HP LaserJet M1005 MFP and Windows 7 - Won't Install

I have just acquired an HP Notebook which connects well to an old HP LaserJet 6L as a local printer, but it won't connect to the HP LaserJet M1005 MFP. It does not find drivers when it searches on the net, and the drivers won't install from the CD which came with the printer either - it just hangs after a while.
I read some posts from other people who also have related problems. Can anybody help please?

The Windows 7 32-bit Print/Scan driver software can be found here <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1839459&...>.
The Windows 7 64-bit Print/Scan driver software can be found here <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1839459&...>
You are correct though, the installer on the CD does not support Windows 7 and there are no driver in Windows 7 or in Windows Update for this product. Hope this helps.

Similar Messages

Driver for HP LaserJet M1005 MFP for Windows 7

Scaner not working

Hello Nishant_121,
Welcome to the HP Support Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Laserjet M1005 MFP won't work with a DLINK DPR-2000 Print server.

I have an HP Laserjet M1005 MFP and am trying to connect it to a DLINK DPR-2000 Print server. After the setup no matter what I do the Laserjet shows up as offline on the print server. The print server recognises it as the correct model it's just always offline aned hence I can get nothing to print.
I have done the latest firmware upgrade on the printer to 20120910.
Any ideas?

Sounds like you are having an issue getting this printer to be recognized fully on the network the print server is set up on. First of all, what all can you tell me about the network environment it is operating on? I would suggest that you try installing the PL6 drivers fro this laserjet after removing the original software and see if that gives you greater control over the machine and its functions :
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodTypeId=...
Let me know how that goes!
I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here!
-Spencer

HP Color Laserjet CM1312nfi MFP and OSX Yosemite

Hello all. I have a HP Color Laserjet CM1312nfi MFP, and i can't install it on OSX 10.10 Yosemite. When i plug in the USB cable, nothing happens. My Mac does not find the printer, and i can't install driver from HP's website. All USB ports in my Mac works, and i can plug the cable in a Windows computer, where there is no problem at all. I tried to update the firmware through a Windows computer, but it did not helped. Any suggestions?

The HP drivers won't load on my 10.10.x (10.10.1 thru 10.10.4) OSX macbook pro. The install says the version of OSX isn't supported even thought I've tried 1.5.0 dmg file which is for 10.7 and greater. I did the math and I believe 10.10.x is greater than any version of 10.7. I also tried HP Easy Scan and it doesn't even see my scanner. Printing works fine, but I scan a lot of paper. Also, I've found that the Mac OSX version of the HP software (when it still worked) creates obscenely large PDF files. I can get around this by opening Adobe Acrobat Pro and re-saving the file as a reduced file size with the same name. I can take a 25 MB file HP creates and get it down to about 300KB or so. I found a way around all this but you won't like it. I've loaded Parallels (installed windows 7 ultimate 64 bit) and installed the windows client in my parallels image. The windows client works fine. Not a solution I prefer, but this is an HP issue not an apple issue .... HP hasn't put out a driver for this printer in the better part of 3.5 years. Lastly, I'm not hooking up a USB cable to my printer/fax/scanner .... what's the point of having a dhcp network capable printer if I have to hard wire to a PC? I've used HP printers since the mid-'90s, but I guess it's time to find a company that supports OSX.

HP laserjet M1005 MFP for 64 bit for windows 8.1

I am unable to install HP laserjet M1005 MFP for 64 bit for windows 8.1 on my new notebook. Kindly help.

Hello Thomas53
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Cannot scan with HP LaserJet M1005 MFP

I updated to Snow Leopard 10.6.3 yesterday. Big mistake as I cannot now scan with my HP LaserJet M1005 MFP. I have been unable to find a solution here or via Google. Does anyone know if this is possible? I realize this device has never been "Mac friendly" (one might even say, not compatible.... despite HP's over-generous claims), but I would have thought there would be a new driver for SL by now.
If not, could anyone recommend a non-HP scanner (not MFP) that works well with SL?
thanks!

Hi @3Digit ,
I see that you are having issues scanning, there isn't any scanning software in the HP folder. I would like to help you out today.
Open the HP Scan window with one of the following methods:
Double-click the HP Scan icon () for your printer on the Windows desktop.
Click the Windows icon (), click All Programs, click the HP folder, click the name of your printer, and then click HP Scan.
If you are missing the HP Scan software altogether, then the full software didn't install on the computer.
If that is the case, uninstall and reinstall the printer software. Here is the link for the newest drivers. Software & Drivers.
First do these steps, before installing the software, just to make sure it fully installs.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
I have provided a document for how to scan. It is for Windows 7, but the steps will also work for Windows Vista.
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet M1005 MFP

Our company is using a HP LaserJet M1005 MFP all in one printer. this machine we purchase when our organisation had 2 staffs. but now we have 8 staffs and found difficult to handle this printer especially for scanning purpose.
kindly advise us, how can we convert this unit into a network printer and scanner. i am told by the supplier that we can convert this to a network printer but scanning won't work. we have to have a lot of scanning works to do from all the staffs.
For Suhem

