HP LaserJet CP1025nw Color getting a Mispick error message
I have a HP LaserJet CP1025nw Color printer, running on WIN 7 64-bit and I am getting a Mispick error message after almost every page that prints. I have had this printer for the past 1-1/2 years and it has worked fine. I replaced the black toner over a month ago with no issues. The Attention light blinks and has to be rest after each print job. I can print a test page then it errors, I clear it and then it will re-print the test page again. I have cleaned the rollers, check for any loose paper pieces, changed the paper (type and size) nad have powered off & unplugged the power to the printer several times. It will come up with no errors and then once I send something to print, it will print it and then immediately after the page is printed the Attention light will start to blink. I have even gone as far as unintsalling the printer and reinstalling all the drivers and software, to no avail.
Any help would be greatly appreciated.
Thank you,
Jarm1964
This is probably a little late but it may help someone with the same issue in the future. I had the exact same scenario - HP LJ CP1025nw color on Win7-64 and it suddenly started receiving the mispick error after every print job. There was nothing stuck, no paper jam, no problem picking up paper, etc. It turns out it was a setting on the printer - under Printer Properties (from Devices and Printers), on the Configure tab I had checked Allow Manual Duplexing and Jam Recovery set to On. When I unchecked Allow Manual Duplex and turned Jam Recovery to Off, the mispick error went away. Not sure which of the 2 was the culprit.
Similar Messages
-
My HP LaserJet 100 color MFP M175nw is getting a 52 error message
My HP LaserJet 100 color MFP M175nw is getting a 52 error message, how i can fix it ?
Hi @pipou716 ,
I'd like to help you resolve the 52 error message today.
Does the error also have the word scanner in it?
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. Software & Drivers.
Restart the printer after the firmware is updated.
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
How to configure ePrint on LaserJet CP1025nw Color Printer
Solution found:
How to Configure HP ePrint on the LaserJet CP1025nw Color Printer
System: Windows (Widows 7)
Step 1 – Install Printer
Install the CP1025nw Printer to USB, Wifi or Ethernet.
(Printer needs to print correctly in order to pass to the next steps).
Step2 – Check Firmware Version
Press the “Info-Button” on the CP1025nw LaserJet for five seconds.
The printer will print two info pages.
Look at the first Page on the top-left for Firmware Version
Firmware version must be 20120103 or higher.
Step 3 – Update Firmware
Download Firmware Update utility (LJCP1020_FWUpdate_signed.exe) from the following link:
Utilidad de actualización del firmware de HP LaserJet CP1025nw
or
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-5&cc=es&dlc=es&lc=es&...=
Execute the Utility on the computer were the CP1025nw LaserJet is correctly installed.
Find the CP1025nw Printer on the list. The selection Window might show the printer several times depending on how the printer was installed. Select one option and press the button “Update One”.
Step 4 – Retrieve the Printer Code for your CP1025nw Printer
ATTENTION:
The “Host Name” of the printer is not the “Printer-Code” you need for ePrint setup.
To retrieve the Printer-Code you must run the ePrint-Setup-Wizard-Utility.
To download of the utility, go to the link: http://www.hp.com/go/ePrint .
Find the “HP LaserJet Pro CP1020 Color Printer Series” option in the Drop-Down-List.
Click “Windows” to download the wizard (EPrintSetupWizard.exe ).
Execute the Wizard on the computer where the CP1025nw Printer is correctly installed. After running the wizard press the “Info-Button” on the CP1025nw LaserJet for five seconds. The printer will print three info pages. The third info-page offers the Printer-Code you need for ePrint setup. The code is valid for 24h only. When time elapses you have to reprint the info-pages to get an actualized Printer-Code.
Step 5 – Get Printer Email for your CP1025nw LaserJet
In order ePrint on your CP1025nw Printer you need to assign an email address to your Printer. To do this, go to the following link: http://www.hpeprintcenter.com/
Log in with your HP-ID. If you don’t have one, register for a new account.
When logged in, click on “Add new Printer”-button. You will be asked to enter the Printer-Code. (On how to get the Printer-Code, see step 4).
While evaluating the Printer-Code, be patient, the program needs its time.
When the Printer-Code is accepted, you can assign an email address for your CP102nw5 LaserJet. Done this, your con print your CP1025nw Printer just by sending the documents per email to the email-address of your printer.
