Hp LaserJet CM1415fnw major driver problem

hello everyone,
I have a HP laserjet CM1415fnv that has a major driver issue under Windows 8.1 64-bit. The printer just stopped working and I found that I could not even remove the printer from Devices and printers without causing an issue. Ifg I try to remove the printer from D&P the Print spooler service crashes and I have this event in my event log:
If I try to go into the printer properties for the printer explorer crashes and I get this event in my event log:
If I am able to make the printer disappear from D&P and I try to reinstall the printer software I'm greeted with this:
What the heck is going on here?

Hi @ratman396,
I see that you are having issues with the printer software using Windows 8.1. I will try my best to help you out.
Did you download the latest drivers for Windows 8.1? HP LaserJet Pro CM1415fnw Color Multifunction Printer Drivers.
Restart the Print Spooler and clear out the spool folder:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type Services.msc .
Double-click Printer Spooler in the Services list.
Click on the Stop button and click OK.
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type"%WINDIR%\system32\spool\printers, then delete all files in this folder.
Go back to services by holding down the Windows Logo key () on the keyboard and the 'R' to open the run box, type Services.msc again.
Double-click Printer Spooler in the Services list.
Click on the Start button. In the Start up Type list, make sure that Automatic is selected and click OK.
Run the uninstall from the CD, just to remove any software that did install.
Temporarily turn off any Antivirus Software to make sure there is no interference.
Then run the software again, follow this document immediately after connecting the USB cable, to update the drivers before the software errors out again. A Fatal Error Displays During Software Installation.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

Windows 7 - HP Laserjet 8500 print driver problem

I have tried everything imaginable to correct this HP 8500n print driver problem with no success, please help!
I cannot correct or get rid of a reoccurring “Incompatible Print Settings” error dialog box message that repeatedly states that “There are one or more conflicting settings. One of the settings is: Output Bin: Mailbox 1, Accessory Output Bin: Not Installed”. The radio button options are “Restore my previous settings or Keep this setting, and I will change it later”. This same dialog message repeats 13 times for all the other various conflicts each time you click on printer properties to change to 2 sided printing or any other printer settings. This printer does not have any of these features attached or set into it.
I am a volunteer that manages a number of computers on our small church LAN, 2 computers operating on MS XP-SP3, 2 on MS Windows 7 Home Premium and my 2 problem computers that came pre-installed with Vista Home Premium of which I have performed an HP OEM upgrade to Window 7.
I have isolated this print driver problem to the Vista operating system and even when computers are upgraded to Windows 7 does not correct this driver error. I have also tried every possible print driver variant of the HP 8500, HP8550, PCL, PS to include the Microsoft versus HP versions with no success. In each case I get this error yet neither of the XP computers or the computers that had Windows 7 as a original operating system have no problems with their print drivers for this printer.
Yes, I have repeatedly searched and upgraded the operating system and print drivers. In desperation I have even tried to find the correctly behaving Windows 7 print driver and transfer it to these Vista upgraded to Windows 7 machines. However I could not isolate the driver location.
The only thing I can conclude is that this errant HP print driver was resident within Vista and remains resident even after a HP OEM Windows 7 upgrade. Additionally, all of these computers are configured to access this printer via its static IP address on the network. The XP computers are 32 bit, all of the Vista upgraded to Win 7 and OEM Win 7 computers are 64 bit machines all with respective OS.
Can anyone please help me correct this problem?

