Hp laserjet p1102 not connect

I am having trouble with my printer. I am trying to connect my Samsung tablet, the printer blue light blinks but I can't connect. The printer is new, so is the tablet.

Hi @pboughen ,
Welcome to the HP forums.
I understand that you are having a problem connecting your p1102 to your Android device.
I would like to help.
The blue light on the printer is the wireless light.
The fact that it is blinking tells us that the printer is not on a wireless network .
The P1102w is USB to wireless setup.
Do you have a Mac or PC on hand to set the printer up?
Setting Up the Printer for a Wireless Network for the HP LaserJet Pro P1102w Printer
Once the printer in on the network, it should be easy to connect the tablet.
If I may recommend, take a moment and set up the printers ePrint feature.
Getting Started with ePrint for the HP LaserJet Pro P1102w Printer
Go into the Google Playstore, search for the HP ePrint app, and install the app.
This will act like the printers driver for the tablet.
You just have to go into the app and then open the document or picture you would like to print.
Getting Started with HP ePrint Mobile Apps
I hope this helps.
Please let me know if you need further assistance.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

HP LaserJet 1300 not connected for more than 1 day

Since Apple came out with the Yosemite printing system, I cannot print wirelessly for more than one day. I have reset my modem, changed the location of my network, unplugged and repowered Airport Extreme, started in Safe Mode, and more.
No matter what I do: I either get: a printer name with a number in parenthese or a long Bonjour number when deleting and adding a printer on my laptop.
Whatever I do, it only works from about 24 to 36 hours. Then when i go to print it says Printer is Not Connected. I can delete and add again, usually it will find the printer, add it, print, and then a day or two later, the printer is not connected again.
But I have to keep redoing this both to my laptop and my wife's, and we have not had reliable printing since Yosemite cane out about October 18, 2014.
Equipment
iMac:
Operating Sysem: 10.10.1
Printer: HP LaserJet 1300
Network: Comcast
Router: Airport Extreme
The only thing I have not done I can think of is reset Airport Extreme. I can do that, but don't know if I will then have additional problems.
This all started with the YIosemite update but at this point I don't know if it is an HP-related problem or a general Yosemite-related problem.
I appreciate any help I can get. Have wasted probably 40 hours over two-plus months trying to get this fixed. When Apple could not fix it back in October, the person referred me to HP. The person at HP Business did not know my printer was supported for Yosemite although his own web site said it was. So that was not much help And after resetting printers, deleting and adding printers, etc., I don't know what else to do.
Thanks for listening.

Did it start not syncing after the iOS 4.2 update?

HP laserjet p1102 not recognized after installation on windows 7 - 32bit

Hello
I need help with my hp laserjet p1102 installation, it's not working after installation.
I get a message say's(usb device not recognized)
can any one here get me a hint please??

ahmed,
What is the exact message? See these
You could also download a fresh version of the install CD. Drivers per OS version
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

HP LaserJet P1102w not connecting to wireless

We have a fairly new printer, P1102w, only three months old. It is now not connecting to the wireless anymore. I've tried to reconfigure the wireless connection but it cannot find my network SSID anymore. I attempted putting it in manually but no luck. The firmware is up to date so that should not be a problem. Any suggestions?

What is the status of the wireless light on the front panel right now??? Power off printer, power off router. Power on router and wait 3 mins. Power on printer and verify it connects to your router. Status of the wireless light now?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Laserjet 2100M not connecting

I recently connected an HP Laserjet 2100M to my iMac (running OS X 10.6.8) and was able to make it work by directly connecting the two via ethernet cable. It took a while to get it working, after finally finding the right driver and IP address.
I only have one ethernet port, and I would prefer to have my router connected to it because my wireless connection has been slow recently. Therefore, I disconnected the printer from the computer and plugged it into my router (Linksys s3500). Internet connection works better but now the printer won't print. The computer recognizes it, saying it's idle, but it won't connect when I want to print something.
I've tried deleting the printer from System Preferences and re-adding it, and that didn't work. I can't enter the printer's IP address in the Network preferences because then it won't recognize the router's IP address.
I'm using driver version 5.3.0 (HP Laserjet 2100 series). This is what worked when I had the printer directly connected to the computer.
How can I get the printer to work through the router?

