HP LaserJet M1005 MFP

Our company is using a HP LaserJet M1005 MFP all in one printer. this machine we purchase when our organisation had 2 staffs. but now we have 8 staffs and found difficult to handle this printer especially for scanning purpose.
kindly advise us, how can we convert this unit into a network printer and scanner. i am told by the supplier that we can convert this to a network printer but scanning won't work. we have to have a lot of scanning works to do from all the staffs.
For Suhem

The printer only has USB connectivity. Its not impossible but very difficult. I would recommend getting an MFP with network capability.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

HP LaserJet M1005 MFP and Windows 7 - Won't Install

I have just acquired an HP Notebook which connects well to an old HP LaserJet 6L as a local printer, but it won't connect to the HP LaserJet M1005 MFP. It does not find drivers when it searches on the net, and the drivers won't install from the CD which came with the printer either - it just hangs after a while.
I read some posts from other people who also have related problems. Can anybody help please?

The Windows 7 32-bit Print/Scan driver software can be found here <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1839459&...>.
The Windows 7 64-bit Print/Scan driver software can be found here <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1839459&...>
You are correct though, the installer on the CD does not support Windows 7 and there are no driver in Windows 7 or in Windows Update for this product. Hope this helps.

HP Laserjet M1005 MFP won't work with a DLINK DPR-2000 Print server.

I have an HP Laserjet M1005 MFP and am trying to connect it to a DLINK DPR-2000 Print server. After the setup no matter what I do the Laserjet shows up as offline on the print server. The print server recognises it as the correct model it's just always offline aned hence I can get nothing to print.
I have done the latest firmware upgrade on the printer to 20120910.
Any ideas?

Sounds like you are having an issue getting this printer to be recognized fully on the network the print server is set up on. First of all, what all can you tell me about the network environment it is operating on? I would suggest that you try installing the PL6 drivers fro this laserjet after removing the original software and see if that gives you greater control over the machine and its functions :
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodTypeId=...
Let me know how that goes!
I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here!
-Spencer

Cannot scan with HP LaserJet M1005 MFP

I updated to Snow Leopard 10.6.3 yesterday. Big mistake as I cannot now scan with my HP LaserJet M1005 MFP. I have been unable to find a solution here or via Google. Does anyone know if this is possible? I realize this device has never been "Mac friendly" (one might even say, not compatible.... despite HP's over-generous claims), but I would have thought there would be a new driver for SL by now.
If not, could anyone recommend a non-HP scanner (not MFP) that works well with SL?
thanks!

Hi @3Digit ,
I see that you are having issues scanning, there isn't any scanning software in the HP folder. I would like to help you out today.
Open the HP Scan window with one of the following methods:
Double-click the HP Scan icon () for your printer on the Windows desktop.
Click the Windows icon (), click All Programs, click the HP folder, click the name of your printer, and then click HP Scan.
If you are missing the HP Scan software altogether, then the full software didn't install on the computer.
If that is the case, uninstall and reinstall the printer software. Here is the link for the newest drivers. Software & Drivers.
First do these steps, before installing the software, just to make sure it fully installs.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
I have provided a document for how to scan. It is for Windows 7, but the steps will also work for Windows Vista.
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP laserjet M1005 MFP for 64 bit for windows 8.1

I am unable to install HP laserjet M1005 MFP for 64 bit for windows 8.1 on my new notebook. Kindly help.

Hello Thomas53
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Windows 7 64-bit & HP LaserJet M1005 MFP Printing problem

I have installed the latest available drivers (as of 26rd October 09) for HP LJ M1005 MFP printer
on Windows 7 64-bit Enterprise. Printer connected over USB.
I can't print more than two pages from any application.
It stop printing after two pages and have a message on LED "Printing Document".
Nothing is in the print queue.
Printer well working on WinXP, Win2003, Win2008 x64.
Anyone else have this problem? Or even a solution?
Sorry for my bad English.

