Hp laserjet P1006 Not Printing everyline of text

My printer is not printing every line of text. It omits 3-4 lines. These are spaced evenly apart on the page. Before this started it seemed like the printer, when printing was coming out especially hot and the printer it self was steaming. The paper would actually curl from being hot. Any suggestions. I have replaced the toner cartridge. Run a diagnostic check. Says printer is working properly. Run the printer cleaning. Still to no avail. Need help.

What brand and model is the router?
It does sound like the issue is isolated to one Mac system since it works from the other.
Reset the Mac printing system exactly as outlined in this document from Apple.
Next, install the full featured driver from HP. This driver package includes support for OS X 10.5.
This should reset the printing system and remove any software that may be causing a conflict.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

HP LaserJet P1006 not printing

Just connected my HP LaserJet P1006 to the USB port of my wireless router. When I tried to print my computer went on the Net to download the printer driver. I tried printing again. I got the print dialog box, selected the printer which was connected to my wireless router, and clicked on “Print” button. The HP printer app starts and reports that the page was completed but the printer just sat there with no output and no error message on the computer either. The printer works fine when I print from my MacBok Air. What am I missing?
1.HP LaserJet P1006
2. MacOSX 10.5.8
3. No error messages
4. Just installed printer
This question was solved.
View Solution.

What brand and model is the router?
It does sound like the issue is isolated to one Mac system since it works from the other.
Reset the Mac printing system exactly as outlined in this document from Apple.
Next, install the full featured driver from HP. This driver package includes support for OS X 10.5.
This should reset the printing system and remove any software that may be causing a conflict.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly.

laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly. i've cleaned the assembly a few times beofre to restor the colors as the printer is in a semi-dusti environment. after cleaning the printer was fine, then about a week later, the black - and only the black - stopped printing on the right side of the page. the text is straight across left to right then starts to waver and then then stops altogether. i tried a different black toner cartidge and the problem remains.

> so this is strictly a hardware issue as no drivers are involved. Yup. > Still prints all black. Ok its not the controller. > Still prints all black. Ok its not the fuser. > its still prints all black. OK its not the laser itself > it still prints all black. Not that part either. > What else left is there? Formatter board hasnt been mentioned. Something is sending a command to the printer that is telling it to open up the doors and charge the entire page. Normally the laser is responsible for charging the media. As the media passes over the toner doors it atracts toner particles. Then as the paper continues it rolls past the fuser where heat melts the particles into permanent place. > The power supply board maybe? Perhaps but not likely. If you have a spare you could try it but power supply problems usually result with the machine unable to boot or print correctly, not printing too much as you have described here. > Is there another part you would reccomend I look at?
You could try the old Halfway test just to verify that the problem is coming from teh laser/toner part of the printer. http://www.printertechs.com/printer-troubleshooting/halfway-test Your paper may have somehow gotten a staic charge that opposes the charge of the toner, thus auto attracting all particles in range as it passes over the toner doors. Might want to grab a fresh ream of paper to test and rule somethign crazy like that out. Not very many options left after that.

HP LaserJet 3015 not printing with 10.5.6

I just upgraded from 10.5.5 to 10.5.6 and my HP Laserjet does not print. I removed it and added it back but when I try to print it always gives me the following error when the printer queue is trying to connect:
Printer busy (status:0xe00002e9)
Please help.
HGCali

<Is this because i just upgraded to 10.5.6? </i>
No, probably not. I have no problems printing to my 3015 from 10.5.6.
Is apple going to do something about this?
Doubtful since it's almost certainly not Apple's problem, per se. Make sure you have the latest printer update, HP Printer Update 1.1.1, which should appear in Software Update if you haven't installed it and will probably appear in the "Installed Updates" pane of the Software Update preference. And if course if it's a networked printer you'll want to ping it to make sure that your system is actually reaching the printer.
If you continue to have problems, you'll probably want to take it up with your IT people or with HP. But you can keep an eye on this thread and see if suggestions to the OP would apply in your case as well.

HP laserJet P1006 not working on Windows 10. Please help

HP laserJet P1006 not working on Windows 10. Please help

Hi,
Try installing the windows 8.1 drivers from HP's support site, those are more likely to work.
For any issues clarify your OS version, is it 32 or 64 bit?