I emptied the HP folder in the library (as the next respondent suggested) and reloaded the driver package. That did not do it. Another Forum discussion I located in December seemed to indicate that the IP number might be necessary but I was trying to avoid that. I have made some efforts to locate the IP address for the printer without luck. Any ideas how I can acquire it? I have printed the test page and the 2nd test page (pressing go and cancel buttons at the same time) but no obvious IP number appears. There are PCL, PCLXL, and PS numbers listed under Installed Personalities and Options. I thought these might represent IP numbers but the format is different (19980828 under PS for example). This could be written 199.8.0.828 which looks more like an IP format but as soon as I get the 199 down (at least using the PS number), the computer tells me this is an invalid HP IP combination and that I am using third party software and it should not be. I have only used HP software. My suspicion is that the IP number is not on this page.
Another possibility: I noticed that in the HP Printer folder (within the Library folder) that the Laserjet folder only has a file titled hplastjetzjs.bundle in it. Is this file supposed to be expanded?

HP Laserjet 1022 not connect with AirPort Extreme

Previously I connected to my airport extreme with ethernet from my Apple Laserwriter Pro 630. I bought a HP Laserjet 1022 and it connects through the USB port. It does not print. I have installed the HP Laserjet through my Printer Set Up Utility with my MacOS X 10.4.9 system.
What am i doing wrong?

I've no personal experience with your particular printer but these pages may help you
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?&lang=en&cc=uk&prodTyp eId=18972&prodSeriesId=45674&submit.y=7&submit.x=4&lang=en&cc=uk
http://www.ifelix.co.uk/tech/1013.html
Steve

HP Laserjet P1102W not connecting to wireless network

Hi,
yesterday I tried to install my new Laserjet P1102W with wireless capabilities. The first setup went fine and I was able to print wireless from my pc. But when the printer went in sleep mode I had to redo the wireless setup to get it connected.
So I searched for a possible firmware update on the Ducth HP site, found the lastest firmware (20110826) and followed the instruction to upgrade it. But the upgrade took more than 20 minutes, and th lights on the printer didn't blink. So I pressed the power button again to wake it up, printed a selftest page and did see that the firmware was updated.
But then the problems started, the printer only gets a 169. ip address while I've setup the wireless correctly (tried manual and automatic setup) while I expect it to get a 192. address. And ofcourse I cannot print anymore via the wireless connection.
So I tried to find an older firmware to put back on the printer, but with no luck. Also tried to re-apply the latest firmware, but then I get the message that the printer is already up to date.
Is there a possiblility to force the firmware update to run again? Or can I get an older firmware from HP?
Best regards
Rob

I had the same problem, I was able to connect into my wireless network when I installed the printer (using the CD that came with it) and was able to print but when I turned off the printer and turned it back on it won't connect to my computer
and my wireless network. I did the same thing you did reinstall but get that 169 IP address. Believe me I was on the phone with the Geek Squad tech for almost 2 hours and the problem was not solved so he told me to just keep the printer on so I don't lose connection. Same thing with the 1st HP tech support who tried to help me. He even changed something in my internet security but did not solve the problem at all. The second HP tech support worked on it too and finally told me that it could be my router. I have an old Linksys wireless G router so I decided to buy a new router and bought the Netgear N600 WNDR34000v2 and reinstall the printer and everything worked fine. Also before you install the printer driver be sure to uninstall the printer program (go to Control Panel-Programs and Features) and also disable your firewall because it could also cause problems in the installation. Now all my 5 computers in my network are using the printer and I can turn it on and off with no problems at all in printing.

Pls.. Help me about LaserJet P1102 "not wirelles" - Installation Win 8_64bits

Bom dia ..
Eu não consigo instalar a impressora HP Lasejet P1102 "não é wireless" na nova CPU com Win8 64bits que comprei. Alguém pode ajudar-me, pois já fiz varios procedimentos e nada funcionou.
Eu já tentei fazer a instalação via link ou cd umas 4 vezes;
Eu já tentei fazer com o cabo USB conectado e desconectado na CPU;
Eu já troquei o cabo de porta USB;
Eu já fiz sem o teclado e mouse conectado para saber se não existia conflito de hw.
Nenhum das alternativas tive exito. Podem ajudar-me ?
Obrigado
Ricardo Galo

