HP laserjet p1102 not recognized after installation on windows 7 - 32bit

Hello
I need help with my hp laserjet p1102 installation, it's not working after installation.
I get a message say's(usb device not recognized)
can any one here get me a hint please??

ahmed,
What is the exact message? See these
You could also download a fresh version of the install CD. Drivers per OS version
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

HT202274 Password change old password not recognized after 10.9.5 upgrade

God bless you, peace.
macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
1. Tech work replaced optical drive,
2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

Try running the combo update. It fixes more files/data than the App Store upgrade.
10.9.2

Logitech trackball not recognized after 10.5.8 update- LCC 3.1 needed

Logitech Trackman wireless trackball was not recognized after 10.5.8 upgrade. At re-boot, the "searching for bluetooth mouse" screen appeared, pushing the re-set button on the wireless base and trackball did not solve the problem.
Had to plug in my Apple mouse (worked immediately), go to the Logitech website and download the latest Logitech Control Center software for Snow Leopard, dated 9/22/09 (version 3.1)
After install and re-start, Logitech hardware worked perfectly, as before.
Not sure if it would avoid this issue, but I recommend installing LCC 3.1 before you install the 10.5.8 update. That or be sure you have an Apple mouse on hand.

aaron08544 wrote:
Turns out the 10.5.8 update is missing a very important file which is
/usr/X11/lib/X11/fonts/misc/fonts.alias
After I copied one from my Centos 5.2 box, things are finally back to normal.
-Aaron
I have that file on my system and x11 was updated using 10.5.8 combo update. it works just fine.

Camera RAW, file not recognized after import and migration, Aperture 2.1

Hi,
I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
Thanks,
Greg

Hummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
please help! I've got 987 raw wedding photos to process!!
I dont know what to do!

TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine. My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's. On the non-working Ipods, the Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
any help is appreciated. Chris4sail

Hello there, chris4sail.
The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

External hard drive is not recognized after attempt to format

I just got a new macbook and couldn't use my external hard drive because it was formatted on a PC and only allowed me to read the data. I backed up the data on the 250gb hd and then used Disk Utility to erase the hd and format it as "Mac OS extended (journaled)." After beginning, Disk Utility stopped working and showed up as "not responding" in the Activity Monitor.
Now the hd does not show up on the desktop and can only be seen in Disk Utility. If I try to erase again or partition the hd the utility stops responding. If I try to zero out the drive it continues to say "preparing to zero" indefinately. Now the hd is also not recognized by windows except in the windows disk utility, but it does not even give the option of formatting/initializing it, so that is not an option.
Has anyone ever seen anything like this before, or have any idea of something that I haven't tried yet. I really want to get the drive working and have exhausted all the ideas I can come up with. The internet has not provided too many ideas either.
Thanks so much for your help.
Black MacBook Mac OS X (10.4.6)

I have crazy solution to format it to FAT 32, it work a couple times on my several MAxtor, and Western Digital HD. But this is the last resort and if you are not handy and familiar, don't do it.
It happen on my external HD, so I crack the enclosure open, pulled the HD out and attached it as internal HD on a PC after adjusting the jumper to master and make sure no other HD attached to the motherboard. Make sure the motherboard detected (you can see it from bios menu).
Insert a bootable installer disk before XP ('98, ME, or 2000), and start from there until a promt comes, and type fdisk and you delete the old partition and create a new partition and restart once using the disk still and format it using FAT 32.
After that you put it back to the enclosure, and mount it to MacBook as a new HD with default factory format.
If you don't have the installer disk, this might help :
http://www.bootdisk.com/
But if your maxtor still under warranty better talk to them first and they might willing to reformat it for you.
Hope this help your external back and let you use it on your MacBook.

Keyboard & trackpad not recognized after sleep

I have a brand new 2012 iMac with a frustrating problem, neither the keyboard or the trackpad is recognized after the machine has gone to sleep.
Once I unplug the keyboard and replug it in, it is fine.
Once I turn the trackpad on and off it is fine.
I can wake up the computer using the power button on the computer (but I still have to 'reconnect' the keyboard and mouse).
I've tried other keyboards. I've reset the SMC controller. I've reset PRAM.
Ideas.
Brand new system too... nothing funky installed.

