an IP address that would match my current network settings, no luck, tried Asante, no luck. I realize it's hard to support a decade old printer but what's all the GREEN CRAP about if I have to keep throwing away equipment that still works, and beautifully. Had to ditch my quad PPC unit because of adobe. Now I can't print. HP was no help, apple support is WAY too expensive since I bought my machine used and they won't sell me an apple care agreement. Anybody have any more suggestions? MIO must stand for missing instant output. ANY suggestions would be appreciated as I've tried all the ones in the discussion forums so far.
Since the 4MP is a PostScript printer, there should be any number of print servers that work with it. It might even work with your router. But it is not going to just "show up" on your computer like it did with AppleTalk. You will need to provide the computer with all the information it needs for an IP connection.
You can get help with that here, but you need to provide information, like the model of the router. -
HP LaserJet 4MP Printing Blank Pages
Hi there,
This is perhaps OT, but a recent issue with my HP LJ 4MP is causing me great anguish and heartache.
Suddenly, for no apparent reason, my HP is producing blank pages. It just runs and runs spewing out blank pages.
I've tried all the IO resets and a cold reset. Unplugging and leaving idle. Unplugged the Asante bridge between the serial and the CAT 5.
After a while I can get it to stop printing blank pages, it works fine for a while, then the interminable blank pages start again.
Has anyone seen such an issue? Any known resolution?
Thanks a bunch,
MatthewMatthew,
I too use HP LaserJet 4MP and AssanteTalk Bridge connected to computer via ethernet crossover cable and link from Assante to both my LJ4MP and HPDeskJet855cse, using BelKin QuikNet adapters in a string using RJ11 jumper cables.
My HP driver software is HP8.1.1.
I Never use "BackGround Printing".
I Never use "DeskTop Print Monitor".
The only time I can remember multiple blank copies is when I used to use "Print Monitor and BackGround Printing".
Clear your preferences and get rid of Print Monitor and Don't use BackGround Printing.
HTH.......Bob -
Connecting a 1994 HP Laserjet 4MP printer to my new iMac
Hello all. I just recently bought a new iMac, and I am having difficulty getting an older HP Laserjet 4MP printer to communicate properly with the iMac. I originally thought that I needed a parallel to usb cable, so I bought one of these, but the computer would work briefly for one print out and then fail to print again. I then read the printer's manual, and it indicates that if you are going to connect the printer to a macintosh computer you need to use a standard 8 pin localtalk cable. I still have my original localtalk cable from when I used to use this printer with an older powermac in the early 90s, but I cannot find on the internet, or in any stores, a female 8 pin to usb adapter.
Does anyone have any suggestions or thoughts on what I might try, or perhaps recommend a place to purchase the correct adapter / cable? I really like this printer and it has been working great, so I hate to get rid of it. Thanks in advance for any replies you all have. If I cannot come up with a solution I might just buy a new printer.D. P.
I wouldn't bother with any 8 pin arrangement as that is putting a further complication in the chain.
The Keyspan USB to parallel adaptor cable is on this page.
http://www.keyspan.com/products/homepage.2.productList.Parallel.spml
I have used this cable on three Mac OS's (10.2, 10.3 and10.5) without the need to load any driver for it. The Mac seems to know what it is.
However, if you can send a page to the printer with what you have, then I am unsure, if what you have is sufficient, or if the keyspan version somehow handles the Input/Output data transfer better.
I am reluctant to advise you buying this if it is not going to change anything without first investigating if the driver you are using is causing this one page then stop behaviour.
When you click in Print and Fax, highlight the HP and where is says Kind it may say
Generic postscript Printer, whereas it would be better if if said GutenPrint v5.13.
However I did not have to do anything to get this setting, Leopard just found it.
You could select the printer again, with it switched on and in the left hand panel, control click and choose Reset printing System, as this may reset the driver to GutenPrint.
If that fails to set it, click on *Open Print Queue* ... then Info, then click on Driver and select GutenPrint v5.13 from the list, and see how that goes. -
Can't connect to HP Laserjet 4mp
I'm in desperate need of some help and hadn't found any reference to this question in the forums.
I have a Macbook Pro running 10.6.4 connected to a D-link DI 604 router which is connected to an HP Laserjet 4MP printer. Ever since I upgraded to Snow Leopard I haven't been able to print. I keep getting a "Can't connect to printer message".
