Hp laserjet m1536dnf mfp. "Connection error Check connection".

i have hp laserjet m1536dnf mfp. when tried to enable eprint at the web services setup menu... i get "Connection error Check connection". Network and Internet connection works fine. Please help?
It seems like the Printer is having a hard time connecting to the ePrint server to get me the email address.
Thanks,
John

Hi,
My firmware is up todate.
I have tried all the recommended support steps... currently had the printer on manual IP. Still same connection error.
Product Name: HP LaserJet M1536dnf MFP Formatter Number: P932T2L Serial Number: CNC9C7WB2W Service ID: 21270 Firmware Date: 20110405 Disable Fax: No Telecom Version: 04-015-001 Location: USA ADF Installed: Yes Max Monochrome Print Quality: FastRes 1200 Controller Number: 52 Duplexer Version: 0 Device Description: HP LaserJet M1536dnf MFP Language: English Asset Number: 153 Company Name: Contact Person: Device Location: warehouse Product Security: Off Quiet Mode: Off
Hardware Address: 10:1f:74:46:4f:20 Host Name: NPI464F20 IPv4 Address: 10.0.1.112 Status Ready IPv4 Address: 10.0.1.112 Subnet Mask: 255.255.255.0 Default Gateway: 10.0.1.1 IP Configured By: Manual WINS Server: 0.0.0.0 Preferred DNS Address: 205.152.37.23 Alternate DNS Address: 205.152.150.23 Status: Connected Hardware Address: 10:1f:74:46:4f:20 Link Speed and Duplex Negotiation: Automatic
Link Speed: 100 Mbps Duplex: Full Auto Crossover: Enabled

Similar Messages

Help! Getting "Connection error Check connection" when trying to enable HP Web Services on M1536DNF

Can anyone tell me what I need to do in order to enable HP Web Services on HP LaserJet Pro M1536DNF model? Everything works fine and shows it's connected to the network but I cannot enable HP Web Services. It says "Connection error Check connection" I've tried restarting everything; network, printer, computer. I've also updated firmware to latest version as well.

Hi snapry,
Welcome to the HP Support forums. I understand that you are getting an unable to connect message when trying to enable the web services for your Laserjet CP1025nw printer.
Please set a manual IP address and manual DNS servers for the printer. The instructions can be found in the document Printer Does Not Maintain Wireless Connection. There is a Windows section and a Mac section. In the Windows section you will find the instructions in the sub-section titled “Solution three: Assign the printer a static IP address”. For Mac the applicable sub-section is titled “Solution two: Assign the printer a static IP address”. When entering the information for the Manual Preferred DNS server please use 8.8.8.8 and for the Alternate Preferred DNS server please use 8.8.4.4. These are Google’s DNS servers.
After setting the manual IP address and manual DNS servers, you should have no problems enabling the web services.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Scanning issue with HP LaserJet M1536dnf MFP

I am getting the error messages in my windows 8 machines "The scanner is currently in use. Please wait until your previous task is completed and then try scanning again." I have a HP LaserJet M1536dnf MFP printer which is connected to the network and users connected to the network through wifi. I have installed the latest driver versions from hp.com. It will work for some time but again will face the same issue. In Windows 7 machines, there are no issues.If anybody is having solution to this problem please share.Thank you.

Welcome to the HP Forums fastndfury,
I see by your post that you are only getting the error on the Windows 8 computer, "The scanner is currently in use. Please wait until your previous task is completed and then try scanning again." I can help you with this issue.
I have provided a document to go through the steps to see if it will help resolve this issue.
'Another program has control of the scanner' Message Displays on the Computer When Scanning.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP ToolboxFX has encountered an error and cannot recover (HP Laserjet M1536dnf MFP)

We have an HP Laserjet M1536dnf MFP. Just starting receiving an error with the HP ToolboxFx on Windows 7 32 bit start-up. We can scan and the printer test prints, but it says the HP Toolbox has encountered an error and cannot recover. Please restart the HP Toolbox FX...or...toolbox version 006.15.01163. In toolbox screen, it says cannot connect to device.
I have tried a number of things and read posts, but still no luck. I can still scan, though. Help?

Hi,
Try installing the latest firmware of the printer, reboot both the printer and the PC and check for any difference:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-86043-11&cc=us&dlc=en&lc=en...
If that doesn't help, go to C:\HP Laserjet M1530 Basic Software\Utilities and follow the Scrubber.exe to uninstall the software (it may vary and may be named similar as NTScrubber for example).
Reboot your PC, go to Drive C and remove the M1530 Basic Software folder, then download and install the latest software below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-86005-3&cc=us&dlc=en&lc=en&...
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cannot Scan - HP Laserjet M1536dnf MFP - Mac OSX 10.9.4

Purchased a HP Laserjet M1536dnf MFP four days ago for use with an Apple MacBook Pro using OSX 10.9.4. I got it to print and copy, but keep getting the folllowing error message when attempting to scan:
“Scanner reported an error
HP Laserjet M1536dnf MFP is currently unavailable.
Please check if it is turned on and connected, or try
again later.”
Yes, it is connected and yes it is turned on. The version of HP Scan that was installed is 4.4.1
What can I do to get the scanning to function?
This question was solved.
View Solution.

