HP Laserjet P1005 driver for winows 7 64bit

I am a member of MSDN, I installed winows 7 Professional 64 bit. It is a good system, but......
I have Hp Printer Model Laserjet P1005, I tried in compact mode, it still does not working in . I need driver for it.
Thanks

blakescience wrote:
Hi, i have tried the driver (the 2 drivers) and don't work. You send a document to the printer and it does nothing. Why? Why the drivers don't work?
I would suggest downloading and running the HP Printing Diagnostic Utility.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

HP LaserJet 1010 driver for Mac

Good afternoon, everyone! I need your help!
I badly need an HP LaserJet 1010 driver for Mac OS X 10.7. It has been written that PowerPC programms are not supported any more. Don't know how to cope with this problem.

Hi,
Follow these steps below to install the printer via Apple Software Update, the original CD is intended for older operating systems:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=3...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to install HP Laserjet 1020 driver for MAC 10.8.5?

How to install HP Laserjet 1020 driver for MAC 10.8.5? When I upgraded from Lion to Mountain Lion, my ability to print disappeared. Where can I get a driver that works? Thanks.

See:
Re: HP laserjet 1020 no driver for mac
Re: How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

Laserjet 2600n network driver for vista 64bit

Is there any way I can have a network driver for HP Laserjet 2600n for Windows Vista 64bit .

Vista 64 bit drivers for Laserjet 2600n can be downloaded from the following weblinks:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&p...
Refer the following two links to configure the printer on Network
Link1:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
Link2:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

HP LaserJet 1005 driver for Windows 8.1 x64

Hello,
I'm unable to install the HP LaserJet 1005 series driver on my Windows 8.1 x64. Here is what I've done so far:
- downloaded ljP1000_P1500-HB-pnp-win64-en.exe
- started the installer program
- it successfully extracted installation data into C:\Program Files\HP\HP LaserJet P1000_P1500 Series
- (the printer's USB cable is not yet connected)
- A pop up window appears: "Waiting for user to connect the device."
- I connect the USB cable to the computer. The printer is turned on. (The USB cable is OK - verified on a different PC)
- However, the installer is unable to detect the connected printer. The following messages are reapeatedly written into the installer's log file:
[ 4- 6-2014 14:35:21:085]- LOG(8F0): IsNewDeviceConnected(vidpidList with 6 elements)
[ 4- 6-2014 14:35:21:153]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3D17)
[ 4- 6-2014 14:35:21:220]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:287]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4817)
[ 4- 6-2014 14:35:21:354]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:423]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4917)
[ 4- 6-2014 14:35:21:492]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:559]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3E17)
[ 4- 6-2014 14:35:21:625]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:692]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3F17)
[ 4- 6-2014 14:35:21:760]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:828]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4017)
[ 4- 6-2014 14:35:21:895]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
- note that after connecting the printer's USB, the printer appeared in the Devices and Printers Windows view. However, when I click on Properties and Driver -> Hardware I get that no drivers have been loaded for it.
It looks like the program cannot find the connected printer it this is causing the failure. Here is a download link to the full log file: log.
I've also checked the following two threads which adress similar problems, but there is no workaround in there for my specific problem:
- HP LaserJet p1005 windows 8 driver ?
- Windows 8 driver for LaserJet P1005 printer?
Please advice on how to proceed in this situation. Please let me know if you need further information.
Best regards,
Atanas

Hello Shindov,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP laserjet M2727 driver for OSX 10.7.4 crashed application

I recently updated hp laserjet driver for M2727 nf printer. When I hit the print command, it crashes the application and does not print. Any suggestions to fix it?

What application are you referring to?

Laserjet 1300 driver for Win7 problem

Plugged my Laserjet 1300 into my new computer (System 7) via USB- and Windows couldn't find the right driver for it.
I canceled Windows trying to install driver automatically, and put original CD driver disk (Serial #Q1334-60107 ver 2.0) into drive-
but couldn't get Windows to recognize printer, even after re-boots.
Since I bought printer a while ago, I checked for updated drivers online, that would be 64 bit.
I installed this one:
upd-pcl5-x64-5.4.0.11744.exe
During driver install I plugged in printer & turned it on at what i thought was right time. I see this:
"HP Universal Printing PCL 5" as printer- but it won't print.
Tried Windows 'Uninstall' feature but it doesn't show the driver, to un-install it- OR where the driver's located.
** QUESTIONS: How do I Un-Install the driver? Do I use upd-pcl5-x64-5.4.0.11744.exe OR original disk driver #Q1334-60107 ver 2.0?
What's the procedure for installing this?- I can't find anything, despite an afternoon of Googling.
Thanks.
This question was solved.
View Solution.