I've tried deleting the printer and reinstalling it, but to no avail.
I do have an older Imac on the network running 10.3.9 which has no problem printing.
Anyone have any idea what the problem might be ?My guess is your 4mp is connected to the older computer using Appletalk. Appletalk was removed from the MacOS as of Snow Leopard.
Two things I can think of to try.
1) Share the printer via bonjour using the 10.3.9 machine as a print server.
2) If you have an HP jetdirect or similar interface on the printer, use IP printing. You may need to set an ip address for the printer to do so.
3) assign an IP address and use IP printing using your router; I'm not familiar with the D-Link so I'm not sure if this is an option or not -
Serial to USB connection- HP Laserjet 4MP not recognised
I am trying to connect an HP Laserjet 4MP to my Intel iMac running OSX 10.5.8. sure its old, but it is solid and reliable. Slow does not concern me.
The printer worked fine when last used. I have just purchased a serial to USB cable for the printer as the printer originally used AppleTalk.
System Profile recognises the cable. The cable chip is a Prolific 2303 which I am told is Mac compatible and that seems confirmed as System Profiler lists the USB-serial controller. So why can the OS not see the printer?
Check the HP printer drivers? Of course! So far I have downloaded and installed 2 sets of printer drivers. The first was a Laserjet and Edgline print-only.mpkg. labelled OSX. Probably too old. The second, PrinterDriverUpdate v1.1.1 (350MB) from the Apple Archive. The Archive listed the 4MP in its list of drivers contained in the package. Can’t get them to work!
I cannot get bonjour to see the HP printer! I read elsewhere that others are using the old HP 4MP on snow Leopard so Intel and system compatibility would not seem to be a problem.
I found the HP site murder to negotiate and finally downloaded from Apple and AppleUpdate. If you know the correct HP URL for Mac driver downloades that may help. So far I have run into so many dead ends on that site I could fill an A4 page with criticism.
Does anyone have suggestions which may help please?
Update. I checked the printer drivers via manual driver selection and found the HP 4 plus v2013.111 driver which worked in the past. So the driver is there, why does Bonjour not see it? I click on add printer and nothing new is found!Helpful response as usual thank you BDAqua.
Network shows USB controller Not Connected. When I select and click window at left on USB controller (Which is red) the resulting dialogue box does not offer Apple talk. Just Modem,DNS, WINS, Proxies and PPP. Apple Talk is only offered for Ethernet or Airport.
Having had a nights sleep on this problem I conclude the serial port has died.
I think I shall return the serial cable and try connecting with a 36 pin Parallel port.
Thank you for the thought. -
HP LaserJet P1102W - no print output in Linux Mint 17.1 Cinnamon Desktop
I've just done a default install of Linux Mint 17.1 - as feared, no print output.
I'm guessing I need to install a driver - but I couldn't find anything easily on HP site, only Windows/Mac OS stuff. Are HP printers generally linux friendly? Where can I download drivers if they are? More over, I'm a total linux newbie, so any drivers need to be easily installed! I'm not currently familiar with Terminal windows and line commands!
My printer does have wireless enabled, but I have it connected via direct USB also.
Linux Mint did offer to run a diagnostic tool/debugging tool which gave a great deal of what means nothing to me. Debug output is below if it is helpful, but hoping a simple driver install will cure all ...