Hi,
Unfortunately I can't see your uploaded image yet as it is awaiting approval from HP.
From what I can see you are correct that HP does supply drivers for this printer and that the drivers for your printer are already included with Windows 7. On the machines affected, try the procedure below to see if it helps at all
Next download revo uninstaller on the link below and install it.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect the printer from the PC.
Run Revo and see if it finds any HP Printer Software installed. If it does, right click the software icon and select uninstall. During the process you may be asked to delete registry entries. If you are, just select all and click delete. Do the same for any left over files and folders. Once completed, reboot the PC.
Re-connect your printer to the PC and follow the guide below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
If this helps you will need to repeat the process on each of the affected machines.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP LaserJet 2605dn latest driver problem/bug

Hi
I just downloaded and installed the latest driver for this machine, upd-pcl6-x64-5.7.0.16448.exe released a few weeks ago. I found a problem and hope someone can verify and fix it later. That is, when I change the "Paper type:" to something other than "Unspecificed", I cannot print double-sided anymore. The step is really easy to reproduce, please let me know if I miss anything.
Thanks
David

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Laserjet CM2320 MFP driver problem with Outlook 2013

Hi,
The problem starts when you want to print from Outlook 2013 ( Office365 flavour ).
You can print once. Then Outlook and the printspooler crashes.
In the print qu you find pages NA and no kb for the printvolume.
Impossible to delete the printjob normaly.
Only reboot helps to recover printing possibilitys with the exception of Outlook 2013.
After consulting HP, we tried to prin with PCL 6 an Post Script drivers with changed, advanced, settings.
This does not help.
More then one PC faces this problem.
Do you have an idea to fix this ?
Best regards
Paul

Hi Paul,
It might be that the 'OutlPrnt' is corrupted on your computer. This is the file where Outlook keeps its printing style settings.
Please try to recover from this by renaming the OutlPrnt file to .old when Outlook is closed and verify the results. You can find the file in %Appdata%/microsoft/outlook.
Thanks,
Ethan Hua CHN
TechNet Community Support

Help - major drive problem!!

Hi-
The Drive in my PPC G5 has been making some funny noises recently and even getting a CD to appear on the desktop took ages. So I decided to replace it. I asked what would make a good replacement and someone suggested a Pioneer DVR-216.
However, now it has arrived I can see that it is much smaller than the drive I took out, it has no power input and the existing ribbon cable doesn’t fit! So I’ve got a totally useless drive here.
Which drive DO I need? The one that came out seems to be an Hitachi GWA-4082B (if that helps!)

Hi Andrew
Your dvd drive is the sound you first get when you put a dvd in your drive . The sound you are hearing a funny clicking sound . If so Mine is doing the same thing as well . But I am still able to use my drive . You may want to replace in the future time . There not very expensive cost to replace , unlike other parts fro the mac computer that will demand a arm and leg cost .
You are right about one thing the drive will take along time to mount the cd on the desktop but not all the times . It maybe ok for a while if you de side to replace it . I have the replacement drive listed on the owc.com website in my g4 computer. I may exchange it with my better drive to my G5 .I dont do much burning on my G4 computer anyway .

HP Color LaserJet 5550 and Tiger (10.4.11) Driver Problem

I have recently acquired a Color LaserJet 5550hdn. I have updated all drivers and firmware available from the HP Website (Printer Driver, 5550 firmware and Jetdirect 610n firmware). The printer has been factory reset/cold reset etc. to purge any previous custom settings. I am using a PowerMac G4 Quicksilver (933mhz) and Mac OS X Tiger (10.4.11). I have made some test prints from both Preview and iPhoto and all have been dark and muddy with respect to colors. I have printed the same images from my wife's PC with HP's PCL 6 Driver for Windows XP and achieve satisfactory results with respect to color (that is to say, without fooling with any color settings in the driver, the image is at least within 10% of the color gamut compared to the screen image). Setting up the printer with the HP Postscript Driver for XP yields similar results as the Mac, dark and muddy colors. So is this a problem with the HP Postscript Driver? Is this a Mac OS X Tiger problem? Do users have color problems with the printer running the Leopard driver?
I previously owned a HP Color LaserJet 8550 (utilizing the same HP Driver for Mac OS X that the 5550 uses) and had default images (no fooling with any color settings in the driver) that were acceptable, again within 10% or less of the screen image color gamut.
I have also downloaded HP's ICC color profiles (CMYK and sRGB) and put them in library/printers/hp/profiles.
With respect to the driver itself, there are two areas in the print dialogue box which seem to have a bearing on color. One is Colorsync and the other is Color Options. Colorsync has two choices ('Standard' and 'In Printer') and I chose 'In Printer' to I assume bypass any Colorsync Conversion. When 'Standard' is chosen the print summary shows the HP Color LaserJet CMYK profile being used. There seems to be no way of changing the default setting in the Colorsync Utility to HP Color LaserJet sRGB. Not sure if it matters as the output for both 'Standard' and 'In Printer' seem to yield the same results. The options under 'Color Options" in the driver under the 'Show Advanced Options' have choices (Basic, Text, Graphics, Photographs, Advanced) and I have played with these to some extent. Although they seem to have some effect on the image, the print is still dark and muddy with respect to colors.
On a final note I have tried a 'GutenPrint' driver to see if it would yield different results.....there was not one for the 5550 so I used a driver for the Color LaserJet 5500......it would only print in grayscale....the resulting image did not look very promising even if it had printed in color.
Insights on any of the above from the community here would be most helpful!
Thanks,
-Ray