The printer only has USB connectivity. Its not impossible but very difficult. I would recommend getting an MFP with network capability.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Airprint to HP LaserJet M1212nf MFP from Windows

Hi!
I have a HP LaserJet M1212nf MFP, and connected it to the network via Ethernet, and was elated when I saw that I could Airprint (wirelessly) from all 3 iPhones and the iPad in the family!
I was not very elated when my 3 windows printers can only ePrint by using attached docs to emails, and then only certain formats. I would expect this lack of funtionality from an Apple specific printer, but not from an HP printer!
Through Googleing I saw what I thought was the answer: To fool my PC into thinking it can (wirelessly) print to an airprinter through the network, but nothing panned out as being that...
Really disappointed in HP this time. Any suggestions?
Thanks in advance
Joe

Hello Joe_In_Missouri,
Thank you for being an active member of the HP Support community. I understand that you were having issues printing wirelessly from you Windows computers to your Laserjet M1212nf.
I see you have received a solution on how to do this on another thread. If you need the link again you can find the solution here.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP laserjet 400 mfp and Laserjet 200 mfp

I have 2 printers HP Laserjet 200 mfp and HP Laserjet 400 MFP. I tried HP phone support. I checked each printer on 2 diffent networks to make sure it was not my setup. When I try and setup both printers with Web Services they both say unable to connect to the internet. I did a firmware update on both printers no help. HP told me that I needed to have a DMZ setup ie. port forwarding I don't think this is right.
Thanks
O.D. Smith (HP Retired)

Hi Smith,
Welcome to Consumer Support Forum.
As per the request you have 2 printer and u want to connect through n.w
In 400 mfp printer, please connect the n/w cabel(Physical Cabel)
and print a configration report, you will get the ip address of the printer.
I want you to check the ip of the printer and the ip of the computer are in same range or not, if its in same range
please try to ping the ip through command prompt winodw
Once reply from the printer is confirmed printer can be installed easily.
Please reply if the issue persist.
Regards
HP

I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format"

I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format". Can someone please help me sort this problem, it's so frustrating!!!!!!

It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
B-rock

Recovery = Windows won't install from recovery discs

I have a dv6, performed recovery off the purchased 2 discs, and it says Windows won't install. Also, will not let me log into administrator...says my account has been disabled. Need help asap, on roomies pc.

I also tried using a HP Windows Recovery Disk from HP for my HP G71-340US Notebook Computer, but it repeatedly fails the installation with the message:
"No OS Flag Set on Unit. Please use EEPROM to set OS SKU value = 2. Error RStone S Update SRU option configuration is invalid, Loc # cound not be found in product #. Next step: Please use EEPROM to set Loc # in either SKU # or CTO localization code".
This occurs repeatedly when trying to run the Recovery Disk from HP.
I believe there is an EEPROM problem, but I do not know what to try next. I have backed up all my persoal data, but everything is wipped off the hard disk, currently. I can get into the BIOS, but that does not seem to be of any help. HP tech support is of no help.
Thanks for any help or recommendations.
Dan

Restored iPod, and it won't install the 5.0 update. What can i do?

I restored my ipod for the most recent update from 4.0 to 5.0 and it won't install the software, it just keeps freezing at exactly the same point each and every time.

At what stage does it freeze? What is showing in the status bar?
This may be applicable:
Hang during restore process: Following Troubleshooting security software will frequently resolve this error. This error can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
There are two ways to resolve this:
You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
For Windows XP, Windows Vista, Windows 7: Go to the C:\\Windows folder and launch regedit.
Go to Edit > Find.
Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
Delete the "TcpWindowSize" entry.
Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
Close Regedit, restart the PC, and test.
If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
From:
http://support.apple.com/kb/TS3694

I bought lightroom 6 upgrade and it won't install

I bought lightroom 6 upgrade and it won't install.
I download the file and run set up, I log into adobe and then it says it does not find a product
Ihave lightroom 5.71 installed at present.
I spent 24 hours waiting to install and then when I download it won't install!!!!
I am not happy.

I get this error if I try to download from link in my account. Using Chrome on Windows 7
413
Header Length too Large
https://store1.adobe.com/cfusion/store/html/index.cfm?event=displayDownloads&orderNumber=A D002894780UK

Does final cut 5 work on 10.7 lion as it was but i bought a new macbook air and it won't install now ?

does final cut 5 work on 10.7 lion as it was but i bought a new macbook air and it won't install now ?
i had it work on my second gen mba but now it wont work

Hi David
I meant to say 5.1 the problem I've got is it's saying it does support ppc software but I have got the intel version but for some reason won't install from disc but if I transfer from time-machine backup it works
But then it won't read my project it's so strange just don't get it

Help me I bought PSE 13 and it won't install on my new HP ENVY notebook.

Help me I bought PSE 13 and it won't install on my new HP ENVY notebook. Error 7.

cs5,cs5.5: https://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
lightroom: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html
photoshop elements 13: Installation errors | Exit Code: 6 and 7 suberrors
premiere elements: http://helpx.adobe.com/premiere-elements/kb/updated-installation-instructions-premiere-ele ments.html

HP LaserJet M1005 MFP and Windows 7 - Won't Install

Similar Messages

Maybe you are looking for