Debug Output:
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Is local server publishing?):
{'local_server_exporting_printers': False}
Page 3 (Choose printer):
{'cups_dest': <cups.Dest HP-LaserJet-Professional-P-1102w (default)>,
'cups_instance': None,
'cups_queue': u'HP-LaserJet-Professional-P-1102w',
'cups_queue_listed': True}
Page 4 (Check printer sanity):
{'cups_device_uri_scheme': u'hp',
'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'printer-info': u'Hewlett-Packard HP LaserJet Professional P 1102w',
'printer-is-shared': True,
'printer-location': u'Leela',
'printer-make-and-model': u'HP LaserJet Professional P 1102w, hpcups 3.14.3, requires proprietary plugin',
'printer-state': 3,
'printer-state-message': u'',
'printer-state-reasons': [u'none'],
'printer-type': 167948,
'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-Professional-P-1102w'},
'cups_printer_remote': False,
'hplip_output': (['',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mDevice Information Utility ver. 5.2\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mSystem Tray Status Service ver. 2.0\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mhp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a\x1b[0m',
'\x1b[01mDevice Parameters (dynamic data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' agent1-ack False ',
' agent1-desc Black toner cartridge ',
' agent1-dvc 0 ',
' agent1-health 0 ',
' agent1-health-desc Good/OK ',
' agent1-hp-ink False ',
' agent1-id 0 ',
' agent1-kind 4 ',
' agent1-known False ',
' agent1-level 100 ',
' agent1-level-trigger 0 ',
' agent1-sku 85A ',
' agent1-type 1 ',
' agent1-virgin False ',
' back-end hp ',
" cups-printers ['HP-LaserJet-Professional-P-1102w'] ",
' cups-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' dev-file ',
' device-state 1 ',
' device-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' deviceid MFG:Hewlett-Packard;MDL: LaserJet Professional P ',
' 1102w;CMD:ZJSJS,URF,PCLm,PJL,ACL,HTTCLSLSRINTER;DEHPHP ',
' LaserJet Presessional P 110;F;FWVER:20110826; ',
' duplexer 0 ',
' error-state 0 ',
' host ',
' in-tray1 1 ',
' in-tray2 1 ',
' is-hp True ',
' media-path 1 ',
' panel 0 ',
' panel-line1 ',
' panel-line2 ',
' photo-tray 0 ',
' port 1 ',
' r 0 ',
' revision 254 ',
' rg 000 ',
' rr 000000 ',
' rs 000000000 ',
' serial 000000000W4037X5PR1a ',
' status-code 1000 ',
' status-desc Idle ',
' supply-door 1 ',
' top-door 1 ',
'\x1b[01m',
'Model Parameters (static data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' align-type 0 ',
' clean-type 0 ',
' color-cal-type 0 ',
' copy-type 0 ',
' embedded-server-type 0 ',
' fax-type 0 ',
' fw-download False ',
' icon HP_LaserJet_1012.png ',
' io-mfp-mode 6 ',
' io-mode 1 ',
' io-support 10 ',
' job-storage 0 ',
' linefeed-cal-type 0 ',
' model HP_LaserJet_Professional_P_1102w ',
' model-ui HP LaserJet Professional P 1102w ',
' model1 HP LaserJet Professional P 1102w Printer ',
' monitor-type 0 ',
' panel-check-type 0 ',
' pcard-type 0 ',
' plugin 1 ',
' plugin-reason 1 ',
' power-settings 0 ',
' pq-diag-type 0 ',
' r-type 0 ',
' r0-agent1-kind 4 ',
' r0-agent1-sku 85A ',
' r0-agent1-type 1 ',
' scan-src 0 ',
' scan-type 0 ',
' status-battery-check 0 ',
' status-dynamic-counters 0 ',
' status-type 8 ',
' support-released True ',
' support-subtype 2202411 ',
' support-type 2 ',
' support-ver 3.12.6 ',
" tech-class ['LJZjsMono'] ",
" tech-subclass ['NoAutoDuplex'] ",
' tech-type 3 ',
' usb-pid 4138 ',
' usb-vid 1008 ',
' wifi-config 3 ',
'Done.',
['\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m',
'\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-systray requires Qt4 GUI and DBus support. Exiting.\x1b[0m',
'\x1b[35;01mwarning: Unable to connect to dbus. Is hp-systray running?\x1b[0m',
0),
'is_cups_class': False,
'local_cups_queue_attributes': {'charset-configured': u'utf-8',
'charset-supported': [u'us-ascii', u'utf-8'],
'color-supported': True,
'compression-supported': [u'none', u'gzip'],
