HP LaserJet m1212nf goes offline in control panel after PC (windows 7) restart

Hello,
i have an issue that i couldn't find an answer on the internet.
We use HP LaserJet m1212nf multifunctional device in our company via networking. It has a static IP adress and the latest firmware. Also the software and drivers are the latest one. On Windows XP machines scanning and printing is working great, but also we have one PC with windows 7 pro 32bit edition. At first everything was fine, but from this monday the printer in control panel goes offline, so we can't print or scan for several days. Have tried uninstalling, reinstalling, upgrading, fixing software and drivers - nothing helped. Checked also HP servises - everything is running. Also no events found in windows event log.

Disable the firewalls or open ports on them?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    +For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
    This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
    *Settings I have Enabled*
    5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
    Use Wide Channels is recommended for 5 GHz operation.
    Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

  • When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

    When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

  • How do I install icloud control panel on my windows xp pc?

    How do I install icloud.control.panel on my Windows xp sp3 PC?

    You can't.  iCloud requires Vista SP2 or higher.

  • HT4759 How do I find the icloud control panel in a Windows 8 PC environment

    How do I find the icloud control panel in a Windows 8 PC environment

    Go to the Start screen, then click the iCloud tile.
    http://support.apple.com/kb/PH12803

  • QuickTime 7 not in Control Panel after installing QuickTime 7.6.6

    Hi, I need some assistance please
    I don't have QuickTime 7 in my Control Panel after installing QuickTime 7.6.6. I only see QuickTime in control Panel but not QuickTime 7.
    How can i fix this?

    If you launch your QuickTime Player and go "Help > About QuickTime Player", what version number appears for you, Ried?

  • Can I install icloud control panel on my Windows XP 2002?

    Could I isntall iClouds Control Panel in my Windows PX 2002?

    No, Windows XP is not supported.
    iCloud supported system requirements:
    http://support.apple.com/kb/HT4759

  • As soon as i installed icloud control panel on my window pc, my contacts were merged together, ie. 2 of my contacts now became under one contact like "contact A" and "contact B" the result now "contact A contact B", please how to solve this as i have more

    hi
    as soon as i installed icloud control panel on my window pc ( 7 Ultimate ), my contacts were merged together, ie. 2 of my contacts now became under one contact like "contact A" and "contact B" the result now "contact A contact B", please how to solve this as i have more 800 contacts in my address book.

    any help ?????

  • Cant sign into control panel after new

    cant sign into control panel after new Firmware instaltion. Please help. WRT160N v2

    Thats nice to know that, So just reboot a modem has solve the problem. Enjoy.

  • My ipod 6th generation does not show in control panel on computer Windows 7.....also when I try to download from itunes, I get message network cannot make connection.  can you provide me help?

    My ipod 6th generation does not show in control panel on computer Windows 7....also when I try to download from itunes, I get message saying network cannot make connection.  Can you help me with these issues?

    Hello jrsmallwood,
    I've a couple of articles that should get you back on your way!
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

    After recent upgrade to IOS 7 i an seeing systems rebooting very frequently. it just goes offline and comeback online after some time. IS this hardware issue or others also facing the same

    Hello there, Kishoresaraogi.
    The following Knowledge Base article provides some great steps to troubleshoot your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • No control panel after downloading 7.0

    after downloading 7.0 cannot get the control panel to come up.

    I had the same issue. I have a Griffin Survival case, and I really have to squish my finger in the bottom edge of my phone to be able to access my control center. I won't give up the protective features of my case, I love it. I guess I'll just do without the cool control center, because I know there's NO WAY Apple is going to move the access point because some cases don't allow enough surface to touch that low on the screen. It's really funny too, of all the cases available for protective purposes, the Survivor was the only one that didn't inhibit the sensitivity of the touch screen.

  • Quad SLI option not available in Nvidia Control Panel after complete reformat

    I had a SSD failure on this new build in Raid 0. Before I RMA'd the HD I went with one HD and was able to get Quad SLI running. Now after going Raid 0 with the new HD I had to reformat and I reloaded the OS and then updated all the drivers. Now I no longer get the option for Quad SLI even though my cards are seen by the device manager and the NCP. I can only go SLI on one card and can dedicate a GPU on the second card to Physx. I used the uninstall feature for each driver last night and then restarted in Safe Mode and used driver sweeper to clean out any remnants.  I then rolled back to an earlier nvidia driver on the 500 series with no luck. I installed Live Update but did not use it except to scan my system. It shows the latest Bios so that has not changed since. I also made sure that I was using the latest Realtek drivers. Any help will be appreciated.
    MSI P67A-GD65 (B3) latest Bios
    Win7 64bit Home Premimum SP1
    2 EVGA GTX 590 Classifieds
    16g 1600 Corsair Vengence
    2 ea SSD 120g Corsair Force GT's Raid 0
    Antec 1200W HC gold PS
    Coolemaster HAF X Case
    Corsair H100 H2O

    NO i was not able to get windows to load. I would have an intermittant SSD failure at diferent points during the installation process. I went to a single drive and it installed fine and after completion I downloaded updated drivers and went into the nvidia control panel and activated quad sli. I did have to remove one of the cards during the SSD install in order to facilitate the installation of the Sata cable into the MB. It is possible that the SLI bridge may have gone bad since it was disturbed. I ordered another one to be sure and it will arrive today. While waiting I switched the video cards in their slots to check them and I also verified that the PCI slots are good. Is there some history of a conflict between Raid 0 and 4 way SLI that I should be aware of?

  • How can i send my purchased apps(from itunes in my computer) to icloud through new icloud control panel on my windows computer

    I usually buy apps from my computer but i am unable to send these on icloud.
    I use a windows 7 64-bit
    I upgraded my itunes and got the icloud control panel but i am not able to stream my photos or apps to it
    Can someone help.

    Redownload all your purchased/free apps.
    How to redownload purchased apps from the App Store

  • Can't open mail "icon" in control panel office 2013 windows 8.1 (fully patched)

    I can't open mail "icon" in control panel office 2013 Home and business & windows 8.1 (fully patched), nothing happens just a short slowdown then this error.
    Have **replicated** the error on **three different PC's** including 2 x fresh install VM's using 2 x different install CD's
    I have also deleted the mail profile and try again and try to repair office. Have also tried Try to run the command "Control mlcfg32.cpl" and "Control
    mlcfg64.cpl" this does nothing
    win 8.1 64bit office 32 bit (have tried both 32 and 64)
    This is the event log error
    Faulting application name: rundll32.exe, version: 6.3.9600.16384, time stamp: 0x52158827
    Faulting module name: KERNELBASE.dll, version: 6.3.9600.16496, time stamp: 0x52b3e015
    Exception code: 0xc06d007e
    Fault offset: 0x00012eec
    Faulting process id: 0xc6c
    Faulting application start time: 0x01cf3de09eb3ddf7
    Faulting application path: C:\Windows\SysWOW64\rundll32.exe
    Faulting module path: C:\Windows\SYSTEM32\KERNELBASE.dll
    Report Id: e0176a9d-a9d3-11e3-8250-00155d003a04
    Faulting package full name:
    Faulting package-relative application ID:
    Thanks in advance

    Hi,
    I check this issue in my environment, but cannot repro this issue.
    Please check the following path to click the right cpl file:
    C:\Program Files (x86)\Microsoft Office\Office15\MLCFG32.CPL
    If that works, you need check this registry path to see if it points a right path to the .cpl file:
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Control Panel\Cpls
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support

Maybe you are looking for