HP laserjet M2727 driver for OSX 10.7.4 crashed application

I recently updated hp laserjet driver for M2727 nf printer. When I hit the print command, it crashes the application and does not print. Any suggestions to fix it?

What application are you referring to?

Similar Messages

HP LaserJet 1010 driver for Mac

Good afternoon, everyone! I need your help!
I badly need an HP LaserJet 1010 driver for Mac OS X 10.7. It has been written that PowerPC programms are not supported any more. Don't know how to cope with this problem.

Hi,
Follow these steps below to install the printer via Apple Software Update, the original CD is intended for older operating systems:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=3...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to install HP Laserjet 1020 driver for MAC 10.8.5?

How to install HP Laserjet 1020 driver for MAC 10.8.5? When I upgraded from Lion to Mountain Lion, my ability to print disappeared. Where can I get a driver that works? Thanks.

See:
Re: HP laserjet 1020 no driver for mac
Re: How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

The hard drive for my MacBook Pro recently crashed. I purchased and installed a new hard drive (i.e. Samsung SSD). However, when I try to re-install the Mac's operating system, I come to the part of the installation instructions where you asked to selec

The hard drive for my MacBook Pro recently crashed. I purchased and installed a new hard drive (i.e. a Samsung SSD). When I try to re-install the Mac operating system, I come to the part of the installation instructions where you are asked to choose a disk to install the software. However, there is no disk listed in the selection screen. Why is there no disk in the selection screen?

Welcome to Apple Support Communities
You haven't formatted the SSD, so you can't install Mac OS X.
First, close the OS X installer and open Disk Utility. Then, choose the SSD at the top of the sidebar, go to Erase tab, choose "Mac OS Extended (Journaled)" as "Format", and press Erase. Finally, close Disk Utility and reinstall OS X. See > http://pondini.org/OSX/DU1.html

Is driver for OSX 10.10 Yosemite available Laserjet CP1525nw?

I am getting ready to update my computers to OSX 10.10 but noticed that the latest available driver is for OSX 10.9 Mavericks. Will the Mavericks driver work with Yosemite? If not, will a new driver be released, and if so, how soon?
Thanks--

@rain007
Great question regarding the different naming conviention between the HP Color Pro Laserjet cp1525nw and the HP Color Laserjet cp1525nw. These are actual the same printer so please don't get confused by the word "Pro" being added.
You will also notice that you now get your Apple drivers via the Apple Software Update or ASU. Here are a couple of reference documents that should be of help.
Installing the Full Feature HP Print Driver in OS X v10.10 Yosemite with a USB Cable
Installing the OS X v10.10 Yosemite HP Print Driver from Apple Software Update
If the driver is not located in the ASU, then the dmg file is located on the printer page. It does say the it is compatible with both 10.9 and 10.10.
cp1525 dmg file
Let me know if you have any other questions.
AuntieEm
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Looking for HP Laserjet driver for OSx.10.8.2

I need a printer driver for an HP Laserjet 1200 or HP Laserjet 1300. HP says it's Apple's responsibility and Apple says it's HP's responsibility.
Any help appreciated. Thanks

Hi,
The HP Laserjet 1200 do compatible with Mountain Lion:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01664444 #N2471
Try removing any instalnce of the drivers and then check for Software Update:
Go to Computer > Macintosh-HD > Library > Printers and move the HP folder to the trash.
Browse into PPDs > Contents > Resources. search for 1200 within the folder. move the drivers to the trash and restart your Mac.
Next go to Print & Scan and reset the printing System:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01371980
Finally try connecting the printer again and check for any difference.
Shlomi

HP LaserJet 1005 driver for Windows 8.1 x64

Hello,
I'm unable to install the HP LaserJet 1005 series driver on my Windows 8.1 x64. Here is what I've done so far:
- downloaded ljP1000_P1500-HB-pnp-win64-en.exe
- started the installer program
- it successfully extracted installation data into C:\Program Files\HP\HP LaserJet P1000_P1500 Series
- (the printer's USB cable is not yet connected)
- A pop up window appears: "Waiting for user to connect the device."
- I connect the USB cable to the computer. The printer is turned on. (The USB cable is OK - verified on a different PC)
- However, the installer is unable to detect the connected printer. The following messages are reapeatedly written into the installer's log file:
[ 4- 6-2014 14:35:21:085]- LOG(8F0): IsNewDeviceConnected(vidpidList with 6 elements)
[ 4- 6-2014 14:35:21:153]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3D17)
[ 4- 6-2014 14:35:21:220]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:287]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4817)
[ 4- 6-2014 14:35:21:354]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:423]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4917)
[ 4- 6-2014 14:35:21:492]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:559]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3E17)
[ 4- 6-2014 14:35:21:625]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:692]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3F17)
[ 4- 6-2014 14:35:21:760]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:828]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4017)
[ 4- 6-2014 14:35:21:895]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
- note that after connecting the printer's USB, the printer appeared in the Devices and Printers Windows view. However, when I click on Properties and Driver -> Hardware I get that no drivers have been loaded for it.
It looks like the program cannot find the connected printer it this is causing the failure. Here is a download link to the full log file: log.
I've also checked the following two threads which adress similar problems, but there is no workaround in there for my specific problem:
- HP LaserJet p1005 windows 8 driver ?
- Windows 8 driver for LaserJet P1005 printer?
Please advice on how to proceed in this situation. Please let me know if you need further information.
Best regards,
Atanas

