HP LaserJet M1522nf scanner doesn't work with Windows 10 scan feature

I used the instructions from Honor Student to get my scanner going. However, I did not see "Shell Hardware Detection" anywhere. Please advise!

Hi @inetdude
Since there is no full feature software and driver for 8 or 8.1, I am not sure what else to suggest other than for you to reach out to Microsoft. The driver you are using is an in-OS driver, perhaps they can help you.
Microsoft Community
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

AT-AO-10 doesn´t work with Windows 2000

I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
If the board is unplugged, error messages are the same.

Hello;
You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
Regards
Filipe A.
Applications Engineer
National Instruments

Any product like the CanonScan LiDe 600F scanner (doesn't work with Windows8)

I had a CanonScan LiDE 600F that allowed me to enter text right on the scanned picture. Allowed me to crop, correct red eye, etc. As I am copying lots of older pictures to do a slide show I would like to continue to show names on the picture so grand children and great grand children will know whom they are looking at. I can't seem to find a Canon scanner that allows this.
Any help would be appreciated - if no Canon's does anyone know of any others? I no longer have the 600F as I could not get any drivers or whateve I needed to work with Windows 8 (which I hate). Doesn't seem to be a scanner forum?

Is this not a W8 driver?
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_lide_600f#DriversAn...
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Lexmark scanner doesn't work with mac os x

I have a problem with my scanner lexmark p4330. For two weeks now it doesn't work with my imac. I have the imac os x 10.7.5.
When I try to scan, my printer displays "the all in one driver did not respond" and in Image Capture it displays "lexmark language error".
I updated my softwares, there's one for lexmark but I can't install it and I don't know why!
Can someone help me please?

Mmm. Not sure what's going on. Has scanning ever worked with the OS you are currently running?
A couple of suggestions (my last two I think as I'm running out of ideas ). I realise that your problems are only with scanning, but sometimes resetting the printing system resloves printing problems. I wonder whether it will help with the scanning issue given that Print & Scan are lumped together in System Preferences. To do it go to:
System Preferences>Print & Scan, Control+Click or Right Click on the printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again using the '+' button.
If that doesn't help my last suggestion is to download the paid for app VueScan (which you can run in demo mode for free) to see whether it works or not. VueScan is very good and driving numerous types of scanners:
http://www.hamrick.com

Musket a3 USB 600 Scanner doesn't work with Yosemite

Hi there,
I have a Musket a3 USB 600 Scanner that doesn't work now that I have upgraded to Yosemite. Does anyone have a recommendation as to how I can use it? As Musktek aren't helpful and have told me they don't have a driver for yosemite... is there a way around this? Any help would be appreciated.

I found this and testing now.
http://www.canon-europe.com/Support/Consumer_Products/products/scanners/Others/P -215.aspx?type=download&language=&os=OS%20X%20v10.10

HP LaserJet 1320 Duplex Printing Not working with Windows 7

Hi
I've just bought a new PC with Windows 7 Home Premium. I have an HP LaserJet 1320 printer (Prod no. Q5927A, SN CNGW53RLRY).
I cannot find driver that works the same way as the previous driver HP LaserJet PCL5. If I use this driver and can still get duplex printing but it will only print one copy at a time.
If I upgrade to HP Universal Printing PLC (or PLC v5) I can print multiple copies but not duplex printing. I have searched high and low through the HP site but to no avail.
Any help and advice will be much appreciated.
Thanks
GB

Hello,
I've seen this same issue with my printers (other HP printers) whereby the default setting to support the Duplexing hardware was set to 'off'.
A quick method to check this is look at what the setting is for Duplex hardware in the Device Settings tab, and if it's not set, correct it.
Printer Properties:
From the 'Start' orb -> [Devices & Printers] -> right click on your Printer icon -> select 'Printer Properties' -> click on 'Device Settings' tab.
You should see a dialog similar to the mine (attached): look for the 'Duplex unit (for 2-sided printing)' and see if it's set to "Not Installed":
--> in either case, click on 'Not installed' and from the dropdown box, select 'Installed'... Click 'OK' to accept the changes and close the dialog.
Printing Preferences:
again, right click on your Printer icon -> select 'Printing Preferences' -> click on 'Advanced' tab.
-->Check to see if there is a 'Duplex Hardware' or '2-sided printing' option in here: mine doesn't show one but thougth I'd mention it nonetheless.
Click on the 'Finishing' tab and select 'Print on both sides'...or simply test print a multi-page document and set those preferences on-the-fly.
Let me know if this helps...
HardCopyTed
Regards,
HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
How to Give Kudos | How to mark as Solved
Attachments:
PCL6-DeviceSettingsScreenCap.JPG ‏81 KB

