HP LASERJET CP1525n COLOR PRINTER password problem

I forgot the login username and password of my HP LASERJET CP1525n COLOR PRINTER due to which i am unable to access the web pannel for administration like setting a new IP etc. Infact, i want to change it's IP setting which is configured to get IP via DHCP. I want to assign a static IP to my printer.
My printer is on network i.e. directly connected to network switch via network cable.
Please let me know if there is any solution for that.

any solution ???

Similar Messages

How to configure ePrint on LaserJet CP1025nw Color Printer

Solution found:
How to Configure HP ePrint on the LaserJet CP1025nw Color Printer
System: Windows (Widows 7)
Step 1 – Install Printer
Install the CP1025nw Printer to USB, Wifi or Ethernet.
(Printer needs to print correctly in order to pass to the next steps).
Step2 – Check Firmware Version
Press the “Info-Button” on the CP1025nw LaserJet for five seconds.
The printer will print two info pages.
Look at the first Page on the top-left for Firmware Version
Firmware version must be 20120103 or higher.
Step 3 – Update Firmware
Download Firmware Update utility (LJCP1020_FWUpdate_signed.exe) from the following link:
Utilidad de actualización del firmware de HP LaserJet CP1025nw
or
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-5&cc=es&dlc=es&lc=es&...=
Execute the Utility on the computer were the CP1025nw LaserJet is correctly installed.
Find the CP1025nw Printer on the list. The selection Window might show the printer several times depending on how the printer was installed. Select one option and press the button “Update One”.
Step 4 – Retrieve the Printer Code for your CP1025nw Printer
ATTENTION:
The “Host Name” of the printer is not the “Printer-Code” you need for ePrint setup.
To retrieve the Printer-Code you must run the ePrint-Setup-Wizard-Utility.
To download of the utility, go to the link: http://www.hp.com/go/ePrint .
Find the “HP LaserJet Pro CP1020 Color Printer Series” option in the Drop-Down-List.
Click “Windows” to download the wizard (EPrintSetupWizard.exe ).
Execute the Wizard on the computer where the CP1025nw Printer is correctly installed. After running the wizard press the “Info-Button” on the CP1025nw LaserJet for five seconds. The printer will print three info pages. The third info-page offers the Printer-Code you need for ePrint setup. The code is valid for 24h only. When time elapses you have to reprint the info-pages to get an actualized Printer-Code.
Step 5 – Get Printer Email for your CP1025nw LaserJet
In order ePrint on your CP1025nw Printer you need to assign an email address to your Printer. To do this, go to the following link: http://www.hpeprintcenter.com/
Log in with your HP-ID. If you don’t have one, register for a new account.
When logged in, click on “Add new Printer”-button. You will be asked to enter the Printer-Code. (On how to get the Printer-Code, see step 4).
While evaluating the Printer-Code, be patient, the program needs its time.
When the Printer-Code is accepted, you can assign an email address for your CP102nw5 LaserJet. Done this, your con print your CP1025nw Printer just by sending the documents per email to the email-address of your printer.
Done.

Hi Max, check out the link below...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4052972
Hope this helps
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Windows 7 and 8.1 drivers for LaserJet CP1525dw color printer

I am looking for printer drivers for my HP LaserJet CP1525dw color printer.
Specifically, I need the drivers for Windows 7 and 8.1, repsectively, if they exist for my color printer.
If not, how do I continue to use my LaserJet CP1525dw? It still works very well.
Thanks.
NorthTex4912

Hi @NorthTex4912,
I understand that you need the drivers for the Laserjet CP1525. I can help you with this.
Do you mean the Laserjet CP1525nw? How Do I Find My Model Number or Product Number?
Here is the URL for the printer drivers. Select your operating system, click next and click on the software to download and install. HP LaserJet Pro CP1525nw Color Printer Drivers.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet 400 Color MFP M475dw Problems in OS 10.9.4

