HP Laserjet P1006 is not working on Windows 7 (64-bit).
I lost my original CD-Driver and I tried to download the CD-Driver on HP website but it doesn't work when I click printing. It seems that my HP Laserjet P1006 is not working on Windows 7 (64-bit).
Can anyone give me a link that works for installing driver for HP Laserjet P1006 for Windows 7 (64-bit)?
Thanks for helping!
Hi @achieverone ,
I can help you with finding the drivers for the Laserjet P1006.
Just to clarify, you were able to install the printer software, but it just isn't printing correct?
Here are the two drivers available for Windows 7 64 bit.
HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver.
HP LaserJet P1005/P1006/P1500 Printer Series Full Feature Software and Driver.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
Open and close the lid five times quickly. It should print off a page with black lines on it.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP
Similar Messages
-
HP Laserjet P1006 won't work with Windows 8.1
I have an HP Laserjet P1006 which I installed on my new Windows 8 laptop. Everything was working fine. I did an update last night to 8.1. The printer no longer works. I went to the website and downloaded the latest driver which said it would work with 8.1. After it was installed the printer still would not work. When I go to the control panel and see the printer it still tells me no driver is found. HELP
This question was solved.
View Solution.Hello
I understand you are no longer able to print with the P1006 on Win8.1.
Did you uninstall the P1006 first?
If not uninstall and reinstall the printer software again.
Both drivers are the same if you look at the version on the website and should still work with the Win8.1.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Laserjet P1006 does not print in windows 7 x64 even though the status of the printer is "printing"
HP LaserJet P1006
Windows 7 64-bit
No error message
No changes made to system, it never worked after installing Windows 7 64-bit
- printer properly installed and recognized as ready when plugged in
- when trying to print everything goes normal: document added in printer queue > printer status changes to printing
- but it just stays in "printing" for a few minutes and then it acts like it successfuly printed the document, showing to error, clearing the queue and going back to ready status
- and no page is being printed
- the printer harware works, because on other operating systems is has no problems (tested on two other computers): with other OS it works but with windows 7 x64 it doesn't work on another computer either
Can anyone help me with this?HI,
Look at Wifi Guy's post on 10-15-2009, titled Solved Photosmart C7280 All in One. Worked for me. Had been running around in circles for the last two weeks. Hope it works for you.
Good luck! -
HP Laserjet P1102 does not work with Windows 10
I have just upgraded from Windows 7 to Windows 10 and whilst my Canon MG6150 works with Windows 10, the other printer HP Laserjet P1102 does not. Looking at the HP website it seems that the Windows 10 drivers for this printer are not yet available. Is there any way I can use the printer without the dedicated drivers? I have been told I should try to roll back but the printer is not recognised in device manager. Please help!
Manual, Please let me know the outcome.
-
32-bit Oracle ODBC Driver does not work under Windows 64-bit
We have both Oracle Server 64-bit (10.2.0.3) and Oracle Client 32-bit (10.2.0.1) installed on the same Windows 2003 64-bit server.
We can create and test 64-bit Oracle ODBC System DSN using 64-bit ODBC Administrator.
We can also create a 32-bit Oracle ODBC System DSN using 32-bit ODBC Administrator.
However, the "test connection" does not work:
Unable to connect
SQLState=IM003
Specified driver could not be loaded due to system error 998 (Oracle in OraClient10g_home32)
We need the 32-bit driver due to 32-bit applications acessing the local 64-bit Oracle server.
How should we accomplish this?
Thanks.I applied 10.2.0.3 path to Oracle Client 32-bit and now the error is different.
This error message appears 3 times before configuring, creating or testing a System DNS:
"An unsupported operation was attempted."
I just click OK 3 times and then can configure, create or test the DSN.
However the 32-bit application still cannot access Oracle...
