HP LaserJet m1120n multifunction printer scan to network

Hello,
I have an issue making the scan to network function to work between HP LaserJet m1120n multifunction printer and Snow Leopard.
Printing is working fine and it was added via IP.
I checked the HP site for the instruction, but it does not work.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en #N441 the scanner does not show up.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3 447597&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=3447595 does not show scanner driver for 10.6
anyone using the same printer/scanner that could give me tips to get this working? thank you in advance.

my setup is different.
the printer is connected via ethernet to an airport extreme and printing is fine.HP Director/Scan is not detecting the printer over the network.
i saw this one hp site(i forgot yhe link and i couldn't find it again) telling us to include network devices in preview and the scanner does not show on the options.

Similar Messages

  • Drivers forHP LaserJet M1120n Multifunction Printer

    I'm unable to locate the download button for HP LaserJet M1120n Multifunction Printer at the HP Software and Driver page and hence not able to download the driver. Please help...thx

    Hi,The software for your device is not available for download from HP, it is available via Apple Software Update. Print drivers can be installed by following these steps:http://support.hp.com/us-en/document/c04510394/ I afraid that scanning is no longer supported on any of the latest OS X version, however you may try the 3rd party Twain Sane project which seems to support the M1120 and may provide you scan capabilities on Yosemite:http://www.ellert.se/twain-sane/ Regards,Shlomi

  • HP LaserJet M1120n Multifunction Printer, control panel display

    Hi,
    Yesterday here was an electrisity cut. After that all devices worked normally, except the printer. Control panel display of the printer was out of function and control panel buttons  didn't work.
    I turned  the printer off and waited some time. After that I tried to restart the printer. I heard that the printer started, but the display didn't work though, even I waited couple of hours . How could I solve this problem and can you help me?
    BR Vesa

    Hi @Vesa57 ,
    I see that the display isn't working on the printer since you had a power outage. I will certainly do my best to help you.
    Can you still print to the printer?
    Make sure there is no damage on the power cord and that it is connected directly to a wall outlet.
    The printer shouldn't be exposed to any electric or magnetic field.
    Try another power cord, you can use a monitor power cord to test it. Just to rule that out.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 30-60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    Try another wall outlet in another room, on another breaker. Just to make sure that isn't causing the issue.
    Please call our technical support at 800-474-6836 if the issue continues. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Laserjet M1120 Multifunction CANNOT SCAN in OS 10.8.2

    I am using a brand new macbook air and a HP laserjet M1120 multifunction printer. I upgraded to OS 10.8.2 out of the box, and the printer was very easy to install, but the scan functionality does not work at all. 
    Under no menu, program, sub-menu, does OS 10.8.2 recognize that the M1120 is not only a printer, but also a scanner.  Its as if M1120 went from being a multifunction to a monofunction laser printer.
    The scan functionality works just fine with another mac computer running 10.7 so I know its an issue with 10.8.2 compability.
    Been relentlessly looking for solutions on the internet (apparently i am not the only one having issues scanning with HP devices) and 10.8.2 but couldnt find a solution yet.
    Anyone have any suggestions? - also the printer was bought from an Apple store just a few years ago so would be furious if I cant get it to work. Apart from this issue with 10.8.2, the printer works very well.
    Many thanks in advance.
    This question was solved.
    View Solution.

    Hi,
    I am sorry to inform you, scanning is no longer supported for your product since Mac OS X v10.6 or with any newer OS:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02925114#A2
    You may check the 3rd party Twain-Sane project which list your pritner as supported:
    http://www.sane-project.org/
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP LaserJet M1319f Multifunction Printer

     HP laserjet M1319f multifunction printer---------Where do I find the right drivers for this printer, for some reason my computer keeps kicking it out and i have to keep re installing it. it is not recognized when i plug it in.
    windows 8-64 bit?

