HP Laserjet color Pro 200 mfp m276nw

How can I remove the security code??? guy that installed it is gone. NEED TO REMOVE SECURITY CODE.

Hi @JoePaluka , I can help you today, to remove the security code on the printer.
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

Issue Printing One or Two Checks on HP LaserJet Pro 200 MFP M276nw

I just purchased an HP LaserJet Pro 200 MFP M276nw which replaces an HP Color LaserJet 2605dn.
I've run into an issue printing checkes from Quicken when I print less than a full sheet (one or two) checks.
With my old printer, I used the manual feed for a partial sheet.
Since the new printer does not have a manual feed, I have to put the partial sheet in the paper tray.
It seems one of two things happen:
1) Sometimes the printer will print the partial page but then displays an error message which says something like "Unexpected paper size, load letter."
It then re-prints the partial page on the next sheet of paper.
2) Othertimes, it prints the partial page without the error message, but then feeds the next sheet of paper throught the printer.
In either case the next page contains the next three checks, so it's either wasting checks or printing on the wrong check numbers.
Any suggestions on how to avoid these issues would be appreciated.

Me too.
I've been using an alternate printer for printing the checks, but I'd rather get rid of the old one. (The HP Laser Pro 200 takes up a lot of space!)
KC, Seems like you've been waiting for an answer for a VERY long time. I'm not going to hold my breath.
Hey HP! Do you ever monitor this site?!
KC-Texas wrote:
I just purchased an HP LaserJet Pro 200 MFP M276nw which replaces an HP Color LaserJet 2605dn.
I've run into an issue printing checkes from Quicken when I print less than a full sheet (one or two) checks.
With my old printer, I used the manual feed for a partial sheet.
Since the new printer does not have a manual feed, I have to put the partial sheet in the paper tray.
It seems one of two things happen:
1) Sometimes the printer will print the partial page but then displays an error message which says something like "Unexpected paper size, load letter."
It then re-prints the partial page on the next sheet of paper.
2) Othertimes, it prints the partial page without the error message, but then feeds the next sheet of paper throught the printer.
In either case the next page contains the next three checks, so it's either wasting checks or printing on the wrong check numbers.
Any suggestions on how to avoid these issues would be appreciated.

Network protocols supported by HP LaserJet Pro 200 MFP M276nw

Hello,
I am about to buy the HP LaserJet Pro 200 MFP M276nw however I cannot find in its manual what network filesystems/protocols it supports for scanning to network folder.
I need it to be able to scan to a NFS share preferably or to a samba share.
Can anyone confirm this printer is able to do this?
Regards.

Here is a link that will help get you the manual for this printer.
http://goo.gl/CR3tl
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

HP LASERJET PRO 200 MFP M276NW - Can't scan to Network Folder

Hi there,
The scan to email works but not the scan to Network Folder. I have tried a lot of things but I give up.
I have given permissions to all and after share a folder it appears as shared... but does not work.
The OS is Windows 7. Hope you can help me with this because I will use a lot the scan to shared folder option.
Thanks in advance,
Fran