Did you follow this guide to install the print? Installing LaserJet 1300 on Windows 7
You should not need to navigate to the driver you download. Actually stick it in the trash can for now When you selecet "Add a Printer" you need to select "Add a local printer." Ignore the writing to the right, that only applies if everything is working properly. If you follow the guide at the top it should get installed properly.
No need to feel foolish and no problem at all for helping. Thats what I am here for
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Hp laserjet 1102 driver for maverick

friends, i'm serching for solution to driver problem as i had updated my mac to maverick the problem is that my laserjet 1102 is not printing anymore pls help

It appears HP may not have released a driver for 10.9. Only shows 10.8, but maybe it will work.
http://www8.hp.com/us/en/support-search.html?tab=1#/qryterm=laserjet%201102&sear chtype=s-002

Laserjet 3100 driver for Vista OS

Need help finding a driver for my Laserjet 3100 on Vista OS
Thanks

DA61--
Here's another idea, with a caveat.
**I do not know if it will work. Please create a restore point on your PC before attempting this.**
Here is a link to the download page for the LaserJet 3200. It is a later version of the 3100.
http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=60706&swLangOid=8&swEnvOid=2093
Please let me know if you try this and how it turns out.
Best,
AlliBee
I am an HP employee, but opinions expressed here are my own.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if your problem is solved. If both apply......do both.

Laserjet 1300 Driver for Windows 7 64 Bits

Come on HP - I need the driver for Windows 7 64 bits for my HP Laserjet 1300 series.
I installed a generic driver which works OK for some applications.
But when using my Stenograph application the box that should be printed
around the text on the printed page is NOT correct: I only see the top and left side of the box shifted by 3 inches.

rainbowdog97 wrote:
Thanks very much for replying to my message. I got PCL 5 from both places -- from the Windows Update list and from the HP website. If it helps, at the hp website it is at:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=238322&p...
You can get to it through www.hp.com/go/windows7, where I also got PCL6.
I have a lenovo thinkpad x300, and connect to the LJ1300 with a USB. I installed PCL5, for example, and tried to print a simple text. But my printer does not respond (the light doesn't start to blink), and when I use the Print function, it gives me a message that indicates "error, 1 document".
I will be off of my printer for a couple of weeks but want to be up and running soon. I had hoped installation of Windows 7 wouldn't be dramatic.
Thanks once again.
The links you cite take you to a page where there are links to:
HP Universal Print Driver for Windows PCL5 x64
HP Universal Print Driver for Windows PCL6 x64
HP Universal Print Driver for Windows PostScript x64
As the name suggests, those drivers are intended to substitute for the "real" driver that is specific to a given printer. They primarily are intended for use where a network administrator is responsible for a variety of HP printers on a single network. See http://h20338.www2.hp.com/Hpsub/cache/343033-0-0-225-121.html Personally, I found the "Universal Print Driver" impossible to install and configure. Congratulations on installing it -- even if it doesn't work.
On the same page that you linked to, there is a link under the heading "Driver" that leads to "Product Support for Windows 7." That link basically leads nowhere useful for Windows 7. The conclusion that you're led to by these pages is that the only choice for Windows 7 is one of the Universal Print Drivers. This conclusion is erroneous.
I can't reconstruct how I found it, but if you go to the link in my previous post (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...) you'll get to an HP support page for using HP printers with Win 7. Essentially, this page divides various HP printers into 6 categories and describes your options for each category:
HP and Windows 7 printer driver options available for the selected product
HP print driver available
Windows 7 print driver available
HP LaserJet AIO/MFP product options
Product will be supported
Selected product is not supported in Windows 7
The Laserjet 1300 is listed as a Category 3, which means that a driver specific to this model is built-in to Windows 7. This is not the Universal Print Driver. The catch is that the driver for the Laserjet 1300 isn't available in Windows 7 out-of-the-box (at least, that's what happened in my installation). It only shows up if you permit Windows Update to update the list of built-in printer drivers.
I suggest that you completely uninstall your LJ1300. Disconnect the LJ1300. Then, right click on its icon in Printers and Devices and select "Remove Device." Then click on any other printer listed and then click on "Print server properties" in the menu bar. Click on the Drivers tab and Remove the Universal Print Driver (or whatever else looks like it's related to the LJ1300. Uninstall anything to do with the Universal Print Driver from Control Panel > Programs > Uninstall a program.
Now, you can take one of two approaches:
What I did was just plug the printer in and turn it on. If you've managed at some point to update the list of built-in printers, Windows should just identify and install the printer like any other USB device. Otherwise, you should get a popup asking you to give permission to search the web for a driver. Grant the permission. Windows will find the correct driver and install the printer.
Alternatively, go to Devices and Printers and start the Add Printer wizard. Tell it you're installing a local printer to LPT1. You'll get to the list of built-in printer drivers. Select HP in the left pane and scroll through the right pane. If you find the PCL5 driver for the Laserjet 1300, cancel the process and then add the printer as in the paragraph above. If you don't find an entry for the Laserjet 1300, click the Windows Update button. After a couple of minutes, the process will be finished, and now when you look there will be the PCL5 driver for the Laserjet 1300. Cancel the process and add the printer as in the paragraph above.
Good luck.