    Hi @LR2014 ,
    I see that you are having issues with the drivers and you would like the proper ones installed. I would like to help.
    The only drivers available from HP are the Hostbased Plug and Play Drivers. Did you download and install those drivers or are you using the Windows preinstalled drivers? HP LaserJet Hostbased Print/Scan Plug and Play Drivers.
    If you are using the downloaded drivers, check the Devices and Printers window to see if the printer name is listed correctly and not showing the Windows Classic Driver.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Im using HP laserjet M1120N MFP printer and its required WIA driver.

    hi, 
    im using HP laserjet M1120N MFP printer.
    last time i dont have any issues to printer or scan, and lately i cant scan
    and only able to print out.
    its required me have WIA driver. anyone know how to fix its.
    thanks

    Hello zuzack97,
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HP LaserJet Pro M1217nfw Multifunction Printer scaner driver problem in windows 7

    I have a HP LaserJet Pro M1217nfw Multifunction Printer. Printer is ok but Scaner has problem in Windows 7 scaner driver is deleted when i try to scan it show the error " Scaner not communicate " I have to reinstall driver after few minitus again same problem . Pls advise me what is the best solution for that

    Hi KrunalPatel,
    I'll paste a link to a troubleshooting document below - from what I've read, it has the best chance at fixing your scanner errors, as it has the most steps to try
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02917811
    Please let me know how it goes
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • HP LaserJet P1505n stops printing and blocks network interface

    I have been using my P1505n for over two years without any problem. But it suddenly stopped printing. The scenario is as follows:
    1. The P1505n is connected to a wired home network with reserved IP address in the DHCP server.
    2. The P1505n is used from Ubuntu 10.4, 11.4 , Windows XP and Windows 7 without any previous problems.
    3. The last partial successful print job stopped in the middle of a page leaving the rest blank: no paper jam.
    4. I have reset the printer several times: turn off + press Cancel & Go + turn on while holding the two buttons down.
    5. The first reset was successful: the toner level going from 40 to 100%. The next ones may have been successfull too.
    6. After each reset and also after each power-on, I can ping and access the embedded web server.
    7. Whenever I send a print job, the print queue on the computer (all OS behave identically) says "printing" and stops. I can cancel/remove the jobs from Ubuntu.
    8. After the printer receives the print job, it silently blocks the network interface (no ping nor web) and doesn't print anything. No movementsm no LED blinking either: just nothing happens.
    What is the reason for this problem? And how do I solve it?

    Hi firedude007,
    Welcome to the HP Forums!
    I see that your HP Laserjet P1102w stops printing files from your Mac but not on Windows, and I am happy to help!
    For further assistance, I will need to know the following information:
    The version number of the Mac Operating System. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies by itself.
    In the meantime, I would try the following:
    Reset the printing system. Mac OS X: How to reset the printing system.
    Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
    Hope to hear from you, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Success! How to Print/Scan on network (Win7 & HP 2710)

    OK, I can't say that this will work for everyone considering how many different setups there are out there, but I was able to Print and Scan over my network using the HP software for my Photosmart 2710.  This works about 95% of the way.  The extra 5% I'll explain:
    1) I keep getting a "device driver failed to install" error on restarting the PC.  This only happens on a PC restart and you can silence the message if you want (although it may slience any other hardware install messages with it).  The funny thing is that the printer/scanner still work perfectly fine even with error.
    2) It seems Win7 programs still can't "see" the scanner and it appears to be "half installed"... I'm able to view the scanner properties, but when I select "Scan Profiles" I get an error saying "no scaners are insalled.  However, the HP software can see and use the scanner AND you can press the "scan" button on the printer and get the scanner to load the HP software to capture the scan.
    3) Final Notes:  Printing seems to work perfectly from any program in Win7, and I'm unable to test the Fax since I'm not setup for that.
    4) Lastly, my "UAC" was turned off so I'm unware of any extra "are you sure?" messages you may get.
    ~~~~~How to get the HP Photosmart 2710 to Print, Scan... and maybe Fax over the network with Windows 7~~~~~
    OS: Windows 7 Ultimate 64-bit (Fresh install -- Installed Win7 then Installed the HP software to ensure no conflicts)
    Network Connection: Wired through a Belkin N+ router (did not use the 2710's wifi)
    Status: HP Digital Monitor can see and track the printer and scanner, some scanning options may not work if your not using the HP software.
    How to:
    1) Download the latest "HP Officejet and Photosmart Full Feature Software and Drivers" package (about 164MB large)" for Windows VISTA (32bit & 64bit) and the 2710 and save to your desktop.  Of course you should double check to ensure there's not a new Windows 7 software package available... just in case HP decided to help us out.  If there is, download that instead and ingore the rest of this post. ;-)
    2) Now goto "Start", "Control Panel", "System & Security", "Windows Firewall".  On the left panel select "Turn Windows Firewalll on or off".  Now ensure that both "Turn Off Windows Firewall" options are selected... save your settings.  ALSO, ensure you've turned off any other 3rd party firewalls that may be running "ZoneAlarm, Norton, Symantec, etc".  Finally, you may need to double check your router settings, although if the printer was working before Windows 7... chances are your network is fine.
    3) Now "Right Click" on the driver package sitting on your desktop and select "troubleshoot compatibility"... once Win7 gets done "detecting problems" make sure you select "Troubleshoot Program" (2nd option).  Now select "I don't see my problem listed" and click "Next".
    4) On the new screen select "Windows Vista (Service Pack 2) and click "Next" and then select "I don't see my problem listed"... finally, click the "Start the program..." button that appears.
    5) During the install slide the extra "program compatibility" window out of the way (leaving it open) and allow the installer to do it's work.  If everything goes to plan all the HP software should be installed and your printer should be detected on the network.  Once the installer is all done you can close out the extra window and if you so choose you can "save these settings for this program".
    6)  Restart the PC for good measure and you should be able to run the 2710... keep in mind that you'll probably get the "device driver failed to install" message, but again I've not seen any real problem with that message yet.
    7)  Now you can slow turn the windows firewall and any other 3rd party firewall settings back to what they were before.. keeping in mind that you might  have to give permission for the HP software to passthrough the firewalls you have running for it to work correctly.
    Hope this helps, until HP does.   I'll try to answer any questions to the best of my ability.  Sorry about any spelling errors.
    TK.
    Message Edited by teknomedic on 10-25-2009 07:29 PM
    Message Edited by teknomedic on 10-25-2009 07:30 PM

