HP LASERJET M602 (CE993A)

does my laserjet m602 (CE993A)have an audible warning when the paper tray is empty?

Hello ELITEINS
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Similar Messages

  • No network connection after hp laserjet m602 firmware update

    After updating firmware on our hp laserjet M602 printers, the printers are no longer communicating with our print server. I can't even print configuration pages, if the Network cable is connected.  The update completed successfully and I can print using a USB connection.  The Event Log displays the following:
    EVENT:           42.B0.01            Firmware:     23000331_377983                    
    Description: Missing String ID: en-US: Please refer to the Jetdirect Admin Guide_Text
    Additional Notes:
    Before firmware update:                                            After firmware update:
    Firmware Datecode: 20111217                                   Firmwar​e Datecode:  20130722        
    Firmware Revision: 2131305_192069                     Firmware Revision:    2300331_377983
    All Help will be greatly appreciated.... JP

    Try to turn on device while network cable is disconnected (standalone) and let it completely boot till READY status.
    Connect the network cable & note the front panel status (display & LED's both).  Also note if the LAN port LED's are ON.
    Hope that there is no data being processed by printer (data LED on control panel).  If yes, then you might need to delete any pending jobs (including firmware download initiated from computer - if pending in que as a job)
    If printer shows READY status without any data, then you may try printing printer internal documents using control panel menus.  Next step will be to access printer through web brower (EWS page) and confirm if the device is available for use in network.
    Please mark the post that solves your problem as Accepted Solution
    Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
    (Although I am an HP employee, I am speaking for myself and not for HP)

  • EXPERT DAY REQUEST!!!!! Laserjet M602 postscript feature values (specifica​lly, "setpagede​vice")?

    Pasted previously on the Community Home/Printing and Digital Imaging/Printers - LaserJet forum but thought I'd take advantage of the "HP Expert Day" and so am copying the posting on the "printer and all-in-ones" board:
    I have just spent two hours trying without success to find the values that the Laserjet M602 recognises in the postscript "%%BeginFeature" dictionary block for "setpagedevice"; to select the input tray mostly but other stuff in general. Does anyone know where this info can be found? I don't have much hair left to pull out...!
    NB I'm on UK time (i.e. Pacific time + 8 hours...)

  • HP Laserjet m602 firmware upgrade successful_network connection locks up printer

    Our laserjet m602dn control panel displayed that a firmware update was successful, but connecting the ethernet cable to the printer locks it up.  The update removed a blinking amber attention light (on control panel) that kept the printer from going into "Ready" mode.
    After the firmware update, the printer displays "Ready"; printing works through a local connection; pinging to the ip address fails. Can a firmware update be successful on a defective jetdirect/formatter board? If the board is defective, why does a local connection work?
    Are there any known issues with the following part: CE988-67906?
    Thank you.
    JP

    JP_VA,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • PDF Print error win printing many pages

    Hi.
    I have a problem then I try to print an PDF file with many pages.
    I have Windows 2003 as the OS, and the Adobe PDF Reader X 10.1 as my PDF reader, the printer is an HP LaserJet M602n with 512MB Memory.
    The setup is that we have some thin clients that have the printer driver, the driver is HP LaserJet 4200n or HP LaserJet 4050n, and it works fin on the HP LaserJet M602 with small PDF files and Word and other text files.
    But then I print PDF files with many pages it is spooling fin but win it is going to print it says error, with out the printer is doing anything.
    Will a print server help me?
    Or is there a solution to my problem?

    Hello
    Before re-installing, it may be useful to
    a - repair permissions with Disk Utility
    b - trash the preferences file: <bootVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.plis t
    if it's not sufficient, try to print from an other user account.
    If it works this way, you will know that the application's files are not the wrongdoers as every account calls the same application file.
    Yvan KOENIG (from FRANCE samedi 1 mars 2008 15:33:41)

  • HP LaserJet 600 M602 printer goes offline every night

    Hi,
    I have a HP LaserJet 600 M602 CE991A printer on a wired network. I have quite a few other printers on the network as well and do not show me this kind of behavior.
    But for some reason, this printer, from as soon as I bought it, goes offline every time from around 5.20-5.30pm to around 8.30pm. I have a ping tester running as I am trying to figure out what's going on and I got 100% drop every night for that time period.
    I looked to see if there was a setting that puts this device to sleep or so but no, I cant find anything. I have tried with the energy setting sleep mode on or off, wake up events to trigger a wake up call to the printer but no luck.
    Firmware Bundle Version3.2.5
    Firmware Revision2302908_435019
    Firmware Date Code20140529
    I am out of options, in our other locations, we have sam printer but a CE993A models and they do not show this kind of behavior at all.
    I am at a deadlock here.

    Hi @Halan ,
    I see by your post that you aren't able to print when the laptop isn't in the same area as the printer. I would like to help you out today.
    What is the distance of the printer and the Laptop when the printer goes offline?
    Try these steps to see if it will resolve the issue.
    'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Laserjet 600 M602

    How can I print a usage report for the HP laserjet 600 M602?
    Thanks

    Hello bank1.
    I understand you would like to print a "usage report" from your Laserjet 600 M602. Unfortunately, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot.
    Good luck.
    I worked on behalf of HP.

