HP LaserJet MFP M276n prints vertical lines only

We are using this printer as a stand alone printer to copy bulletins for our church each Sunday. It has been printing fine BUT we moved it to another table in the office and it quit copying from the top side. I can run test prints fine from the memory of the machine but it will not copy anything...we get vertical lines up and down the page. What have I done to it!

Hi @jimrob65 ,
I see that you are having issues when copying, you are now getting vertical lines after moving the printer to another table in the office. I will do my best to assist you with this issue.
Most likely the printer is connected to a different power source since moving the printer, which can affect copying and scanning output.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Try another outlet.
I have provided this document for cleaning the scanner glass and the white plastic backing.
Troubleshoot Scan Quality Problems.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

How to print vertical lines for line items?

hi experts,
                can any one tell me how to print vertical lines for line items in ascript?
ive tried using sy-vline but its printing jus one line each for each item .i want it in columns ?if there are any control commands plz let me know how to print?
thanks &regards
narendar

hi narendar,
Welcome to SDN.
   u can go for box command.
Use the box command with zero width for vertical lines.
Position the line by x position and y postion.
syntax :
BOX <xpos> <ypos>
       <width>
      <height>
      <thickness in twips> twips.
Regards,
Arun.
Reward points if useful.

HT201269 my iphone 4 has vertical lines only ?

My iphone screen has vertical lines only. How to fix this?

Make an appointment with the Apple genius at an Apple Store.

I have a officejet pro 8500 getting a black vertical line only when i put doc. in feeder?

I have a officejet pro 8500 getting a black vertical line only when i put doc. in feeder?
thanks Karl

Clean the small glass strip under the ADF, also clean the withe scanner backing and white strip under the ADF.
I was an HP employee.
Kudos are appreciated if I have helped you.

This is regarding printing vertical lines for each and every field

Hi to all.....
1....Hi
here is a requirement
i want to print vertical lines and horizontal lines for each and every field in the output of a report.Here i want to see the output just like table i.e i want to draw line after each field.
                         suppose if the output list contains just 10 records, then the vertical line must end for 10 records.how to draw vertical lines for this requirement.
thanks and regards,
k.swaminath