    Thank you for the above. It got me most of the way, but I had to do a few more bits to get the drivers to work correctly on Windows 7 Professional.
    * Install windows 7
    * Install anti virus/spam/firewall solution
    * Install the 'basic' inbuilt windows 7 printer driver for the HP 2710. Then check it will print, so know printer works
    * Turn off the firewall used on windows 7
    * Installs the Vista drivers for the HP 2710, under vista service pack 2 compatibility mode, as above
    * Download and install the Vista Reboot patch for Windows 7 upgrade (I think this stops the driver message at startup)
    * At this point the printer worked, but scanner did not.
    * Download and install the Windows 7 c309a All in 1 Photosmart software. Ignore when it looks for the c309a printer, and say complete the install. Basically this looks to be a newer photosmart based on the same software solution as the original HP2710. As it over-installs the 2710 software & drivers, it automatically fixes the bits that the 2710 install did not get right.
    * Turn on your firewall
    * Reboot the windows 7 PC
    * On startup allow the HP software to access the different network bits (say Yes) to can HPxxxx access networks etc..
    * Update Win7 with microsoft updates
    * Reboot PC
    Now after a few reboots the PC starts with a full patched Win 7 Operating System and the HP 2710 can Print, Scan, Fax as normal. Now I can use the HP2710 for another year until it breaks on me.

  • HP LASERJET M1136 MULTIFUNCTION PRINTER-----SCANNER NOT WORKING

    I HAVE RECENLTY PURCHASED HP LASERJET 1136 MFP. PRINTER IS WORKING FINE, BUT SCANNER IS NOT WORKING. HOWEVER PHOTOCOYING ACTION IS PERFECT. I GUESS THERE IS SOME ISSUE WITH THE DRIVER THING. CAN ANYONE PLEASE ASSIST ME FOR THIS???
    I HAVE PREVIOUSLY OWNED DESKJET SERIES, IN WHICH SCANNING AND PRINTING BOTH WERE WORKING FINE. 
    THANKS IN ADVANCE.

    Hi virendrapawar11, 
    Thank you for providing that information.
    Are you signed is a the Administrator of that computer?
    WIA drivers are part of Windows Operating System.
    Run this Microsoft Fit It Tool to see if it will resolve this issue.
    Diagnose and repair Windows File and Folder Problems automatically.
    I have provided this document, just to make sure these are the same ones you had checked.
    This document is to Check the Windows Image Acquisition (WIA) services.
    Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
    Disregard the title.
    Go to Solution three: Check the Windows Image Acquisition (WIA) services.
    Temporarily turn of the Antivirus Software and try scanning again.
    If the issue persists, download and try to repair the WIA drivers. If you don't feel comfortable about doing these steps, you can contact the computer manufacturer or Microsoft to resolve this WIA error.
    Back up the registry first.
    How to back up and restore the registry in Windows.
    Restore Default Startup Type for Windows Image Acquisition (WIA).
    Once the WIA is working properly agian on the computer, most likely you will have to uninstall and reinstall the printer software.
    Please let me know the results.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LASERJET 4000 PARALLEL PRINTER - CONNECT TO NETWORK