Done.Hi Max, check out the link below...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4052972
Hope this helps
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP -
Laserjet CP1025nw color, unable to change Print density
Hi,
I need to raise the "Print Density" to 5 (for pcb toner transfer) on my Laserjet
CP1025nw color, but when I open the printer properties I do not have that option
in the device settings tab, despite what is said on the help page of that model.
OS: Windows XP
The printer is on the USB port.
The pilot is: HP LaserJet Professional CP1020 Series + last update
How can I change that setting ?
Please help !!!
Thank you in advance for any help you can bring !
All the best,
This question was solved.
View Solution.From what you describe you want to increase your toner density on your subsequent print jobs. First of all, if you have not, you should uninstall this printer and make sure that the drivers are the most up to date using the website I will link below :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4052972
Here you should also check for your firmware to be sure that it is up to date.
I would also, both before and after, check under "Printer Preferences" (not properties) and see if there is a way to change the density under the Paper/Quality tab.
Let me know if this helps you out!
-Spencer -
I need to connect my wireless printer (HP LaserJet CP1025nw color) to the internet.
I need to connect my wireless printer (HP LaserJet CP1025nw color) to the internet. I recently have changed my name and password of my modem. Since the change I have lost connectivity between my computer and my printer. What do I need to do to regain connectivity? I am using Windows 7.
TrydellI think you mean your password on your router right? Changed your SSID and/or password?
Try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
I'm getting a general error message then out of memory trying to add a new sequence
Anyone know how to fix?? i am getting a general error message and then out of memory when adding a new squence?? Help!
The General Error warning is usually associated with incompatible files.
Out of Memory can be caused by corrupted clips, incompatible files and still images that use a color mode other than RGB. -
I am trying to install Elements, I get this constant error message. This installation is not supported by this processor type. Contact your product vendor.
I am using Windows 8.Hi,
Which version of Photoshop Elements are you trying to install?
Are you installing from DVD or a download?
If DVD, make sure you are using the Windows one, not the MAC one.
What device are you trying to install on?
Does your system meet the required spec?
Are you on Windows 8 or Windows 8.1?
Brian -
I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?
-
I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELPHi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support -
Can someone please help me get my iPhone to sync to your computer?
I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.
Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.
-
Trying to download iOS 7.1 and I get a "Network Error" message. How can I fix this?
Hello. Today iOS 7.1 came out and I want to get it. I currently do not have 2.5GB of free storage on my iPhone 5s so I wanted to use iTunes to download and install iOS 7.1. The problem is that every time I try to download iOS 7.1 I get a "Network Error" message (screenshot provided). The alternative I tried to use is downloading the IPSW file directly from the internet but I also get a network error (screenshot provided). I was able to download anything and everything else I wanted to download today but only get this error when downloading an Apple IPSW file. I downloaded iOS 7.0.6 less than a week ago through iTunes and didn't have an error but with iOS 7.1 I am having many difficulties. I disconnected my internet and tried again but still no success. Does anyone have any suggestions to fix this problem? Any input will help! Thanks so much!
The error through iTunes
The error through Google ChromeTry directly from your device. I had the same problem but it updated when i tried from the device itself.
General > Software Update > Update -
I am trying to sync to Outlook 2010. I get a weird error message when I am trying to setup on my pc. Its not english. It says "der automatische refresh konnte nicht gestartet werden" Help!
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms are appreciated.
Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.
-
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.
Maybe you are looking for
-
This is a very spiratic problem but it seems to occur when I am trying to save something very important. When I type the document, go to file, and click save, a popup comes up. I select the folder and name the file. That popup then disappears. Anothe
-
Windows 2008 R2 Domain Controller (PDC) - NTP server - time showing local CMOS clock
I'm having issues setting an external source on a Windows 2008 R2 domain controller (PDC emulator role for the domain) Here is the output showing its source is the Local CMOS clock. C:\Windows\System32>w32tm /query /status Leap Indicator: 0(no warnin
-
How do I get wrt54g-tm to work with Mac OS X with a cable...
How do I get wrt54g-tm to work with Mac OS X with a cable modem. Was told by tech support, they could not help me over the phone and to go on line for instructions. Still not working....
-
Hi I have created a Price List and attached to Busness Partner in "Payment Terms" price list but when i create sales order it does not show rates entered in price list Thanks
-
Create table from DBMS_SHARED_POOL.SIZES output
How can I create a table from the output of DBMS_SHARED_POOL.SIZES output ... If possible at all? Thank you !