HP LaserJet M2727--- Help me!!!

I am on my third HP LaserJet M2727 in the last 3 months. My first two said Scanner Error 5. Now this one will turn on and work fine but then just shuts off and won\'t work again till the next morning. I\'ve talked to many techs and they said update your drivers and all that jazz. So someone sent me a link to do this and update my software. When I get to the USB cable thing, where it tells me to connect it, I do but it won\'t let me proceed saying its still not connected. It did work once but then it said try again. What do I do??? Help me!!!

LydiaWhite88,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • How do I install a scanner for HP Laserjet M2727 nf without the CD?

    I have an HP Laserjet M2727 nf printer, scanner, copier.  The printer and copier work fine, but I don't have the CD to install the scanner.  Do you know how I can install it?

    Hi,
    Please use the following support site to download driver(s) and install on your computer:
       http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?sp4ts.oid=3377076&ac.adm...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Networked HP Laserjet M2727 out of toner error

    I keep getting a printer out of toner error message when I try to print to a networked HP Laserjet m2727.  The printer is connected to a D-Link router.  Other PCs on the network can print just fine to the same printer.

    The PCs are running windows.  The printer is connected to the router via ethernet.  I'm connected wirelessly to the router.  The problem started when I updated the firmware on the M2727nf last week.

  • HP LaserJet M2727 nf - Driver for Window-7 Page Not Found

    I go to HP.COM
    I click on Support, Download drivers
    I enter the model laserjet M2727nf and click GO
    I get this:
    1 match found. Please select below. HP LaserJet M2727 Multifunction Printer series
    I click the printer name and get this:
    HP LaserJet M2727nf Multifunction Printer
    I click on the link and get this:
    Oops. We can't find that page for you.
    Or in some cases, as soon as I click on GO I get the page not found.

    LudekMatyska wrote:
    Almost the same problem with  OfficeJet Pro 8600 e-AiO, but I cant even click the printer name after search
    Hi,
    Please try:
        http://ftp.hp.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp laserjet p3015 Help please

    Hi, i got a HP LaserJet P3010, i set a password through HP Web Jetadmin, and now i forget it, i lock the panel too, How can i get back my pass or how i could reset de printer.
    Thanks a lot

    The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-​p/bsc-413
    You can also find the article related to this printer here:
    http://h20000.www2.hp.com/bizsupport/TechSupport/H​ome.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI​...
    This article has software, drivers, manuals, and more information related to the product.
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • HP LaserJet M2727 No Scan Option

    Hello, we setup a HP as and AD printer, however, once installed there is no scan option avaible.  We have a mixed Windows XP and Windows 7 environment.  Any ideas which driver will work or does something different need to be done to allow the users to scan.
    Thanks, Kathy

    Hi Meegan,
    This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
    http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Laserjet M2727 Network Scanner intallation

    I want to Install HP LaserJet 2727nf Serige SCanner in XP service Pack 3 System .
     I have install  Network Printer from HP Installation CD , But i am not able to install Scanner for it.
    PLEASE Hel p me to Install Network Scanner of Give me Perfect software to Install the same .
    You can Also inform be on my personal e-mail id
    [Personal Information Removed]
    Waiting for your valuable Responce

    LydiaWhite88,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP laserjet M2727 driver for OSX 10.7.4 crashed application

    I recently updated hp laserjet driver for M2727 nf printer. When I hit the print command, it crashes the application and does not print. Any suggestions to fix it?

    What application are you referring to?

  • HP LaserJet Printer Help

         I'm running Mountain Lion on my iMac and am attempting to connect an HP LaserJet 2420 Printer to it vie ethernet cable. The printer is detected by the computer, and the software downloads fine, but it gets stuck on the screen "configuring device." I have let it go for up to two hours with no results. I also tried the same printer on another iMac, also on Mountain Lion, and got the same result. I have tried installing different drivers to no avail. I know the printer works because Ican get it to print things like a usage page or menu commands straight from the printer itself. Can anybody assist me on getting it set up properly?

    Hi, quite strange, but...
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
              1.          To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
              2.          Choose System Preferences from the Apple menu.
              3.          Choose Print & Fax from the View menu.
              4.          Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • Shared Printer Bug After 10.7.4 HP LaserJet USB - Help?

    Before the 10.7.4 update, my HP Color LaserJet CM2320nf multi fucntion printer worked just fine with the built in OS X print drivers. I had the printer shared on the network via my iMac (2011) over USB and other devices could print to it via Bonjour.
    As soon as the 10.7.4 update hit, printing has been an issue. Whenever a print job is sent to the printer over the network the printer displays a 'Please Insert Paper' warning that has to be cleared on the device itself before the print will continue, even though the printer is full of paper... This does not happen when printing from the iMac itself, only when using the iMac to share the printer.
    10.7.4 seems to have been a really buggy update as it has caused problems with Wifi becoming unusable until the iMac is rebooted.
    Any ideas?

