HP Laserjet M2727nf - can't get scan to work

I followed these instructions to the letter:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&dlc=en&lc=en &jumpid=regR1002USEN#
But I cannot my MAC to recognize the scanner. I am attached over a network. When I go to Printer Setup, the driver shows up as version 16.1. Do I have the right driver?
It prints just fine and I can see the printer webpage. How can I get scanner to work?

Apple doesn't show fax or scanner support for the HP MFP2727 in their list of drivers.
http://support.apple.com/kb/HT3669
But, HP shows a Firmware Update for this model that might or might not help.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=3377076&prodTypeId=18972&prodSeriesId=3377075&swLang=8&taskId=135&sw EnvOID=228

Similar Messages

HP Laserjet P1006 Can not get new print cartridge into printer.

HP Laserjet P1006 Can not get new print cartridge into printer. Received two new cartridges from HP. CB435A, 35A are correct numbers for replacement but round part on left side appears too large for channel provided. I can not get the old cartridge back into the printer either. What am I doing wrong.

Hi,
Please use the following instructions to fix:
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
For MAC filter, you have to logon to the router to see.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I get Lion to work with label printer- Brother QL 570 or Dymo 450 Turbo?

I can't get Lion to work with label printers, either Brother QL 570 or Dymo Turbo 450. I want to uninstall Lion and use Snow Leopard unless there is a way to make Lion work with these devices. Any ideas?

Dymo has released new drivers since Lion came out. Have you downloaded and
installed them from the Dymo website?
Some people have said that their Dymo label printers were set to off line by Lion, but
worked fine after going to Print & Scan, selecting the Dymo printer, and making sure
it was active/on-line. I had to do that with my Dymo 450 Label Writer.
I cannot offer any tips about Brother, but you may wish to check their website
for latest drivers.

Hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

hello, all of a sudden without apparent reason I can't get "MAIL" to function. It starts up but I get the color wheel turning like crazy and never ends. I've tried restarting and I still can't get it to work. PLEASE HEEELP!?

In the Desktop Manager > Sync > Configuration, make sure the calendar options are set to override Outlook.
Set it also to notify you of the changes, so you will have to approve any changes.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Have entrourage and want to use Mail. Can't get it to work.

I had a macbook and purchased the Microsoft office for Mac which included Entrourage.
I have now purchased a new macbook Pro and want to begin to use Mail rather than Entrourage.
I have Entrourage on my new computer but i can't get it to transfer my information to the the Mail program
I am on Charter.net at my office and sbcglobal.net at home.
How can i get this to work. I can receive on Mail, but i can't send.

check your outgoing port settings and make sure it's using a specific port and not the default port, also you might want to check to see if it is using SSL, TLS or any other encryption. Verify the setting from your old machine setup.

Got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?

If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it

HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?

I have a new apple dvd drive, I was told it will work with my imac, but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???

If it is this drive, note that it is for MBA's and Mini's only:
http://store.apple.com/us/product/MC684ZM/A
Ciao.

Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

Hi,
Is there an iPhone involved ?
If not, what happens if you remove the Apple ID on the iPad and then set it in Airplane Mode (allow a couple of minutes at this point) followed by re-adding the Apple ID ?
What, if any error messages are appearing on the Mac when you try to launch the App or Login to the iMessages server ?
Is the Apple ID linked to an iCloud account ?
In Messages 7 (Mountain Lion) this did not seem to be important but it seems it is in Mavericks/Messages 8
9:14 pm Friday; April 11, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong?

I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong? The receiver is a Lenovo eHome OVU430006/01 USB IR Receiver.

Hello,
You would need to pair the Apple Remote with the receiver. So I would use the generic Mac/PC receiver and follow these instructions:
http://support.apple.com/kb/HT1619
If that doesn't work then check in System Profiler to see if the IR receiver has been recognized by the PowerBook's hardware. You may require the install of drivers for this device to be recognized.
Best of luck

I have a go daddy email account and I can't get it to work on my iPad

I have a go daddy email account and I can't get it to work on my iPad

Try turning the email account off and then turn it on again. Settings>Mail, Contacts, Calendars>select your gmail account>Off. Go to the mail app and then come back to the account in the settings and turn it on again.
If you can't find any other way for the iPad to accept the password, delete the email account and then add it back onto the iPad.

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

My iPhone 5 went black. I tried pushing the on/off button and the circle button at the same time. It worked once and then it happened again and I can't get it to work.

Iphone 5 went black. Tried pushing on/off and circle at the same time. Worked yesterday and then did it again today. Can't get it to work.

You need to hold those button longer until you see the apple logo, then release, then wait for the phone to boot back up.

I just got a new computer with Windows 7 and all my songs were transferred to my new computer along with itunes. But I can't get it to work. I also tried downloading Quicktime and couldn't get it to download.

I just bought a new computer and had files transferred along with itunes to the new computer. I can't get it to work. It doesn't recognize the extensions for itunes. I also tried downloading Quicktime and couldn't get it to download.

iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I bought a DataPilot to transfer my pictures from my phone to my macbook, and I can't get it to work

I bought a DATAPILOT to transfer pictures to my macbook and can't get it to work. Any suggestions please?

Best if you try and explain what you are trying to acheive.
Iphoto is a different paradigm than you're used to. I don't understand why you are trying to transfer your edited photos back to an external disk.
There are tutorials here
http://www.apple.com/findouthow/photos/
Regards
TD

I have signed up for adobe conversion to microsoft word and i can't get it to work - can you help me

I have signed up for adobe conversion to microsoft word and I can not get it to work - can you help me?

Hi Mike,
I've checked your account. I see that you just purchased the subscription this morning. The order is still pending processing, which is why you haven't yet been able to log in an use your subscription. It can take 24-48 hours for a subscription to process fully. Once it does, you'll be able to log in and convert files.
I apologize for the inconvenience.
Best,
Sara

HP Laserjet M2727nf - can't get scan to work

Similar Messages

Maybe you are looking for