Hi
In report you can use
sy-uline for horizontal line
sy-vline for vertical lines.
Check this sample report
DATA: BEGIN OF USR_TABL OCCURS 0.
INCLUDE STRUCTURE UINFO.
DATA: END OF USR_TABL.
DATA: L_LENGTH TYPE I,
T_ABAPLIST LIKE ABAPLIST OCCURS 0 WITH HEADER LINE, BEGIN OF T_USER OCCURS 0, COUNTER TYPE I, SELECTION TYPE C, MANDT LIKE SY-MANDT, BNAME LIKE SY-UNAME, NAME_FIRST LIKE V_ADRP_CP-NAME_FIRST, NAME_LAST LIKE V_ADRP_CP-NAME_LAST, DEPARTMENT LIKE V_ADRP_CP-DEPARTMENT, TEL_NUMBER LIKE V_ADRP_CP-TEL_NUMBER, END OF T_USER, L_CLIENT LIKE SY-MANDT, L_USERID LIKE UINFO-BNAME, L_OPCODE TYPE X, L_FUNCT_CODE(1) TYPE C, L_TEST(200) TYPE C.
L_OPCODE = 2.
CALL ThUsrInfo ID OPCODE FIELD L_OPCODE
ID TAB FIELD USR_TABL-*SYS*.
CLEAR T_USER. REFRESH T_USER.
LOOP AT USR_TABL.
T_USER-MANDT = USR_TABL-MANDT. T_USER-BNAME = USR_TABL-BNAME. APPEND T_USER.
ENDLOOP.
SORT T_USER.
DELETE ADJACENT DUPLICATES FROM T_USER.
LOOP AT T_USER.
T_USER-COUNTER = SY-TABIX. SELECT V~NAME_FIRST V~NAME_LAST V~DEPARTMENT V~TEL_NUMBER INTO (T_USER-NAME_FIRST, T_USER-NAME_LAST, T_USER-DEPARTMENT, T_USER-TEL_NUMBER) FROM USR21 AS U JOIN V_ADRP_CP AS V ON U~PERSNUMBER = V~PERSNUMBER AND U~ADDRNUMBER = V~ADDRNUMBER WHERE U~BNAME = T_USER-BNAME. ENDSELECT. MODIFY T_USER.
ENDLOOP.
SORT T_USER BY NAME_LAST NAME_FIRST.
PERFORM DISPLAY_LIST.
TOP-OF-PAGE.
PERFORM DISPLAY_MENU.
    * End of top-of-page
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM DISPLAY_MENU.
    * End of top-of-page during line-selection
AT LINE-SELECTION.
IF SY-CUROW = 2. IF SY-CUCOL < 19. T_USER-SELECTION = X. MODIFY T_USER TRANSPORTING SELECTION WHERE SELECTION = . PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 36. CLEAR T_USER-SELECTION. MODIFY T_USER TRANSPORTING SELECTION WHERE SELECTION = X. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 50. PERFORM TRANSFER_SELECTION. PERFORM POPUP_MSG. ELSEIF SY-CUCOL < 67. PERFORM TRANSFER_SELECTION. SORT T_USER BY NAME_LAST. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 81. PERFORM TRANSFER_SELECTION. SORT T_USER BY NAME_FIRST. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 93. PERFORM TRANSFER_SELECTION. SORT T_USER BY MANDT. PERFORM DISPLAY_LIST. ENDIF. ENDIF.
    * End of line-selection
*& Form DISPLAY_LIST
FORM DISPLAY_LIST.
SY-LSIND = 0.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
LOOP AT T_USER.
WRITE: / SY-VLINE, T_USER-SELECTION AS CHECKBOX, SY-VLINE, T_USER-MANDT, SY-VLINE, T_USER-BNAME, SY-VLINE, T_USER-NAME_FIRST(15), SY-VLINE, T_USER-NAME_LAST(15), SY-VLINE, T_USER-DEPARTMENT, SY-VLINE, T_USER-TEL_NUMBER(20), SY-VLINE. HIDE: T_USER-COUNTER, T_USER-SELECTION.
ENDLOOP.
FORMAT COLOR OFF.
WRITE: /(108) SY-ULINE.
ENDFORM. DISPLAY_LIST
*& Form DISPLAY_MENU
FORM DISPLAY_MENU.
FORMAT COLOR COL_HEADING HOTSPOT. WRITE: (91) SY-ULINE, / SY-VLINE NO-GAP, (4) ICON_SELECT_ALL NO-GAP, Select All, SY-VLINE NO-GAP, (4) ICON_DESELECT_ALL NO-GAP, Deselect All, SY-VLINE NO-GAP, (4) ICON_SHORT_MESSAGE NO-GAP, Send Popup, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, Last Name NO-GAP, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, First Name NO-GAP, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, Client NO-GAP, SY-VLINE, /(91) SY-ULINE, /(108) SY-ULINE. FORMAT HOTSPOT OFF. WRITE: / SY-VLINE, , SY-VLINE, Cli, SY-VLINE, User , SY-VLINE, First Name , SY-VLINE, Last Name , SY-VLINE, Department , SY-VLINE, Telephone , SY-VLINE, /(108) SY-ULINE. FORMAT COLOR OFF.
ENDFORM. DISPLAY_MENU
*& Form TRANSFER_SELECTION
FORM TRANSFER_SELECTION.
DO. READ LINE SY-INDEX FIELD VALUE T_USER-SELECTION. IF SY-SUBRC <> 0. EXIT. ENDIF. MODIFY T_USER TRANSPORTING SELECTION WHERE COUNTER = T_USER-COUNTER. ENDDO. CLEAR T_USER.
ENDFORM. TRANSFER_SELECTION
*& Form POPUP_MSG
FORM POPUP_MSG.
DATA: L_MSG LIKE SM04DIC-POPUPMSG VALUE Experimental Message, L_LEN TYPE I, L_RET TYPE C. LOOP AT T_USER WHERE SELECTION = X. PERFORM GET_MESSAGE CHANGING L_MSG L_RET. EXIT. ENDLOOP. IF L_RET = A. User cancelled the message EXIT. ENDIF.
    * Get the message text
L_LEN = STRLEN. LOOP AT T_USER WHERE SELECTION = X. CALL FUNCTION TH_POPUP EXPORTING CLIENT = T_USER-MANDT USER = T_USER-BNAME MESSAGE = L_MSG MESSAGE_LEN = L_LENGTH
    * CUT_BLANKS =
EXCEPTIONS USER_NOT_FOUND = 1 OTHERS = 2. IF SY-SUBRC <> 0. WRITE: User , T_USER-BNAME, not found.. ENDIF. ENDLOOP. IF SY-SUBRC <> 0.
    * Big error! No user has been selected.
MESSAGE ID AT TYPE E NUMBER 315 WITH No user selected!. EXIT. ENDIF.
ENDFORM. POPUP_MSG
*& Form GET_MESSAGE
FORM GET_MESSAGE CHANGING P_L_MSG LIKE SM04DIC-POPUPMSG
P_RETURNCODE TYPE C.
DATA: BEGIN OF FIELDS OCCURS 1. INCLUDE STRUCTURE SVAL.
DATA: END OF FIELDS, RETURNCODE TYPE C.
FIELDS-TABNAME = SM04DIC.
FIELDS-FIELDNAME = POPUPMSG.
FIELDS-FIELDTEXT = Message :. CONCATENATE Msg from SY-UNAME . INTO FIELDS-VALUE SEPARATED BY . APPEND FIELDS.
CALL FUNCTION POPUP_GET_VALUES
EXPORTING POPUP_TITLE = Supply the popup message
IMPORTING RETURNCODE = P_RETURNCODE
TABLES FIELDS = FIELDS.
IF P_RETURNCODE = A.
EXIT.
ELSE.
READ TABLE FIELDS INDEX 1.
P_L_MSG = FIELDS-VALUE.
ENDIF.
ENDFORM. GET_MESSAGE
*End of Program
Regards
Pavan