What power management driver for u530 64bit Windows 8.1?

Having a lot of issues with my new (refurbished) Lenovo u530. One issue is that I have an unknown device in device manager that appears to be related to my lack of a power management driver. The reason I have no power management driver is because lenovo offers none to download on the drivers page when I select windows 8.1.
The Windows 8 option lists as working with the u530, Z410, Z510, Z710.
http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-u-series-laptops/ideapad...
When I go to the support page for z410/z510 I see they have an 8.1 driver available, but u530 is not listed.
http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-z-series-laptops/ideapad...
Z710 also has no 8.1 driver available on the lenovo site.
I have found a reference out there that suggested this driver: http://download.lenovo.com/consumer/mobiles/em8180214.exe but it's kind of out of nowhere and don't want to try it without somebody saying it's correct.

hi RegerREdhawk,
Thanks for Posting!
I would suggest using the same Windows 8 Power Management Software,
Lenvo Energy Management Driver for Windows 8 (32-bit, 64-bit) - IdeaPad U530 Touch, Z410, Z510, Z710
Im pretty sure that the version for 8.1 will be released for this model.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Status of HP LaserJet 4V Driver for Windows 7 (64-bit)

Purchased a new HP Pavilion PC after verifying Windows 7 Compatibility of my HP LaserJet 4V Printer. Microsoft's Windows 7 website said it WAS compatible. However, after buying the new PC and trying to locate the LaserJet 4V 64-bit driver I find that HP's Website says there is NO DRIVER. So, for now I can't install or use my LaserJet 4V printer any longer.
The LaserJet 4V Connection will be via EtherNet Port on my Cisco/Linksys WRT610 Router for sharing between a couple of PCs.
Does anyone know the real status of the driver or why MS shows the LaserJet 4V is compatible and HP implies by the lack of a driver that it is not?
Thanks
This question was solved.
View Solution.

OK, try the following: go to the devices and printers folder, Add a printer, Local printer, create a port, standard TCP/IP port, put in the IP address of the print server, Next, select the HP Laserjet 4V (just before Laserjet 5 in the list. If it is not in the list click on WIndows Update), Next, Next.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp 1100 laserjet printer driver for windows 7

How to install Hp 1100 printer in windows 7?

Hey farhanchd,
What is the full name of your HP Laserjet printer?
There are several models in the HP Laserjet 1100 series and would need to know the exact name to give you precise instructions.
I do know that the Laserjet 1160 has a driver available through the Windows Update system and may be the same for your printer. Please take a look at the information in the link provided below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
Hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

G700 OSD-Driver for Win7 64bit

Hello!
Today i have installed Win 7 Professional (64bit) on my G700.
It works, except for one thing.
I can't find a driver/utility for the OSD (multifunction buttons like WLAN and Bluetooth)
I've downloaded and installed the "Lenovo Energy Management" for the G770.
By this way the "OSD-Software" was installed and it works fine, except for two points:
1. there is no option to disable the Wireless Lan Card
2. the battery is not identified/supported
Is there another way to download a matching "OSD-Software" for the G700?
Greetings
Solved!
Go to Solution.

hi Sentinelmm,
Welcome to Lenovo Community Forums!
Please try uninstalling the current Power/Energy Management,
And try running this one on your System.
Windows 7 64/32 bit
Lenovo Energy Management
emw7034.exe
21.4MB
Hope this helps,
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Laserjet M1522nf driver for Windows 7 64-bit operating system

My operating system recognizes the printer on the network for printing, but not for scanning or faxing. I would like to install the correct driver, but there are five (5) different drivers listed without any explanation of the difference between them. What is the correct driver to install? Any other recommendations?

Hi,
Oracle WebLogic Server Downloads can be found at http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
I believe Oracle WebLogic Server is not certified yet on Windows 7 64-bit, and this explains why you cannot find installation files to download. More details about the product certification can be found at:
Oracle Certification Matrix
http://www.oracle.com/technology/support/metalink/index.html
Regards,
Hussein

HP Laserjet P1005 driver for winows 7 64bit

Similar Messages

Maybe you are looking for