HP LaserJet M1120n Multifunction Printer, control panel display

Hi,
Yesterday here was an electrisity cut. After that all devices worked normally, except the printer. Control panel display of the printer was out of function and control panel buttons didn't work.
I turned the printer off and waited some time. After that I tried to restart the printer. I heard that the printer started, but the display didn't work though, even I waited couple of hours . How could I solve this problem and can you help me?
BR Vesa

Hi @Vesa57 ,
I see that the display isn't working on the printer since you had a power outage. I will certainly do my best to help you.
Can you still print to the printer?
Make sure there is no damage on the power cord and that it is connected directly to a wall outlet.
The printer shouldn't be exposed to any electric or magnetic field.
Try another power cord, you can use a monitor power cord to test it. Just to rule that out.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 30-60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Try another wall outlet in another room, on another breaker. Just to make sure that isn't causing the issue.
Please call our technical support at 800-474-6836 if the issue continues. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

HP LaserJet m1120n multifunction printer scan to network

Hello,
I have an issue making the scan to network function to work between HP LaserJet m1120n multifunction printer and Snow Leopard.
Printing is working fine and it was added via IP.
I checked the HP site for the instruction, but it does not work.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en #N441 the scanner does not show up.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3 447597&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=3447595 does not show scanner driver for 10.6
anyone using the same printer/scanner that could give me tips to get this working? thank you in advance.

my setup is different.
the printer is connected via ethernet to an airport extreme and printing is fine.HP Director/Scan is not detecting the printer over the network.
i saw this one hp site(i forgot yhe link and i couldn't find it again) telling us to include network devices in preview and the scanner does not show on the options.

Drivers forHP LaserJet M1120n Multifunction Printer

I'm unable to locate the download button for HP LaserJet M1120n Multifunction Printer at the HP Software and Driver page and hence not able to download the driver. Please help...thx

Hi,The software for your device is not available for download from HP, it is available via Apple Software Update. Print drivers can be installed by following these steps:http://support.hp.com/us-en/document/c04510394/ I afraid that scanning is no longer supported on any of the latest OS X version, however you may try the 3rd party Twain Sane project which seems to support the M1120 and may provide you scan capabilities on Yosemite:http://www.ellert.se/twain-sane/ Regards,Shlomi

HP LaserJet Enterprise 500 color MFP M575 control panel display

HP LaserJet 500 color MFP M575 have no Display. and is not anymore possible access any function. What is the problem behind that ?How can we solve this issue ? is it the problem with the control panel display or the logic board ? there is no dim memmory instaled in the system .

Good day,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I am having hp 4500 g510h printer, in control panel display it is showing "redial in 0" if

i am having hp 4500 g510h printer, in control panel display it is showing "redial in 0" if we press it will show busy in the display panel.
This question was solved.
View Solution.

This was quite a pain to solve, and as my client's printer was out of warranty HP telephone support wanted at least $20 to even try to fix it.
Anyway, I was able to fix it myself by hard resetting the printer:
1) unplug the power cord
2) hold buttons '#' and '6' as you plug it back on
3) while still holding, power on the printer
4) after a few seconds, it will show semi NVM reset or something like that, and start the factory default setup (pick language, align cartridges, etc.)
You should be able to access printer functions again as usual after that.

Officejet pro 8500a control panel display is all white. Any fixes? Can it be repaired?

Control panel display is white. Can't see any of the functions. I know there has been alot of problems with this printer. Has anyone gotten this display panel repaired or replaced? Any help would be very appreciated thanks!!!

Hi ellis056
I'd like to help you with the display screen. There may be a firmware update for the printer, please select your printer from the list below to download and see if there is an update available.
HP Officejet Pro 8500A e-All-in-One Printer - A910a
HP Officejet Pro 8500A Plus e-All-in-One Printer - A910g and A910n
How Do I Find My Model Number or Product Number?
Also, do you have the printer connected to a wall outlet for power or a surge protector?
Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see,
ISSUE:
Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
This is not limited to Laserjet printers.
If you have the printer connected directly to a wall outlet, you can try doing Resetting the Printer.
Please let me know if either of these solutions resolve the issue, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

J6480 LCD Control Panel Display Malfunction

My All-In-One J6480 Officejet is on its last legs. In 2010, I added a Win 7 based laptop to my wireless home network shared with a Vista based 32 bit OS. That created some lasting conflicts that still result in not being able to scan from the Win 7 laptop. I can live with that, but recently the control panel display began to fade out across horizontal bar areas. Now, the panel is almost completely barren of all display characters. Messages, options, etc. are all invisible. If anyone has been able to correct a similar situation, please help.

Hi , Welcome to the HP Forums! I understand that the panel is almost completely barren of all display characters, on your HP Officejet J6480. I am happy to help! Please take a look through this guide, The HP Printer Won't Turn On or Respond When the Power Button is Pressed, that deals with power related issues. Hope this guide helps!

C4780, The Control Panel Display Freezes on the HP Logo when Connecting to a Wireless Network

this is my second c4780 i have tried to connect wirelessly to my imac, every time i get to the wireless part of the set up process my network is the strongest in the list but it cant seem to connect and when i go to retry it then it tells me the device cannot be found and that i need to connect it via usb when it already is connected and then the Control Panel Display Freezes on the HP Logo, and i cant get it unfrozen. I would really like this printer to work wirelessly so i don't have to go back to the apple store again and return it. Any help is greatly appreciated, thanks

Worked great!!!!!!!!!!!!!!!!!!!! thank you so much i was about ready to throw it out the window

HP 6500A - Can't get into printer "control panel software" to check ink level, etc.

