HP Laserjet M2727nf Fuser error

I installed a HP Laserjet M2727nf printer on my HP LE1901w computer using windows 7 and it is always telling me fuser error when I want to print a document. I have to off and on it several times before it prints. What do I do?

Send it to the service for fuser replacement ... hint: ask for the price first ;-)

Similar Messages

  • Fuser error for HP Color LaserJet 3600 Series Printer

    My HP Color LaserJet 3600dn  Printer have  Fuser error message.  What is the problem ?

    The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    You can also view the article related to this product here:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • Fuser Error code 50.1 on hp colour laserjet 4700dn

    Fuser Error code 50.1 on hp colour laserjet 4700dn. what should i do

    50.1 error message indicates a fuser under-temperature error. The fuser did not reach the correct operating temperature during the warm up process causing a 50.1 error. This could indicate a problem with the power source or it could be paper stuck in the fuser if the 50.1 error follows a paper jam.
    To resolve the fuser error, try troubleshooting steps given in below link:
    http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl11838

  • 50.1 & 50.6 Fuser error HP LaserJet 9040N

    I get a 50.1 & a 50.6 Fuser error on my HP laserjet 9040N pritner.  I recycle power & remove fuser & error go away I then print but next day error come back & I do the same thing again any idea here??

    After each print job I get the message on printer screen  "Engine error press [OK]"  It will print again only after pushing Ok button.  Is there a fix?  HP printers have not been that reliable, I 'm will not buy onother if this cannot be fixed.

  • HP LaserJet M2727nf incompatib​ility with Windows 8.1

    My  hard drive crashed and I ended up buying a new computer with a more recently released operating system.  I now have Windows 8.1.  My HP LaserJet M2727nf was working fine, but since I obtained the new operating system, the printer does not work.  The error message states that the problem is the operating system.   I have one of these printers in my home office and one in my church office.   Is there a work around for this problem?  I cannot afford new printers.  My budget is stretched to the limit with the new computer.  I am not tech savy so I will greatly appreciate any assistance.  Please speak in laymen's terms.

    You should download the driver for your printer, here what i get :
    Fo windows 8.1 32bit :
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=3377076&swItemId=ds_99353_9&swEnvOid=4157
    for Windows 8.1 64bit :
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=3377076&swItemId=ds_99374_9&swEnvOid=4132

  • 50.2F.00 fuser error

    I have a LaserJet M4555 MFP with a fuser error code of 50.2F.00.  The screen says to turn it off, then back on and if the issue persists, to call a tech.  Well, I have tried turning it off and back on.  I tried booting it without the network cable.  I even replaced the fuser.  And I still have the error. Any ideas on how to fix it without throwing parts at it?

    This is a low or no temp error. If the fuser has indeed been replaced with a known working fuser and still have the same error, then the next step to to check all the connections for the fuser as indicated below:
    W = 2: Reconnect the connectors (J53, J54 and J82) on the DC controller PCA.
    3. Replace the fuser.
    4. W = 2: Reconnect the connector (J62) on the low-voltage power supply PCA.
    5. If the error persists, replace the low-voltage power supply.

  • 4350dtn 50.2 Fuser Error

    Hi,
    I work in a firm, we have around 60 or 70 4350s. I've got one priner which returned a 50.2 Fuser Error, so I replaced the fuser. A few days later and the error is back.
    I have taken a fuser out of another printer and placed it in for now, but I'm half expecting this one to go wrong in a couple days now.
    Is there anything which could be casuing the printer to damage the fusers? 
    Thanks,
    Dave

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Laserjet board here:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • 50.7 Fuser Error Message

    What is a 50.7 fuser error message on a laserjet 1525nw ?
    This question was solved.
    View Solution.

    Hi jb2012d, 
    The product has experienced an error with the fuser unit. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. If you still receive the message follow the steps below.
    1. Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you still have the messages continue with next step.
    2. Turn off the product, wait at least 25 minutes, and then turn on the product.
    3. If the message persists, contact HP support. 
    Understanding Control Panel Messages
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

    HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
    OS: Windows 7 Ultimate x64
    Browser: Google Chrome 15
    HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
    Printer is connected by WiFi to 4 computers

    Hi AbZu, 
    You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
    http://support.google.com/chrome/?hl=en
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP LaserJet M2727nf

    I have recently purchased a Laserjet M2727nf. I need this printer to function as a network device only, since there are no PCs with 20 meters.
    How do I configure faxing from this device so that I can operate with the Scan To button? I read an article that said this was not possible?
    Can I scan to email over the network?
    Can I scan to a network shared over the network?
    What are the disadvantages of not having USB conectivity?