M602n Laserjet - How to print 66 lines in DOS

Running an old DOS program in virtual XP mode and need to print 66 lines instead of 60. On older HP Laserjet IIIsi, I could just change the setting on the printer manually at the printer itself. How do i change this setting on an M602 printer?

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Vertical Lines only

I have an Mac 12" Aluminum power book where the screen is not functioning properly. When I boot it up, the display turns on, usually a blueish screen with vertical line in the display that seem to represent the horrizontal postion of text that should be on the screen. As I move the mouse, these vertical lines move laterally in sync with the mouse movements.
Is there any way of determining if the problem is with the cable or inverter board or the LCD???
Thanks
Bob

Hi Bob's. Connect an external monitor to the Powerbook. Does that show the same thing as the built-in display? If so, the video circuitry on your logic board has failed, and the logic board will need to be replaced. If the external display looks fine, you have a problem with the video cable leading to the built-in LCD or with the LCD itself. If changing the display's tilt angle has any effect on what appears on the screen, the cable is probably pinched or chafed where it passes through the dsiplay hinge. If not, the problem is more likely in the LCD.
If your built-in display is backlit, your inverter is fine.

How to print vertical lines in smartform?

Hello friends,
Is it possible to draw vertical (continuous) lines in the main-area in a smartform? The line should start from the header and end when it reaches the footer. the line should look like it divides the main window.

hi,
you may specify an x-position and a length in this way:
code
SELECTION-SCREEN ULINE /12(10).
[/code]That means, "position at column 12 and draw an horizontal line of width 10 characters".
I hope this helps. Best regards
Reward points if found helpful...
Cheers,
Chandra Sekhar.

