HP LaserJet M1120n MFP, Win7-64bit, LAN

Hello, it is possible Hello, it is possible to print over LAN at printer HP LaserJet M1120n MFP from Windows 7 Professional 64 bit?
I tried to use HP Universal Print Driver PCL6 and PCL5. Printer was detected, but doesn't work. Document was sending from pool to printer and that was all.
On offcial support website is only driver for printing over USB.
Thanks
This question was solved.
View Solution.

Hello,
I see that you are having problems printing over the network to your printer. Could you provide more information around your network setup? For example, are the PC and the Printer connected to the same router... or the same network? Any detailed information about your network setup would be very helpful.
It looks like there is another support thread discussing the same or similar issue:
http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-LaserJet-M1120n-MFP-does-not-print-i...
Thanks,
I am an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Similar Messages

Default paper size scanning problem, LaserJet M1120n MFP

Hi, I just got a used LaserJet M1120n MFP. Installed the most up-to-date drivers form HP's website. Printing is fine over USB or LAN, however the WIA scanning driver defaults to paper size "Letter" and I can't scan A4 pages all the way. The bottom is always cut off and I get an unwanted strip besides the scanned document. Please, advise how to change the default paper size of the WIA driver to A4. I use Windows XP Pro. Looked everywhere but cannot find any settings that will allow me to change the default paper size. Any ideas?
I have been thinking, could default paper size be somehow be tied to system locale? My locale is European and all other device drivers do default to A4. I wonder how the WIA scanning driver chose to default to Letter size.
The TWAIN driver works fine (I can choose default paper size), though it is less intuitive than I expected. Too bad I can't use it over a LAN. Is there a way to calibrate the scanner for white as the background seems kind of dark?
Your suggestions and ideas are most appreciated. Thank you.

Thanks for the reply, Spencer. I have used Adobe Acrobat to scan by means of the WIA driver, but when I do so the paper size selection box is dimmed (inactive) and I can't choose any paper size (nor any is preselected). I have also used Win XP's native Scanner and Camera Wizzard; it doesn't even have a paper size setting. Then I have used it with Win 7's native Windows Fax and Scan; no paper size setting here either.
Here is a useful thread on the same issue from Adobe's forum: http://forums.adobe.com/thread/844549
Reading around the forums I came across several posts where people discussed the impossibiity to set paper size when scanning using the WIA driver. Their problem was a bit different, though. The WIA driver had locked to size 'Legal' while they needed to scan in size 'Letter'.
The WIA interface was developed by Microsoft and here is what they have to say about the issue:
http://msdn.microsoft.com/en-us/library/windows/hardware/ff548440%28v=vs.85%29.aspx
'Supported Scanner Paper Sizes
Although two WIA user interface components are able to display a list of page sizes to the user, there is no easy way for a WIA driver to know which page sizes a scanner supports.
Page Size in WIA Applications
There are no WIA properties that allow WIA drivers to report supported page sizes or that allow applications to specify page size directly. To communicate page size settings to a driver, an application must calculate the required size in dots per inch (dpi) and adjust the origin of the scan to conform with the registration requirements of the device.
Page Size in the Common Scanner Dialog and in the Scanner and Camera Wizard
Both the Common Scanner Dialog and the Scanner and Camera Wizard have a static table of supported page sizes in which each page size is described by its horizontal width and vertical height, both in increments of 0.001 inch. These page sizes are currently displayed only when the scanner is in document feeder mode.
The largest page size (by area) that a driver supports in page feed mode, as determined by the maximum bed size, is considered the default page size. Paper sizes that do not fit on the feeder or on the bed of the device are not offered to the user.' -- exactly my case!
Having tried the same WIA driver (developed by HP in this case) on several PC's running different WIndows OS and using non-US locale settings, I have came to the conclusion that HP may have hard coded the Letter paper size in the driver. I guess this works for North America but not in Europe where A4 is the standard size.
I guess I have to look into ways to get to that hard coded paper size setting in order to be able to make use of the driver. I don't even know if that will be possible but I'll keep on reading. Wish me luck

HP LaserJet M1120n MFP latest drivers for 64-bit Windows 7

I can't get my HP LaserJet M1120n MFP to work with 64-bit Windows 7. I downloaded and installed the drivers from HP site, file named ljM1120-hb-pnp-win64-el.exe and scan doesn't work, can only print Word documents. Downloaded and run check with the HP Doctor program you strongly recommend, but the ! report says I must download and install the most recent driver....well, it was what I thought was what I would get from HP site. Thanks for help!