I retried the installation from the driver after having cleaned previous installation and having unplugged the printer.
Same problem re-occured
Here the log containing the error
EDC): _PostProgressMessage hWnd=0x60206 msg=1125, param=13074
[11-19-2009 8:22:39:391]- LOG(EDC): Preinstalling inf C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:39:391]- LOG(820): IDLCProgressDlg:nCurrentProgressMsg()
[11-19-2009 8:22:39:391]- LOG(820): msg=Preinstalling the driver files ...
[11-19-2009 8:22:41:216]- LOG(EDC): SetupCopyOEMInf failed gle=2
[11-19-2009 8:22:41:216]- LOG(EDC): PreInstallDriverFiles()
[11-19-2009 8:22:41:216]- LOG(EDC): _PreInstallDriverFiles()
[11-19-2009 8:22:41:216]- LOG(EDC): inf:C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:42:761]- LOG(EDC): DriverPackagePreinstall = -536870141, flags=0x14
[11-19-2009 8:22:42:761]- LOG(EDC): ===>>> ERROR (gle=-2146499837, 0xe0000303): Msg: (null) Context: DriverPackagePreinstall failed
[11-19-2009 8:22:43:775]- LOG(EDC): _PreInstallDriverFiles()
[11-19-2009 8:22:43:775]- LOG(EDC): inf:C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:45:194]- LOG(EDC): DriverPackagePreinstall = -536870141, flags=0x14
[11-19-2009 8:22:45:194]- LOG(EDC): ===>>> ERROR (gle=-2146499837, 0xe0000303): Msg: (null) Context: DriverPackagePreinstall failed
[11-19-2009 8:22:45:194]- LOG(EDC): Diffx Preinstall FAILED, trying SetupCopyOEMInf: C:\Users\Admin\AppData\Local\Temp\7zS58EC\HPLJM1005.INF
[11-19-2009 8:22:45:194]- LOG(EDC): ProcessFailure(3) NEXT=0, BACK=1, CANCELED=2, FAILED=3
[11-19-2009 8:22:45:194]- LOG(EDC): _PostProgressMessage hWnd=0x60206 msg=1129, param=0
[11-19-2009 8:22:45:210]- LOG(EDC): InstallSequencer() step = 4
[11-19-2009 8:22:45:210]- LOG(820): IDLCProgressDlg:nStopCurrentProgress()
[11-19-2009 8:22:45:210]- LOG(EDC): --- PreInstallStep ---
After that he retries to install the driver, but inside the previous install directory.

Driver for HP LaserJet M1005 MFP for Windows 7

Scaner not working

Hello Nishant_121,
Welcome to the HP Support Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Enabling the printing function of your HP Laserjet M1005 printer

If you wonder how to install the printing function of your HP Laserjet M1005 printer, here is listed a bullet list of the actions. This has just been tested out thanks to the Support team from Germany
Go to the page http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1 839459&lang=en&cc=us&prodTypeId=18972&prodSeriesId=1839458&taskId=135 and select the link Mac OS X; download the link "HP LaserJet M1005 MFP Mac OS X Full Software Solution"
Use the opportunity to update your printer firmware by selecting the link "Printer Firmware Update"
Shutdown your Mac and start up in the safe boot mode (should be the combined keyboard shift and power on/off - refer to the Apple web site for details)
Run the downloaded SW package listed in the step 1
Go and select under system settings printer and fax, follow the step-by-step instructions to have a printer installed
Shutdown your Mac and start up again in the safe boot mode
Connect your printer and the printer SW installation message shoud pop up requesting you to install it
SW download process should appear and run
Be aware that just the printing function will be available - no scanning function so far
For those who may be interested in knowing why safe boot mode: it is likelz that my anti-virus SW Kaspersky denied the installation.
Continue to enjoy your HP Laserjet M1005 printer

"For those who may be interested in knowing why safe boot mode: it is likelz that my anti-virus SW Kaspersky denied the installation."
You should read this:
http://www.reedcorner.net/mmg-antivirus/

HT3669 HP laserjet m1005 Driver not visible

I have updated all the HP Driver Softwares available through the ASU but I didnt see the driver of HP LaseJet M1005 MFP even though its listed in the supported printer's list.
I even downloaded the available driver from the HP website but still was unable to use the printer.
What use is a laptop if it can't even print documents.!!!
Please help!!