Laserjet P2015d not printing

AOA,
I m syed sajjad hussain from Islamabad, Pakistan. My Lasderjet P2015d did not work properly.
Even i installed again in my PC. When send print, it reply as " an error occuring".
Pls give solution as possible.
Thanks
{Personal Information Removed}

Hi , Welcome to the HP Forums! I understand that your HP Laserjet p1006 printer is not printing on Windows 10, and I am happy to help! To verify the printer's hardware is functioning are you able to print a demo page? Printing a Demo Page. In the meantime, please try the troubleshooting steps within this guide, 'Printer is offline' Message Displays and the HP Printer Does Not Print, and let me know the outcome! Thank you for posting, and hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

Invoice SAP SCRIPT is not printing Customer master text.

I was given a SD-invoice# XXXXXXXXX, which has problem with in it's SAP SCRIPT --> is the text is taken from "customer master data head office text" is not printed on the SCRIPT out put.
1). What I don't understand by going to /nvf03 --> by giving invoice number , then how can I view the script output ?
The text is supposed to print in footer ...however the coding inthe FOOTER window is
/: INCLUDE 'Z_FOOTER_SO_4700_INV' OBJECT TEXT ID ADRS LANGUAGE 'IT'
So, do I need to add coing for text of customer master data ?
Any idea about text and field name ?
THANKS IN ADVANCE.

Hello,
To see the output go to /VF03, enter the billing document number but don't press enter. Go to Billing Document in the menu bar, Issue Output to, select a line and do a print preview (if there's nothing there, the doc hasn't been printed before).
To print the text, ask somebody to navigate to where it is in SAP. Double click on it, choose Got -> Header. This will give you all the information you need for the INCLUDE.
The INCLUDE statement you have is for a standard text (trans: SO), not the "customer master data head office text".
Michael
Edited by: Michael Evershed on Sep 26, 2008 10:41 PM
Edited by: Michael Evershed on Sep 26, 2008 10:41 PM

CD Insert with mosaic is not printing, just the text prints....never a probem before. Has this been changed?

The CD insert selection of MOSAIC does not print album artwork, only the song title text. What is wrong? This has never been a problem before.

Hi @simplykateg , and welcome to the HP Forums!
I see you're having print issues. I would like to help!
There can definitely be compatibility issues between a 2.0 USB device and a 3.0 connection port. I'd recommend plugging into a 2.0 port.
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I'd also suggest downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Laserjet 2300n not printing reinstalled drivers says ready but won't print

laserjet 2300 will not print I have reinstalled drivers and it says ready to print, but when i print test page or word document it does not print? anyone have ideas??

Hi steveflash,
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP LaserJet 2300 Printer series is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet 2300 Printer series support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Envelops do not print, but regular text material does print, since upgrading to Yosemite.

I have two HP Printers that connect to my MACBook Pro. HP5520 an HP6510 mutifunction print,scan, copy. I have recently upgraded my operating system to the OS X Yosemite 10.10. Now the print envelop tool does not work. The envelop feeds through the printer but does not print the addresses.
I just upgraded the HP software but note it was the Mavericks version so do I assume correctly that this bug has not been fixed by HP for Yosemite?

Here is the solution: I uninstalled the old version of Microsoft Office for Mac 2011 and purchased a new version, installed, updated. Now word is able to print envelops on my all-in-one. So the issue was a microsoft bug.

LaserJet M125a not printing with Windows XP SP3

Hi everyone.
Today I bought new printer. I wanted instal this printer on my old pc with Win xp but during installation appears window with warning " software for this device: "printer" has not passed compatibility testing with windows xp system". Nonetheless installation is going to end. After all I can only copy and scan. When I try print something, it looks as if the print process is working, nothing happens and there isn't list of not printed items. I have installed printer on my laptops with Win 7 and Win 8.1 and everything is fine.
Sorry for my grammatical mistakes. I have to translate this from polish
I hope someone can help me solve this issue. A lost all day to find any solutions ;/
Regards
Karol
This question was solved.
View Solution.

Hi @Karol_szc ,
I see that you are experiencing issues installing the printer on the Windows XP computer. I would like to help you out with this issue today.
I have provided a document to check your system to make sure if does meet the system requirements.
Windows XP: 'Your System Does Not Meet the Minimum System Requirements' Message Displays on the Comp...
Check your version of .Netframeworks. How to Check Which Version of Microsoft .NET Framework is Installed in Windows?
Run the Windows updates to get the most up to date one installed.
What version of Internet Explorer are you using?
IE is integrated into Windows and is part of the Windows updates.
I suspect you need IE 7 at least. I believe this is because HP software piggy backs from Internet Explorer.
If you need further assistance, just let me know.
Happy New Years!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet 2100M not printing with 10.6

Hi,
I've been trying to print a document all evening on my HP Laserjet 2100M with the HP 100 Mbps network module. I've tried it on both my iMac and my MBP, no help there. The printer program is saying that it is sending the job to the printer, but the light does not even blink on the printer.
Any idea?