First let me apologize... I don't know what the correct name is for the software that starts up when you use the printer icon that was installed on my computer's desktop when I installed the printer. I am calling it the "control panel software" for want of a better name.
My printer was setup to work wirelessly on my wireless network and was working fine. The "control panel software" worked fine when I click on the icon on my desktop and I was able to check the ink levels, etc.
I just got a new router and so I had to reconfigure my printer to use my new wireless network settings. It wasn't working properly, so I decided to uninstall and reinstall the HP software for the printer. As part of this it put a new icon on my computer's desktop for accessing the printer "control panel software", another new icon for the scan function, and another for the ePrint Service.
The printer works fine... I can print and scan properly. It successfully connected to my new wireless network and I thought all was well. However, this is not the case.
What is weird is that the "control panel software" icon doesn't take me to the control panel functions any more. When I click on it it takes me back through the process of setting up the printer connection (wireless, wired, USB) again. If I go through that again it tells me everything is installed and lets me set the default printer again and then asks me to register again. So... I think I'm done, but then if I click on the icon again, it goes through this same process again.
Is there any way to stop this endless connection setup and just get to the "control panel software"?
Any help appreciated.
Thanks,
Bill

What operating system? I recommend not using the software CD as it may be out of date. Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Either I can't find my printer control panel or it does not have the scan icon

I have an HP Deskjet 3055A J611 Series, which is running on Windows 7.
It is important that I scan several pages and place them all in one file. I understand that this requires that I access the printer control panel. I have accessed the printer through the icon "devices and printers", and the panel that comes up have only the following 4 items: am unable to scan from my printer control panel: HP Printer Assistant; See What's Printing; Set Preferences; Customize your Printer. Perhaps this is not the control panel? If not, then I do not know how to access the control panel. On the other hand, if this is the control panel, then it does not have all of the icons and I do not know why. Could you please help? If I can't get this straightened out, I will need to find another printer that can easily scan documents with several pages onto one file.
Thank you in advance,
Maria ROBLE
Language-incontext, FRANCE

Welcome to the forums @CLEANA , Maria
I understand you are not seeing the options within the Printer Assistant to change the scan options to allow you to save a multi-page scan as one file.
I would first suggest installing the Full Feature Driver to install the scanning options.
Click here to download: HP Deskjet Full Feature Software and Drivers
Afterwards, you should see the printer software on your Desktop, open it up, click on Scan a Document or Photo, select the "Advance" option and you should see this box to check mark to select:
I hope that helps!
Happy Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP LaserJet M1319f Multifunction Printer

HP laserjet M1319f multifunction printer---------Where do I find the right drivers for this printer, for some reason my computer keeps kicking it out and i have to keep re installing it. it is not recognized when i plug it in.
windows 8-64 bit?

Hi @LR2014 ,
I see that you are having issues with the drivers and you would like the proper ones installed. I would like to help.
The only drivers available from HP are the Hostbased Plug and Play Drivers. Did you download and install those drivers or are you using the Windows preinstalled drivers? HP LaserJet Hostbased Print/Scan Plug and Play Drivers.
If you are using the downloaded drivers, check the Devices and Printers window to see if the printer name is listed correctly and not showing the Windows Classic Driver.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Im using HP laserjet M1120N MFP printer and its required WIA driver.

hi,
im using HP laserjet M1120N MFP printer.
last time i dont have any issues to printer or scan, and lately i cant scan
and only able to print out.
its required me have WIA driver. anyone know how to fix its.
thanks

Hello zuzack97,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Where is the printer control panel so i can set up for mobile printing

I am trying to set up for mobile printing and have come to the instruction point where they say to push a certain icon on the printer control panel on my 1102w printer and I have no idea whether this is something on my actual printer or on my computer?

Hi,
The printer control panel is on the printer, it can be LCD screen or just buttons.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Windows 7 Control Panel Display and Intel Graphics Media Control Panel Constantly

I have a Nvidia NVS 5200 M running with Intel 4000 and Windows 7 on a Lenovo T430S.
Whenever I load the Control Panel -> Display settings, I can see options just fine, but I click on any of the drop down menus and they appear for a second, then immediately disappear (fast enough that I can't change settings).
There's a similar problem when I look in the Intel Graphics Media Control Panel. It constantly appears to be "loading" - the mouse icon turns into a little blue circle off an on, continuously. Similar thing with the settings, too - they appear and let me change them, but immediately return to the original setting. I can change them if I act SUPER quickly to make the change then click Apply. But 99/100 I'm not fast enough.
All drivers are up to date. I have no idea what to do (reinstall or uninstall this Intel Graphics control panel? How? Or somehow change a setting on my graphics card).
Please help!

Try uninstalling both drivers, then reinstalling them. Sometimes a clean driver update works better.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Printer control panel is not responsive.

touch printer control panel is not responsive. The power button is responsive as well as the nfc button. Need help please

Hey , Welcome to the HP Support Forum. I see that your HP ENVY 7640 e-All-in-One Printer's front panel is not functioning. I would like to assist you with this. Have you tried a hard reset? 1. Ensure your printer is powered on.
2. Disconnect the power cord from the rear of the printer.
3. Wait 60 seconds.
4. Reconnect the power cord to the rear of the printer.
5. Press the Power button to turn on the printer (if it doesn't automatically reboot). There are more advanced reset steps available but they're no good to you if the printer won't allow for you to navigate through the touch screen menus. If this basic tip restores front panel functionality let me know and I'll private message you the semi-full reset steps. Otherwise I recommend you reach out to our tech support team. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. Thanks for posting in the HP Support Forum. Have a great day!

HP LaserJet M1120n Multifunction Printer, control panel display

Similar Messages

Maybe you are looking for