Hi Rpanz,
Welcome to the HP Forums.
I see that you are having an issue with scanning.
I suggest that you uninstall the software and drivers and then click on the following link for the HP LaserJet Pro M1536 Multifunction Printer series Full Software Solution - OS X 10.9 Mavericks.
Please feel free to write back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Scaner problem - HP LaserJet M1536dnf MFP

HP LaserJet M1536dnf MFP
Wire LAN connected.
There are two stations working with the same MFP.
On one - everythink works fine.
On second - not.
Drivers are the same: 61.101.98561
IP address of printer is the same.
Both on Win7.
Issue is that MFP is printing documents but it refuses to scan any. After running HP Scan application it takes few seconds before it runs and when I finally hit 'scan' button it shows error telling that there is no scaner connexcted to that computer (unfortunatelly i can't paste this error).

Welcome to the HP Forums SamHell,
I see by your post the printer won't scan on the second computer running Windows 7 but it will print over the wired network. I can help you with this issue.
Temporarily turn off the Antivirus software to see if that is blocking the printer communication for scanning.
Test the scan again.
If you are still having issues then check the Windows Image Acquisition (WIA) services.
Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
Disregard the title.
Go to Solution three: Check the Windows Image Acquisition (WIA) services.
I have provided a document for setting up the Firewall to Allow a connection to the printer in case that is causing this issue. Configuring a Firewall to Allow a Connection with the All-in-One in Windows.
Test the scan.
Then you will have to go back in and turn the Antivirus software back on again.
If the issue persists run the Print and Scan Doctor since it might resolve the issue automatically or will find out if it is a driver, Twain, WIA connection or software issue.
Find and fix common printer problems using HP diagnostic tools for Windows?
Please let me know the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet M1536dnf MFP doesn't automatically answer faxes

My new HP LaserJet M1536dnf MFP does not automatically answer fax calls. I do not have a phone hooked up or an answering machine/voicemail. The 'Answer Mode' is 'Automatic'.
We use an analog converter to connect it to our internal digital VOIP phone system. The prior MFP that was connected didn't have any issues with answering/printing faxes.
I can see "Incoming call" on the display but it just rings and rings. If you press the 'Start Fax' button when it's ringing, then it will proceed with connecting and receive the fax, otherwise it eventually drops the call. This is not good seeing that a lot of faxes come in when the office is closed or otherwise unattended.
I tried the "Fax/Tel" setting, but that didn't work either.
Please help!
Thanks, much!!!
This question was solved.
View Solution.

Hi @DW-OH,
I see by your post that the faxes won't come through when set to automatic or Fax/Tel, but you can manually receive the fax. I can help you with this.
Update the printer's firmware.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
Select your operating system, click next, click the link for firmware.
Please check your private messages for the reset for the printer, I have seen this resolve this issue previously.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to use scan with networked HP LaserJet M1536dnf MFP using Mac OSX, but able to print.

Thanks for any help.
I'm using an HP LaserJet M1536dnf MFP.
It is networked wirelessly via an Apple Extreme and prints just fine over the network but will not scan.
Yet, it scans just fine when I move the printer's USB cable from the Extreme directly to the MacBook Pro (a bit of a hassel).
When I try to scan over the wireless network, I'm able to go through the scan driver interface and see the printer, but when I click on "Scan", I recieve this error message:
"Scanner communication cannot be established."
"HP LaserJet M1536dnf MFP is currently unavailabe. Ensure cables are connected.. etc."
I'm running OSX 10.8.3 on an old MacBook Pro (2008)
MacBookPro3,1
Processor Name:   Intel Core 2 Duo
Processor Speed:   2.4 GHz
Number of Processors:   1
Total Number of Cores:   2
L2 Cache:   4 MB
Memory:   4 GB
Bus Speed:   800 MHz

Hello, DP Photo, sounds like a scanning issue with the software. To start I want you to completely remove the software and then reinstall the programming from the packages available on the website I am going to link you to below. Use the full-feature software if available.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3974279
Try that and let me know how it goes!
-Spencer
PS I hope you are having a wonderful day!