This is an update to my own post above. I downloaded the Mac OS 9 driver (yes OS 9!, but the QuickSilver is Dual Boot) for the Color LaerJet 5550 and printed (no changes to any of the driver settings) the same image (photo) as I used in Mac OS X. The image was still dark but not as poor from Mac OS X 10.4.11 (Tiger). Although I prefer not to use color management, I used the Colorsync tab in the driver and chose to match to Colorsync with a generic sRGB output profile (no other settings were changed in the HP color options tab). The resulting image was +/- 5% within the color gamut of the screen image (yeah!!!) In Tiger the options under the Colorsync tab in the driver are 'Standard' or 'In Device' and regardless of the choice, the print result is the same, very dark and muted colors. There is no option for sRGB and if set to 'Standard' the print summary always shows a CMYK profile being utilized. Given that the HP Color LaserJet 5550 is an sRGB printer as per HP, perhaps that is a problem? I would assume the 'In Device' option would bypass Colorsync (since there seems to be no other way to turn it off) and use sRGB, but that does not seem to make a difference in the image being printed.
My good success with an OS 9 driver leads me to believe I have a driver problem in Tiger. However, I have no problems with other printers (HP All in One, DesignJet Color Plotter and wide format Epson inkjet....all of which are older) with respect to poor color output. Given this is a current model in the HP line-up and I believe in service during Mac OS X Tiger, it seems hard to fathom other users do/did not experience a problem.
Again, do Leopard users have a problem with color issues on this printer with default driver settings? Does anyone have driver settings/other insights they could share with respect to Tiger to at least get the print image somewaht close to the screen image? As it stands now, regardless of settings, the printed image is dark with muted colors.
Thnaks to anyone who can respond, even if it is to say they have no problems in Leopard/Snow Leopard as I am upgrading to a new Mac soon.
-Ray

Hp laserjet 1018 with windows 7-32 driver problems

We've used this printer with our new computers for 2 yrs now. The last 4 months, we've had issues with it not printing all of the time, but. Could turn it off and back on and it would work. Now it's not printing at all. I have downloaded driver and utility, it works to print 2 things and then quits again. If I reinstall the driver again, same thing, prints 2, then quits. I have replaced the cable, tried everything. This is my main printer at my front desk (billing, patient receipts, etc), I need thirinter up and running ASAP! Having to reinstall the driver every 15 minutes is not going to work for me!

Hi,
Please delete the LaserJet 1018 printer driver from device & printers. Then click on 'print server properties' -> driver tab and delete 1018 driver (if listed).
then from server properties, go to 'port' tab-> delete printer IP port (in case of network printer)
download basic host based driver from following URL:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-58503-3&cc=us&dlc=en&lc=en&...
and complete the driver installation.
ExpertOne
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

HP LaserJet CM1415fnw

Every time I download the drive for the HP LaserJet CM1415fnw printer it says the file is corrupt. Without having the driver I am unable to print. Any help would be greatly appreciated.
Thanks,
Paul
This question was solved.
View Solution.

