HP Laserjet P1102 print multiple pages - USB connected to Airport Extreme -

Hello,
My configuration is Windows Vista/7 - Bonjour Print - HP LaserJet P1102 USB connected to Airport Extreme.
Everytime I sent a print job - it get printed endless times until I hit "Cancel" on the print queue.
Help anyone..
Thank you very much,
- eagleputt

Hi gingerjedi,
It's normal with your actual Airport and confirm by Apple, but ...
Only If you see your printer in Airport Admin Utility under Printer :
1) Download and install : http://www.openprinting.org/download/printdriver/macosx/foomatic-rip-2008-01-30. dmg
2) Download and install : http://www.openprinting.org/download/printdriver/macosx/gplgs-8.61-ub.dmg
3) Download and install : http://www.openprinting.org/download/printdriver/macosx/hpijs-2.7.10-UB.dmg
4) Repair permissions with Onyx or with your Install Disk
5) Restart your computer
6) Restart your connection with your Printer (Cable-Power-Connection with your Airport)
7) In Prefs Panes, select Printer ( + ) and install a new Printer
8) Select your indicated Printer in the menu choice. If you have a Name for your Airport, give this Name under Place or Emplacement (excuse, i am French) and select HP Deskjet D2400 Foomatic/hpijs (recommended).
9) And click Done
With this Solution, you can just print. All other software possibilities can not run under the Airport. It is normal.
I think all is ok for you.
Message was edited by: thebuzzman

Similar Messages

Mac Mini won't print via ethernet cable connected to airport extreme

Hi. Thanks for your input in advance. Am about to start throwing things around. I have an Airport Extreme based network which is working fine. The printer is a new HP L7590 which connects to the network with a USB cable connection to the Airport Extreme. Those with laptops and wireless cards are able to print no problem. However my Mac Mini, a 1.25 GHz PowerPC G4 is connected to the printer using a ethernet cable connected to the Airport Extreme. All was working perfectly until I upgraded from Panther to Tiger. I am now running 10.4.11. Now the Mini will not print. The jobs keep stopping. I have removed the printer and try to add it again. The print browser page finds the printer okay and lists it as connecting via Bonjour, but when you tell it to add it, it starts 'searching for new drivers' and then 'gathering printer information' and then it stops responding and I have to force quit it. Any suggestions?? I have already tried all the online mac help suggestions.

Actually it transpires that the G4 laptops are not printing either now.

Sierra Wireless 881 USB Connect. Airport Extreme

I have Been told that you could plug the Sierra Wireless 881 USB Connect into the back of the Airport Extreme OR iMac because it has the same Airport Extreme Capabilities. Your supposed to be able to just plug it it go to your airport settings and create a network, when you do this its just supposed to show up says the Best Buy and Apple Store Employee's!
I have tried this and it did not work for me.
I want to be able to send out a signal from the Sierra Wireless 881 USB and be able to use all 3 computers on the same network!
The Sierra Wireless 881 USB is just a simple and portable USB connect that you would get at the AT&T store!
If anybody has ANY information I would REALLLLY appreciate some feedback.
Thank You So Much,
CGair

The USB device in question appears to be a mobile broadband modem. That is, wireless broadband through a mobile telephone network. This is not the same as a "local" wireless network (Wi-Fi).
I want to be able to send out a signal from the Sierra Wireless 881 USB and be able to use all 3 computers on the same network!
In order to do this, you would typically need a dedicated mobile broadband router with Wi-Fi capabilities (available from a number of manufacturers), and with specific support for the USB modem used.
Alternatively, it may be possible to use a special adapter (such as this example) between the USB modem and the (Ethernet WAN port of an) AirPort Extreme base station. I have not tested this, though.
Jan

Trouble Printing Multiple Pages in Quick Succession - LaserJet P4015x - Networked Printer