I found the following at HP Support on the web:
Products with HP driver for OS X 10.7 only at www.hp.com:
Some supported products do NOT have an update available through Apple Software Update (ASU). These models are only supported with a .dmg driver download available from www.hp.com. If you have one of the following products, go to www.hp.com/go/support to obtain the full feature Lion download.
HP Color LaserJet CM1015/CM1017 Multifunction Printer series
HP Color LaserJet CM1312 Multifunction Printer series
HP Color LaserJet CM2320 Multifunction Printer series
HP LaserJet Pro CP1020/CP1025 Printer series
HP LaserJet Pro M1005 Multifunction Printer series
HP LaserJet Pro M1130, M1132, M1134, and M1136 Multifunction Printer series
HP LaserJet Pro M1210, M1212, M1213, M1214, M1216, M1217, and M1219 Multifunction Printer series
HP LaserJet Pro M1522, M1536, and M2727 Multifunction Printer series
HP LaserJet P1100 and P1102 Printer series
HP LaserJet Professional P1600 and P1606 Printer series
Just follow the directions above to enable printing with your printer.
Hope this helps

Unable to use HP M1005 MFP Scanner

So, I am a newbie to this, But I have recently Bought an HP M1005 MFP printer-Scanner. Though it works as a printer flawlessly, I am unable to scan documents. Can anyone suggest what I should do?

Hey shally gupta,
Thanks for using Apple Support Communities.
This article shows the complete list of printers and scanners that are supported by Software Update. Scanner software is not provided by software update.
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669#HP
HP LaserJet M1005
1.4.0
P
Have a nice day,
Mario

I have hp laser jet m1005 mfp can we scan document pdf format?

Dear Sirs,
I am useing hp laser jet m1005 mfp, can i scan and make PDF document insted of JPEG etc.
Kaushik
kaushik

Hello Kaushik9
The product you have is a commercial printer. I suggest posting in the HP Business Support forum for a better chance at finding an answer.
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

HP AiO remote doesn't recognize 3rd party toner as compatible in LaserJet M1217nfw MFP

Hi,
I have a HP Envy 17 running Windows 8.1, a MacBook Air, an iPhone and a HP LaserJet M1217nfw MFP. I recently replaced the toner with a 3rd party replacement cartridge and while the printer does give me a "supply memory error" I am still able to print just fine from the Mac and my phone. I am unable however to print from my Envy. The HP All-in-One Remote app in Windows 8 gives me an "incompatible cartridge" message and says there are no solutions availble. Is there a work-around to this?
I am not very good at Windows 8....
Thanks

Hi Thaddeus,
Although the printer may resoponse to some commands, a supply memory error is an error state about the used cartridge.
Due the error message on the screen the HP AIO Remote recognize the cartridge as incompatible, that cannot be bypassed
with any settings, resolving the issue which cause the error message is the only key to resolve a such.
If the HP AiO Remote fails to print in such condition the only solution is to fully resolve the condition by following the steps listed in my previous post.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can't install HP Color LaserJet CM1312nfi MFP at notebook HP Pavilion

I bought new notebook HP Pavilion 13-a051sr with Windows 8.1 (x64) onboard.
I'm trying to install HP Scan.
While installing all-in-one HP Color LaserJet CM1312nfi MFP using "CM1312series-win7-full-solution-AM-EMEA1-v5.1.exe" can not get after the dialog window "Locating the printer". Printer could not be found even if I write down printer' IP-address. The latest printer firmware is already installed. Firewall is disabled, antivirus is closed.
I installed printer without any problems using it IP-address. What can I do in order to install scanner module?

HP Print Drivers

HP laserjet CP3530 MFP, I can't get this baby to scan to a server or workstation folder

Hey Guys(and ladies),
I have a HP laserjet CM3539 MFP and when I try to set up the scan to folder option, and I click the scan wizard, it asks for me to install the CD that came with this printer. I purchased it on ebay and they don't have a CD for it. I tried downloading that Park admin and it doesn't work in 32bit systems(using Windows 7 Ultimate 64)
Can someone walk me through this or can they copy the CD and I'll pay for shipping and all, I just need this scan to work so my employees can work saving docs on the server again.
Thank you,
Daivd-

Hello Davidshammer,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial LaserJet Forums.
I am aware that you have been already referred to look into posting in the commercial forums, it would be in your best interest to do so. This is HP's consumer forums, we do not have the training nor the knowledge to look into commercial products.
The support page for your product may be helpful in the meantime: HP Color LaserJet CM3530 Multifunction Printer series Support
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Hp laserjet m1132 mfp can't print from remote desktop

Hi, i've installed HP LASERJET M1132 MFP in my PC with windows 7 ultimate 32 bit and it works fine. But when i connect using remote dekstop with our Windows server 2008 r2 64 bit. its not printing. error "test page failed to print , would you like to view the print troubleshooter for assistance?" and it doesnt solved the problem.
please help

Thank you for your interest.
The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
I think I can close the topic.
(translated from Polish into English using Google translator)

HP LaserJet M1005 MFP

Similar Messages

Maybe you are looking for