Download what you need to a thumb drive on another computer. Now take it this computer and install.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

My HP LaserJet CM1415fnw Printer keeps rebooting when connected to my ethernet router.

I bought my HP Laserjet CM1415fnw Color printer in 2013 (don't remember the exact date). The CM1415fnw printer is plugged into its own AC power outlet and has been connected to a NETGEAR Nighthawk router for the past 2 years. My network and computers have not changed in the past 3 years. About a month ago, July of 2015, the printer started rebooter itself about every few minutes. These are the things that I have tried: 1. I turned off the printer for several minutes via the power off switch located on the side of the printer. This failed to solve my reboot issue.2. I turned off the printer for over night via the power off switch located on the side of the printer. This failed to solve my reboot issue.3. I unplugged the printer from the AC power outlet for several minutes and over night. printer. This failed to solve my reboot issue.4. I turned off the printer setting "WS-Discovery" with no success. It continued to reboot.5. I turned off the printer and Unplugged the ethernet cable and phone line cable from the printer. I then turned it on. Itstayed on for hours without rebooting. I plugged the ethernet cable and it continued to stay on without rebooting for over an hour. I then plugged in the phone line cable and within a minute the printer starting rebooting again. I unplugged the phone line cable again and the printer stopped rebooting. My wife and I have been printing happily. Problem solve! NO! This past week, on July 27 2015, the printer started rebooting again. I went through the same steps above except this time whenever plugging in the ethernet cable, within and few minutes the printer would start its rebooting. Sometime between reboots it would stay up long enough to print a job. Other things that I have tried: 1. I connected the printer directly to my workstation computer via the USB port and plugged in the phone line cable. This work great for hours. I could print jobs. No rebooting. It is just not the solution the I need. I need a network printer.2. I connected the printer directly to my laptop ethernet port with phone cable connected. This worked also. So while in this configuration I took the opportunity to upgrade the Firmware from date 20120216 to 20140616. 3. I reconnected the printer to my network router and the printer started rebooting again within a few minutes. I did notice that in between reboots, with the phone line cable plugged in, anytime a phone call came in the printer immediately rebooted. I have mulitple home devices that rely on network connectivity to this printer. SO, right now this printer is offline toeveryone. I need to get this problem resolved ASAP. I have a temporary work around item #6. But, I need a real solution. Can someone please help. My Configuration: HP LaserJet CM1415fnwFormatter Number: QD51YOP
Serial Number: CNH8C9KRHB
Service ID: 21334
FIrmware Datecode: 20140616
Telcom Version: 04-015-001
Controller NUmber: 4

I wish to thank you davidzuts and muj851 for your quick response and help in this issue. I will give you the short story of my troubleshooting efforts and solution. I was able to isolate the printer reboot to my wife's computer located in another part of the house. Anytime that I connected her computer the the network the printer would start rebooting within a minute. I then uninstalled all HP printer software. I then reconnected her computer to the network. Within a minute the printer went into reboot mode. After a few install and uninstall of the HP printer soffware and drivers I took notice that the printer device for my printer still appeared after uninstalling the software and drivers. I clicked on the printer device and manually removed it. After rebooting the computer within a few minutes there was a system message stating that the device driver was being install. Reinstalling the Printer software and drivers create a new instance of the CM1415FNW Printer. Uninstalling removed all but the orignal printer device. Connected the network caused the printer to reboot. So, looked at the printer queue and found that there was a document in the queue waiting to be printed. The status of the printer showed that the document was ready for print but then the printer would reboot and the status would appear as ERROR Printing. I cancelled the print job and the document in the queue was removed. I then removed the Printer Device. When I connected my wife's computer to the network the printer did not reboot. I have reinstatlled HP Printer software for the CM1415FNW printer and everything has been working fine for the past two days. A conversation with my wife uncovered that the day all of the issues with the printer started she attempted to print a Barnes and Nobles discount coupon. Something with the printer formating codes or the B&N coupon was causing the printer to reboot. The next time this happens I will know to check the print queue.