Hi Lollo33,
The only 64 bit drivers available for your printer are the basic print and scan drivers which do not include any additional scan software. However, there is full solution driver support for Windows 7 32bit.
HP LaserJet Hostbased Print/Scan Plug and Play Drivers
Description:
The Plug and Play Bundle provides EZInstall to assist with installation for direct USB connections and offers basic print and scan for all-in-one and multifunction devices.
Details and specifications
File name:
ljM1120-hb-pnp-win64-en.exe [1/1, 14.14M]
System requirements:
No additional prerequisites
Released:
2009-10-11
Version:
20080808
Compatibility:
Microsoft Windows 7 (64-bit), Microsoft Windows XP x64, Microsoft Windows Vista (64-bit), Microsoft Windows Server 2003 64-Bit Edition
As an alternative, you may be able scan using MS Paint or the built-in Windows Fax and Scan software.
http://windows.microsoft.com/en-US/windows7/Scan-a-document-or-photo-with-Windows-Fax-and-Scan
Let me know if this helps.
Say "Thanks" by clicking the blue Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"; therefore, it's easier for others to find.
I am an HP employee.

Im using HP laserjet M1120N MFP printer and its required WIA driver.

hi,
im using HP laserjet M1120N MFP printer.
last time i dont have any issues to printer or scan, and lately i cant scan
and only able to print out.
its required me have WIA driver. anyone know how to fix its.
thanks

Hello zuzack97,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Scan Feature on Laserjet M1120n MFP

HI, I have a Laserjet M1120n MFP and have just recently installed windows 7 on my pc which formerly had xp. After installing the full driver pack from the hp website the printer works fine except for the scan to feature which behaves irratically. I have it set to scan to pdf which is how it was set before but when i go to scan multiple pages it sometimes comes out as just the first page, sometimes 2 instead of three and sometimes has two pages but they are both the first page.
Any ideas?
Thanks.

Hi,
The Printer is not compatible with Windows Server 2008, Windows Server 2003 is the only supported server OS.
You may find its specifications listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01118375&tmp_task=prodinfoCategory&cc=us&dlc=en...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

LaserJet M1120n MFP - Problems with printing over Wireless Network.

Hi. I have recently purchased a HP M1120n MFP printer. There are three wireless laptops (Vista, & XP Pro) that use this printer via a DrayTek Vigor 27000GE wireless router, then via cat 5 cable to Ethernet on printer.
All three laptops can print, but sometimes the print queue backs ups. The top print job will say "Printing" but it can say this for hours! Then if I delete the print job, it will say "Deleting" - but nothing happens. The only way to clear it is to reboot the laptop.
Firmware datecode is 20080228.
If I connect via USB cable directly to the printer it works correctly.
Any ideas to help resolve this frustrating problem?

The bottomline is that this printer has no way of connecting other than a straight USB connection. In order to make it wireless you have to have a device that will give it an network IP address. The printer by itself can not do this.
The only way to get this printer on a network is to buy a SEPERATE USB Printer Server. Or, buy a separate router, like I said, that has a USB connection on the back that will support printers.
You can not connect it the way you want as it stands right now.
However, call your ISP and have them set it up IF their Gateway device has a USB connection and really can support a printer. It is their issue.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP laserjet M1120n MFP printer not functioning properly with Lion

After installing this printer it will scan but with some flaws in the scanned image and it will not print at all.
All that it displays is that there is an error after attempting to print. I'm wondering if there is some special driver that I need?
The printer is about 4yrs old.
Thank you

Your printer should be supported in Lion. Check to make sure you have the latest drivers installed. Make sure the driver for it is selected in the printer list.
You might try deleting the printer and reading it once the latest driver and software is installed.