HP laserjet m1536dnf mfp print and scan is very slow

Hi Sir/Madam,
HP laserjet m1536dnf mfp print and scan is printing and scanning slow on network. Sometimes scan is not work. That's why I have to reinstall the printer driver. So how to increase print speed?
Thanks in advance,

Hi riz1_4444,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer is printing and scanning slow on the network.
I will be happy to help you.
Make sure printer is connected directly to a wall outlet.
Try printing a hardware test on the printer to see if it prints slow or not.
Printing a Configuration Report. Select Method one: Print a Configuration Report from the printer control panel.
I would restart the router to see if this will resolve the issue.
Try another Ethernet cable.
If you are still having issue then test the printer by connecting the printer to the computer by a USB cable to see if it is something on the network that is causing it to slow down.
Hope this resolves your issue for printing slow over the network.
Thank you for posting on the HP Forums.
Have a wonderful day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet M1536dnf MFP jam in catridge area

hp laserjet m1536dnf MFP all in one printer showing jam in catridge area, have check printer sensers they are ok and threre is no jammed paper. have even tried another power board but to no aview.help

Hi @sytech,
Welcome to the HP Forums!
I understand that your HP Laserjet m1536dnf MFP all in one printer is showing a jam in cartridge area. I am happy to help!
Please take a look through this guide, 'Doc. feeder jam', 'Open door and clear jam', or Other Jam Message Displays on the Printer.
If that does not resolve your issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Password requiere on HP LaserJet M1536dnf MFP

Hello
My name is Ciprian and i am from romania.
I have a HP LaserJet M1536dnf MFP and i want to make a change to the next settings:
Device Configuration
Copy
Optimize: Picture Light/Dark: <-----*-----> Paper Size: A4 Paper Type: Plain Collation: On # of Copies: 1 Reduce/Enlarge: Original=100% Draft Mode: Off Two-Sided: 1 to 1 Sided Multi-Page Copy: Off
Whent i change in Optimize setiing fron Picture in TEXT I whant to save its requaiere a passord .
What is the deffault passorwd to save the setting i make
10x

Hi,
You will need to do a reset to remove the password.
Check your inbox on how to perform a reset.
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

EM error: Fatal NI connect error 12537, connecting to: (LOCAL=NO)

When I start EM DB Console with "emctl start dbconsole" then following error occures every 10 seconds:
Fatal NI connect error 12537, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 13-JUN-2012 15:41:53
Tracing not turned on.
Tns error struct:
ns main err code: 12537
TNS-12537: TNS:connection closed
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (24598) as a result of ORA-609
Wed Jun 13 15:42:03 2012Regards, Azer Imamaliyev

note: ORA-609 TNS-12537 and TNS-12547 in 11g Alert.log [ID 1116960.1] gives you a number of causes and possible solutions.
Eric

Fatal NI connect error 12500, connecting to:

Version Information:
TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
Time: 03-Aug-2006 15:08:48
Tracining not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS erro code: 0
Anybody have any information on this error?

I got the same problem as you did.
It was observed when I tried connect to APEX 2.2.1. Could anyone help with this issue? Thanks!
Please see the sqlnet.log information below:
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=techinfo02)(PORT=1521))(CONNECT_DATA=
(SERVICE_NAME=test01)(CID=(PROGRAM=F:\product\10.1.3\OracleAS_1\Apache\Apache\Apache.exe)
(HOST=XINTECHINFO02)(USER=SYSTEM))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.5.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.1.0.5.0 -
Production
Time: 26-OCT-2006 10:43:30
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0

Connection Error, cannot connect to game server

I Just updated to iOS 8.1. When I tried to play WordRoll I got an error message, Connection Error, Cannot connect to game server.
ave researched some answers and have tried several, log out then soft reset, delete app and reinstall, reset wireless, nothing seems to work.

I'm not sure. Prior to last Wendesday our net connection was fine, but from Wednesday evening it's been decidedly flakey during the evenings
Oh & I'm using a HH2 & am on Total Broadband option 3. I've also tried the Leatrix Latency Fix (several months ago) & have turned off the router for several mins (on Thursday evening). I've been able to connect again to the servers this morning (as I did yesterday morning). Here's the pathping (sorry for it being an image, I can't work out how to copy & paste from the dos box & don't really want to copy it out), my HH's saying I'm getting 7,616kps down & 448 kps up, Speedtest.net's saying 6.34Mb/s down & 0.38Mb/s up (now).

Drivers to be used on networked computers that arent directly connected to HP Laserjet M1536dnf MFP

Hi, I have been having problems connecting computers on network to printer. The printer is HP LaserJet Pro M1536dnf MFP. The computer that is connected to the printer directly through usb port is fine. I downloaded full solution drivers from the hp site, installed them and all is well. the problem is with the computers on the network, they cant even detect the computer from add printer. And I have enabled all the file sharing and printer sharing options in advanced sharing on all computers. I also tried installing the same drivers i used on local computer on the networked computers but its not working. Please kindly advise me on which particular driver I should use or solution.
This question was solved.
View Solution.

Hi Bravee,
Welcome to the HP Forums.
I see that you are having issues sharing the printer.
I will be happy to help you.
Printer sharing may or may not work properly. Can be very intermediate.
Here is a document for setting up printer sharing.
Share a printer.
I have provided a document for setting up the printer on the network through a Ethernet connection from the printer to the router.
Installing the Printer Software in Windows 7 for a Wired (Ethernet) Network Connection.
Hope this helps.
Thank you for posting on the HP Forums.
Have a great day.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laserjet m1536dnf mfp. "Connection error Check connection".

Similar Messages

Maybe you are looking for