My HP LaserJet CM1415fnw won't scan from my Windows 8 computer

My hp LaserJet CM1415fnw won't scan from my computer using the paint application on my computer. I had no problem with previous computer. But I purchased a new computer with Windows 8 and the can option in Paint cannot be selected.

Hi HelenBay,
Welcome to the HP Forums!
I see that your HP LaserJet CM1415fnw will not scan from your Windows 8 computer, and I am happy to help you with this scanning issue!
For further assistance, I will need to know:
If the printer is connected, Wireless, Ethernet, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try the HP Print and Scan Doctor, and let me know what happens!
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Restoring iTunes files after hard drive problems

HI.
I recently had hard drive problems and since the recovery of the data I have lost all my files from iTunes. The sogs I have put on to the Mac via CD's are all still there but all the iTunes downloads have disapeared. This is probably because I didn't back up!
I also have numerous duplications, which I eventually removed from itunes but I know the majority of which will return if I drag my music folder across.
This will be a hige taks again to remove the duplications.
I want to use this unfortunate incident to my advantage though and now have a clear out of my unwanted files and keep my iTunes nicely organised.
I also lost my playlists, which is a major pain.
By looking at the support threads it seems that I can use my ipod to put my library back as it should be. Will this also replace my downloaded songs? My other issue is that some of my iTunes downloads, downloaded with some problems, which are obviously on my ipod. How do I go about getting the songs repaired?
Thanks for any help.

[Zevoneer's detailed instructions on getting music off an iPod|http://discussions.apple.com/message.jspa?messageID=9053179#9053179]
[Wired's How To: Get Your Music Off of Your iPod|http://howto.wired.com/wiki/GetYour_Music_Off_of_YouriPod]
[http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-windo ws-mac-os-x>
I imagine if the files exist on the ipod you can get them transferred over. if they don't exist, they are gone.
As for the corrupt files you would need to provide more information on the issues.

I need hp laserjet 1000 series driver for win 8 64 bit

i need hp laserjet 1000 series driver for win 8 64 bit
[Personal Information Removed]

Hi,
The printer is not supported on Windows 8 or Windows 8.1, a drevice is not available for the OS:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03450061
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Yosemite won't install due to a "S.M.A.R.T. drive problem that can't be repaired."

After downloading Yosemite successfully, it won't install due to a "S.M.A.R.T. drive problem that can't be repaired." It says to back up as much as possible and replace the drive. Everything works flawlessly with Mavericks. What gives??

If you are getting a S.M.A.R.T. error then you should be more worried about losing everything on your drive then about upgrading your Mac OS. Regardless of if you are running Mac OS, Linux, or Windows, you should never just disregard such a drive error. S.M.A.R.T. is designed to give you a warning that your drive is statistically having far more errors than normal and should be backed up immediately and typically replaced.
In your case, it's likely a coincidence that your drive is failing at the time you are attempting to upgrade to Yosemite. You should stop what you are doing, backup your drive (if you don't already have the backups that you should prior to any OS upgrade), and replace the hard drive prior to moving forward.
To make it clear, your hard drive is likely going to fail soon and you may lose everything on it at any moment. This failure has nothing to do with Yosemite or any Mac OS. All hard drives fail at some point. Hopefully this S.M.A.R.T. notice has given you the opportunity to solve a major problem before it gets worse.

Major system problems, hanging up at startup.

