HP Laserjet CP1025nw Color Printer - printer prints two copies when only one is requested.

pcwizard (HP) requested that I try Foxit Reader 5.1 to see if the printer will print properly. I used the same previous document and printed it with Foxit Reader 5.1. The printer printed two copies when only one was requested as it had done in the past. We still have a problem.
I am using Windows 7 (64 bit) for OS. I have experience the issue on two different computers.
dslledyrt
This question was solved.
View Solution.

Hi dslledyrt,
Can you install the Basic Driver for the printer on one of the computers, and let me know if you still have this issue?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-90357-1&cc=us&dlc=en&lc=en&...=
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

How to configure ePrint on LaserJet CP1025nw Color Printer

Solution found:
How to Configure HP ePrint on the LaserJet CP1025nw Color Printer
System: Windows (Widows 7)
Step 1 – Install Printer
Install the CP1025nw Printer to USB, Wifi or Ethernet.
(Printer needs to print correctly in order to pass to the next steps).
Step2 – Check Firmware Version
Press the “Info-Button” on the CP1025nw LaserJet for five seconds.
The printer will print two info pages.
Look at the first Page on the top-left for Firmware Version
Firmware version must be 20120103 or higher.
Step 3 – Update Firmware
Download Firmware Update utility (LJCP1020_FWUpdate_signed.exe) from the following link:
Utilidad de actualización del firmware de HP LaserJet CP1025nw
or
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-5&cc=es&dlc=es&lc=es&...=
Execute the Utility on the computer were the CP1025nw LaserJet is correctly installed.
Find the CP1025nw Printer on the list. The selection Window might show the printer several times depending on how the printer was installed. Select one option and press the button “Update One”.
Step 4 – Retrieve the Printer Code for your CP1025nw Printer
ATTENTION:
The “Host Name” of the printer is not the “Printer-Code” you need for ePrint setup.
To retrieve the Printer-Code you must run the ePrint-Setup-Wizard-Utility.
To download of the utility, go to the link: http://www.hp.com/go/ePrint .
Find the “HP LaserJet Pro CP1020 Color Printer Series” option in the Drop-Down-List.
Click “Windows” to download the wizard (EPrintSetupWizard.exe ).
Execute the Wizard on the computer where the CP1025nw Printer is correctly installed. After running the wizard press the “Info-Button” on the CP1025nw LaserJet for five seconds. The printer will print three info pages. The third info-page offers the Printer-Code you need for ePrint setup. The code is valid for 24h only. When time elapses you have to reprint the info-pages to get an actualized Printer-Code.
Step 5 – Get Printer Email for your CP1025nw LaserJet
In order ePrint on your CP1025nw Printer you need to assign an email address to your Printer. To do this, go to the following link: http://www.hpeprintcenter.com/
Log in with your HP-ID. If you don’t have one, register for a new account.
When logged in, click on “Add new Printer”-button. You will be asked to enter the Printer-Code. (On how to get the Printer-Code, see step 4).
While evaluating the Printer-Code, be patient, the program needs its time.
When the Printer-Code is accepted, you can assign an email address for your CP102nw5 LaserJet. Done this, your con print your CP1025nw Printer just by sending the documents per email to the email-address of your printer.
Done.

Hi Max, check out the link below...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4052972
Hope this helps
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Laserjet CP1025nw color, unable to change Print density

Hi,
I need to raise the "Print Density" to 5 (for pcb toner transfer) on my Laserjet
CP1025nw color, but when I open the printer properties I do not have that option
in the device settings tab, despite what is said on the help page of that model.
OS: Windows XP
The printer is on the USB port.
The pilot is: HP LaserJet Professional CP1020 Series + last update
How can I change that setting ?
Please help !!!
Thank you in advance for any help you can bring !
All the best,
This question was solved.
View Solution.

From what you describe you want to increase your toner density on your subsequent print jobs. First of all, if you have not, you should uninstall this printer and make sure that the drivers are the most up to date using the website I will link below :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4052972
Here you should also check for your firmware to be sure that it is up to date.
I would also, both before and after, check under "Printer Preferences" (not properties) and see if there is a way to change the density under the Paper/Quality tab.
Let me know if this helps you out!
-Spencer

I need to connect my wireless printer (HP LaserJet CP1025nw color) to the internet.