Install disk doesn't work with Windows Vista

I just bought a new HP Color LaserJet Pro MFP M277dw and the install disk isn't compatible with Windows Vista. Apparently there's no ful feature option for Windows Vista on an HP laptop. After several hours of work I downloaded several drivers and got the printer to print, but the scan function doesn't work that well without the HP software which hasn't been created for Windows Vista.

I am having a very similar problem but do not have an answer either. I am running an X61 Type 7676A12 with a Lenovo ACP50 port replicator FRU part number 40Y8160. I am running Windows XP Pro. The port replicator has never been very great and would not restore the external monitor picture properly when the laptop had been in sleep mode however it was serviceable if not optimal. After downloading and installing the October MS security updates the machine would get a BSOD when the port replicator was plugged in. Remove the replicator and reboot and it worked ok. Plug it in again and BSOD. I tried upgrading the drivers from 5.1.4a to 7.1.1.03Aug07 and then to 7.1.2. No go. Emailing Targus with the problem got no response. The port replicator is now relegated to my junk heap of useless rubbish.

Hp PSC 500 - scanner doesn't work under Windows 8.1 64-bit

I have a HP PSC 500 printer/scanner but scanning does not work.
My PC is a Windows 8.1 64-bit system - and I connected the printer/scanner to the PC with a parallel/usb adapter cable. Printing is OK but no scanning... Printer/scanner shows a message "no connection to PC" if I try to scan.
I have all the updates of Win8.1 - so the system is up to date!

Hi @inetdude
Since there is no full feature software and driver for 8 or 8.1, I am not sure what else to suggest other than for you to reach out to Microsoft. The driver you are using is an in-OS driver, perhaps they can help you.
Microsoft Community
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Laserjet 4240n driver does not work with windows home premium 64 bit

I recently was given a HP laserjet 4240n by my employer to use in a remote office. I am using a Windows version 7 home premium 64 bit laptop. I have tried the HP install wizard - no support for this printer. I have tried downloading the "correct" driver - but that doesn't work either.
I assume that there is something wrong but I have spent hours and still haven't been able to figutre out what is wrong and how to fix it!
HELP!
Thanks,
Steve

Hello Steve04104,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Flash Player doesn't work with Windows 8.1

Just purchased a new computer it has Windows 8.1 on it--Wanted to watch a You Tube video---and it said to update Flash Player--well It doesn't work at all. Nothing I can do to make it work---any ideas on how I can get this to work--or what ever it takes for videos, and graphics.
Sibyl

Hello @EssieScott,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your new HP computer running Windows 8.1 is not playing YouTube videos and are you are seeking assistance. I am providing you with a link to a Internet Explorer Forum post: Youtube videos in windows 8.1 will not play, which offers up solutions to resolve the issue you are describing. I recommend you review this thread and apply the steps suggested.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

VBS objshell.AppActivate doesn't work with Windows Task Scheduler

Hi all,
This script do the following :
Open Adobe Flash media Live Encoder with an encoding profile
Activate the Adobe Flash... Window
Send enter key to start encoding
Set objShell = WScript.CreateObject( "WScript.Shell" )
objShell.Run """C:\Program Files (x86)\Adobe\Flash Media Live Encoder 3.2\FlashMediaLiveEncoder.exe"" /p ""C:\Users\process\AppData\Roaming\Adobe\Flash Media Live Encoder 3.2\profile.xml"""
'Loading time
WScript.Sleep 5000
objshell.AppActivate ("Adobe Flash Media Live Encoder 3.2")
WScript.Sleep 5000
objShell.SendKeys "{ENTER}" 'start encoding
This script perfectly works manually, but the objshell.appactivate command doesn't work when i run it with the windows task Scheduler.
Any ideas ? Thx

Hi to all! I have found workaround for this issue - I wrote vbs, made run it via bat file, and converted the bat file to exe
vbs
Set oShell = CreateObject("WScript.Shell")
If oShell.AppActivate ("Connecting error to Bee") Then
WScript.Sleep 2000
oShell.SendKeys "%{F4}"
End If
bat
start C:\Users\User\Desktop\close.vbs
bat to exe
Advanced BAT to EXE Converter v2.83
I know it's some weird solution but it is working with Win Task Scheduler correctly. Try it ;)
In some cases you need to mark checkbox "run this program as an administrator" and (or not) disable UAC.

