HP Laserjet CP1525nw and AirPrint

I have a brand new CP1525nw which is on the list of supported printers. It has the most up to date firmware available. My iPad is running the most up to date version.
I am unable to print to it with my iPad. A windows desktop can print to it wirelessly. When I try to use my iPad i simply get "No Printers Found"
Have i missed something? Any thoughts or ideas?

Your symptoms sound a lot like my 1525n (non-wireless) regarding AirPrint prior to updating its firmware.
Out of the box (brand new last week) AirPrint was not supported - computers could print to it, but no iPads/iPhones could see it. There was an available firmware update for it on HP's website, though. Applied it and AirPrint sprang to life. Since then there has been yet another update posted, released on 2nd Dec.
What is the date-code for the firmware on your printer? (The "HP Utility" app displays this on the Mac, I'm sure there's something equivalent on Windows). The latest update installs version 2010-11-25.
-- Ah, I see somebody else already asked that! Never mind.
Message was edited by: Mudge

Similar Messages

  • HP Laserjet p1102w and airprint

    i have a HP Laserjet p1102w (which supports airprint), it's on the same wifi network as my ipad2 ( os 5.0.1), however whenever i try to print from my ipad, it says no printer found, any suggestions?

    Seems long to me, but itmwould,depend on the size ofmthe update, network speed, yada yada.  I am tryingnto remember the steps,when i did mine, and i just cant.  At some point you probably have to turn the printer off, so it can reboot.  When it looks like it is done, it should,say so on the panel.  
    Worst case, when you are tired of waiting, reboot the printer, and see if it now shows up on your padmwhen you try to print.  If not, simply trymthe firmware update again.

  • Is driver for OSX 10.10 Yosemite available Laserjet CP1525nw?

    I am getting ready to update my computers to OSX 10.10 but noticed that the latest available driver is for OSX 10.9 Mavericks.  Will the Mavericks driver work with Yosemite?  If not, will a new driver be released, and if so, how soon?
    Thanks--

    @rain007 
    Great question regarding the different naming conviention between the HP Color Pro Laserjet cp1525nw and the HP Color Laserjet cp1525nw. These are actual the same printer so please don't get confused by the word "Pro" being added. 
    You will also notice that you now get your Apple drivers via the Apple Software Update or ASU. Here are a couple of reference documents that should be of help.
    Installing the Full Feature HP Print Driver in OS X v10.10 Yosemite with a USB Cable 
    Installing the OS X v10.10 Yosemite HP Print Driver from Apple Software Update
    If the driver is not located in the ASU, then the dmg file is located on the printer page. It does say the it is compatible with both 10.9 and 10.10. 
    cp1525 dmg file
    Let me know if you have any other questions.
    AuntieEm
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • How to for HP CP1525nw Apple AirPrint and Netgear WNDR3700 router