Hi,
We are currently experiencing problems printing multiple pages in quick succession. We use a bespoke Microsoft Access Database to run our Sales Order Processing. As part of this software we print 3 part invoices, credit notes etc on different coloured paper. We do this by printing to different printer trays. Originally we tried automating the printer tray configuration through VBA code using one report and changing the print tray as part of the print process but were having problems with Microsoft Access freezing. As result we have resorted to printing 3 different reports straight after each other (using VBA code) but with each report specified to print from a different tray.
We are current using tray 2 (500 sheet feeder - standard A4 paper), tray 3 (500 sheet feeder - standard A4 paper) & tray 4 (500 sheet feeder - standard A4 paper).
The current setup does print a copy from each tray and does give us what we want apart from the whole print process being very slow.
The first page comes out from tray 2 at the normal speed you would expect from a network printer but then we start to have issues.
Sometimes the second page from tray 3 will come out quickly but the third page (from tray 4) will be very slow or both pages 2 & 3 will be slow to print. There seems to be no pattern as to why these are slow. To make matters even worse sometimes it will print correctly and all three pages come out in very quick succession (although rarely).
We are using modern PC's (running Windows XP SP 3 with 2GB RAM & 160GB HDD) and the print command is definately being sent to the printer in quick succession - as far as I can tell. I have tried to setting the printers to print through the server and setting them up to print directly to the printer using the built in print server in P4015x.
The printers are networked to a Windows SBS 2008 server with quad core processors and 16GB RAM. The server is only used as a file and print server and is not under heavy load.
I will also point out that I have tried printing to another HP printer (4250dtn) and it has exactly the same problems.
I have removed advanced printing features from the printer driver setup on the client PC's but it does not seem to make any difference. I have also tried printing directly to the printer rather than spooling.
I have updated the drivers to the latest one on the HP website and still no change.
I would appreciate any ideas any one might have to sort the problem out.

Did you ever solve this?
I'm doing the exact same thing: three print outs in succession to a specific tray on a network shared printer and occasionally getting a MS Access printing error 2212 counldn't print you object. Printer setup is saved with the reports one for each printer tray.
I'm printing from bespoke MS Access 2002 application using runtime to HP LJ 4100 on Citrix terminal server session.
Any info you have would be appreciated.

Trouble printing multiple pages with HP ENVY 5531

I am printing wirelessly from a Windows 8 machine. If I only print one page it works fine every time. If I try to print multiple pages then on the 2nd or 3rd page it always cuts off the bottom portion of the page.
There was another post that had a similar problem but the problem went away when they connected up the USB cable from the computer to the printer. I need to print over wireless so that isn't a good solution for me.

Hi,
Try following the steps below and check if that may help:
- Open the HP software by clicking the HP ENVY 5530 icon within the Desktop or the Start Menu, then click the Printer Home Page (EWS) link.
- Click the Network tab.
- Depending on your printer model click on Networking and then on Network Address (IP) or click on IPv4 within the active network connection type.
- Click on Manual IP , and then click Suggest a Manual IP Address . A manual IP address, Subnet Mask, and Default Gateway displays.
*Be sure to take a note of the IP address and Confirm the changes, then close the EWS page.
- Click the HP ENVY 5530 icon within the Desktop or the Start Menu and click the Utilities tab, then click on Update IP Address.
- Type the manually configured IP address, click on Save and confirm.
- Open the control panel and go to Devices and Printers.
- Right click the HP ENVY 5530 icon and select Printer Properties.
- Open the Ports tab.
- Click the Add Port button, select Standard TCP/IP and click on New Port.
- Follow the steps by typing the manually configured IP address and confirm the changes.
Now try printing and check if the issue been resolved.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp deskjet 960c won't print multiple pages

I am using Mac OS 10.5.8 with a hp deskjet 960c. Over the past few weeks the printer no longer prints documents with multiple pages from Preview or Excel. It will print the first page from these two programs but stops there. It still prints multiple page documents from Word and Acrobat Reader. I have no issues when using a different printer. I have uninstalled and reinstalled the printer multiple times. Any ideas?

Same problem with HP6940. USB connection.
Also reinstalled drivers.
HP4050N has no problems on network.