I'm using a 2013 MacBook Pro, 2.4 GHz Intel Core i7, 9 GB 1600 MHz DDR3. I connect via wifi to the referenced printer (for almost a year now). Since updating to OS 10.9.4 I am able to print only one document at a time. Attempting to print a second document generates the message "Printer is not connected." If I turn the printer off and back on again, I'm able to print one document. Then the same thing occurs again. I have done the following so far, all to no avail:
Downloaded and installed latest driver (specifically for Mavericks) from HP
Checked for Apple software updates and found none
Reset the printing system (per instructions elsewhere in these forums)
I updated to OS 10.9.4 on July 5th and that is when this problem started. Where do I go from here???

And BTW, here's a repost of what I posted on July 7th:
I'm running a 2013 Macbook Pro, 2.4 GHz Intel Core i7, 8 GB 1600 MHz DDR3, OS version 10.9.4 (updated to this OS version 5 days ago, on July 2nd). For a little less than a year I've been printing to a HP LaserJet 400 Color MFP M475dw via wireless connection. A few weeks ago I began to have numerous "printer is not connected" events, and it reached the point I could not print anything - from my MacBook, my iPad Air, or my iPhone 5S. I discovered there was an updated printer driver on HP's website, specifically for OS 10.9. Downloaded and installed it, and the problem was seemingly solved.
Then I updated the OS to 10.9.4. AARRRRGH!!!!!! For the last 5 days, the printer will - sometimes - print the first document in a queue of 2 or more and then, while the printer is still "running," tell me the printer is not connected. I turn the printer off and back on, get one print job, then have to repeat the process. Here are all the things I've tried to resolve the issue:
Verified settings on the printer to make sure everything is set up properly
Restarted Airport Extreme, printer, and MacBook (multiple times) -- clarification: I turned off both the MacBook and the printer, then unplugged Airport for a few minutes, replugged it, restarted the printer, then restarted the MacBook
Reset the printing system (as suggested elsewhere in the Support forums), which basically removes all printers from the MacBook, then lets you add back those that you want - presumably with the most current driver(s).
Searched help/support forums on Apple, HP, and the internet in general
Found a firmware update for the printer on HP's website -- but it is not compatible with OS 10.9 (only goes up through 10.8). I downloaded it and tried, even though 10.9 was not listed, and the "app" wouldn't even open.
All of these efforts have been to no avail. The problem persists, and I'm at my wit's end how to solve it. HELP, please..........anyone??????

HP Color LaserJet CP1215 - Color printing - Page prints yellow background

Good morning --- I don't believe I have posted to this forum before, so I hope someone can help me solve this issue.
My CP1215 color LaserJet -
printing pref set to color-
printing a document with colored icons, etc. or color photograph
Results: the "background" or what should be the white area, is yellow - bright yellow.
If I switch printing pref to B/W, I get a black/white document or photo. Of course, no color.
I have replaced the yellow toner cartridge (HP product) TWICE, the second one just this morning.
There are NO error messages.
Tried running the cleaning tool; disconnect/reconnect, etc. No luck.
I gave up trying to solve this issue 2 years ago, and have kept the pref set to black/white with no tech issues.
Now, however, I have the need to print in color, and I would really like to figure out how to correct this problem.
This printer is a monster - ~30 lbs or more, and I would rather not have to haul it to a computer shop or ship it.
If anyone out there has had this problem, please let me know how/if you were able to resolve it. Many thanks.
Susan - Threecats

Hi Threecats
I understand when you print in color you are getting a yellow background.
I have included a document for troubleshooting the all yellow background printing.
Print out a configuration page from Solution eight first. This document will provide steps for cleaning and calibrating the printer. The Print quality troubleshooting page will identify the print cartridge that is causing the issue.
Let me know the results when you compare it to the one in the document and if the background printed yellow again. Also the Print quality troubleshooting page results.
What kind of paper are you using?
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Is there any way to fix the "Fatal Error" that my HP LaserJet CP1525nw color printer is having?cc=us

I am getting a "Fatal Error" when I am trying to install my HP LaserJet CP 1525nw color printer on my new wireless network (using the CD). Anybody have an idea how to fix this?