Vertical Line in a LineChart

Is there a built-in way to create a vertical line along a
lineChart? Or do I get to build it manually?
For an example, see the red line on the chart at...
http://trail.motionbased.com/trail/player/2232944
Thanks,
Jason

Hello Chitty,
There is no such key word to print vertical line in reports. In Script/Smartforms we can draw vertical lines. You should use SY-VLINE in side the LOOP. Then only you will get that.
Try this to get data into table format.
TABLES: mara.
DATA: BEGIN OF g_t_mara OCCURS 0,
        matnr TYPE matnr,
        spart TYPE spart,
      END OF g_t_mara.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
SELECT matnr spart
    INTO TABLE g_t_mara
    FROM mara
    WHERE matnr IN s_matnr.
LOOP AT g_t_mara.
    AT FIRST.
      ULINE 1(24).
    ENDAT.
    WRITE: /1(1) sy-vline,
            3(18) g_t_mara-matnr, 19(1) sy-vline,
            21(2) g_t_mara-spart, 24(1) sy-vline.
    AT LAST.
      NEW-LINE.
      ULINE 1(24).
    ENDAT.
ENDLOOP.
Thank you.
Best Regards,
Sasidhar Reddy Matli.

Vertical line in a report

Hi every body,
In a report I need to draw a vertical line using sy-vline up to a certain height.
i am writing d code like write : 50 sy-vline.Then it just draw a vertical line upto one row level.But I want upto the end of the page.
How can i draw vertical line upto a ceratin Height.Plz suggest.
Advance Thanks to all.
@Everyone: Please avoid responding to such
basic questions and keep the forums clean.
This issue can easily be resolved with a
little more effort by the user. Answering basic
questions or posting links is also treated as
an offense!
Edited by: Suresh Datti on Aug 24, 2009 12:36 PM

Hello Chitty,
There is no such key word to print vertical line in reports. In Script/Smartforms we can draw vertical lines. You should use SY-VLINE in side the LOOP. Then only you will get that.
Try this to get data into table format.
TABLES: mara.
DATA: BEGIN OF g_t_mara OCCURS 0,
        matnr TYPE matnr,
        spart TYPE spart,
      END OF g_t_mara.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
SELECT matnr spart
    INTO TABLE g_t_mara
    FROM mara
    WHERE matnr IN s_matnr.
LOOP AT g_t_mara.
    AT FIRST.
      ULINE 1(24).
    ENDAT.
    WRITE: /1(1) sy-vline,
            3(18) g_t_mara-matnr, 19(1) sy-vline,
            21(2) g_t_mara-spart, 24(1) sy-vline.
    AT LAST.
      NEW-LINE.
      ULINE 1(24).
    ENDAT.
ENDLOOP.
Thank you.
Best Regards,
Sasidhar Reddy Matli.

HP Color LaserJet MFP M570dw and HP Web Services

Hi,
I have a HP Color LaserJet MFP M570dw printer and have tried to enable the HP Web Services, but without success.
My printer is configured on a fixed ip-address, with a default gateway and of course with static DNS servers (8.8.8.8 and 8.8.4.4).
Every time when I try to enable the Web Services feature I get the error message "Connection error. Check your internet connection.".
My internet connection is working fine and the printer is able to communicate thru the firewall fine too. When I do some tracing I see the printer communicating to the public ip-address "23.21.172.122" but there is no response comming back. So I assume the problem is external and not related to my internal configuration. I have tested this with a fully opened firewall (allowing all communications from my LAN to the Internet) with exactly the same results. There is no answer comming back from the ip "23.21.172.122".
Also I can't find the HP Color LaserJet MFP M570dw printer in the supported HP ePrint printerlist.
The 400-series is supported, the 500-serie is not mentioned.
But since the webinterface of my HP Color LaserJet MFP M570dw printer is giving me the HP Web Services configuration page, I asumed this type would be supported too...
Does anyone have a clue how to get ePrint working on the HP Color LaserJet MFP M570dw printer?
Is there anyone who got the HP Web Services working on a HP Color LaserJet MFP M570dw printer?
Kind regards,
Rene.
This question was solved.
View Solution.

Hi Rene,
Have you tried updating its firmware version?
The latest firmware should improve the web services connectivity and may help resolving such an issue:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5210913&sp...
Also be sure to follow its steps which may help resolving a connection issue:
• Improvements made for connecting to HP Web Services.
NOTE: After updating from firmware datecode 20121002 to firmware datecode 20121019, if a connection to HP's Web Services cannot be established a Security Reset should be performed. Use the following steps to perform a Security Reset.
1. At the printer's touch screen control panel press the wrench & gear icon (Setup menu) at the top of the touch screen.
2. Using the scroll arrows on the right side, scroll until Network Setup appears then press Network Setup.
3. In the Network Setup menu select Security
4. Using the scroll arrows on the right side, scroll until Reset All Security appears and then press Reset All Security. Allow the reset to complete before attempting to connect to HP's Web Services.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to Print Vertically in Smart Forms

I need to print data in vertical format into columns in smart forms. Can any one give me the solution.