Business Inkjet 1200 will not print multiple page jobs

Product Name: HP Business Inkjet 1200
Product Model Number: C8154A
Product Serial Number: TH49M1403W
Service ID: 15148
Firmware version: 20041001 MMR2016W
Regulatory Model Number: SNPRC – 0401 – 01
Date: Sept 22 2004
HP Business Inkjet 1200, XP SP2, connected via Draytek 2710n router USB port will not print multiple page jobs. Will only print 1 page pdf, <3 page word docs.
Produces error - 'this document failed to print'
Works fine printing multiple page jobs from other PCs on the network. Other PCs are configured same.
Configured to use TCP/IP port 192.168.1.1 (router/gateway IP), LPR, Queue "p1"
HP Printer Diagnostic Utility shows no problems.
Tried:
Remove printer and drivers and reinstall. Cleaned temp spools folder. Checked amount of disk space, page file, ram. Reboot variously router, printer, PC. - No luck.
Any response much appreciated, thanks in advance.

I can't print my complete e- mail, only the first page. i have several pages of mail to print with all of the headers but am not able to do it on hotmail. it seems like i was able to do it before. it is import that all of these print because of current issues i am dealing with .
Thanks, Ron

My HP Officejet J6480 All-In-One has started printing multiple pages.

All of a sudden my officejet J6480 printer is printing multiple pages every time I print. I've made sure it is saying only 1 copy, but it still continures printing the extra pages.

Disconnect the power cable and the usb cable from the computer. Restart both the printer and the computer. Clear the print que. Fan all the pages in the printer. Power on the printer connect the usb cable and try printing again. Happy Printing
The HP Print and Scan Doctor will guide you through troubleshooting your network printer setup and connectivity problems. It also provides you with a wealth of information regarding your network and, in some cases, automatically fixes network connectivity issues.
The HP Print and Scan Doctor runs on Windows XP, Vista, Win 7, and Win 8. You will need administrator privileges in order to run the utility.
Get it here: HP Print and Scan Doctor
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Used to be able to print multiple page pdf files on my HP 7310 all in one and then it stopped and would only print the curent page. This is tedious for long PDF docs. I am on 10.6.8 .

Used to be ablert to print multiple page pdf files on my HP 7310 all in one printer and now I can only print the current page and therefore it takes forever printing them one by one. I am in version 10.6.8. Tried printing as image using the advanced click and that did not work either. I have Adobe 9.0 reader installed.

I tried this earlier, and I tried it again today. Both times it said "Software Missing!" and "HP Software required to connect to your printer over the network could not be found on this computer." But when I tried to install the software (AIO_CDB_Net_Full_Win_WW_130_141.exe, which I downloaded from HP's web site), it wouldn't install, as described above. In the diagnostic utility, I clicked "skip", and it said "Connection Verified!", and "The printer is connected to the network and the services related to the network connections have been verified and reset to a normal operating state. Everything appears to work fine at this point. Please doa test print to verify that the issue is resolved or click Skip to move to the next step." I clickedthe "Test Print" button, and immediately it popped up a box that said "Test Print Failed."
I tried again to install the HP software, and it installed, detected the printer, and asked me to select it. I selected the printer, clicked "next", and it did its network diagnostics. Then it said "Problem(s) found with your network" and "Problem(s) may exist with the network functions of your printer . . ." I continued the installation without connecting to the printer. Then I ran your network printer diagnostic tool again, and got the same result - "HP Software required to connect to youir printer over the network could not be found on this computer."

Trouble printing multiple pages, not multiple images per page

I have just upgraded to PS Elements 10 and am having a challenging time printing multiple pages of the same document (image). These are labels that will be run, so we do 300 of the same image at a time, one per page (label). From the open Elements .psd file I choose print and set the printer settings, and then choose the amount of labels to print. No matter what number I put in for the Print X copies of each page, it still only prints one. When I convert it over to the organizer it seems to work with printing multiple copies. Having to move each file over especially if we are just wanting a quick test run is very time consuming and troublesome. It seems like there should be a simple fix that I am missing in the Elements program.