Krissy,
Welcome to the forum !
I can appreciate that you have a lot of things on your mind and some of them we may be able to help you with here, and some may require support that is beyond what we can provide through the forum.
If you are missing driver support for your camera, I would start with downloading and reinstalling the camera drivers from our support site. Here is the page for all the drivers relevant to the B570.
If you are unable to get the camera of other functions of the system working properly, you may want to give technical support a call 877-453-6686 in the US. They can help you get the camera working again and can remote into your system if needed.
Some of your questions may related to some installed programs no longer working as you expect them too. Missing buttons, etc. For this kind of help, we have some support services that may be available for a nominal fee - these are LenovoCare Premium support. The are available by phone or chat, and can also remote into your system to address some kinds of software and configuration issues that are outside the scope of normal warranty service. The number is 877-737-1082.
Sorry to hear about your troubles. I hope that some combination of these support options will help get your system working again the way you need.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

HP Laserjet P1102 print multiple pages - USB connected to Airport Extreme -

Hello,
My configuration is Windows Vista/7 - Bonjour Print - HP LaserJet P1102 USB connected to Airport Extreme.
Everytime I sent a print job - it get printed endless times until I hit "Cancel" on the print queue.
Help anyone..
Thank you very much,
- eagleputt

Hi gingerjedi,
It's normal with your actual Airport and confirm by Apple, but ...
Only If you see your printer in Airport Admin Utility under Printer :
1) Download and install : http://www.openprinting.org/download/printdriver/macosx/foomatic-rip-2008-01-30. dmg
2) Download and install : http://www.openprinting.org/download/printdriver/macosx/gplgs-8.61-ub.dmg
3) Download and install : http://www.openprinting.org/download/printdriver/macosx/hpijs-2.7.10-UB.dmg
4) Repair permissions with Onyx or with your Install Disk
5) Restart your computer
6) Restart your connection with your Printer (Cable-Power-Connection with your Airport)
7) In Prefs Panes, select Printer ( + ) and install a new Printer
8) Select your indicated Printer in the menu choice. If you have a Name for your Airport, give this Name under Place or Emplacement (excuse, i am French) and select HP Deskjet D2400 Foomatic/hpijs (recommended).
9) And click Done
With this Solution, you can just print. All other software possibilities can not run under the Airport. It is normal.
I think all is ok for you.
Message was edited by: thebuzzman

MacBook Air and HP LaserJet P1102 installation

Does anyone know how to download printer drives for a HP LaserJet P1102 (not HP LaserJet Pro P1102) onto a MacBook Air? Would be grateful for tips.

Me too

IE9 Page Setup Not Pulling from LaserJet P1102 Preferences

I am running IE9 on Windows 7 Home Premium with a LaserJet P1102 printer attached. Software and drivers are all current. I also have an Epson SX218 and Adobe Distiller 8 installed as printers.
When the Epson printer is set as the default, any changes I make to the printing preferences of that printer appear in the IE9 Page Setup, including the paper size -- especially the paper size (we use A4 paper here, not Letter), and orientation.
The same is true for Adobe 8 PDF and Adobe 8 PDF Converter -- preferences pass right through to IE9 Page Setup when either are set as the default.
When the HP LaserJet P1102 is set as the default, IE9 defaults to "Letter" and "Portait".
I have tried every possible configuration -- removing all printers, reinstalling just one, reinstalling all, reinstalling in a different order, changing the defaults, changing the preferences, warm booting, cold booting, different computers, and even additional printers from Canon and Epson -- and the results are always the same.
There is something about the HP LaserJet P1102 drivers -- and possibly other drivers -- that is not updating the registry correctly for IE9 to read it and it is therefore falling back to some sort of defaults (which I can't find, either).
It is very annoying that even when I have the HP LaserJet P1102 set as the default and the printing preferences set to A4, I still have to go into IE9 Page Setup and change the paper size to A4 in order to get the output to print correctly.
As a note, I believe the same problem may exist with Word 2007 -- it only prints correctly to A4 when the Epson printer is either the destination or the default. If the P1102 is the default and A4 is the preference AND I print to it from an A4 document to A4 paper, it is automatically shrunk down as if to be fitting on Letter-sized paper. If I set the Epson as the default with A4 paper as the preference and then select the P1102 as the destination with A4 paper, everything prints fine.
I would leave the Epson as the default with A4 as the preferred paper -- which would solve the problem, only we use the Epson for printing on Letter-size labels sheets and don't want to have to constantly change the print settings.
Does anyone have any suggestions as to how I can correct this problem with the HP driver so that printing preferences from the P1102 will properly populate page setup in IE9 (and possibly Word 2007)?