HP LaserJet M1120n MFP on windows 2008R2

I already successfully installed my printer for several worstations. I've stucked around installing driver for particular device on Windows 2008 R2. All required updates are installed. I tried to reboot my server. I recieve an error during the installation process. An See error mesage below:
Сигнатура проблемы:
Имя события проблемы:   BEX64
Имя приложения:   ProductInst.exe
Версия приложения:   1.0.5.3
Отметка времени приложения:   4ab9d4f4
Имя модуля с ошибкой:   ProductInst.exe
Версия модуля с ошибкой:   1.0.5.3
Отметка времени модуля с ошибкой:   4ab9d4f4
Смещение исключения:   000000000004750a
Код исключения:   c000000d
Данные исключения:   0000000000000000
Версия ОС:   6.1.7601.2.1.0.16.33
Код языка:   1049
Дополнительные сведения 1:   633f
Дополнительные сведения 2:   633f67d61a3759516e3ad278573b8915
Дополнительные сведения 3:   955c
Дополнительные сведения 4:   955c679802f6c72f18586613ec6aaa15
Ознакомьтесь с заявлением о конфиденциальности в Интернете:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0419
Если заявление о конфиденциальности в Интернете недоступно, ознакомьтесь с его локальным вариантом:
C:\Windows\system32\ru-RU\erofflps.txt

Hi,
The Printer is not compatible with Windows Server 2008, Windows Server 2003 is the only supported server OS.
You may find its specifications listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01118375&tmp_task=prodinfoCategory&cc=us&dlc=en...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp laserjet m1132 mfp can't print from remote desktop

Hi, i've installed HP LASERJET M1132 MFP in my PC with windows 7 ultimate 32 bit and it works fine. But when i connect using remote dekstop with our Windows server 2008 r2 64 bit. its not printing. error "test page failed to print , would you like to view the print troubleshooter for assistance?" and it doesnt solved the problem.
please help

Thank you for your interest.
The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
I think I can close the topic.
(translated from Polish into English using Google translator)

HP LaserJet M1132 MFP does not print from a remote desktop

Hi,
I have a HP LaserJet M1132 MFP (product number CE847A) connected to a PC (MS Windows XP Home Edition + SP3) via USB. There is no problem with the printer. However, when the connection using Remote Desktop (it's set to use local facilities and resources, or in my case, printers, and serial ports) to the server (MS Windows Server 2008 R2), I can not even print a test page from a remote desktop.
Error message: "Print a test page failed. Do you want to display a tool to solve problems with printing to get help?"
But it does not lead to nowhere, as expected is access to the internet, and I have not it from a MS Windows Server 2008 R2.
The same error is for the HP LaserJet M1120n MFP.
I have installed on my PC other printer - old OKI ML321 (needle) connected to a PC using LPT cable and network printer Konica Minolta 1690MF (in another room). In both of these printers can easily print a test page from a remote desktop.
Please help me.
This question was solved.
View Solution.

Thank you for your interest.
The situation is a bit different than the picture. Windows Server 2008 R2 is available through the WAN. LAN is plugged into the PC-1, PC-2 and Konica Minolta printer. HP LaserJet M1120n MFP is connected via USB to the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC-1 has access to Konica Minolta printer via the LAN. PC-2 also has access to Konica Minolta printer via the LAN. PC-2 is also available for PC-1 HP and OKI.
It seems to me that I found the explanation for the printing problems - some of "my" printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:
http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800d-2d9f-1f0c-225cabd6838e&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8dbb-9e95-11dc-3575d569acc2&bCatID=128...
http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8d51-dcbb-7664cbc17a89&bCatID=128...
I think I can close the topic.
(translated from Polish into English using Google translator)

HP COLOR LASERJET CM2320 MFP DO NOT SETUP IT ON THE WIN7 64BIT USİNG IT ON THE NETWORK

my hp color laserjet 2320 mfp is not possible to setup it on the my win7 64bits when ı want use it like network printer.But since 2 weeks ago ı can see it on the network when ı want to install it using orginal hp product sotware.When installing the software is not found by software on the network.Why ı am not able reinstall it again.But so intresting it is possible install it using win7 64bits drivers.İf ı install it by these drivers ı can not use all funtions of the printer.I want use orginal software for installing it on my computer and to use all faciliies.I tried all possibilities for windows part .Delete all drivers from pc,registry part but no solution. ı would like find a solution.ıs it possible any problem windows part if it is. what kind of problem and solution.Please give me a help...