Hi,
Try following the steps below and check if that may help:
- Open the HP software by clicking the HP ENVY 5530 icon within the Desktop or the Start Menu, then click the Printer Home Page (EWS) link.
- Click the Network tab.
- Depending on your printer model click on Networking and then on Network Address (IP) or click on IPv4 within the active network connection type.
- Click on Manual IP , and then click Suggest a Manual IP Address . A manual IP address, Subnet Mask, and Default Gateway displays.
*Be sure to take a note of the IP address and Confirm the changes, then close the EWS page.
- Click the HP ENVY 5530 icon within the Desktop or the Start Menu and click the Utilities tab, then click on Update IP Address.
- Type the manually configured IP address, click on Save and confirm.
- Open the control panel and go to Devices and Printers.
- Right click the HP ENVY 5530 icon and select Printer Properties.
- Open the Ports tab.
- Click the Add Port button, select Standard TCP/IP and click on New Port.
- Follow the steps by typing the manually configured IP address and confirm the changes.
Now try printing and check if the issue been resolved.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Moving printer from direct USB connection to network

I am trying to move my printer from direct USB connection to the network by using my NAS' print server. I see it fine in trying to setup the printer, but the printer model does not show up as an option. How do I get it added? It is an HP photosmart 7350. Thank you in advance for any help. --Jeff
Dual 2 GHz powerPC G5 Mac OS X (10.3.9)

Hi kayc_89_07,
If you still have the printer CD you can re-run and use the USB to wireless setup from there. If not, then you can manually add the printer. What operating system do you have?
You have to make sure first that your printer is connected wirelessly. You can print a Network Configuration Page from the HP product control panel. The page includes the product IP address, and MAC address as well as the product network status. Follow these steps to print the information:
On the HP product control panel, press the Wireless button ( ). The Wireless Menu displays.
On the Wireless Menu, press the button ( ) next to Print Reports .
The product prints a Network Configuration Page
Let me know so I can assist you further...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cheers!
* If this post has helped you, the White Kudos star on the left is a great way to say thanks!
* Please mark Accept As Solution if it solves your problem so other users can benefit as well.

How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one. Now, however, with my Ipad version 2 I can no longer get this to work. Can anyone help? Thanks.

Hi,
HP do not provide any USB connection solution for iOS.
As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
http://www.activeprint.net/support/
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Print multiple pages on one page in Preview?

I tried to print a PDF in OSX Lion and I was unable to find the option to print multiple pages on one Page. Instead there is an option to print multiple copies of pages on one page. Does anybody know where I can find the old option from (as in Snow Leopard, Leopard, Tiger..)? (See screenshot.)
Thanks!
roboter

Look under the "Vorschau" menu for the Layout menu, and then choose "Seiten pro Blatt."
Hope this helps.

How do you get rid of white space when you are printing multiple pages to one sheet of paper?

How do you get rid of extra white space when you are printing multiple pages to one sheet of paper? When printing multiple pages to one sheet of paper Acrobat won't let you select the "zoom" for printing.
Thanks

Take a look at Quite Imposing.

How do I print multiple pages (2) to one A4 page?

Hi folks,
How do I print multiple pages (2) to one A4 page (as you can in a PDF) ?
There is no option when I try to print & I have checked advanced etc. I have tried opening as a PDF. I have tried printing to PDF but it won't allow.
Any ideas or suggestions would be greatly welcomed - I don't fancy printing the whole 188 pages, but I need them all!
Thanks,

Hi Chris,
Try this, and if you have any trouble get back and we'll trouble shoot, but I think it will work for you.
Open System Preferences.
Select Print & Scan
Click on your printer under Printers in the left pane
Click "Open Print Queue", on the right
The print queue app will appear on your Dock
Open a Finder window containing your files to be printed and select them all
Drag the files from Finder to Print Queue icon in Dock
Regards,
Jerry

HP Laserjet P1102 print multiple pages - USB connected to Airport Extreme -

Similar Messages

Maybe you are looking for