Tom, when you are printing are you setting the printing preferences to match what you are wanting the printer to do? This would be done through Devices and Printers by right clicking on the printer and changing the defaults through Printing Preferences.
Beyond this, if you have already set this up beforehand, the browser you are using might not be correctly interpreting the information and may be sending band data to your machine. I would recommend "uninstalling" IE9 which will replace it with IE8 which has better compatibility with devices and programs.
Let me know! And happy New Year!

Laserjet Pro 400 MFP M425DN Can not connect to HP Web Services

I have a Laserjet Pro 400 MFP M425DN printer on a network running windows 7 and we Can not connect to HP Web Services. When we use the display on the menu it comes back with error "Internal Processing error, try again or check firmware update" We installed the new firmware but still get the same message. IF type in our printers IP address into our browser we get the info on our printer but if we go to the HP web services tap and click enable it trys but come back with a "connection error"
Any ideas?
Thanks
Paul

I just updated my Firmware on this printer today to the latest version dated May 3 2013 and Web Services
worked. Had the same type of problem you had for months and had worked with HP but could never get
Web Services to work at my location with my Modem/Router.
Had tried at other locations and it would work with the old Firmware. But for some reason it did not at my
location with the Modem/Router I was using.
Again the latest Firmware fixed it. I tried all the other solutions that I had found on the internet and non of them worked.

Ipad(4th gen) does not connect to Laserjet 100 color MFP M175nw for AirPrinting

Hi,
I have a problem with Laserjet 100 color MFP M175nw and Airprinting.
Ipad(4th gen) cannot connect to printer for AirPrinting.
Wireless Direct is set on in the printer.
When I choose to connect to printers own wifi network with my Ipad, it can't connect.
(Ipad doesn't show the wifi symbol on top left corner.)
And if I try to print with Safari, it says "AirPrint-tulostimia ei löytynyt" which means in english "No Airprint-printers found".
I have all installations by the guide book several times, but seems that this Airprint simple doesn't work.
Device Configuration show this:
Installed Personalities and Options
PCL6           (20040201)
AirPrint
PCL              (20040201)
PDF              (20040201)
PS                 (20040201)
I wonder why AirPrint has empty value? (what ever this might mean)
Br,
Heikki

Hi,
Thank you for your reply and first action plan to find a quick fix.
Unfortunatelly even though I disabled IPv6, it didn't fix the problem. Also reboot and WIFI restart has been tryed sevelar times without any help. Ipad Safari is still giving me a message "no airprint printer found".
Same problem also when I try to print so that both Ipad and printer are connected to my home WLAN/DSL-router.
I don't see any problems for the printer to connect my home WLAN, both printer and Ipad has received an IP address from the WLAN router.
My router model is Zyxel AMG1202-T10B.
Ipad is updated to it's latest SW version which is 7.0.6. and printer's firmware date is 20131028.
I have no problems printing with my Windows 7 desktop computer which is connected to same network as well.
Windows 7 PC is connected to router via Ethernet. Printer is connected to router via Wireless, not ethernet.
Here is the network settings from HP Device Toolbox:
Network Summary
TCP/IP(v4)
Status (Wireless) Ready
IPv4 Address: 192.168.1.38
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
IP Configured By: DHCP DHCP/BOOTP Server: 192.168.1.1
DHCP Expiration Time: 02:23:54 (Days:Hours:Minutes)
WINS Server: 192.168.1.1
Preferred DNS Address: 192.168.1.1
Alternate DNS Address: 0.0.0.0
TCP/IP(v6)
Status: Disabled
Network Identification
Host Name: NPI08C7AB
Domain Name (IPv4/IPv6):
Domain Name (IPv6 only):
Bonjour Service Name: HP LaserJet 100 colorMFP M175nw (08C7AB)
Bonjour Domain Name: NPI08C7AB.local.
Bonjour Highest Priority Service: IPP Printing
Wired Network Configuration
Status: Not Connected
Hardware Address: 2c:44:fd:08:c7:ab
Link Speed and Duplex Negotiation: Automatic
Auto Crossover: Enabled
Wireless Network Configuration
Status: Connected Wireless: On
Network Name (SSID): Galactica
Communication Mode: Infrastructure
Authentication Type: wpa-psk Encryption: tkip+aes
Hardware Address: bc:85:56:ee:02:d3
Access Point Hardware Address: 28:28:5d:7c:23:a0
Channel: 10
Signal Strength: Excellent
Wireless Direct Setup
Status Enabled
Wireless Direct Printing Name (SSID) HP-Print-d3-LaserJet 100 Wireless
Direct Printing Channel 10
IP Address 192.168.223.1
SNMP
Status: Read-Write Access Enabled
SNMP Version: 1
Set Community Name: Not Specified (Defaults to 'public')
Get Community Name: Not Specified (Defaults to 'public')
Network Statistics
Total Packets Received: 428
Unicast Packets Received: 414
Bad Packets Received: 0
Framing Errors Received: 0
Total Packets Transmitted: 493
Unsendable Packets: 10
Transmit Collisions: 0
Transmit Late Collisions: 0
WS-Print Users: 0
Enabled Features
IPv4: Enabled
IPv6: Disabled
DHCPv6: Enabled
LPD Printing: Enabled
Bonjour: Enabled
SLP: Enabled
WS-Discovery: Enabled
SNMP: Enabled
Show IP Address: Enabled
LLMNR: Enabled
Security PJL Security: Disabled
Please let me know if you need any other additional information.
Br,
Heikki