Hi Sreedhar,
In Smartforms, if you need to print vertical text, only possible way (That i know) is, Create a Bitmap image of the text and rotate the same to 90 deg and then use that image in your smartform....
If you can use adobe forms, you can rotate the text to any angle that you want....this is one of the main advantage of adobe forms.
Best Regards,
Ram.

Searching a text file and printing the line if found!

Hi, Im fairly new to JAVA and have been googling this for hours and havent found any results that
have helped me...
Im looking to search a text file for a value that is in a that is delimited by colons
eg 45787 : 398948 : 398884 : 398984
IF that value is found I need to print this entire line and move it into a string.
I can work out the delimit part, the problem for me is a)searching the text file
and b) tell java to print that line only??
Any help would be very very much appreciated
Cheers
James

public void printCourses() throws Exception
            stuinput[] courseObjArray = new stuinput[10]; //Make sure this is the same as the ammount in the text
               Scanner sc = new Scanner(new File("testfile.txt"));
               int i=0;
               boolean found = false;
               while(sc.hasNextLine())
               //Delimit this line with scanner
               Scanner sc1 = new Scanner(sc.nextLine());
               sc1.useDelimiter(":");
               courseObjArray[i] = new stuinput(sc1.next(),sc1.next());
               i++;
               }//while
               for(int i1 = 0;i1 < courseObjArray.length;i1++)
               System.out.println(courseObjArray[i1].courseCode);
               System.out.println(courseObjArray[i1].courseName);
               System.out.println(courseObjArray[i1].courseName);
               System.out.println("-----------------");
               String courseCode2 = "courseObjArray[i1].courseCode";
               if (courseCode2 == "12345")
                    System.out.println("working");
               else{System.out.println("Not Found");}
       }hmmm just wondering why could this method always return a "Not Found"....if the text file had a whole bunch of values like this
12345:Course1
12344:Course2
12343:Course3
isnt it surposed to return 1 "Working"?? because there is a 12345 in on of the line, in the semi colon delimited line with 2 values, one being the course code, one being the course name??
Given that there is 10 lines (from Array Object)

Vertical line when Swipe down for expose

Hi,
everytime i use 4 fingers swipe down / press F3 for expose, one vertical line comeout on middle of screen. this vertical line only appear when use that feature. need to know whether this vertical line is product's problem and how to solve it ?
Thanks in advance.

The ADF uses its own glass area on the scanner bed, it is the narrow (about 1" wide) strip on the left. Cleaning this area should resolve the issue. A single small spot would cause the issue you are seeing.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

[LaserJet Pro 200 color MFP M276nw] only vertical lines when scanning, scanner broken?

Hi all! I have a problem with the scanner in my HP all in one. If I scan (using the printer function or apples ImageCapture: same result) the output is just a lot of vertical stripes (in colors when in color mode). Not a trace of the image I try to scan. The lines are there even if i scan an empty white page. I see the stripes both when doing a preview scan and an actual scan. The problems are very similar regardless of if I use the flatbed or the feeder scanner (they are separate scanner hardware, yes?). I have updated to the latest software for the printer/scanner and I am connecting over bonjour via wireless. I am on Os X 10.9.1. Anybody having similar problems or is my scanner just plain broken? Thanks in advance!Jon

, , I understand that both of you are seeing vertical lines when scanning from your Laserjet M276nw. First, make sure the printer is plugged directly into a wall outlet and not a surge protector. Now, so I know where to begin I'd need to know the following:If you are seeing the vertical lines when you copy as well as scan?Are you seeing the vertical lines when you copy from the flatbed? The document feeder? both?If you are seeing the lines from both the flatbed and the feeder are they in the same place?Once I know this I'll be better able to assist you.

HP LaserJet MFP M276n prints vertical lines only

Similar Messages

Maybe you are looking for