Hi Andrew, I'm back home!
First I did a Telnet to the printer address and confirmed it had the right settings. All looked perfect to me.
===JetDirect Telnet Configuration===
Firmware Rev. : G.08.49
MAC Address : 00:30:c1:0b:a5:b9
Config By : DHCP
IP Address : 192.168.1.10
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
Syslog Server : Not Specified
Idle Timeout : 90 Seconds
Set Cmnty Name : Not Specified
Host Name : REPLICATOR
Default Get Cmnty : Enabled
DHCP Config : Enabled
Passwd : Disabled
IPX/SPX : Disabled
DLC/LLC : Enabled
Ethertalk : Enabled
Banner page : Disabled
OK, I reseted the printing system. Then I added my HP LaserJet using the HP Jetdirect - Socket mode (as I always did in preview OS X version). I put the IP address of the printer, let the Queue name empty, Named the printer and the Print Using auto selected correctly HP LaserJet 2100 series. Then I clicked Add. The print dialog tried to "Connect" to the printer for Installable Options. This was taking forever to finished. So I clicked on Configure... and selected the options I knew was there myself.
I tried then printing from Stickies (something simple), it told me the printer was busy. I put it off, then on, and retried and it worked... Try a page from Pages too, working...
Maybe reseting the print system helped, because last week I also put the printer off then on, and the problem stayed there. Tried the same on my MBP, and it worked too! Cannot figure out what I did wrong the first time. Maybe I really needed to print something, and Murphy's Law came in!

HP LaserJet P2015 not printing via network

Hi,
looking for help.
I cannot print via the network on HP LaserJet P2015. It works via USB. When I try to add the printer it is identificable by Bonjour (Nearest Printers). It tries to configure the printer and appears as being active (green dot) but when try to print it says Connecting to Printer but then reports an error message of The printer is not responding.
Any ideas on how can fix ? Thanks in advance !

You can connect to Bonjour printers in Mac OS X, just select the Printer in the Print & Fax preference pane as usual and click on Add

HP Laserjet 3050 Not Printing

I have the HP Laserjet 3050 and as soon as I click print, the printer goes into pause mode. I have removed the drivers, removed the printer from the library file, reset all printers and this problem still occurs. Is anyone else having this issue? Also will scanning ever be supported with this printer?
Thanks!

My HP Multipurpose LaserJet 3030 is working NOT similarly. Deleting the print queue, restartin, reseting the printing system, even updating HP drivers thru Software update (to 2.0) doesn't work. The best I can do is have the print queue say the printer is idle and ready. Driver version 5.3.0 is listed as working on Apple's website, interestingly, this version did NOT change after updating HP Drivers 2.0 thru SoftwareUpdate.
Every time I add a print job to the queue, the printer pauses and won't resume, clicking resume repeatidly I occasionally view a g;ajsglsdflksf USB error, but, it disappears too fast to read accurately. If I delete the print the job from the queue I can then resume the printer. That lasts until the next job is added, putting the printer permanently into "Paused" purgatory!! aka the HP PP syndrome!!

HP LaserJet P1007 Not Printing in Sequence

I Own a HP LaserJet P1007 printer. While printing several pages at a time,its printing in an arbitary sequence. Its creating a big problem for me. How it can be resolved,please suggest me.

<Is this because i just upgraded to 10.5.6? </i>
No, probably not. I have no problems printing to my 3015 from 10.5.6.
Is apple going to do something about this?
Doubtful since it's almost certainly not Apple's problem, per se. Make sure you have the latest printer update, HP Printer Update 1.1.1, which should appear in Software Update if you haven't installed it and will probably appear in the "Installed Updates" pane of the Software Update preference. And if course if it's a networked printer you'll want to ping it to make sure that your system is actually reaching the printer.
If you continue to have problems, you'll probably want to take it up with your IT people or with HP. But you can keep an eye on this thread and see if suggestions to the OP would apply in your case as well.

Hp laserjet P1006 Not Printing everyline of text

Similar Messages

Maybe you are looking for