    The scan to device is ment to be used to scan on the Printer and send it to a particular PC buy setting up the printer to know your computer name,thats how it tells one computer from another becuase it couldn't do it with ip addresses because  DHCP ip assignment always changes the address. You should have a fax setup in the start menu in the printer folder,it should have configured that when you installed the software on the pc but you can do it yet.And it must be done on every pc.I don't know about scanning to a network share.This printer was designed to be a part of the network attached by ethernet not to do that is to hamper the full use of it.
                                           Donovan Hulbert

  • 50.5 Fuser Error with new fuser installed

    Our HP Color LazerJet CP6015 Printer stopped working because of a "50.5 Fuser Error". We ordering and installing a new Image Fuser Kit (220v) but it still shows the same error message. Anyone have any ideas how to fix the problem?

    Hi,
    You might have more luck on the bussines forum, this is the consumer forum and your unit is considered a bussiness unit, so the bussiness forum might be a place where you get a better answer.
    Find it with the link below.
    http://h30499.www3.hp.com/
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Printing from my Ipad to my hp laserjet m2727nf

    how can I print from my Ipad to my hp laserjet m2727nf?

    Hi,
    Firstly please check to see if your printer in the list:
    http://support.apple.com/kb/ht4356
    If YES, you can use this to fix/setup:
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    If NO you have to print using other apps (if applicable) such as
       http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
    More info from this:
       http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airpr...
      http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Important-Information-for-ePrint-Home-amp-Biz-...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Fuser Error

    I have a CP1518ni, that has only been used lightly for two months. It was brand new in October and was not used after December 2009. There is now a "fuser error" that won't reset after following all the tips in the support site. So far. we have tried the power off, then off again for 30 mins. Tried plugging directly into the wall. Tried a different room, and still the same error. the troubleshooting tree says contact support, so here I am.

    50.1 error message indicates a fuser under-temperature error. The fuser did not reach the correct operating temperature during the warm up process causing a 50.1 error. This could indicate a problem with the power source or it could be paper stuck in the fuser if the 50.1 error follows a paper jam.
    To resolve the fuser error, try troubleshooting steps given in below link:
    http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl11838

  • 50.7 fuser error

    I receive the 50.7 fuser error message. We have followed the guidelines found in the blog. Plug directly into wall, unplug and wait 30 minutes, even waited 24 hours, etc.
    When plugged back in error message disappears and we can print a few times and then error message reappears.it seems to print fine until the error message appears.
    What can be done to fix this permanently?

    Hi @Swahealy ,
    I see that you keep getting a fuser error. It will print a few times and then the error comes back again. I would be happy to help you.
    This error message refers to the printer having experienced an internal hardware error.
    This is probably the document you have already tried to resolve this issue. A 'Fuser Error' Displays on the Computer, and the Printer Does Not Print.
    The only other information I could find for this fuser error, is after getting the error, to turn the printer turned Off for 3 mins and then turn it back ON to see if the printer will resume printing.
    If the issue persists, unfortunately the printer will need to be serviced.
    If you need further assistance, please let me know the following information.
    What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    How is the printer connected? (USB/Ethernet/Wireless)
    Please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP LaserJet M2727nf MFP - PCL XL Error - is this repairable?

    This printer works fine offline - it copies and prints reports in duplex with no problem ... but gets an error (locks up) and no longer prints from the computer.  It has worked fine for the last year, since I purchased it as a refurbished printer from HP.  It seemed to deteriorate shortly before it failed completely.
    Is this repairable... (I was able to get the following printout once, but can't figure out how I did that!)
    PCL XL error:
       Subsystem:  KERNEL
       Error:            InternalError  0x7
       Operator:      Text
       Position:        1545
    I would appreciate any advice as to how to resolve this problem ... including where else I could look for an answer.
    Thanks for any help you can offer ... Melissa

    Your error:
    PCL XL Error
    Subsystem: Kernel
    Error: IllegalTag
    File Name: Kernel.c
    Line Number: 1921
     implies that the incoming print job includes a tag which is not supported by the protocol.
    To find out just what is wrong with the print stream would almost certainly require access to the source code (specifically module Kernel.c) of the firmware in the printer - available only to HP (or whoever was contracted to write the firmware).
    In earlier generations of LaserJet printer, the format of the error message (as per the PCL XL specification) was somewhat different; for example:
    PCL XL Error
    Subsystem: Kernel
    Error: IllegalTag
    Operator: SetFont
    Position: 43
    which could be used to discover the underlying fault by reprinting the document using 'print to file', then analysing the resultant .prn file, and finding the data associated with the relevant PCL XL Operator tag (which, in the above example, would be the 43rd operator in the print job).
    Although the new format of error message is possibly more useful to HP in determining the cause of the error (their having access to the source code of the firmware), it would have been very useful to independant consultants if the original Operator tag and Position elements of the error had also been included.
    If you get exactly the same error if you reprint the same document to the same printer, using the same application and print driver on the same workstation, then the fault is likely to be a driver error, in which case the only solution may be to use a different printer driver (if one is available).
    If doing a reprint as per above produces a different error (or no error at all), then the problem is intermittent, and is more likely to be caused by corruption of the print job between workstation and printer; check (perhaps by replacing one item at a time) cables, ports, switches, hubs, etc.

Maybe you are looking for