Fn + F6 to lock/unlock touchpad doesn't work with Windows 10

Hello,i have G580 i'v done an upgrade from 8.1 to windows 10so i'v have a small issue with touchpad :Fn+F6 to lock touchpad doesn't work when it was working as well in 8.1scrolling line at touchpad doesn't work to. so how to fix it, or will lenovo release drivers for windows 10 as she did for previous windowsis getting newer driver from elantech or synaptic website will resolve the problem ? cuz i did install 8.1 driver elantech and keyboard+mouse stopped working before reseting windows 10 upcoming driver. Best regards.

I have the same problem. Untilthey update the ELAN driver I go in to Settings, Devices, Mouse and Touchpad, Additional Mouse Options and disabel the ELAN driver. You can still turn it back on with Fn F6, but you have to go through the same steps again to turn it off. The nice thing is, it doesn't go back to enabled after awhile when you havent' been using the laptop.for awhile as it did before. The bad side is it takes about half a dozen key strokes to get to he disable. Hope this helps for now.

Media player hotkeys doesn't work with Windows Media Player 11

Hi;
I upgraded my windows media player 10 to 11 version. Now my hotkeys doesn't work. I was wondering if there is a way to solve this problem.

Hi
Do you mean the Toshiba Control buttons which control the WMP function like play, pause, stop, etc
On some Toshiba notebooks the Toshiba control buttons can be configured manually.
Please check this in the control panel -> Toshiba controls.
If you will be not successful I would recommend reinstalling the Toshiba utility again

HP Pavilion G6 1006sh external display doesn't work with Windows 8.1

Hi All,
After performing a clean install of Windows 8.1 Professional on my Pavilion G6 1006sh I can not use my external Samsung monitor connected on HDMI port.
The windows install went smoothly without any issues the OS had builtin drives for all of the devices. So there is no unknown hardware in device manager there is sound, wifi, LAN, etc. As for video card I can see two different devices. There is a Generic Windows VGA and there is an AMD Radeon HD 7400M installed. The AMD Catalyst software was installed successfully. In windows graphic properties I can choose from two different video outputs, one is the General Windows VGA the other one is the Radeon. However windows detects monitor connected only on General VGA (which is the inbuilt notebook display) and nothing on Radeon so I can not use my external monitor.
Of course I tried to restart laptop / monitor many times, unplug / plug HDMI cable but no success. When I plug HDMI cable into laptop the monitor displays a message that it is connected but there is no incoming signal. The HDMI port both on monitor and laptop is working I used the same configuration with Windows 7 x64 Professional without any issues. It is only the operating system that changed.
I tried to remove the General VGA device in order to force using Radeon but after restarting there was nothing displayed on the screen, I couldn't see anything neither on inbuilt nor on external monitor so I had to restore a previously saved system configuration.
I tired to install the latest graphic driver to Radeon downloaded from AMD site but Windows crashed and restarted during the install process.
Please help me with this issue or make a statement that this version of Windows is not supported on this machine so I have to revert the previous system.
Configuration:
modell: HP Pavilion G6 1006 SH
RAM: 2x4 GB
OS: Windows 8.1 Professional x64 (HUN)
OS drivers: installed and updated automatically by windows
Antivirus: Symantec Endpoint Protection 12.1
Thanks,
Zoltan
This question was solved.
View Solution.

Hi there @nzole
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you installed Windows 8.1 onto your system, but now you cannot detect an external monitor with HDMI. I am happy to help you with this.
First, in answer to your question, this model is not supported for windows 8.1. It was only sold in versions that were configured for Windows 7. That would mean there are no drivers specifically customized by HP for this model for Windows 8.1. It is possible you could find an appropriate drive from a model that does support Windows 8.1 that may be close enough in terms of hardware, that its driver could work, but there is no guarantee.
Here is the support page for your model: HP Pavilion g6-1006sh Notebook PC
HP Products - What If I Don't See My Operating System?
Do you still have the Recovery partitions, or did you make a set of recovery disks, prior to installing Windows 8.1?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HP LaserJet M1522nf scanner doesn't work with Windows 10 scan feature

Similar Messages

Maybe you are looking for