HP Laserjet M1005 MFP won't work with a DLINK DPR-2000 Print server.

I have an HP Laserjet M1005 MFP and am trying to connect it to a DLINK DPR-2000 Print server.  After the setup no matter what I do the Laserjet shows up as offline on the print server.  The print server recognises it as the correct model it's just always offline aned hence I can get nothing to print. 
I have done the latest firmware upgrade on the printer to 20120910.
Any ideas?

Sounds like you are having an issue getting this printer to be recognized fully on the network the print server is set up on. First of all, what all can you tell me about the network environment it is operating on? I would suggest that you try installing the PL6 drivers fro this laserjet after removing the original software and see if that gives you greater control over the machine and its functions :
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodTypeId=...
Let me know how that goes! 
I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here! 
-Spencer 

Similar Messages

  • HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

    Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
    HP Color LaserJet Pro MFP M177fw) is not working with this OS.
    Give me a urgent solution

    Hi @HealthITLadyRed,
    I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
    I have provided some steps to try to see if we can resolve this issue.
    Check and remove any packaging material inside the printer and toner.
    Disconnect the USB/Network/FAX and power the printer on Standalone.
    Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    Update the printer's firmware by a USB connection. Software and Drivers.
    Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
    I can send a private message with another step to try.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet/Wireless)
    What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
    Is this a new printer?
    If you appreciate my efforts, please click the Thumbs up button below.
    If there is anything else I can help you with, just let me know. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Director software won't work since I installed Linksys Wireless Print Server

    I have an HP 5510 Office Jet all in one.  It comes with bundled software called HP Director that enables scanning, printing, and faxing.  The software worked fine while I had the printer connected to my pc with a USB cable.
    To give myself flexibility I installed a WPSM54G Linksys Wireless G Printserver.  There is no direct connection between my printer and pc anymore.
    Printing still works fine.  This is being handled by the Linksys software.
    The HP Director no longer can find the printer.  When I try to scan (for example) using HP Director, I get a message that "an error occurred communicating with the printing device...".  It presumably is looking for a direct USB connection, and not finding one.
    I can't find a fix on the HP site, but I imagine there must be one.  Wireless print servers have been around for quite a while.  Is there a download that will solve this problem?
    Thanks for your help.

    kts0347 wrote:
    ...My printer interfaces wirelessly through my print server.  So, HP Director doesn't see the printer, and fails to run the tasks it is offered for - scanning, photos, faxes....
    Exactly my point.  These services: scanning, photos and faxes will never work through a print server.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My HP Deskjet F4280 printer won't work with my new HP 2000 laptop w/ windows 8.1

    I have a HP Deskjet F4280 printer. I recently bought a HP 2000 laptop. I put the printers install disk in the laptop to set up my printer but it says windows 8 doesn't support that printer! It also does say that windows 2000, XP, Vista are supported on the disk for the printer...help! Is there a work around?

    Hey Alyssa426,
    Welcome to the HP Forums!
    Since the installation disk does not support Windows 8.1, I would suggest trying to download, and install the drivers directly from the HP Support website. I have included a link to the 'HP Deskjet F4200/F4224 All-in-One Printer series Full Feature Software and Driver'. Once the software is downloaded, open the software, and follow through the on screen instructions for installation.
    Please let me know the outcome of installing the software.
    Thank you.
    I worked on behalf of HP

  • Mavericks won't work with my cannon printer/scanner Cannon MP560 what can I do to solve this?

    mavericks won't work with my cannon  Cannon MP560 printer/scanner what can I do to solve this?

    Try restarting the device first..
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
    Then press and hold the Sleep/Wake button until the Apple logo appears.
    If that doesn't help, try here > iOS: Troubleshooting Messages

  • HP LaserJet M1005 MFP and Windows 7 - Won't Install

    I have just acquired an HP Notebook which connects well to an old HP LaserJet 6L as a local printer, but it won't connect to the HP LaserJet M1005 MFP.   It does not find drivers when it searches on the net, and the drivers won't install from the CD which came with the printer either - it just hangs after a while.
    I read some posts from other people who also have related problems.   Can anybody help please? 