Yours. -
LaserJet 3055 will not work with windows 10
need hekp
HP LaserJet 3055 is compatible with Windows 10, it will work with operating system Windows 10. Check below link for printer compatibility with Windows 10:
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Name=HP%20LaserJet%203055%20All-in-One%20Printer&vendor=HP&Locale=1033%2C2057%2C3081%2C4105%2C16393&ModelOrVersion=Q6503A&BreadCrumbPath=LaserJet%203055&LastSearchTerm=LaserJet%2B3055&Type=Hardware&tempOsid=Windows%2010 -
Nac Agent Not Working on Windows 64 Bit
Hi All ,
I have a Cisco ISE 3315 With Version 1.1.4 .
We have Windows Work Station and we have some issue with Windows 7 64 Bit users !!
On Some 64 Bit Workstation the nac Agent is getting about 25 Minute to start Checking the Posture Statu !!
I don't Havec that Proble With 32 Bit Workstation . We are using Nac Agent 4.9.0.37 and Nac agent 4.9.0.42!!
Here is log that i get From the 64 bit WorkstationHi
Verify that supplicant is configured properly to conduct a full EAP conversation with ISE. Verify that NAS is configured properly to transfer EAP messages to or from supplicant. Verify that supplicant or network access server (NAS) does not have a short timeout for EAP conversations. Check the network that connects the NAS to ISE. If the external ID store is used for the authentication, it may be not responding fast enough for current timeouts.
Check whether the proper server certificate is installed and configured for EAP by going to the Local Certificates page (Administration > System > Certificates > Local Certificates ). Also ensure that the certificate authority that signed this server certificate is correctly installed in client's supplicant.
Check the previous steps in the log for this EAP-TLS conversation for a message indicating why the handshake failed. Check OpenSSLErrorMessage and OpenSSLErrorStack for more information -
Report a problem is not working on Windows 64 bit
I just downloaded the latest 10.5.3.3 version of ITunes for 64 bit windows. When I go to my purchase history, and click "Report a Problem" it just fires up the browser with the Apple Support page. http://www.apple.com/support/itunes/
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue with your purchase to the iTunes Store.
Regards. -
HP laserJet P1006 not working on Windows 10. Please help
HP laserJet P1006 not working on Windows 10. Please help
Hi,
Try installing the windows 8.1 drivers from HP's support site, those are more likely to work.
For any issues clarify your OS version, is it 32 or 64 bit? -
I have had this printer for about two years now. All of a sudden it has decided to stop working, and I cannot get it to work now. All connections have been connected and all software drivers updated. What can I do to resolve this issue? Thanks.
My HP P1006 printer not working.
Driver has been downloaded from HP site correctly.
Also, used different lap top but the respond was the same.
Both pcs ulilize Win 7, 64 with SP1. -
Hp laserjet p1006 is not being installed on window server2008 64 bit
hp laserjet p1006 is not being installed on window server2008 64 bit
Hi,
The printer is not supported on Windows Server 2008, only the operating systems listed below are compatible:
http://support.hp.com/us-en/product/HP-LaserJet-P1000-Printer-series/3435682/model/3435683/drivers
The latest supported server OS is Windows 2003. any newer Server OS is incompatible with the printer.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Hp laserjet P1006 doesn't work properly
my Hp laserjet P1006 doesn't work properly on my windows 7(64-bit) and whenever I try to print a page the orange light just flashes and then the green light flashes and then it doesn't print at all.I've tryed everyway including reinstalling the software or even turning it off and then turning it on.Pleaseeeee.............help!!!!!!!!!!!
Hello
I understand you are no longer able to print with the P1006 on Win8.1.
Did you uninstall the P1006 first?
If not uninstall and reinstall the printer software again.
Both drivers are the same if you look at the version on the website and should still work with the Win8.1.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
M1522 nf scanner is not working for windows 8.1
till windows 7 scanner & printer is working.
windows 8.1 scanner is not working.
i tried all the softwares in page http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3442754&spf_p...
please update your softwares that are not working for windows 8.1Hello Nani134,
To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet M1522nf is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime:
HP Support Center.
I hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Exporting Crystal Report to HTML is not working in Windows 7
Hi Sir,
I am trying to export Crystal Report to HTML format using VB.NET code. Functionality is working fine at Windows XP Environment (Save to Disk, Open an Application and Email Attachment). But the same functionality is not working at Windows 7 Environment (both 32-Bit as well as 64-Bit).