Hi skile88,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are unable to setup the scan to network.
I will be happy to help you.
It is usually a issue with the Network Path for the network folder created.
Create a folder anywhere on the computer.
Right click the folder and left click properties, select the Sharing tab, click the Share button, select who you want to share the folder with or everyone. On the same Sharing tab copy the Network Path. (example \\envy1730\users \Envy\desktop\networkfolder
In the embedded web server for the printer go to the Scan tab, select network folder setup, paste in the path for the network folder. Go through the wizard.
If those steps don't work then follow steps 1, 2, 3, to resolve this issue to try and get the network folder and path.
Step one: Make sure that the computer user account is password protected.
1.Click the Windows icon, then click Control Panel.
2.Click User Accounts, then select the account you used to log into the computer.
3.Click Change your Windows password, then find the user account you used to log into the computer.
•If the user account is password protected, continue to the next step.
•If the user account is not password protected, click Create a password for your account to create a password, and then continue to the next step.
Step two: Define the network location
1.Click the Windows icon, then click Control Panel.
2.Click Network and Sharing Center.
3.In the View your active networks section, click Public network under your network name. The Set Network Location window opens.
4.Select Home Network or Work Network, then click Close.
Step three: Make sure that the network sharing and discovery options are correct
1.Open the Network and Sharing Center window.
2.Click Choose homegroup and sharing options.
3.In the Share libraries and printers section, select Documents.
4.In the Other homegroup actions section, click Change advanced sharing settings.
5.In the Advanced sharing settings window, make sure that the following network options are turned on:
•Network discovery
•File sharing
•Public folder sharing (read and write access)
•Password protected sharing
6.Click Save changes.
7.Your computer network is now successfully set to complete the Scan and Fax to Network. Folder or Digital Fax to Network Folder Wizard.
I believe that this will provide a resolution to your issue. Thank you.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet Pro 200 MFP M276nw

Have had this printer less than four weeks, had been printing fine. Now the ink comes out in globs all over the paper with no writing. After it drys, you can literally peel off the flakes of printing material. I paid too much money for this product to have this kind of problem. And trying to find an actual phone number to speak to an actual person at HP is impossible. I do not have time for this. Anyone have a solution?

The document here may help. If you are in the US you can call HP at 1-800-HPINVENt, elsewhere see the document here for contact information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

59.9 error for Laserjet pro 200 MFP M276nw

The 59.9 error occour on my printer. Already follow the instruction to reset and fixed the problem. Still the error occour.
Please help me to fix the problem.

1. Turn the printer off, and then turn the printer on.
2. Check and reseat the fuser and toner cartridge to make sure they are not hindering gear movement in the drive train.
3. Check the main motor’s cable to ensure that it is seated properly.
4. Replace the main motor.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Keith Gilabert, "Mac does not connect wirelessly to my HP Laserjet Pro 200 MFP"

My Mac was connected by USB but I want to use wireless. I have 3 other devices connected to my printer. Is there a limit to how many wireless devices can be connected to my Laserjet Pro 200 MFP printer at one time?
Thanks,
Keith Gilabert
Keith Gilabert
This question was solved.
View Solution.

Thank you!
Keith Gilabert

HP Laserjet Pro 400 color M451dw vs HP laserjet Color Pro MFP M277dw

Dear,
Could you tell me what the main difference is between to printers. At this moment I use the Laserjet Pro 400 M451dw but I am very interested in the new Laserjet Color Pro MFP M277dw because you have the copy/scan utlility on this printer. Kind regards.

@ammarch
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Keith Gilabert "HP Laserjet Pro 200 MFP will not connect wirelessly"

Hi.
Laserjet HP Pro 200 will not allow me to have a wireless connection direct to the printer when I have the network cable plugged in.
Please advise.
Thank you,
Keith Gilabert
Keith Gilabert

Hello @KeithGilabert
You may only use the network cable (Ethernet) or Wireless as the connection to your computer(s). Both of the connections together cannot co-exist, unlike USB and Wireless, which is possible.
Installing the Printer Software on a Wireless or Wired (Ethernet) Network
Wishing you a wonderful Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP PRO 200 MFP 276NW WIRELESS PRINT DIRECT PROBLEM

I JUST BOUGHT AN HP LASERJET PRO 200 MFP 276NW COLOUR PRINTER AND I DISCOVERED THAT I CANT PRINT DIRECTLY FROM MY LAPTOP. MY LAPTOP HAS A WIRELESS FUNCTION . HOWEVER I WAS ABLE TO PRINT FROM MY SONY XPERIA ZR PHONE. I HAVE TRIED TO REINSTALL IT ON MY LAPTOP SEVERAL TIMES BUT WITHOUT SUCCESS. IT ALWAYS SHOW ISSUE SYMBOL ON TNE COMPUTER WIRELESS CONNECTION PANE.
SECONDLY, THE PRINTER USUALLY MAKE NOISE WHEN PRINTING. IS THIS NORMAL?
FINALLY. IS THERE ANY HP DESIGNATED SOFTWARE FOR PHONES TO CONNECT WIRELESSLY TO HP RINTERS TO PERFORM NORMAL PRINTING JOBS?
I ACTUALLY BOUGHT THIS PRINTER BECAUSE OF THE WIRELESS FUNCTION. AM USING WINDOW 7 OS.
I NEED HELP URGENTLY
THANKS
This question was solved.
View Solution.