Thanks for the note. I neglected to mention that I had already tried that download. I received the "This update is not intended for this computer and will not be installed" message. Didn't see where I could do anything with it further.
I also had the issue of my wireless/bluetooth trackpad not being recognized by the mac side when I re-booted. I've re-installed it but obviously don't want to deal with that every time I re-boot.

IPod not recognized after iTunes 8.0.2 update

I recently updated iTunes to 8.0.2 and now my ipod is not recognized by my mac or iTunes. I went through all the steps (5 r's) including putting it into disk mode and uninstalling/reinstalling itunes, reboot,etc. Nothing works...When I plug in my iPhone using the same cord it is found. It also finds my Apple Tv without any problems. My ipod classic(80g)plays and charges without any issue. Not sure what my next step is...

^Me too!
I have an 80GB Classic too, and it won't sync. It is recognized by iTunes - and it goes through the 'synching' process, But then it just stops and says "eject before disconnecting" but nothing has transferred.
I have an old 1st gen 2GB Nano which still syncs fine.
Also, I noticed iTunes crashed the first time I attached an iPod after the update. I reopened it, but have not been able to sync the 80GB Classic since then. Is this some kind of common occurrence? Can anything be done or do we have to wait for the next update?
Thanks for any help in advance...

External hd not recognized after 8.1 upgrade

my 3 tb seagate external is not being recognized after 8.1 upgrade. plugged in bothe sides of usb ports still no response. lights up when plugged but thats about it. Please help, thanks.

Hi
Is there any specific error message when you plug in your external HDD?
May I know when you upgrade OS to 8.1, this external HDD still attached?
So before your upgrade your OS, this external HDD working fine?
Did you try to attached your external HDD to another PC or laptop?
did you check inside device manager whether your external HDD detected?
may I know the details your external HDD spec and PC spec?
Please provide as much as information that related to this issue

X7 headset is not recognized after Belle update

Hi,
afters Belle update my original headset is not recognized by Nokia X7, can't listen to music or radio. The icon is not visible.
Headset is 100% ok, I tried it on different phone and works fine.
After hard reset is starts working but after unplugged and plugged one again it is still not working. Another hard reset didn't help.
Also tried accessories settings in settings menu - changing profiles and other setting - didn't help.
Any ideas?
Regards

Same problem here too.
Updated to Belle and tried to listen to my music using the original nokia x7 headsets and the music plays only from the speakers too. Tried the headsets on my brother's nokia x7 updated to belle too and they worked fine. Others headsets also didnt work in my nokia x7 but they did in my brother's. I tried to reinstall Belle, restore orinigal settings several times and it didn't work.
Think i just gonna have to sent my phone to the SAT

Disk image of installations not recognized after download

I have tried to install the suggested software that Software Update suggests but once the download is complete, I click on the disk image and I get a dialogue box stating that the software is not recognized.
I tried downloading other software (a game) and I got the same response.

This would tend to occur when the hard drive is corrupted or your OS X installation is dysfunctional. Updates that don't mount may also be due to a failed download that produces an incomplete or corrupted file.
It's possible this is occurring because the new hard drive was not prepped correctly Generally I recommend the following procedure for prepping a new drive:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
Be sure you are using the original OS X installer discs that came with your computer. If your computer originally came with an Intel version of Tiger then you will need a retail copy of Leopard in order to install it on the computer. If your computer came with a version of Leopard previous to 10.5.5, then you can update to 10.5.5 via Software Update or by downloading the 10.5.5 Combo Updater directly from Apple's download site.