    How to setup AirPrint on an iPhone & iPad with a HP CP1525nw and Netgear WNDR3700 router
    Date written:  April 17, 2011
    I did this twice. It took 2 days the first time and 3 hours the second time. 
    Equipment used:
    iPhone 4 on AT&T
    iPad 2 on Verizon
    HP LaserJet CP1525nw color laser
    Netgear  N600 Wireless Dual Band Gigabit Router WNR3700 v2
    Abstract: Upgrade Apple products software, upgrade router firmware, upgrade HP Printer firmware and installer. In that order. Reboot a lot. Test as you go.
    APPLE - Upgrade iTunes to the latest version  10.2.1.1 Released around mid April, 2011.
    This will Upgrade iPhone 4 to version 4.3.2 (AT&T) Check in Settings under About.
    This will Upgrade iPad 2 to version 4.3.2 (Verizon) Check in Settings under About.
    NETGEAR - Upgrade the Netgear 3700 router from version 1.0.0.6 to version 1.0.0.8 using the built in webpage to check for updates. The router will download and install the updates. This will also update the built in Web setup GUI from 1.0.0.56 to 1.0.0.67.  Power off and on the router.  To see your version, check Status under Maintenance
    Now is a good time to setup Wireless security in the router. Set to WPA PSK (TKIP) + WPA2-PSK (AES). Uncheck Enable Wireless Isolation.
    Enter a password for both bands 2.4 GHz and 5.0 GHz, I used the same for both. (the iPad can use the 5 GHz WiFi band but not for printing {?} so use 2.4 GHz when you print.) You should give them different SSID names, like NETHOME and NETHOME-5. These will show up on your wireless devices (like the iPad but not iPhone)
    Make sure your computer, iPhone and iPad can connect to the internet before you go on.
    HP PRINTER – Go to HP’s website and down load the latest Installer and firmware for the CP1525nw.
    Printer webpage
    This is the webpage but you can just search for CP1525nw at the HP website.
    Select your Operating System, such as Win 7 32 bit. And look at the list of downloads that appear below.  Under Drivers (2), you want to download the HP LaserJet Full Feature Software and Driver. It says it is version 2.0 The Installer you will use is version 3.0.3.5253 as you will see.  The Installer on the CD is much older (1.4).
    Now under Firmware (1)  download the newest firmware utility for the printer.  HP LaserJet Firmware Update Utility.  The file name is  CP1525_Series_FW_Update-20101125.exe [1/1, 6.87M]
    Note the date is 20101125. My Printer had 20100430. These are the firmware version numbers.
    So 2 programs from HP. One is the Installer and the other is the Firmware Updater. You can just click on the HP Full Feature Installer to run it. No CD needed anymore. You have to get the printer working on the USB port next, and then you can update the firmware in the printer.
    You should uninstall any old drivers if it asks you. You are going to uninstall and reinstall 2 or more times. Uninstall old stuff, install new USB drivers from the new download, uninstall USB drivers, and install Wireless drivers.  But first get the USB working and printing. Print Config from the printer control menu to see your firmware version…. Reports/Config Report. Look at Firmware Date.
    Now you can double click the 2nd HP program to upgrade the Printer firmware.  The file is called CP1525_Series_FW_Update-20101125.exe  This will upgrade the firmware over the USB port. When it is done you will get a yellow Happy Face. You can print Config Report from the printer controls to see the firmware version… 20101125.
    Power off/on Printer.  Turn off cell phones, go into Airplane mode on the iPhone and iPad. You can turn on the iPhone and iPad WiFi but leave the 3G phone stuff off. This seems to be important, I think some of the “not found” problems are RF interference with the WiFi.  
    Run HP Installer again. Uninstall the USB driver and then run it again to install the printer as a Wireless Device. You will need to pick the router and enter the password so the printer can log on to the router. 
    Once you reboot the printer, check for the blue light on the front. Make sure the Wireless is turned on in the Printer Wireless settings.
    Your iPad and iPhone will go through the Router and back out to the Printer to print. Uninstall Print n Share, Print Pro and other printing helpers.  (for now) Try printing now.  It doesn’t work with Notes, so try printing in Safari with the BoxArrow icon.
    The first time you print, you should see the Printer in list, but I had to get out of the app and get back in to Print the first time. After that is works with the CP1525nw without picking the printer again. You will see a big print button.
    We so excited…. AirPrint works.  (Needs some printer settings…landscape?)
    Disclaimer – I don’t work for Apple, HP, Netgear, AT&T or Verizon. I work for free…  I would be willing to beta test for them, they need help.

    My question is if its possible for the N devices to still use N network while the G devices not demoting the whole wireless network to G?
    Yes. To do so, you would need to connect the Netgear to the new 802.11n AirPort Extreme Base Station (AEBSn) by Ethernet, and then, reconfigure it as a bridge (disable both its NAT & DHCP functions).
    In this configuration, the AEBSn & AXn can provide the 802.11n network and the Netgear can provide the 802.11g network.

  • I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    +For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
    This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
    *Settings I have Enabled*
    5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
    Use Wide Channels is recommended for 5 GHz operation.
    Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

  • Hp laserjet cp1525nw will not sync to wireless after the Internet network is lost and returns

    My hp laserjet cp1525nw works fine UNLESS the cable modem losses signal. At this point the blue light on the printer blinks. This continues after the signal comes back from my ISP. The only way to get the printer to work wirelessly again is to power cycle it. I have tried pushing the wireless button below the blue lite. My J6480 works fine.
    Any ideas,