Hello @OLAAT ,
Welcome to the HP Support Forums!
I understand you are having some issues printing over the wireless network to your LaserJet 200 MFP M276. It seems to me, since the printer will print from your Sony Xperia ZR, and the error icon is on the computer, you need to look into computer support for that question.
I was able to find a document that may help with the wireless connection issues on the computer. Troubleshooting Your Wireless Network and Internet Connection (Windows 7)<---
If the above doesn't help, I would suggest posting the inquiry in the laptop Forum's.
Regarding printing from phones and what software is needed, it is dependant of the phone. Some phones, like Apple, have AirPrint pre-installed. You would be able to install and try the HP ePrint App on your phone, if available in its App store.
This guide: Getting Started with HP ePrint Mobile Apps, will explain more about the App.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Laserjet Pro 200 ColorMFP m276nw stopped printing

I installed my HP Laserjet Pro 200 Color MFP m276nw printer a couple of months ago and set it up for network printing. It has been working perfectly for everyone in my house until now. Everytime I try to print, nothing happens. Others in my household who are on the network can print. When I go to the Print Queue dialogue box, I get the message: "Printing--the printer is not responding." If I go into the Printers and Faxes application in System Preferences, it shows this printer as Idle. I have tried restarting my laptop (Macbook Air), turned the printer off and on, turned Wi-fi off and on, turned Bluetooth off and on, even tried connecting to the printer via cable. What else can I do?
This question was solved.
View Solution.

Hi Robvale,
Welcome to the HP Forums!
From what you have described it sounds as though the print job are not leaving the print queue. I have included the document 'Can't Print? Print Jobs are Stuck in the Print Queue'. Please select you version of Mac, and follow through the steps listed.
If you are still having issues after this, please provide me with the version of Mac OS X you are running. I have included the document 'Finding your OS X version and build information', if you need it.
Looking forward to hearing from you.
I worked on behalf of HP

HP 200 MFP M276nw not seen in the network after changing router

Printer: LaserJet Pro 200 color MFP M276nw
LAN: two PC's (Windows 7) and the printer wired to the router. Other devices connect wireless. Internet service is cable.
I installed this printer when a Linksys E2500 router was in use. The network configuration after installation of the printer was:
IPv4 address: 192.168.1.120
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
IP Configured By: DHCP
I replaced the Linksys router with a Netgear WNDR4500 (N900) router one month ago. Everything worked fine for about two weeks. Suddenly, the jobs sent to the printer started to take a very long time to begin printing, until they stopped printing altogether. The printer did not appear as an attached (wired) device in the router's Web-based interface. Not even the HP printer software or the HP Print and Scan Doctor could find a printer attached.
I unisntalled and reinstalled the printer, but was not successful until I changed the Ethernet cable connecting the printer to the router. The difference is that the old cable is Cat5e and the replacement a Cat6 ??? It is printing and scanning now but the printer is still absent as a wired device, and I am afraid that it will stop working once again.
I noticed that the printer's network configuration after reinstallation is:
IPv4 address: 169.254.230.140
Subnet Mask: 255.255.0.0
Default Gateway: 169.254.230.140
IP Configured By: AUTOIP
Searching the Web, I found an article saying that AUTOIP might be a sign of router or cable problems. My suspicion is that the printer's IP address is changing constantly and that's the reason for the printing delay.
My questions to the experts are: could I assign a manual IP address to the printer so I can add in the router -it provides for doing so-, and how is this done? In the HP Device Toolbox, under IPv4 Configuration, there is a drop-down menu with different options -DHCP, BOOTP, AUTOIP, and Manual- but I don't know if changes are done here, or if it is a more complex undertaking.
Thank you very much.
Cordially,
Miguel Iturralde
This question was solved.
View Solution.