    I have a HP LaserJet 4000 printer with parallel interface currently connected to a desktop computer (WIN 7) via hardwire connection.  I have a wireless home network with another desktop and several laptops that I would like to be able to print to this printer, preferably via a wireless interface.  Does anyone know if this is possible and if so what it would take in additional hardware.  Even though this printer is no longer sold, in terms of usage it is still new, on the first toner cartridge!
    thanks

    Can you elaborate as I'm not that tech savvy but have a similar issue.  I have an HP Laserjet 2100M that I love as a "workhorse" printer.  I previously had this printer and an Epson Stylus Photo R800 "networked" so I could print to either from my MAC.  I recently moved from CT to FL and would like to replicate the network.  In retrospect, I think my network was facilitated by the HP printer being connected directly to an old PC which must have been like the printer server you described.  The old PC did not move to FL so I now have a MAC, a cable modem, an Airport router and a new PC laptop that I would like to connect.  Plus, I'm looking to buy an all-in-one to have the functionality that I had before the move (a separate fax machine and an HP printer-scanner-copier that also didn't make the move.  (As an aside, I was looking at the HP 8600 to buy and was concerned as it doesn't say it supports Windows 8 so I have to find something else.)  
    Sorry for beng so longwinded but I'm at a loss for which direction to go and recognize I'm in over my head but beleive what I want to do can be done (I just don't kow how)

  • HP laserjet M1120n MFP printer not functioning properly with Lion

    After installing this printer it will scan but with some flaws in the scanned image and it will not print at all.
    All that it displays is that there is an error after attempting to print. I'm wondering if there is some special driver that I need?
    The printer is about 4yrs old.
    Thank you

    Your printer should be supported in Lion. Check to make sure you have the latest drivers installed. Make sure the driver for it is selected in the printer list.
    You might try deleting the printer and reading it once the latest driver and software is installed.

  • HP Color LaserJet CM2320fxi Multifunction Printer (CC435A)

    i am interested about the named product....i am from india , west bengal , how should i buy this product vis hp shop....i am not interested to perchase it online....tell me the availibility of this model in my country.....what will be the price approx in Rs,....

    Hi,
    The 8.5 x 11 paper size should appear as Letter or US Letter.
    May you see such an option within the Paper Size option of the HP Scan software?
    The drivers are identical and are not seperated for different regions.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Problem setup scanning to network folder Officejet 8500 Wifi

    Hi,
    For hours now I'm trying to get my printer scanning to network folder to work, but it just won't!! The printer is connected wireless successful. 
    I'm in the setup menu (via the browser) -> Scan-Digital Filing ->Network Folder Configuration and filled in all the required fields:
    Network Path: \\192.168.178.15\E:\Dropbox\Scans HP printer OR \\Maarten\E:\Dropbox\Scans HP printer
    Also tried to a network shared folder: \\MAARTEN\Users\Maarten
    Username: [my Windows user name]
    Password: [my login password]
    But I still get the message: Username or password is incorrect. Make sure both user account and password are valid.
    Can someone please help me?! Thanks.
    Maarten
    This question was solved.
    View Solution.

    Hey Amazon62 ,
    I am looking into this scan to network folder setup issue for you, but in the mean time, have  you tried changing the password?
    The password may not be fitting the criteria needed for the printer, special character may be included for example. Try changing the password and or user name just as a test and let me know.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP LaserJet Pro CM1415fnw Color Multifunction Printer - CAN'T FIND ANY WIRELESS NETWORKS

    PRINTER: HP LaserJet Pro CM1415fnw Color Multifunction Printer
    OS: Windows 7
    OWNED: Over 2 years with no problems
    LOCATION/SET-UP: At my personal residence. All-in-one wireless router through cable company.
    ISSUE: All of a sudden, printer cannot find any wireless networks. Nothing has recently changed in my service provider or equipment. I know that the router and internet is not the problem because our 2 smart phones and three laptops still connect. I've triend manually setting up the network using SSID and Keyphrase but still nothing.
    HELP!
    This question was solved.
    View Solution.

    I would perform a hard reset by removing the power from the entire machienethrough the powercord for thirty seconds. Following that I would reconnect the printer to the wireless network and set a static IP/
    -Spencer 

Maybe you are looking for