    Hey there @FC111 , welcome to the HP Community
    If you are running a Windows OS, you can try running the Print and Scan Doctor to potentially find your home network again and connect to it. If that does not work, try Uninstalling the Printer Software and reinstalling the printer.
    I hope that helps, let me know the results and which OS you're running.
    Happy Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Problem getting Airprint (Bonjour) to communicate to HP LaserJet CP1525nw printer across a Cisco 5508 Wireless Controller

    I cannot get my IPad2 to print (it cannot find the printer) using a Laserjet CP1525nw color printer across a wireless network using a Cisco 1508 Wireless Controller with 49 wireless access points. HELP!!!!
    What is the secret to getting Bonjour to work on it?
    I can get the IPad2 to locate the HP CP1525nw printer without a hitch using a low budget Netgear WAG102 stand alone wireless access point on the same network.

    If it helps somebody, here is what you need to do.
    It worked for me, but only in Multicast-Unicast mode.
    http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0 080bb1d7c.shtml

  • Cannot enable ePrint/Web Services, HP LaserJet CP1525nw

    I am trying to follow HP's instructions for enabling ePrint and Web Services for my LaserJet CP1525nw.  I printed the Config Report, got the printer's IP address and entered it into a brower as instructed.  It does pull up summary page, but there is no "HP Web Services" tab as indicated in all of the HP instructions I can find - only four tabs that read: Status, System, Print, Networking.
    I have looked at all sub-menus under each of these tabs, and cannot find anything that even resembles a "Web Services" option.
    Can somebody please help?  Or is there another way to find the printer's email address so that I can register and use ePrint for my iPhone and iPad?  
    From what I have been able to find on HP Support, the Airprint software driver(s) are not yet availble for this LaserJet model - or are they?   

    There is firmware to enable AirPrint in the HP LaserJet CP1525nw.
    Go to the support page for this printer:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=40529...
    and pick the type of desktop computer you are using. On the resulting page you will see a choice to download a firmware updated that you can run on your computer to update your printer.

  • LaserJet CP1525nw & WPA-enterprise

    We bought a LaserJet CP1525nw printer because of its airprint support for printing from our iPads. Our wireless network uses WPA-enterprise security.
     We are unable to connect the printer to the wireless due to the enterprise authentication. ipad is unable to find the printer.
     We need  printing from the iPads, ePrint does not offer.  Any help would be much appreciated. Firmware 20110329.

    Hello,
    If you have not already, I might recommend going here and then looking at the link for iPad printing for ePrint/Airprint or ePrint Home and Biz.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02784317&tmp_task=useCategory&cc=us&dlc=en&lang...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

    HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
    OS: Windows 7 Ultimate x64
    Browser: Google Chrome 15
    HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
    Printer is connected by WiFi to 4 computers

    Hi AbZu, 
    You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
    http://support.google.com/chrome/?hl=en
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Enable Web Services on HP LaserJet CP1525nw

    We are trying to setup web service printing on HP LaserJet CP1525nw.
    This is a networked printer, from a windows server 2008 R2 server to Windows 7 x64 machines
    It is connected to a wired network and everything (printing etc) works execpt web service.
    We have set the DNS manually to 8.8.8.8 and secondary dns to 8.8.4.4 and restarted
    We also have white listed the Printer IP on the firewall so it has access to internet through the network without being filtered. (Does anyone know what are the IP address for the web services on the HP side?)
    When we access the Printer using its IP and go to Web Services Setup and hit 'Enable' it sits on that screen for about 2 minutes and failed
    "Connection error Check connection"
    Any advise is much appreicated.
    This question was solved.
    View Solution.

    Success its working now !!

  • Hp laserjet cp1525nw

    I recently purchased the Laserjet CP1525nw color printer and 256MB ram upgrade (non HP).  The printer works fine without the ram inserted.  I had our vendor replace the ram and still the yellow triangle on the printer lights up and doesn't print until i remove the ram.  The HP ram is about $400 so i didn't get that and got the $50 one from another manafacturer.  Has anyone else had this issue?  Will this printer only accept that particular ram chip?  $400 for 256MB seems ridiculous!  Any assistance would be greatly appreciated.  The firmware is up to date and my last option is to contact HP and see if they can assist.  Thanks.