'copies-default': 1,
'copies-supported': (1, 9999),
'cups-version': u'1.7.2',
'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'document-format-default': u'application/octet-stream',
'document-format-supported': [u'application/octet-stream',
u'application/pdf',
u'application/postscript',
u'application/vnd.adobe-reader-postscript',
u'application/vnd.cups-pdf',
u'application/vnd.cups-pdf-banner',
u'application/vnd.cups-postscript',
u'application/vnd.cups-raster',
u'application/vnd.cups-raw',
u'application/x-cshell',
u'application/x-csource',
u'application/x-perl',
u'application/x-shell',
u'image/gif',
u'image/jpeg',
u'image/png',
u'image/tiff',
u'image/urf',
u'image/x-bitmap',
u'image/x-photocd',
u'image/x-portable-anymap',
u'image/x-portable-bitmap',
u'image/x-portable-graymap',
u'image/x-portable-pixmap',
u'image/x-sgi-rgb',
u'image/x-sun-raster',
u'image/x-xbitmap',
u'image/x-xpixmap',
u'image/x-xwindowdump',
u'text/css',
u'text/html',
u'text/plain'],
'finishings-default': 3,
'finishings-supported': [3],
'generated-natural-language-supported': [u'en-us'],
'ipp-versions-supported': [u'1.0',
u'1.1',
u'2.0',
u'2.1'],
'ippget-event-life': 15,
'job-creation-attributes-supported': [u'copies',
u'finishings',
u'ipp-attribute-fidelity',
u'job-hold-until',
u'job-name',
u'job-priority',
u'job-sheets',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-hold-until-default': u'no-hold',
'job-hold-until-supported': [u'no-hold',
u'indefinite',
u'day-time',
u'evening',
u'night',
u'second-shift',
u'third-shift',
u'weekend'],
'job-ids-supported': True,
'job-k-limit': 0,
'job-k-octets-supported': (0, 476568600),
'job-page-limit': 0,
'job-priority-default': 50,
'job-priority-supported': [100],
'job-quota-period': 0,
'job-settable-attributes-supported': [u'copies',
u'finishings',
u'job-hold-until',
u'job-name',
u'job-priority',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-sheets-default': (u'none', u'none'),
'job-sheets-supported': [u'none',
u'classified',
u'confidential',
u'form',
u'secret',
u'standard',
u'topsecret',
u'unclassified'],
'jpeg-k-octets-supported': (0, 476568600),
'jpeg-x-dimension-supported': (0, 65535),
'jpeg-y-dimension-supported': (1, 65535),
'marker-change-time': 0,
'media-bottom-margin-supported': [423, 547],
'media-col-default': u'(unknown IPP value tag 0x34)',
'media-col-supported': [u'media-bottom-margin',
u'media-left-margin',
u'media-right-margin',
u'media-size',
u'media-source',
u'media-top-margin',
u'media-type'],
'media-default': u'iso_a4_210x297mm',
'media-left-margin-supported': [423, 635],
'media-right-margin-supported': [423, 635],
'media-size-supported': [u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)'],
'media-source-supported': [u'auto',
u'manual'],
'media-supported': [u'iso_a6_105x148mm',
u'iso_a5_148x210mm',
u'jpn_hagaki_100x148mm',
u'om_double-postcard_148.17x200.03mm',
u'om_jb5_182.12x257.05mm',
u'na_executive_7.25x10.5in',
u'om_16k195x270_195.09x269.88mm',
u'om_16k184x260_184.15x260mm',
u'oe_16k197x273_7.75x10.75in',
u'na_letter_8.5x11in',
u'iso_a4_210x297mm',
u'oe_flsa_8.5x13in',
u'na_legal_8.5x14in',
u'na_monarch_3.875x7.5in',
u'iso_dl_110x220mm',
u'na_number-10_4.125x9.5in',
u'iso_c5_162x229mm',
u'om_env-b5_176.04x250.12mm',
u'custom_min_3x5in',
u'custom_max_17x36in'],
'media-top-margin-supported': [423, 547],
'media-type-supported': [u'stationery'],
'multiple-document-handling-supported': [u'separate-documents-uncollated-copies',
u'separate-documents-collated-copies'],
'multiple-document-jobs-supported': True,
'multiple-operation-time-out': 300,
'natural-language-configured': u'en-us',
'notify-attributes-supported': [u'printer-state-change-time',
u'notify-lease-expiration-time',
u'notify-subscriber-user-name'],
'notify-events-default': [u'job-completed'],
'notify-events-supported': [u'job-completed',
u'job-config-changed',
u'job-created',
u'job-progress',
u'job-state-changed',
u'job-stopped',
u'printer-added',
u'printer-changed',