  • LaserJet 600 M602 very slow between each documents

    Hi,
    Our Laserjet 600 M602 printer is very slow to print between each documents.  (around 30 seconds).  Same problem with osx 10.6, 10.7, 10.8 and 10.9.
    Can someone help me?

    Hello NorthernPike, and welcome to the HP Forums.
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
    I hope this helps!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • I have a hp laserjet 600 m602 that will print 8 1/2 by 11 prints at 50 ppm when I change to custom

    I have a laserjet 600 m602 when I change it to custom it prints so slow its going backwards is there any way around this
    the paper is 8 1/2 by 10 1/2  actually shorter why does it take longer  

    HI JOHNS55,
    I hope you are doing well and welcome to the HP forums;
    Quick suggestion if you are refering to the HP LaserJet Enterprise 600 Printer M602, This is a commercial product. I suggest searching and even posting in the forum for HP Business Support for a better chance at finding a prompt solution.
    You may find the commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Hope you find the help you need,
    RobertoR
    Remember . . .
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • HP LaserJet Enterprise 600 M602 driver issue

    Hello,
    I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
    Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
    Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
    Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
    Regards,
    Anatoly

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • LaserJet 600 M602

    Hi. This is my first time on this forum. I am looking for help. I am trying to access the web configurations for my printer in my office to make modifications to the settings. However, when I try to access the "change settings", it prompts me for a UserName and Password. I do not have this information. I believe the person previously assigned to this office had a password on it and never wrote it down for the next person. We have no IT specilast. I will have to be my own IT. I figured someone here could maybe help me out?
    The printer is a B&W HP Laserjet 600 M602

    Hello NorthernPike, and welcome to the HP Forums.
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
    I hope this helps!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Laserjet 600 M602 Delete print queue

    Hi,
    I have deleted jobs from my computer's printer folder, yet they are still being held in the printer. When I restart the printer, the jobs start printing. I know how to delete them one at a time. The job starts, delete it, the next job starts, delete it; that gets old.
    How do I delete the entire queue on the printer?
    The instructions on the HP web site do not match the menu on the printer.

    Hi Openheader:
    This can sure be a frustrating problem, and understand your issue. There is a solution that I could recommend, but would need to know which operating system you are using since the solution steps might vary.
    Regards,
    FirstTimer01
    FirstTimer01
    I am an HP employee

  • HP LJ 600 M602 uses paper from other tray

    I have a problem with a new HP LJ 600 M602 printer.
    I think it's best to discribe an example of the problem.
    For example i start a printjob of 1000 pages from tray 1 which holds 500 sheets. Now it should just say tray 1 is empty when it hits the 500 pages printed but it wil automatically continue to print from tray 2. This should not be happening since i turned off the option "Use other tray" on the printer it's self and the web interface. It is also turned off in the printer settings on the computer in word that is used for the printing.
    The actual configuration of the printer is:
    Tray 1: Manual
    Tray 2: blank paper
    Tray 3: paper with corporate logo1
    Tray 4: paper with corporate logo2
    And all have the option "use other tray" turned off.
    Could this be a driver problem or am i missing a setting somewhere?
    Sorry if my english is not 100% it's not my native language, and thanks in advance if you can help  me!

    Hello Jackkemkens
    The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • HP Laser Jet 600 m602 printing issues

    Device: laserjet 600 m602
    Issue: error submitting print jobs through print server or directly.
    Printer can be normally pinged and managed through web UI.
    However last event log entry is dated April 30 with error codes 49.2F.E3 and 49.2F.51.
    Since then I have managed to upgrade firmware to latest however nothing changed.
    Print job sumbitted directly from web UI reports success while nothing gets printed while printing normally generates error printing status in the job queue. Any help greatly appreciated.

    Hi damjano,
    The HP LaserJet Enterprise 600 Printer M602 series are commercial printers. I recommend posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    Also, here is a link to the support page:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • No Printer Resolution Options for hp LaserJet Enterprise 600 M601

    Running under Mac OS 10.6.8, we've run into a problem printing separations to our new hp LaserJet Enterprise 600 m601 printer from Illustrator CS4, CS5 and CS6.
    In the printer dialog box, once under the "Output" section, with the mode set to either "Separations" or "In-RIP Separations", there are no options listed in the "Printer Resolution" drop-down.
    I've tried re-installing the driver, changing the resolution settings in the printer itself, using a generic PS driver, and contacting hp directly (their solution was to contact Adobe). I have yet to contact Adobe itself, but none of my other attempts netted a different result.
    In the document ink listing, the Frequency and Angle listings are still editable, but needs to be done manually for every colour, and the dot shape options are non-existant.
    We had previously been using a hp LaserJet 2300n, but we were running into insufficient memory issues on an increasingly frequently basis. The driver for the 2300n had several different sets of Printer Resolution settings, so once the new printer was set up, I *assumed* that it would have the same kind of options.
    I have discovered that if I change my PPD from the proper driver (HP LaserJet 600 M601 M602 M603) to the old one (Hp LaserJet 2300) I am then able to select the resolution I want from the drop-down list, switch the PPD back to the proper one for the M601, and it seems to work (leaving the 2300 as the PPD file results in a warning and a failed print attempt).
    I also tried printing something from a non-Adobe program using the M601, and there were two options available for printer quality (resolution?) settings.
    Any thoughts?

    Re instakll the printers driver first remove the printer from the printer list.
    My only thought!

Maybe you are looking for