Hello Shindov,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Laserjet P1005 driver for winows 7 64bit

I am a member of MSDN, I installed winows 7 Professional 64 bit. It is a good system, but......
I have Hp Printer Model Laserjet P1005, I tried in compact mode, it still does not working in . I need driver for it.
Thanks

blakescience wrote:
Hi, i have tried the driver (the 2 drivers) and don't work. You send a document to the printer and it does nothing. Why? Why the drivers don't work?
I would suggest downloading and running the HP Printing Diagnostic Utility.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Laserjet 1300 driver for Win7 problem

Plugged my Laserjet 1300 into my new computer (System 7) via USB- and Windows couldn't find the right driver for it.
I canceled Windows trying to install driver automatically, and put original CD driver disk (Serial #Q1334-60107 ver 2.0) into drive-
but couldn't get Windows to recognize printer, even after re-boots.
Since I bought printer a while ago, I checked for updated drivers online, that would be 64 bit.
I installed this one:
upd-pcl5-x64-5.4.0.11744.exe
During driver install I plugged in printer & turned it on at what i thought was right time. I see this:
"HP Universal Printing PCL 5" as printer- but it won't print.
Tried Windows 'Uninstall' feature but it doesn't show the driver, to un-install it- OR where the driver's located.
** QUESTIONS: How do I Un-Install the driver? Do I use upd-pcl5-x64-5.4.0.11744.exe OR original disk driver #Q1334-60107 ver 2.0?
What's the procedure for installing this?- I can't find anything, despite an afternoon of Googling.
Thanks.
This question was solved.
View Solution.

Did you follow this guide to install the print? Installing LaserJet 1300 on Windows 7
You should not need to navigate to the driver you download. Actually stick it in the trash can for now When you selecet "Add a Printer" you need to select "Add a local printer." Ignore the writing to the right, that only applies if everything is working properly. If you follow the guide at the top it should get installed properly.
No need to feel foolish and no problem at all for helping. Thats what I am here for
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Hp laserjet 1102 driver for maverick

friends, i'm serching for solution to driver problem as i had updated my mac to maverick the problem is that my laserjet 1102 is not printing anymore pls help

It appears HP may not have released a driver for 10.9. Only shows 10.8, but maybe it will work.
http://www8.hp.com/us/en/support-search.html?tab=1#/qryterm=laserjet%201102&sear chtype=s-002

Laserjet 3100 driver for Vista OS

Need help finding a driver for my Laserjet 3100 on Vista OS
Thanks

DA61--
Here's another idea, with a caveat.
**I do not know if it will work. Please create a restore point on your PC before attempting this.**
Here is a link to the download page for the LaserJet 3200. It is a later version of the 3100.
http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=60706&swLangOid=8&swEnvOid=2093
Please let me know if you try this and how it turns out.
Best,
AlliBee
I am an HP employee, but opinions expressed here are my own.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if your problem is solved. If both apply......do both.

Laserjet 1300 Driver for Windows 7 64 Bits

Come on HP - I need the driver for Windows 7 64 bits for my HP Laserjet 1300 series.
I installed a generic driver which works OK for some applications.
But when using my Stenograph application the box that should be printed
around the text on the printed page is NOT correct: I only see the top and left side of the box shifted by 3 inches.