u'printer-config-changed',
u'printer-deleted',
u'printer-finishings-changed',
u'printer-media-changed',
u'printer-modified',
u'printer-restarted',
u'printer-shutdown',
u'printer-state-changed',
u'printer-stopped',
u'server-audit',
u'server-restarted',
u'server-started',
u'server-stopped'],
'notify-lease-duration-default': 86400,
'notify-lease-duration-supported': (0,
2147483647),
'notify-max-events-supported': [100],
'notify-pull-method-supported': [u'ippget'],
'notify-schemes-supported': [u'dbus',
u'mailto',
u'rss'],
'number-up-default': 1,
'number-up-supported': [1, 2, 4, 6, 9, 16],
'operations-supported': [2,
4,
5,
6,
8,
9,
10,
11,
12,
13,
14,
16,
17,
18,
19,
20,
21,
22,
23,
24,
25,
26,
27,
28,
34,
35,
37,
38,
56,
57,
59,
16385,
16386,
16387,
16388,
16389,
16390,
16391,
16392,
16393,
16394,
16395,
16396,
16397,
16398,
16399,
16423,
14],
'orientation-requested-default': None,
'orientation-requested-supported': [3,
4,
5,
6],
'output-bin-default': u'face-down',
'output-bin-supported': [u'face-down'],
'page-ranges-supported': True,
'pages-per-minute': 1,
'pages-per-minute-color': 1,
'pdf-k-octets-supported': (0, 476568600),
'pdf-versions-supported': [u'adobe-1.2',
u'adobe-1.3',
u'adobe-1.4',
u'adobe-1.5',
u'adobe-1.6',
u'adobe-1.7',
u'iso-19005-1_2005',
u'iso-32000-1_2008',
u'pwg-5102.3'],
'pdl-override-supported': [u'attempted'],
'port-monitor': u'none',
'port-monitor-supported': [u'none'],
'ppd-timestamp': u'*',
'print-color-mode-default': u'color',
'print-color-mode-supported': [u'monochrome',
u'color'],
'print-quality-default': 4,
'print-quality-supported': [3, 4],
'printer-commands': u'none',
'printer-current-time': u'(IPP_TAG_DATE)',
'printer-dns-sd-name': u'Hewlett-Packard HP LaserJet Professional P 1102w @ Leela',
'printer-error-policy': u'retry-job',
Hi @durandal,
I read your post and see that you need the drivers for the P1102w printer. I can provide the website for you.
Here is the link for the HP Linux Imaging and Printing website. HP Linux imaging and printing.
Here is the link for the P1102w drivers. HP LaserJet Professional p1102w Printer.
If you need more information, please post your questions at the Linux Distribution Forums.
If you appreciate my efforts, please click the Thumbs up button below.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Hp Laserjet Enterprises M806dn Printer
I have the above printer and recently purchased , after installtion this printer , i am not getting proper speed from this printer , as per manual it will print 55 pages /minulte , i am giving bulk printing , it is printing around 15 to 20 pages only , it is taking more time for spooling.
My operating system is windows xp 2002 service pack 2.
I have connected the printer is through LAN.
I have used this driver for installation HP LaserJet Enterprise M806 Printer Series PCL6 Print Driver
Please send me the solution.Hello @jksathish,
I understand your concerns. Unfortunately, for this type of printer, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue. Good luck.
I worked on behalf of HP. -
How to configure ePrint on LaserJet CP1025nw Color Printer
Solution found:
How to Configure HP ePrint on the LaserJet CP1025nw Color Printer
System: Windows (Widows 7)
Step 1 – Install Printer
Install the CP1025nw Printer to USB, Wifi or Ethernet.
(Printer needs to print correctly in order to pass to the next steps).
Step2 – Check Firmware Version
Press the “Info-Button” on the CP1025nw LaserJet for five seconds.
The printer will print two info pages.
Look at the first Page on the top-left for Firmware Version
Firmware version must be 20120103 or higher.
Step 3 – Update Firmware
Download Firmware Update utility (LJCP1020_FWUpdate_signed.exe) from the following link:
Utilidad de actualización del firmware de HP LaserJet CP1025nw
or
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-5&cc=es&dlc=es&lc=es&...=
Execute the Utility on the computer were the CP1025nw LaserJet is correctly installed.