Below is the code to Exporting Crystal Report to HTML in VB.NET.
Dim CrDiskFileDestinationOptions As New DiskFileDestinationOptions
Dim CrFormatTypeOptions As New HTMLFormatOptions
Dim vFormat As Integer
Dim CrExportOptions As New ExportOptions
Dim vRdReport As New ReportDocument
Dim sfd As SaveFileDialog
Dim vFileName As String = Nothing
vRdReport = vRptSource
sfd = New SaveFileDialog
If Not (vRptPath = "") Then
sfd.InitialDirectory = vRptPath
End If
sfd.Filter = "Webpage, Complete(.htm;.htm)|.htm|Web Archive, Single file(.mht)|.mht|Webpage, HTML only(.htm;.html)|.html"
If sfd.ShowDialog = DialogResult.OK Then
' Set the disk file options.
CrDiskFileDestinationOptions.DiskFileName = sfd.FileName.ToString()
Else
Return
End If
CrExportOptions = vRdReport.ExportOptions
CrFormatTypeOptions.HTMLFileName = vFileName
CrFormatTypeOptions.HTMLEnableSeparatedPages = True
CrFormatTypeOptions.HTMLEnableSeparatedPages = True
CrFormatTypeOptions.HTMLHasPageNavigator = True
CrFormatTypeOptions.UsePageRange = True
With CrExportOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.HTML32
.DestinationOptions = CrDiskFileDestinationOptions.DiskFileName
.FormatOptions = CrFormatTypeOptions
End With
vRdReport.Export()
Catch ex As Exception
MsgBox(ex.ToString)
End Try
Code working fine at Windows XP, But it is not woking in Windows 7 environment.
Please can anyone share your valuable thoughts or ideas reg. this.
Thanks in Advance
Deivanayaga Perumal D.user13509659 wrote:
Run this code to reproduce the issue.Which issue?
It looks like inheritance is broken in the component hierarchy for JFrame in Windows 7 JDK 1.6.0_23-b05. The only thing remotely related to inheritance in your code snippet is the WindowListener, which does little. See camickr's advice about built-in exit management.
EDIT - using the post title as a clue, I realize you may be talking about the component hierarchy, and whether the contentPane's background is visible through the upper layers. Instead of guessing, I'd prefer you describe your "issue" accurately (observed vs expected behavior).
Edited by: jduprez on Feb 10, 2011 1:01 PM -
Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition
I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
is the deployment server.
I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
Message:There is an error in XML document (1, 331491).
Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
Please provide suggestions on this I need to resolve this ASAP.Hi,
This question is better asked here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
Experts here are more familiar about it and they can give you more efficient suggestion.
Thank you.
Maybe you are looking for
-
Sharing an iTunes library with another user
My wife and I both got iPad2's recently. I would like to add some of my photos from iphoto and some of my music from iTunes to her iPad. I have one iTunes account. I have built it over the years and it recognizes my iPhone and my iPad. Can she s
-
Hello while creating a new entry in IDoc metadata , in IDX2 , getting following message : "I::000" and nothing happens after hitting continue: please suggest Best regards Krishna
-
Pcastconfig --sync_library failed!
Hi. I''ve started to have an error during sync_library where it fails when it hits a single UUID. It always stops at this point" Synchronization of '9ACB0C8C-8D68-4CE8-9E4B-F50C33250C87/03569096-B6BF-400A-A6BA-32CE1DE0FF4E' failed! I located this res
-
Trying to create a selection screen dynamically
Hi All, My requirement is to fetch values from database table.A particular field in the table has certain values,which i am supposed to create as radiobuttons.i.e i need to pick the values and create a dynamic selection screen. Can any one help me in
-
CDONTS Form Mail question - help needed
I have a form on my asp page called MyMail.asp. The form is linked to cdonts.asp_form.asp which sends an email of filled in text boxes and comboboxes to my email address. It works fine when all the fields (eight of them) are filled in, but doesnt sen