Take it in for service.

Laserjet 100 color MFP M175nw - problems connecting wirelessly to PC

I have just bought a Laserjet 100 color MFP M175nw and cannot connect wirelessly to my home network.
The installation goes to 99% and then gives an error message saying it took too long to connect, reboot and try again. Rebooted and tried again many times.
I have downloaded the latest installation prog. with the same result.
I have been able to connect with USB direct and can print, but not by Wi-Fi.
I have been able to connect the printer to my rooter by ethernet cable and can print that way also.
I am running Win 8.1 on a 64bit Lenovo computer.
Please can you advise a solution?
Thanks

Hi,
Yes. It's a bit embarrassing. Eventually, I went back to the instructions, and followed them to the letter for the WIFI setup - and it worked .
For me, the adage is true - "When all else fails, read the instructions."
So embarrassing!!!!!
Hope this helps.

Laserjet 2605dn color printing problem, Blue/green line on page.

I have an HP color laserjet 2605dn that has started to print a faint,thin blue/green line from top to bottom about 3 inches in from the entire right edge of every page. I ran the cleaning cycle with no change. Any suggestions on how to correct this?

I have very similar problem on my 2600n which is printing 2 vertical green lines very close together about 1.5 inches from left edge. All toners are in supply override mode with black toner reading: Estimated Pages Remaining 0
Color cartridges contain toner with 329 pp remaining according to supply status page.
Is this problem likely to disappear when toner cartridge(s) are replaced?

Hp laserjet 4500 color printer connection questions

I've got a HP 4500 color laser printer which I bought in 2000. Model # 4084A Serial number jphcf07074. I used it at my business on a network with a ethernet card connection. The business is closed, and the ethernet card has died. I am trying to connect this printer to my computers at home, but they do not have the connections for the standard printer cable. Is there a converter to USB or other idea on how to connect? My laptop runs on XP and my desktop runs Vista. Thanks.

There are USB to Parallel convertors, but results vary greatly and I have not seen a model that is reported to work well in Vista.
Your best bet may be to replace the network card, you might give eBay a look.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Laserjet 100 color MFP M175nw - Problem always visible to public network

I have an IBM laptop running on Windows 7. I know that supposedly the SSID is only supposed to be visible when printing, but mine is always available and visible in the Network Connections Internet Access Tray at all times. I can tell when neighbors try to log on using that as a wireless connection because the printer resets itself. How do I make the printer invisible on the network? The only way I can see to make it disappear from the list of available wireless networks is to turn the printer off. Is there another way?
I read:
"The network "HP-Print-b9-Laserjet 100" is the wireless direct ssid for your printer for on the spot printing, but is based on activity in a way (if there is no activity on the connection - i.e. Print jobs - the connection terminates)."
However, my connection is always available.
This question was solved.
View Solution.

There can only be two reasons for the SSID to be broadcasted: either the Ad-hoc is being listed or the Wireless Direct feature has been enabled (it is disabled by default).
The SSID definitely looks like a Wireless Direct SSID as an ad-hoc ID does not list print by default.
Perform these steps on the printer:
1. Go to Setup.
2. Go to Network Setup.
3. Go to Wireless.
4. Check that Wireless Direct is enabled. If it is, disable it and the SSID you listed should no longer be listed.
Now, the ad-hoc connection will then be broadcasted. Ad-hoc is the standard wifi adapter when there is no wifi network connection on the printer. Since you do not want the printer listed at all and you are using a wired connection, I recommend disabling the wifi feature all together.
This can be done by going to the wireless menu, where wireless direct was listed, and turn wireless off.
These steps will not affect Ethernet or USB connections. They will disable both Wireless Direct and the wireless radio completely.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP Laserjet CP1025nw Color Printer - printer prints two copies when only one is requested.

pcwizard (HP) requested that I try Foxit Reader 5.1 to see if the printer will print properly. I used the same previous document and printed it with Foxit Reader 5.1. The printer printed two copies when only one was requested as it had done in the past. We still have a problem.
I am using Windows 7 (64 bit) for OS. I have experience the issue on two different computers.
dslledyrt
This question was solved.
View Solution.