I'm developing some major sytem problems with my G4 Mac. It all seemed to start with a jumping cursor and then a dying mouse. I could not get the Mac to startup with several trys. It wouldn't even start up off of my external drive. I would get the first four icons in the upper right hand corner of the screen and the it would hang. I tried all of the usual fixes- permissions, disk utiliy, Disk Warrior, zapping pram. I finally started unplugging external items and getting back to original Mac- switching the firewire port in the back of my Lacie external drive helped for awhile, but now I'm getting the jumping cursor again and fearing I'll get a hangup again. Any ideas on how I can solve this problem? If not, can you point me somewhere for instructions on how to reinstall the system software? I have already installed a clean system on my external drive. Once I reinstall all of my apps there, and get it running properly, can I move all of that to my internal HD somehow? My original system disks for this computer is Jaguar 10.2 if that helps.
Thanks for your help,
Dick Skover

Dick,
Some observations and notes.
Have you tried using a different mouse, or changing
the port it is plugged into?
Yes, I tried and am using a inexpensive Logitech optical mouse. The one that came with the computer seemed to get very eratic and then not work at all. I did try plugging into different ports and that didn't make a difference.
How did you upgrade from Jaguar 10.2.x to
Panther 10.3.9?
I upgraded the simplest way, I guess. I had read about more complex ways to do it at the time Panther came out, but also heard you could do a simple upgrade. I don't remember the exact steps I used. Boy, this is way more complex than my original Mac in 1984.
What size is your Hard Drive, and how much space is
available? I should say I have quite a few applications.
My HD is 75 Gig with 17 Gig available.
Is your installed RAM original or added?
Yes, it came installed when I purchased it: 1.5 Gig
In one post you wrote "My original system disks
for this computer is Jaguar 10.2..."
I heard something back when Panther came out that the fact I started with 10.2, didn't allow me to do certain things like archive and backup.
But in another, you wrote "Yes, my original
Panther disk and then updated everything via
Internet."
Please clarify.
When I decided to install a clean system on my external HD I just used my Panther 10.3 disk- I didn't go all the way back to 10.2
"Yes, Disk Warrior found some problems, I don't
know exactly what they were."
Were the errors corrected? Have you rerun Disk
Warrior, to see if they are indeed repaired?
Actually I ran DW today again on the internal HD and it came up with a couple of problems that it said it repaired. Should I keep running it until it doesn't indicate any problems?
A couple other things you can check.
Open System Preferences > Accounts > Your Account >
Startup Items.
Is there any item in there that you are not familiar
with, or did not put there yourself?
Yes I did try that- I had a repair person come in to help me. He did point that out and we deleted items that didn't need to be there. What he suggested did help for a week, but the problem came back. I called him again, but he said the only thing left to do was re-install.
From the Utilities folder, start Activity
Monitor.
Select Active Processes.
Watch for whatever process is hogging %CPU.
Yes he ran activity monitor also- there didn't seem to be programs hogging the processor although we deleted those that look familiar.
I also have a question about the title screems that pop up on start up. In the past I used to have several things being checked as it went through the process, now I get welcome to Macintosh and that's it. I seem to remember indications that Macaroni was running, but no longer see any of that. I do have Macjanitor also and thought that one of those automatically runs at startup?
I will run pseudo daily, weekly and monthly tasks now. Is this something that Macjanitor does, or should I run the maintenance scripts periodicaly?
ali b

Can I just close disk utility without risking data loss or drive problems?

I am using disk utility's restore to clone a hard drive to an external drive but it is taking forever (telling me 3 days) and the cancel button won't work. Can I just close disk utility without risking data loss or drive problems? Force quit? Anyone have experience with this?
- George

I spoke with a tech advisor through applecare. Theoretically the source drive should not be damaged if you quit the disk utility application while cloning your drive. More obviously, the destination volume will be unreadable and require a re-format, but in general no major damage will occur. I have quit the disk utility and restrarted, the source drive works as expected, while the desitination shows, "unreadable"
Hope this helps anyone else with a similar question.
- George

Hp LaserJet CM1415fnw major driver problem

Similar Messages

Maybe you are looking for