Hp laserjet p1005 does not work with hplip 3.13.8-1 [FIXED]

Dear all,
my usb laser printer is a HP P1005, and it works with linux since HP released the firmware and the drivers (both provided with hplip).
I have been using this printer for 3 years now, with Gentoo and Archlinux.
From the latest hplip update (3.13.8-1, on August the 19th), I am completely unable to print: the job is sent to the printer, which *seems* to start to print (i.e., a very quick mechanical movement/noise), than it stops and the CUPS web interface reports a "filter failed error".
I tried to remove/reinstall the printer, to reload the firmware, but nothing helps.
Only downgrading the hplip package to 3.13.7-1 version fix it.
Is anyone else experiencing a similar problem?
The cups logs seem not very helpful, any idea on how to gather any useful information to try-to-fix this problem?
MJ
Last edited by MajinJoko (2013-09-08 18:47:14)

Thank you for your help.
I run hp-doctor, which reported a wrong plugin version.
So, I reinstalled the plugin (please note that the downloader needs /usr/bin/python to point to python2!), and now the printer works with the current version of hplip.
Solved!

Similar Messages

  • Final Cut Pro does not work with Yosemite. Can it be fixed?

    Final Cut Pro does not work with Yosemite. Can it be fixed?

    Hi Tom, I don't know if you can help me.
    I'm using Final Cut version 10.1.4 with Yosemite 10.10.2 and whenever I open FCP it opens for about 5 seconds (not allowing me to click anywhere) before closing with the message  "Final Cut Pro quit unexpectedly. click reopen to open the application again. This report will be sent to apple automatically." I have tried opening it multiple times and the same thing has been happening over and over again and i've tried everything I could find on the internet and nothing is working.
    HELP.
    Jada.

  • HP Laserjet P1102 does not work with Windows 10

    I have just upgraded from Windows 7 to Windows 10 and whilst my Canon MG6150 works with Windows 10, the other printer HP Laserjet P1102 does not. Looking at the HP website it seems that the Windows 10 drivers for this printer are not yet available. Is there any way I can use the printer without the dedicated drivers? I have been told I should try to roll back but the printer is not recognised in device manager. Please help!

    Manual, Please let me know the outcome.

  • HP Laserjet P1005 does not work under Mac OS X 10.6

    Driver is not listed and downloading the driver from HP still does not work. Guess HP has not yet updated for Snow Leopard. Anyone have a work around for now?
    I use this little black and white laserjet for all of my documents. Also have a few color Epsons but I do not want to use those for quick and dirty documents.
    Any help would be much appreciated.
    Ken

    The temporary solution (works good) is to download old drivers for HP P1000-1500 series (v.1.04) at following link:
    http://driverscollection.com/?file_cid=399489231573f9b4ad62f5159c3
    Sorry for my bad english (I'm Italian)

  • HP laserjet p1102w does not work with Mac computer version 10.8

    since i upgraded my Mac to 10.8 operating system, I am not able to use the ePrint function from my HP Laserjet P1102W printer. I was told that the current version of the firmware 20130213 does not support this function. Does anyone know when the new version of the firmware will be available to support this function? thanks much.
    This question was solved.
    View Solution.

    Manual, Please let me know the outcome.

  • Hotmail has an EMOTIONS tab which works fine with IE but does not work with Firefox. Is there a fix?

    I cannot use the emotions tab in the latest Hotmail. Nothing appears. It works fine with IE. Is there a fix?

    Works fine here on Linux. Make sure that you do not block [[JavaScript]].
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • My HP LaserJet 1022 does not work with my new computer with Windows 7. Can you help?

    I just purchased an HP p6803w CPU that runs on Windows 7.  When I try to connect my HP LaserJet 1022 it won't work.  Apparently, I need a compatible driver downloaded.  When I tried to download drivers from the HP website, it appears one of two did not install.  Help!  I am an online college student and desperately need my printer to work.
    This question was solved.
    View Solution.