Hi dslledyrt,
Can you install the Basic Driver for the printer on one of the computers, and let me know if you still have this issue?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-90357-1&cc=us&dlc=en&lc=en&...=
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

LaserJet CP1025NW Color Printer - Weird cranking noise when printing or rotating carousel

Just out the package today, the first time turning on the printer, during all print jobs and when rotating the cartridges, the carousel is making a weird cranking noise coming from the left side of the printer. I understand that this printer does make the winding/power-up sound, but this cranking noise is in addition to the normal sound.
I find this odd because I use the exact same printer at work and it does not make this noise and I am afraid that it is a faulty mechanism within the printer.
I have checked to make sure that I removed all packaging from inside the printer and removed all cartridges and replaced them. I would think that all pieces that need to be removed would be bright orange. Also, the print jobs are not affected by the cranking noise.
Does anyone else have this problem?

Hi saidthegirl
I understand the printer is noisy but will print.
I have included the document for setting up the printer, to take a look at where all the packing material is located.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02469250&tmp_task=setupCategory&cc=us&dlc=en&la...
If the printer is making unusual noise and you are using the toner that shipped with the printer then I would recommend to call HP Tech Support for further assistance to see what other options are available for you.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet P1006 - GUI Print Options Problem

This printer works fine if I'm just printing with the default settings. However...
I want to be able to turn on EconoMode and turn down the Print Density to save on toner. Unfortunately, the driver is giving me one frustrating time. It looks like it works until I choose an option like 'Print Quality'.
What happens? I've uploaded a picture of what happens here: narkeeso.com/images/Picture%203.png
If you look the print options GUI jumps to the top left corner. No problem right? Just click on it... but NOOOOO you can't click on anything not even where it's suppose to be. It's as if that option doesn't exist.
I am using the latest driver off the HP site. Any help would be appreciated.
Message was edited by: Michael Narciso

printing was going fine and then after updating Office 2004, problem kept happening and then became unfixable when I upgraded to Leopard. Just got off phone with MS and they gave me a temporary fix... using key commands (command-P) will not get Word or Excel flies to print, but if you use the printer icon in the toolbar, it seems to work. However you can only print "all" pages, not a select range. MS said their engineers are working on it and hope to have an update to fix it so we can use command keys or selecting print from the "file" menu in each app. Hope this helps.

HP LaserJet 1525nw color printer - printing question

I have blue dashed lines 3/4" long printing horizontally in my left margin every 3"? Anyone have any idea how to fix this.

This article covers general print quality issue for your printer and should resolve your issue. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How do I install the PDL_Common it asks for when installing a Laserjet CP1525n Colour printer

Hi
During the installation process I get a pop-up asking for the CD with the PDL_Common. This error occurs during the print driver install. I dont have a disc for this, what can I do?
This question was solved.
View Solution.

Hi Lisam123
I understand you are getting the error PDL_Common during installation.
When you get the error try directing it to the c:, windows, program files or program files x86, then hp, laserjet to see if it is listed.
Try running the HP Printer Install Wizard for Windows. (Win7 and Win8 only)
Here is a url for the download for your Laserjet cp1525nw. Just select the operating system.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=4052980&lc=en&cc=us&dlc=en&lang=en&cc=us
Please provide the following information so I can assist you better.
What driver are you installing since you don't have the cd?
What operating system are you using? (winxp, win7, win8, win8.1)
How is the printer connected? (usb/ethernet/wireless)
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LASERJET CP1525n COLOR PRINTER password problem

Similar Messages

Maybe you are looking for