HI DeePure,
Print out the supplies status page, and let me know if all the colors print correctly?
Do you have an extra set of cartridges we can use to troubleshoot with?
Print the supplies status page
Follow these steps to print out the supplies status page from your printer.
On the Printer’s control panel, press the Setup button.
Press the down arrow to highlight Reports , and then press OK .
Press the down arrow to highlight Supplies Status Page , and then press OK .
Figure 1: Supplies Status Page
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

LaserJet M1120 MFP + Windows 8.1 64bit - cannot find drivers for scanner

I have a new notebook with Windows 8.1 64bit and a LaserJet M1120 MFP multifunctional. For printing is OK, it found plug and play driver and I am able to print. For scanning, I couldnt find drivers. Please help! Thanks...

Hello Gabitza,
Welcome to the HP Forums!
I understand you're unable to find a scanning driver for the Laserjet M1120 MFP. I will do my best to assist you! There isn't a full feature software available, just a plug and play driver. As a workaround, you can use another program to scan a document.
Please follow this HP document on How to Scan: Windows 8. Click on how to scan without HP software and there is four programs to try. Let me know if you are able to scan a document.
Have a great a night!
I worked on behalf of HP.

Unable to UNINSTALL "hp Color LaserJet CM1312 MFP Series" from Windows7 64bit OS on HP-8730w

i am unable to UNINSTALL the "hp Color LaserJet CM1312 MFP Series" from Windows7 64bit OS installed on HP Notebook 8730w Mobile Workstation.
If i click the uninstall button using the original printer driver CD, nothing happens; no error messages either.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Connecting to HP LaserJet 5100 printer on Win7, 32bit PC from a Win7, 64bit PC

I'm having a heck a time trying to add a printer that is on another machine. The printer is an HP LaserJet5100 and is connected to a Win7, 32bit pc using a pcl6 driver. The PC I want to add this other printer to is a Win7, 64bit. I went to HP Drivers and downloaded a HP LaserJet 5100 pcl6 driver for Win7, 64bit, and ran it, using traditional mode, on the PC that I'm trying to install a printer to. I chose "Add a network Printer..." and then pick the printer that I want to connect to. I get a Windows Printer Installation pop up that says "Checking for Windows Update. This might take a while..." and then get another popup that says "No driver found". I then get another pop up to locate the driver. Browsing to the driver files that I just download, I find eleven files of the .inf file type, but none of them are the right file. Any help would be greatly appreciated.

Hello Cinci-Hal,
Welcome back to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

2101nw print server (and LaserJet M1132 MFP) – installation problems on Windows 7 (64bit)

For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
Then, I went on with the reinstallation of HP software, for the print server and the printer.
And it was a disaster.
After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
You can imagine my disappointment.
Now, hopefully, I write in this forum to ask for help. My request is twofold:
1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
For this purpose, can you please give me your suggestions ?
2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
I’m asking because I found these pages which seems to give some hope, but I’m not so sure ... :
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
Many thanks in advance for your help
Simone

For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
Then, I went on with the reinstallation of HP software, for the print server and the printer.
And it was a disaster.
After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
You can imagine my disappointment.
Now, hopefully, I write in this forum to ask for help. My request is twofold:
1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
For this purpose, can you please give me your suggestions ?
2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
I’m asking because I found these pages which seems to give some hope, but I’m not so sure ... :
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
Many thanks in advance for your help
Simone

HP LaserJet M1120n MFP, Win7-64bit, LAN

Similar Messages

Maybe you are looking for