    From your previous post, it sounds like at one point you are getting the pop up that says "installing device driver software," correct?
    If you are not getting this pop up in the lower right hand corner of you screen then I need you to:
    1. Try a different USB port on your computer. Some computer USB ports are "touchy" and if you try a different one it will work. It all depends on the make of the computer.
    2. Try a different USB cable. You might have a bad USB cable. Also, be sure that the USB cable isn't longer than 3ft long.
    3. Go into your device manager and see what printers have been installed. They should be listed under "printers" or "other devices" You might have to go to view and check show hidden devices to see these on your computer. If there is a yellow triangle or question mark on this device then you have a conflict with your computer. This is something in your computer causing this and not the software download.
    Keep me  posted.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

    Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

    Please check the Play Store app for any Flash updates and install them if present.

  • Flash player does not work with Ie or Firefox with win 8.1?

    Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
    If I try and install it it says it is already installed. Your onsite  installer says it is not applicable to my machine.
    I have followed all the normal steps re enabling addons and active filters etc.
    all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
    Version of flashplayer is 15....03.......

    Flash Player is a built-in component of Internet Explorer.  There's nothing separate to download or install.
    Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
    For problems where IE isn't being detected by sites that require Flash:
    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

  • My Time Capsule does not work with existing WiFi

    Following a question solved on March 24 by LaPastenague, but gone bad again.
    Apple AirPort Time Capsule
    I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
    I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
    Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured,  but then it works.
    The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
    So, I am curious if you have any idea ?
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

    I can deal with the last question first and easily.
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
    Open the airport utility .. go to the disk tab and select erase.
    When you select erase you will get mulitiple options.
    Quick removes the file table but does not delete the files,, it takes 2min or less.
    A Zero out data is the secure way,, by writing 0 ie low level drive format.
    It can take several hours..
    7 pass will take a week.. not recommended..
    35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    The fact that it did work and has now failed might point to faulty unit.
    The only way to tell is reset it properly to factory and start over.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
    Remember to keep all names short, no spaces and pure alphanumeric.
    Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

  • ITunes 12.1.1 does NOT work with Windows - Fix??

    Hi everyone,
    I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
    After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
    iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

    The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly.  Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components.  It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version.  I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

  • Home sharing does not work with new mountain lion update.

    home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

    Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
    If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
    My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

  • External USB HD does not work with HAL:

    External USB HD does not work with HAL:
    From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive  does not woks.
    But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
    I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
    My fat32 usb-stick works without any problem.
    If I try to open the device with KDE it appears an error popup wit this message:
    TODO: have to rethink extra options
    Error: kio_media_mount_helper
    The log from the kernel.log is
    Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
    Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
    Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
    Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
    Nov 6 22:03:17 myhost usb-storage: device found at 4
    Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
    Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
    Nov 6 22:03:17 myhost USB Mass Storage support registered.
    Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Nov 6 22:03:22 myhost sdb: sdb1
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
    Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
    Nov 6 22:03:22 myhost usb-storage: device scan complete
    and the error.log is
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Do you have some idea ....
    Bye.

    I have done the following:
    Downloaded the patched hal version.
    used makepkg in /abs/local/trunk/ to create a pkg for pacman
    used sudo pacman -U pkgname to install it.
    used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
    saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
    have i done something wrong?
    br fjodork
    WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
    So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
    pacman -Rd hal
    it will give you some warning about the dependencies, ignore  it since we are reinstalling hal in a few steps.
    First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
    So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
    unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
    at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
    installed, i guess there were issues with paths. anyway read on
    Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
    makedepends=('pkgconfig' 'gperf')
    options=('!libtool')
    install=hal.install
    source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
        hal
        hal-policy.patch
        cryptsetup_location.patch
        hal-0.5.9-hide-diagnostic.patch
        ntfs3g-valid-options.patch)
    md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
             '882f67668cb14a0a9e4a27ef22278027'
             '5ba8b610aa9763a5f42b9f7cbd7a86ad'
    then makepkg (i had to add --asroot, don't ask why
    and finally pacman -U hal-0.5.10-1-i686.pkg
    another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
    I have also put the policy files as per the wiki instructions.
    PS: I know this is a dirty way to getting things done but as i said, I'm just starting
    If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

  • APPLE TV DOES NOT WORK WITH NETFLIX

    APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
    I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

    It started working.....!!!!!  (It seems someone back there is listening)
    I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
    I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
    TIPS:
    I didn´t change any language or video quality configuration (scared to do so)
    I changed to ethernet (cable) instead of wireless
    My internet plan is 6 Megabytes (it was the same while it wasn't working)
    good luck!!

Maybe you are looking for