HP Laserjet P1102 does not print following Office 2013 installation

Hi
The computer was upgraded to Office 2013 last week. Since then the HP Laserjet P1102 printer doesn't work.
It appears that whatever drivers are installed onto the computer are then over-ridden by the printer's own drivers, which creates multiple icons of the printer with errors. None of them work. It also seems to be trying to install as an external CD unit.
We have had all the computer drivers removed and re-installed, we've checked that the correct drivers are installed, we've changed the lead, changed the printer for one of exactly the same model, gone through all the HP on line assistance. Hours and hours have been spent on this problem both remotely and hands on by IT knowledgeable people in the last couple of days and no-one can identify a resolution.
Ideas please?
Thanks

Hi@JG11 ,
I see by your post since upgrading to Office 2013, you can no longer print. I would be happy to help you, but I will need some more information.
Try turning off the Smart Install from the CD: On the Windows computer, go to start, computer, right click the CD for the
printer and left click open in new window, go to util/siutility.exe/HP smart install utility.
Shows printer or PC - select printer.
Then click disable.
(printer has automatic installation feature when connected to a computer by a USB cable)
Are you having this issue from all applications or just the Office 2013 software?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
Run all the Windows Updates.
The application you are using might require the printer to be set as the default printer and probably doesn't have the ability to search for other printers. Close the application. Set the printer as the default printer. From Devices and Printers, right click the printer, left click set as default.
Restart the computer.
Open the application and make sure the application is set to the proper printer name.
Try printing again.
I have provided a URL on issues with printing in Word if the issue persists. How to troubleshoot printing problems in Word.
How is the printer connected? (USB/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet CP1520nw will not connect to network (time out repeatedly)

My HP LaserJet CP1520nw won't connet to my wireless router upon installation, no many how many times I've been asked to connect it to the computer via a USB printer cable. I uninstalled and reinstalled all software, and each time I try to set it up for wireless connectivity by connecting my computer and the printer via a USB printer cable, it gets to 99% installed on the progress bar and sits there until it times out. I suspect one of the follow but am open to other ideas from those more knowledgeable:
1. Is the printer locked onto some old, initial configuration from a previous wireless network that needs to be purged of addresses, etc. before it can accept the new ones?
2. Could my WPA WPA2 PSK AES encrytion be messing it up? Are the modern firmware and updates designed to accept these ? I never have gotten to a screen where it asks for my encyption key or even a WPS pass phrase. What to do if so?
3. Could Church Lady be correct and that it is Satan preventing the installation? If so, what icons does he use to watch out for and will my Norton anti-virus and malware quarantine him to Hell automatically or does it require manual enforcement?

Hi @Marvalina1968,
Welcome to the HP Forums!
I noticed that your HP Color LaserJet CP1520nw will not connect to network with Windows 7. I am sorry to hear this, but happy to help!
First to answer your questions:
It is possible the printer could be locked to an old configuration and needs to be reset.
I don't think your WPA WPA2 PSK AES encrytion could be messing it up, unless you got some really strange characters in your password.
Your Norton antivirus, could possible be causing the installation to fail.
Please take a look through the following guides:
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
Printer Does Not Maintain Wireless Connection.
If the guides do not resolve the issue, please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Disable antivirus software.
Disable any firewall programs. Turn Windows Firewall on or off.
Re-install the software. HP LaserJet Full Feature Software and Driver.
Hope this solves your problem, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Hp laserjet p1102 not connect

Similar Messages

Maybe you are looking for