Find the CP1025nw Printer on the list. The selection Window might show the printer several times depending on how the printer was installed. Select one option and press the button “Update One”.
Step 4 – Retrieve the Printer Code for your CP1025nw Printer
ATTENTION:
The “Host Name” of the printer is not the “Printer-Code” you need for ePrint setup.
To retrieve the Printer-Code you must run the ePrint-Setup-Wizard-Utility.
To download of the utility, go to the link: http://www.hp.com/go/ePrint .
Find the “HP LaserJet Pro CP1020 Color Printer Series” option in the Drop-Down-List.
Click “Windows” to download the wizard (EPrintSetupWizard.exe ).
Execute the Wizard on the computer where the CP1025nw Printer is correctly installed. After running the wizard press the “Info-Button” on the CP1025nw LaserJet for five seconds. The printer will print three info pages. The third info-page offers the Printer-Code you need for ePrint setup. The code is valid for 24h only. When time elapses you have to reprint the info-pages to get an actualized Printer-Code.
Step 5 – Get Printer Email for your CP1025nw LaserJet
In order ePrint on your CP1025nw Printer you need to assign an email address to your Printer. To do this, go to the following link: http://www.hpeprintcenter.com/
Log in with your HP-ID. If you don’t have one, register for a new account.
When logged in, click on “Add new Printer”-button. You will be asked to enter the Printer-Code. (On how to get the Printer-Code, see step 4).
While evaluating the Printer-Code, be patient, the program needs its time.
When the Printer-Code is accepted, you can assign an email address for your CP102nw5 LaserJet. Done this, your con print your CP1025nw Printer just by sending the documents per email to the email-address of your printer.
Done.Hi Max, check out the link below...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4052972
Hope this helps
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP -
Can I make my HP laserjet m1522nf mfp printing wirelessly?
I have this non-wireless hp laserjet m1522nf mfp printer at home. I have two laptops and am using FiOS wireless router for wireless internet access. I also have a Rosewill wireless router. It is not a printer server, just a regular wireless router. Now I use an enthernet cable connecting printer to Rosewill wireless router. Can I print from my laptops? If yes, how can I set it up?
I know I can either buy a wireless printer server, or a wireless adaptor or use one of the laptop as printer server to make this work. But I want to try laptop + Rosewill wireless router + HP printer route.
Thanks in advance,
-J. Z.Hi,
Based on its specs, it has:
Connectivity, standard
10/100Base-T Ethernet network port, Hi-Speed USB 2.0 compatible port.
Connectivity, optional
None
You may be able to connect it to a wireless rounter and config it on the same wireless network then you can print wirelessly.
Please use the following book (page #13) to set it up.
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
HP Color laserJet CM1015 MFP printing problem
Till now my HP Color laserJet CM1015 MFP printer was working perfectly and suddenly prints miss aligned colors. Each color prints a little bit below another. I uninstalled printer’s software and reinstalled again but it didn’t help. There is no error messages. Printer’s alignment didn’t help either. Can anyone help me with this problem?
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.auYes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au
Maybe you are looking for
-
HP7960 black and white prints half purple
We use the HP7960 mostly to print copies of black and white photographs. The copies start out fine, but change to purple about midway through the page. I have set the color to Grayscale but it doesn't seem to make any difference. It is very import
-
How do i get a boolean indicator to trigger a event structure
I have two parallel loops running, and i need to use a boolean value, one that comes out from an OR gate, to trigger an event in the parallel, event structure loop. I've attached a simplified version of the loop. Is there a way to get this done? I
-
After downloading yosemite, can't import photos from camera to iPhoto
After downloading Yosemite 10.10.1 to my Macbook Air, I can't import photos from camera to iPhoto. Had no problem before. It recognizes camera and says loading, but it never does load photos.
-
How can I monitor the voltage output sent to each servo axis programmatically?
Hi I am wondering if it is possible to monitor the voltage that's being sent to a servo motor during an axis position movement (in particular quantities such as max voltage). I am using a PID controller to drive this servo motor. Thanks Vlad
-
Macpro goes to sleep without warning and I have to reboot to get it back
my macbook pro goes to sleep without warning on batt and I have to rebootto get it back