I need to connect my wireless printer (HP LaserJet CP1025nw color) to the internet. I recently have changed my name and password of my modem. Since the change I have lost connectivity between my computer and my printer. What do I need to do to regain connectivity? I am using Windows 7.
Trydell

I think you mean your password on your router right? Changed your SSID and/or password?
Try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP CC522A - HP LASERJET 700 COLOR MFP M775DN PRINTER dimension

HP CC522A - HP LASERJET 700 COLOR MFP M775DN PRINTER dimension
This question was solved.
View Solution.

HP CC522A - HP LASERJET 700 COLOR MFP M775DN PRINTER dimension

LaserJet CP1525nw color - does not print on HP glossy laser brochure paper

Hi,
For some strange reason my LaserJet CP1525nw color does not print on HP glossy laser brochure paper. It smears the color powder and makes lines on the paper. Does anybody know the reason for this?

Hello,
Thanks for the post. I've included a couple of links below that should assist with this one. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02182770&cc=us&dlc=en&lc=en&product=4052980&tmp...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02510644&cc=us&dlc=en&lc=en&product=4052980&tmp...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

HP LaserJet CP1025nw Color getting a Mispick error message

I have a HP LaserJet CP1025nw Color printer, running on WIN 7 64-bit and I am getting a Mispick error message after almost every page that prints. I have had this printer for the past 1-1/2 years and it has worked fine. I replaced the black toner over a month ago with no issues. The Attention light blinks and has to be rest after each print job. I can print a test page then it errors, I clear it and then it will re-print the test page again. I have cleaned the rollers, check for any loose paper pieces, changed the paper (type and size) nad have powered off & unplugged the power to the printer several times. It will come up with no errors and then once I send something to print, it will print it and then immediately after the page is printed the Attention light will start to blink. I have even gone as far as unintsalling the printer and reinstalling all the drivers and software, to no avail.
Any help would be greatly appreciated.
Thank you,
Jarm1964

This is probably a little late but it may help someone with the same issue in the future. I had the exact same scenario - HP LJ CP1025nw color on Win7-64 and it suddenly started receiving the mispick error after every print job. There was nothing stuck, no paper jam, no problem picking up paper, etc. It turns out it was a setting on the printer - under Printer Properties (from Devices and Printers), on the Configure tab I had checked Allow Manual Duplexing and Jam Recovery set to On. When I unchecked Allow Manual Duplex and turned Jam Recovery to Off, the mispick error went away. Not sure which of the 2 was the culprit.

Printing invoices with VF31 in only one spool request

Hello,
we want to print a number of invoices with VF31 using only one spool request, as at this time we become one spool request for each document.
The problem is that VF31 calls indirectly RSNAST00 and this program makes a call to the print program where we have OPEN_FORM and END_FORM each time, so this creates one spool request every time the program is called.
Is there a way to print in only one spool request without doing big changes to programs?
Thanks and regards.

Hi,
To append to an existing spool, see the SAP Notes 85318 and 16410.
For spools to be appended the parameters 'New spool request' and 'Do not Append Print Jobs' must be set to 'No' by the application creating the spools.
For Sapscript, when the application call the function module OPEN_FORM in your print program, you can transfer a structure ITCPO to the parameter OPTIONS. Via ITCPO-TDNEWID, you can select the option 'New Spool Request'.Via ITCPO-TDFINAL, you can can select if the spool is closed.
Regards,
Aidan

We have two iphones and only one ipad. We want to be able to use "find my iphone" for both phones, which have separate apple ids. How do we get our ipad to accept this?

We have two iphones and only one ipad - no mac. We want to be able to use "find my iphone" for both phones. How do we get the ipad to accept two iphone accounts? icloud is enabled on all three devices.

Also, be aware of the following:
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. Something as small as an iPod/iPhone should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

UCCX 8.5.1 SU2 Agent Line/Ext on Two IP Communicators - Only One Will Be Registered

I have a corner case where an agents laptop may use a local Gigabit Ethernet port or a different Gigabit Ethernet port located on a laptop docking station using IP Communicator 8.6(2).
Due to a requirement for QM/Compliance Recording (per Calabrio), we need to code the SEP<NIC MAC ADDRESS> for each potential port; meaning I will have two IPCs coded; each with a unique device name set to SEP<NIC MAC ADDRESS>.
The IP Communicators are set to generate their device name automatically. This means that they can only use / register one IPC at a time.
In the lab, having two IPCs configured with an identical line seems to function 100% when only one of IPC stations is registered to CUCM.
SRND and various posts state the usual about shared lines for agents being unsupported.
Does my scenario fit with "this is a shared line" which would force us to alter design and complicate the user experience with extension mobility?
Thoughts?
Code in use is CUCM 8.6 and UCCX 8.5(1)SR2; CAD is being exclusively used on Win 7.