    The Windows 7 32-bit Print/Scan driver software can be found here <http://h20000.www2.hp.com/bizsupport/TechSupport/S​oftwareIndex.jsp?lang=en&cc=us&prodNameId=1839459&​...>.
    The Windows 7 64-bit Print/Scan driver software can be found here <http://h20000.www2.hp.com/bizsupport/TechSupport/S​oftwareIndex.jsp?lang=en&cc=us&prodNameId=1839459&​...>
    You are correct though, the installer on the CD does not support Windows 7 and there are no driver in Windows 7 or in Windows Update for this product. Hope this helps.

  • Cannot scan with HP LaserJet M1005 MFP

    I updated to Snow Leopard 10.6.3 yesterday. Big mistake as I cannot now scan with my HP LaserJet M1005 MFP. I have been unable to find a solution here or via Google. Does anyone know if this is possible? I realize this device has never been "Mac friendly" (one might even say, not compatible.... despite HP's over-generous claims), but I would have thought there would be a new driver for SL by now.
    If not, could anyone recommend a non-HP scanner (not MFP) that works well with SL?
    thanks!

    Hi @3Digit ,
    I see that you are having issues scanning, there isn't any scanning software in the HP folder. I would like to help you out today.
    Open the HP Scan window with one of the following methods:
    Double-click the HP Scan icon () for your printer on the Windows desktop.
    Click the Windows icon (), click All Programs, click the HP folder, click the name of your printer, and then click HP Scan.
    If you are missing the HP Scan software altogether, then the full software didn't install on the computer.
    If that is the case, uninstall and reinstall the printer software. Here is the link for the newest drivers. Software & Drivers.
    First do these steps, before installing the software, just to make sure it fully installs.
    I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
    I have provided a document for how to scan. It is for Windows 7, but the steps will also work for Windows Vista.
    Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers
    How is the printer connected? (USB/Ethernet/Wireless)
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet M1005 MFP

    Our company is using a HP LaserJet M1005 MFP all in one printer. this machine we purchase when our organisation had 2 staffs. but now we have 8 staffs and found difficult to handle this printer especially for scanning purpose.
    kindly advise us, how can we convert this unit into a network printer and scanner. i am told by the supplier that we can convert this to a network printer but scanning won't work. we have to have a lot of scanning works to do from all the staffs.
    For Suhem

    The printer only has USB connectivity.  Its not impossible but very difficult.  I would recommend getting an MFP with network capability.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP laserjet M1005 MFP for 64 bit for windows 8.1

    I am unable to install HP laserjet M1005 MFP for 64 bit for windows 8.1 on my new notebook. Kindly help.

    Hello Thomas53
    Welcome to the HP Forums.
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Thanks for your time.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

    My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

    Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

  • New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

    New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

    No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
    A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
    You can get 10.6.8 here:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • TS1363 "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    Hi cueball819,
    Thanks for using Apple Support Communities.  This article has steps to try if your iPods aren't recognized by iTunes or Windows:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • Itunes updated and now it won't work.  I unstalled it and reinstalled the older version and it still won't open. Says the itunes library won't work with the older program. Help

    Itunes updated and now it won't work.  I unstalled it and reinstalled the older version and reinstalled a older version and it still won't open.  Says the itunes
    library won't work with the older program.  Please help

    It says it cannot removed the older version of iTunes.
    Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

  • I would like to update to Firefox 5.0.1, but I can't due to, too many things won't work with the version & will be disabled.

    I have wanted to update from 3.6.22, to 5.0.1, but can't do to the following reasons: I can't due to, too many things won't work with the version & will be disabled. They are: Microsoft. NET Framework Assistant 1.2.1, Iconix 3.90.1, HP Detect 1.0.5.1, Yahoo! Toolbar 2.3.5.201101200332202 (I don't care about Yahoo! Toolbar, because I don't use it!). As soon as these issues are fixed, I will be able to update, to the latest versions. These issues should be fixed & ready to work, before a new version is available. Thank you!

    Try using this extension to force compatibility.
    * https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
    Check and tell if its working.

  • I have a Canon D60 camera, my raw files won't work with the raw converter in my Photoshop CS5. Do I need CS6?

    Photoshop CS5 won't work with the raw files from my new Canon D60 camera. Do I need CS6?

    A Canon EOS D60? It had support since Camera Raw version 1.0.

Maybe you are looking for