    You may have tried this already but in case you haven't, delete and re-add the printer on the client iMac - that is the one that is using the shared connection.
    With regards to the message, do you think it is a result of the wrong paper size being requested or expecting paper to be in a particular cassette or tray, like the manual feed?
    I also have to ask why you are sharing the printer? With the n and f suffix in the printer name I thought this would suggest the printer has its own Ethernet port and support wifi so it could therefore connect directly to your router rather than to another Mac.

  • OS 10.6.8 compatibility with HP Laserjet M2727 nf

    I have recently updated to a new iMac with OS 10.6.8. Problem is that the scanning function of my HP Laserjet M2727nf does not seem to be available. Worked fine with 10.5. Any suggestions?

    Hello Michael.
    One of the links in the "More Like This" section to the right has this link to an update of the full software and mentions that after installing this update the scanning was working again.

  • HP Laserjet 3052 help

    I have searched this topic and have seen where some people have managed to get their printers back fully functional.
    My question is, how do you add the printer by ip address. It is clear that doing all the other steps involved disables the printer function, but allows you to scan, etc. I just need to get the printer function back and I will be all set. Any help is greatly appreciated.

    I don't have that printer, but HP printers either have a front panel to see/set the IP address, or, they have a test/configuration page that can be printed out by pressing a button or something like that - it's usually described in the manual, but probably also online.
    Just to be sure - it is connected by ethernet, isn't it? USB printers don't have IP addresses.

  • HP Laserjet 5MP - help to set up via USB please

    I have my trusty workhouse, the HP Laserjet 5MP that I want to continue to use with 10.6
    Have just bought a parallel to USB cable, my system sees the cable, but I cannot get the printer to work - any idea on how to get it working.
    I have seen recommendations to connect via ethernet, but for some reason I haven't clue how to find or set up an IP address for the printer.

    See Mac OS X- About printing with a USB-to-parallel cable for potential problems using these cables with some printers and drivers.
    To use an Ethernet setup the printer must have a TCP/IP card installed - Jet Direct for that model. If there is such a card installed then there will be an active Ethernet port on the rear of the printer, and the card installed in one of the inside slots.
    Using an Ethernet port setup on the printer should be explained in the printer's user manual. if you don't have one you can download manuals from the HP web site.

  • HP LaserJet M2727 Multifunct​ion Printer series

    When printing from the printer device stopped permanently
    عندما اقوم بالطباعه على الطابعه تطفى فجاءه
    نرجو دعمكم

    2727, welcome to the forum.
    I suggest you start a thread here.  You will get a better response to your problem.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Cp1215 laserjet, need help with tray and transfer belt removal

    I need to remove the cartidge tray and transfer belt to clean a bunch of toner off of it. how do I do this ?
    The tray will not pull out, locking tabs or something.
    sporty

    hi
    i want to know how to remove transfer belt in hp laserjet cp 1215
    thanking u
    ajaz hussain
    sporty98 wrote:
    I need to remove the cartidge tray and transfer belt to clean a bunch of toner off of it. how do I do this ?
    The tray will not pull out, locking tabs or something.
    sporty

Maybe you are looking for

  • What happened with The Daily Show with Jon Stewart?

    Anyone notice that the The Daily Show with Jon Stewart has not been updated this week?. And I have just purchased a Multi-Pass.

  • What is Speech Recognition and how do you use it?

    Hello, people. I was on my System Preferences and just out of curiosity, I clicked on Speech. Then there was a tab on the right called Speech Recognition. What is Speech Recognition and how do you use it?

  • Data Pump Errors

    trying to execute the sample here: http://download.oracle.com/docs/cd/B12037_01/server.101/b10825/dp_api.htm#i1006925 Example 5-1 Performing a Simple Schema Export So i create a packge and I tried to modify it to do a table instead of a schema export

  • Help required with inittab mechanism on Solaris 11

    Hi we have an application running on Solaris 11 which uses /etc/inittab entries to spawn and maintain a number of daemon processes. I know that use of /etc/inittab is deprecated in Solaris 11 but at the moment we would prefer not to have to modify ou

  • Problem wihle downloading images

    This browser is really faster and better. I have a problem when I want to download images: only desktop as location works. Save as... and any other location, nothing happens. Pentium4 DualCore 3.0   Windows XP Pro