Calabrio professional services has informed us (and it was re-confirmed) that IPC needs to present the NIC being used for CR/QM/AQM to provide desktop recording functionality.
Do you have experience where you have "hard-set" or statically configured the device name to one of the NICs (LAN) but it also worked for other interfaces with unique MAC addresses (WLAN, dock LAN, AnyConnect)?
Also, our Cisco SE posed this question via IM to his Cisco AS associate and got a conflicting report; the justification was that "shared" in UCCX context means two or more active-registered to CUCM phone appliances with identical DN/in any partition (versus the CUCM definition of identical DN in a single partition). He seemed to have direct knowledge of using two phone appliances associated to the same user/agent for a phone appliance migration effort (7940s to 7942s) where everything was pre-configured, the old phone was removed and the new one placed (only one entry was registered at a time).
Do I trust Cisco SE/AS resources or SRND?
Thanks

Hp laserjet pro color mfp will not wake up when print tasks are initiated!

Is there anyone that can assist me with a HP LaserJet color printer mfp 200 that weill not "WAKEUP" when print tasks are sent to the spooler?

These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and make your router secure and hack proof.
1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
    This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
    first if needed. More Wireless Printing help is here.
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
    printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
    Assistant, Printer Home Page (EWS).
In the router: (Refer to your router manual for information)
3. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
4. Set router to 20Mhz only, or 145Mbps depending on router.
5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
6. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
8. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
9. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Laserjet 200 color mfp m276nw print black not grayscale

I'm told the printer will print even black-and-white documents using "grayscale," which I'm told means it is using the color cartridges even to print black and white documents. Is there some way I can change this so that it prints black and white documents with only the black ink cartridge? I'm using Mac.

Hi Balderol,
I understand you would like to print black only. I found a document that will help guide you through the steps to set your print settings. This document says it is for 10.3 an d10.4, but the instructions will apply to the newer Mac versions as well. Mac OS X: Printing with the Black Print Cartridge Only Option.
I hope this is helpful.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How to scan using the Laserjet 100 color MFP m175nw printer

Hello,
My printer stopped printing suddenly so I downloaded the ePrint and it worked. . . but now I cant scan ! I dont have the option to scan.
Please help!

Hello,
Please run toHPPSdr firstly and follow the step if its show.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-141416-1&cc=us&dlc=en&lc=en...
If its not work may be we have to change the file name Twain_32 which located in C:\Windows
Please try and let me know if it is work or not .

Canon MX310 Printing two copies when I only want one

Hello-
Whenever I print a document to the Canon printer, via printer sharing on my network, it prints two copies. Number of copies is always set to 1, but it prints two.
It's crazy! Any ideas?
Thank you

I would suspect that it is something in the printer sharing, like two computers set to share it, and so the print job is sent to both of them. But you should try the usual suspects: Turn off printer sharing, reset the printing system on all computers, then add the printer on the sharing computer, turn on printer sharing on it, and then see if it still happens.

Laserjet CP1025nw color black and magenta lights blinking

Both the black and magenta cartridge lights are blinking even after replacing both with brand new genuine HP cartridges. Printer will not print configuration page or status page. It is completely unresponsive.
I've tried a full power reset - unplug, hold on powerkey for 30sec, plug back in...etc. To no avail.
Any ideas?

Hi @dmccullough,
I understand that after replacing the black and magenta toner, the lights for them are still blinking on the printer. I would be happy to help you.
Make sure all the packing material is removed.
Replacing Cartridges for HP LaserJet Pro CP1025 and CP1025nw Color Printers.
You can find the blinking light pattern in this document and the solutions appropriate to the pattern you are experiencing. Blinking Lights on the HP LaserJet Pro CP1025 and CP1025nw Color Printers.
If you are still having issues, I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
I have provided a website to check the toner to make sure it is Genuine, it may be detecting the toner as a non-HP toner.
HP LaserJet Pro - Non-HP black cartridge detected.
If you appreciate my efforts, please click the "Thumbs up" button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet CP1025nw Color Printer - printer prints two copies when only one is requested.

Similar Messages

Maybe you are looking for