rainbowdog97 wrote:
Thanks very much for replying to my message. I got PCL 5 from both places -- from the Windows Update list and from the HP website. If it helps, at the hp website it is at:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=238322&p...
You can get to it through www.hp.com/go/windows7, where I also got PCL6.
I have a lenovo thinkpad x300, and connect to the LJ1300 with a USB. I installed PCL5, for example, and tried to print a simple text. But my printer does not respond (the light doesn't start to blink), and when I use the Print function, it gives me a message that indicates "error, 1 document".
I will be off of my printer for a couple of weeks but want to be up and running soon. I had hoped installation of Windows 7 wouldn't be dramatic.
Thanks once again.
The links you cite take you to a page where there are links to:
HP Universal Print Driver for Windows PCL5 x64
HP Universal Print Driver for Windows PCL6 x64
HP Universal Print Driver for Windows PostScript x64
As the name suggests, those drivers are intended to substitute for the "real" driver that is specific to a given printer. They primarily are intended for use where a network administrator is responsible for a variety of HP printers on a single network. See http://h20338.www2.hp.com/Hpsub/cache/343033-0-0-225-121.html Personally, I found the "Universal Print Driver" impossible to install and configure. Congratulations on installing it -- even if it doesn't work.
On the same page that you linked to, there is a link under the heading "Driver" that leads to "Product Support for Windows 7." That link basically leads nowhere useful for Windows 7. The conclusion that you're led to by these pages is that the only choice for Windows 7 is one of the Universal Print Drivers. This conclusion is erroneous.
I can't reconstruct how I found it, but if you go to the link in my previous post (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...) you'll get to an HP support page for using HP printers with Win 7. Essentially, this page divides various HP printers into 6 categories and describes your options for each category:
HP and Windows 7 printer driver options available for the selected product
HP print driver available
Windows 7 print driver available
HP LaserJet AIO/MFP product options
Product will be supported
Selected product is not supported in Windows 7
The Laserjet 1300 is listed as a Category 3, which means that a driver specific to this model is built-in to Windows 7. This is not the Universal Print Driver. The catch is that the driver for the Laserjet 1300 isn't available in Windows 7 out-of-the-box (at least, that's what happened in my installation). It only shows up if you permit Windows Update to update the list of built-in printer drivers.
I suggest that you completely uninstall your LJ1300. Disconnect the LJ1300. Then, right click on its icon in Printers and Devices and select "Remove Device." Then click on any other printer listed and then click on "Print server properties" in the menu bar. Click on the Drivers tab and Remove the Universal Print Driver (or whatever else looks like it's related to the LJ1300. Uninstall anything to do with the Universal Print Driver from Control Panel > Programs > Uninstall a program.
Now, you can take one of two approaches:
What I did was just plug the printer in and turn it on. If you've managed at some point to update the list of built-in printers, Windows should just identify and install the printer like any other USB device. Otherwise, you should get a popup asking you to give permission to search the web for a driver. Grant the permission. Windows will find the correct driver and install the printer.
Alternatively, go to Devices and Printers and start the Add Printer wizard. Tell it you're installing a local printer to LPT1. You'll get to the list of built-in printer drivers. Select HP in the left pane and scroll through the right pane. If you find the PCL5 driver for the Laserjet 1300, cancel the process and then add the printer as in the paragraph above. If you don't find an entry for the Laserjet 1300, click the Windows Update button. After a couple of minutes, the process will be finished, and now when you look there will be the PCL5 driver for the Laserjet 1300. Cancel the process and add the printer as in the paragraph above.
Good luck.

Need Geforce 9400m driver for OSX lion

Please help, I can't find the driver for the geforce 9400m for OSX lion on the Nvidia's website. There's only the drivers for OSX leopard and snow leopard.

Try turning off bluetooth. I noticed after doing some research and using xbench to test my system, GUI resources almost tripled after turning off bluetooth. I know thats odd but of all the fixes and ideas I have found online, this seems to be the only one which increased gaming performance. Be nice if we could download updated drivers from nvidia though. It will only be a matter of time before we have the ability to get lion drivers through nvidias site. Snow leopard is already there so im sure lion is to follow soon. If this doesnt help, go get yourself an optimization tool like onyx or CleanMyMac. This helped me out a little bit. Not much but enough to get another few FPS. Hope this helps.

I am looking for HP Laserjet CM2320 MFP driver for OSX 10.8.1

I have a LaserColor printer with all in one it is namely HP Color Laserjet CM2320nf MFP, once I upgraded my computer to the mountain lion OSX 10.8.1 I cannot scan any document, how can I go about this, any one help is appreciated. Thanks

Hi awwadalhabli,
There seems to be of documentation for the specific model compatibility with Mountain lion, the support currently provided include print & fax capabilities but not scanning support.
Did you upgraded your operating system from 10.6 or 10.7?
You should have the HP Laserjet MFP folder, what happens when you try using the HP Scan application?
Please let me know the answers to my question in order to better understand how we may bypass this limitation
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Color LaserJet CM1312nfi MFP driver for OSX 10.9.2

I recently updated my operating system to OSX 10.9.2 and now I can't scan. Scanning function in HP director is greyed out and my Apple scanning utilities do not detect a scanner installed. Tried switching from network to PC connection to no avail. When will HP have a new driver that updates full printer function compatibility with OSX 10.9.2?

Hello maili911,
Welcome to the HP Forums!
I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

HP laserjet M2727 driver for OSX 10.7.4 crashed application

Similar Messages

Maybe you are looking for