Built-In iSight NOT RECOGNIZED after EFI Update 1.1

After updating to EFI 1.1 on my iMac 20 Inch (2,16Ghz) the built-in iSight-Cam is not
working anymore. It´s not showing up in the system profiler > USB Devices.
I bought the iMac last week, switched it on, the cam took a picture on the user account creation,
I applied the EFI-Update and OSX 10.4.8. After that the cam was gone.
I tried everything from resetting SMC, PRAM to reinstalling Combo-Update 10.4.8 ... NOTHING helped !
Any ideas or solutions ???
P.S.: Sorry for my crappy English, I´m writing from Germany !

Here´s a report from MacFixIt.com about this problem:
http://www.macfixit.com/article.php?story=20061211231332862
Built-in iSight not recognized Some users have reported loss of their built-in iSights after applying the iMac EFI Firmware Update 1.1. In some cases, this issue can be resolved by resetting the SMC (system management controller) using this process:
1. From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
2. Unplug all cables from the computer, including the power cord and any display cables.
3. Wait at least 15 seconds.
4. Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
5. Press the power button on the back to start up your computer.
Resetting PRAM can solve a variety of issues As mentioned in our coverage of recent EFI Firmware updates issued for other Macs, a number of potentially serious issues apparent after applying this EFI Firmware Update can be resolved by simply resetting PRAM/NVRAM via the following process:
Shut down your Mac, then start it back up while immediately holding the following keys: Command, Option, P and R. Hold the keys down until the computer restarts and you hear the startup sound for the third time.
This workaround is a good first course of action before exploring more complex fixes. It should also be attempted if your system cannot properly startup after applying the update.

2nd cd/dvd drive not recognized after security update 2014-002

I have a 3rd party CD/DVD drive as my 2nd drive in my Mac Pro and after installing security update 2014-002 it is not recognized by the computer. It does not even show up under "About This Mac" or as a drive in disk utility. Worked fine up until this update. Any ideas?
Thanks

I think I have solved my own problem. After 'restarting' the computer several times with no effect I turned the computer off and let it set for 15 minutes, not that I think the time period had anything to do with it, but upon turning the computer back on the 2nd CD worked fine. I'm sure you folks who are wizards in this can explain why turning the computer off did what restarting did not.

IPhone not recognized after Mac security update

I have a Mac iBook G4 running OSX 10.4.11, and an iPhone 3G running OS 3.0. Up to now they have worked fine together. The phone was charged on the iBook this morning. This afternoon I ran software update on the Mac which installed the latest security update (2009-05, I think). After that, the phone is not recognized when plugged in the USB port. It no longer charges, nor is it recognized by iTunes.
I have checked the following to be sure that the security update is the culprit:
The iPhone with the same cable works fine on another Mac (running 10.5).
Other devices (thumb drive, printer) work fine in the same USB ports.
Finally, I restarted the iBook from the original installation CD for OSX 10.4. When running with the original version, the iPhone is recognized correctly.
So, I am reporting a problem with the security update, and I need to know how to back it off, or how to get it fixed.
Thanks for any help.
NOTE: Software update also installed iTunes 9.0.1 along with updates to Quicktime and Safari. However, none of these apps even have to be running to show that the phone will not charge.

The problem was solved by resetting the System Management Unit, thanks to a helpful phone call with an Apple Expert. On the iBook this required unplugging, removing the battery, and holding the power button in for 15 seconds.
Earlier I tried zapping the PRAM, as someone suggested, but the phone was not recognized. But it turns out it did show up in the System Profiler.
I have no idea why this happened in the first place, right after the software update.

Nano is not recognized after major computer repair

I just got my computer back after major repair (motherboard and both hard drives) and successfully reloaded iTunes. It recognizes my Library and I was able to download some new tunes from the iTunes store. So far, so good. But when I plug in my Nano to update it I get a message from Windows saying the hardware is not recognized and it does not appear in the iTunes Source tray to download the new music. Can some help me please?

Did you re-install your iPod software, as well as download the new updates for it?

HP laserjet p1102 not recognized after installati​on on windows 7 - 32bit

Similar Messages

Maybe you are looking for

HP laserjet p1102 not recognized after installation on windows 7 - 32bit