    Hey Dan_the_Man_21,
    Welcome to the HP Forums!
    One way to fix the option of having the menu disabled, is to try and re-enable the option through the Embedded Web Server (EWS) of the printer. To be able to access the EWS, you will need to print a configuration report to get the IP address of the printer. I have included the document 'Printing a Configuration Report'.
    Next you will need to open up your Internet browser, and type the IP address into the address bar. Once the page loads with your printers information, you will need to click on the System tab. Then click on Administration on the left hand side.
    Please let me know if this works for you.
    I worked on behalf of HP

  • HP LaserJet CP1525nw menu access

    I am unable to access the Service Menu on my HP LaserJet CP1525nw printer. I get a message saying "Menu access is diabled". Any help I can get with this issue would be greatly appreciated. Thank you.

    Hey Dan_the_Man_21,
    Welcome to the HP Forums!
    One way to fix the option of having the menu disabled, is to try and re-enable the option through the Embedded Web Server (EWS) of the printer. To be able to access the EWS, you will need to print a configuration report to get the IP address of the printer. I have included the document 'Printing a Configuration Report'.
    Next you will need to open up your Internet browser, and type the IP address into the address bar. Once the page loads with your printers information, you will need to click on the System tab. Then click on Administration on the left hand side.
    Please let me know if this works for you.
    I worked on behalf of HP

  • HP LaserJet CP1525nw makes terrible swealing noise when printing

    Product:  HP LaserJet CP1525nw
    OS:  Windows 7
    Error Msg:  none
    The product makes a loud squealing noise when printing.  It also leaves streak marks on envelopes.
    Product was purchased Dec. 21, 2010, so is only a little over one year old, but is out of warranty.
    Please also advise where I can find authorized HP LaserJet repair in Brooklyn, NY.

    Hi Grey_Ghost;
    Hope you are doing and sorry that you are having this issue;
    Call here : 1-800-625-0242  
    They may be able to guide you or provide with that information.
    I did Google search and found a few in the New York city area Perhaps doing this may help you as well; 
    Hope It helps; 
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Color laserjet CP1525nw won't print in color

    I installed both the PCL6 and PostScript drivers on my Surface Pro 3 to print to my Color LaserJet CP1525nw.  The printer is connected to my router.  The printer prints but only in grayscale.  What can I do to be able to print in color and continute to print through my router?
    This question was solved.
    View Solution.

    Hi @PaDunc ,
    I see that you are experiencing issues printing in color from the printer connected to the router. I would be happy to help you.
    Please clarify, if the printer is connected to the router by a ethernet or USB cable?
    Did you install just the Universal Print Drivers or did you try the Full Feature Software also?
    I would recommend the Full Feature Software if that isn't one of the drivers you have already tried.
    Try and print the Supplies Status page to see if you have color, just to rule out a hardware issue.
    Printing or Viewing the Supplies Status Page.
    Make sure the greyscale option isn't enabled in the print driver.
    1. From Devices and Printers, right click your printer.
    2. Then click the Printer Properties, Preferences button.
    3. Click the Color tab.
    4. Make sure Print in Grayscale isn't checked.
    Did the colors print?
    What are the toner levels?
    Are you using Genuine HP Toner?
    Try these steps in this document, to see if it will resolve the issue.
    Resolving Print Quality Issues.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for

  • Calling web service from Obiee

    Hi, I want to get data from webservice and show the results in a dashboard. I checked http://www.artofbi.com/index.php/2009/08/consuming-a-web-service-in-obiee-presentation-services-using-jquery-cdn/ web site. But the author is retrieving data from a

  • HOW DO I INSTALL PREMIERE PRO ON MAC?

    HOW DO I INSTALL PREMIERE PRO ON MAC?

  • No DNS settings when using built-in (hardwired) ethernet

    Iv'e never had an issue with wireless operation, but now that a wired connection is necessary, I've run into something strange. When connecting to a LAN with a DHCP source providing IP, router, DNS settings and more, the ibook fails to populate the D

  • Workflow Task

    Can anyone give me some idea regarding Workflow task and what is the use of this. Thanks

  • Availability Check on Subcontract Component

    We have a one to one ratio of component (B) to Finished Goods (A)  ratio for our BOM quantity.  PO is for 15 ea of  Material A.  There is only 12 ea of Material B at the vendor.  System allows me to Post Goods Receipt all 15 Material A without any er