I fixed the problem the same day I posted the help request.
I shut everything down -including the cable modem and router- but left the printer on. Went to the printer's panel and changed toe IPv4 configuration from AutoIP to Manual. I already had picked an IP address starting with 192, since I've read that IP's starting with 169 are associated with AutoIP settings. From there, the printer presented valid Subnet Mask addresses, I picked one, as well as a Default Gateway address. Then I shut down the printer.
I turned back on the modem, router, pc's, and printer. The router then showed the printer as an attached device with its newly assigned IP address.
I suspected the cable was not a problem here, so I put back the Cat5e Ethernet cable. What baffles me is why the printer changed to AutoIP because it was not done by any user. Checking the reports printed when the printer was first installed, I see that the IP adress method as DHCP. After putting in the new router, changes consisted in SSID name and password in the wireless devices, and a firmware uodate of the router.
This was learning by trial since I am not a computer expert, but so far, we are to print and scan documents.
Thanks to everyone who took the time to read the post and offered help.

Color Laserjet Pro 200 MFP Print Menu

When I use my iMac 27 with this printer, I don't see all the print options in the print menu in Preview etc. that are mentioned in the User Guide. No "Color/Quality" options/Advanced etc. to change. I have downloaded and installed the latest drivers from HP. I am using OS X 10.9.4. Am I doing something incorrectly or missing something. The product is working fine otherwise.
This question was solved.
View Solution.

Hi jerryoster,
It sounds to me from your description that you might be using the Mac AirPrint driver instead of the HP driver. I suggest the follow;
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
hen you add the printer, ensure you are using the HP driver, not the AirPrint driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know if this resolves the issue. If you require further assistance, let me know which LJ 200 model you have (How Do I Find My Model Number or Product Number?), and if you have downloaded and installed the full feature software and driver from the HP website.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP LaserJet Pro 200 MFP Loud noise + grinding

This is my second HP Printer ( exact same one). After using it quite often for over 8 months the printer starts out by printing 2 completely black pages before printing the desired document. This will repeat if the printer sits for more
than 15 minutes. Also when about to print it makes a rough grinding noise and then continues onto grabbing the paper and does it's job. Cartridges are full ( brand new). I even went and purchased another one to see if this is the problem.I print about 100 pages a day and get orders at different time of day so I do not have time to wait and 2 two pages before going on with the thing I wanted to print in the first place.
Also, even though the cartridge shows 80% full the pages print faded images.
I use HP paper for laer printers
Always use original HP cartridges
HeLp!!!

Hi @Dadcia ,
I see that you are having issues with the printer printing 2 black full pages and then it will print properly after that, but makes a grinding noise. I will certainly do my best to help you.
I am assuming you have one of the models with just the black toner. Which one do you have? How Do I Find My Model Number or Product Number?
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
I would run a firmware update on the printer first.
Try printing a hardware self test page after the printer sits for the 15 minutes to see if you have the same results.
Inspect the toner cartridge for damage:
1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
2. Check the memory chip for damage.
3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
Fingerprints on the imaging drum can cause print-quality problems.
4. If you see any scratches, fingerprints, toner or other damage on the imaging drum, replace the toner.
5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
If you still have the other printer, switch the toners to see if you still have the same issue.
Please let me know the results.
I can provide you with more steps, once I know which model you have.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet pro 200 MFP M276

The touch screen does not work.

Hi @morgie ,
I see that you are experiencing issues with the touch screen not working. I can help you with this.
I have provided a document to see if we can resolve this issue.
The Printer Display Is Blank or Black.
Disregard the title.
Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet color Pro 200 mfp m276nw

Similar Messages

Maybe you are looking for