HP Laserjet p1102w and airprint

i have a HP Laserjet p1102w (which supports airprint), it's on the same wifi network as my ipad2 ( os 5.0.1), however whenever i try to print from my ipad, it says no printer found, any suggestions?

Seems long to me, but itmwould,depend on the size ofmthe update, network speed, yada yada. I am tryingnto remember the steps,when i did mine, and i just cant. At some point you probably have to turn the printer off, so it can reboot. When it looks like it is done, it should,say so on the panel.
Worst case, when you are tired of waiting, reboot the printer, and see if it now shows up on your padmwhen you try to print. If not, simply trymthe firmware update again.

Similar Messages

IPad 2 to hp laserjet p1102w via airprint.

I wish to print to my hp laserjet p1102w, but my ipad says no airprint printers are available. I am on wifi and everything else works. The hp is working fine.

There are two issues to make this work. One, as you have discussed, you need to upgrade the firmware so the printer is truely ready to handle AirPrint. But there's a second issue that I'm stuck on. How do you get the printer on the wireless network? If you have a wireless router that supports WPS, it's apparently easy, but Apple's routers don't support WPS because it is not considered to be a secure network protocol, despite claims to the contrary.
Apple supports WPA2, which rocks in terms of wireless security, but each device that connects needs to provide the WPA2 password in order to join the network, and guess what? Printers don't have an interface through which you can send a password. My Nintendo Wii does. My iPad does. My iPod Touch Does. All my Macs do, but my wireless printer doesn't.
So, my wireless printer is connected via Ethernet to my Apple Time Capsule and it prints fine from all my Macs, but no go for AirPrint from my iOS5 devices.
<sad face>
And buying a newer printer wouldn't help because none of them connect to WPA2 networks.
<sad face>
So, if you CAN print at home via AirPrint, you might as well prepare yourself to have your wireless network hacked by your teenaged neighbor. It's only a matter of time.

HP Laserjet CP1525nw and AirPrint

I have a brand new CP1525nw which is on the list of supported printers. It has the most up to date firmware available. My iPad is running the most up to date version.
I am unable to print to it with my iPad. A windows desktop can print to it wirelessly. When I try to use my iPad i simply get "No Printers Found"
Have i missed something? Any thoughts or ideas?

Your symptoms sound a lot like my 1525n (non-wireless) regarding AirPrint prior to updating its firmware.
Out of the box (brand new last week) AirPrint was not supported - computers could print to it, but no iPads/iPhones could see it. There was an available firmware update for it on HP's website, though. Applied it and AirPrint sprang to life. Since then there has been yet another update posted, released on 2nd Dec.
What is the date-code for the firmware on your printer? (The "HP Utility" app displays this on the Mac, I'm sure there's something equivalent on Windows). The latest update installs version 2010-11-25.
-- Ah, I see somebody else already asked that! Never mind.
Message was edited by: Mudge

HP LaserJet P1102w and Mac OSX 10.9.5

I'm trying to get a wireless connection on my printer through USB. I have been following all the directions from the video that was posted by HP. When I click on the HTML Config button, the following message appears This page contains the following errors:error on line 6 at column 47: Entity 'nbsp' not defined error on line 10 at column 8: Opening and ending tag mismatch: link line 0 and headBelow is a rendering of the page up to the first error. I do not have a menu like the video shows. Any suggestions?

Hi,That's likely to happen due to outdated drivers. Try following these steps and check if that may help:From the computer desktop, double-click the Macintosh HD icon.Double-click the Library folder.Double-click the Printers folder.Right-click the HP folder, and then select Move to Trash.When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.Double-click the PPDs folder.Double-click the Contents folder.Double-click the Resources folder.Locate your printer in the printer list, and then right-click on your printer and select Move to Trash.When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.Click the Trash icon on the taskbar, click the Empty button, and then click OK to empty the trash. note:By clicking OK, all items in your trash will be permanently deleted from your computer. To delete one item in the trash, click that item to highlight it, and then click OK.On the upper-left corner of the computer desktop, click the Apple menu icon (), and then click System Preferences on the drop-down menu.Double-click Print & Fax for Mac OS X v10.6, or Print & Scan for OS X v10.7, OS X v10.8, orOS X v10.9.In the Printers list, click your HP printer, and then click the Minus button () to delete it.Next unplug the USB, reboot your Mac and run software update as following: Click the Apple icon, then select About This Mac. Click on Software Update, then click the top Store menu of the shown window and click on Reload Page.
Be sure to install any available update. Finally, plug the USB and confirm any prompt to install the latest drivers. Now try launching HTML Config once again and check for any difference. Regards,Shlomi

I have a hp laserjet p1102w and i don´t know how can i get a conection with web site

Tengo una impresora hp laserjet p1102 y no he podido lograr la conección al sitio web,

Voy a necesitar un poco más de información con el fin de ayudar. La impresora está configurada de forma inalámbrica con un router, ¿correcto? ¿Cuál es el mensaje de error que recibe cuando intenta conectarse a servicios web? ¿Qué es la dirección IP de la impresora? Para que lo sepas, estoy usando el traductor de google para responder a su mensaje. Te aconsejo algo de esto por si acaso escrito en el hilo no tiene sentido.
Yo soy un empleado de HP
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

AirPrint with Laserjet p1102w doesn't work

Ok, just bought the laserjet p1102w and got it to work wirelessly with my MacBook Pro. The printer USB is connected to my AirPort Extreme. I installed the latest driver so that AirPrint would work (based on another previous post), but my iPad 3 and iPhone 4S are unable to find any AirPrint printers!
Not sure what to do now. I thought it would be easier than this. Help!

To work with iOS your printer needs to be on the network and not connected to the base station via USB.
There's more information here: http://support.apple.com/kb/ht4356
Many of the p1102's also need a firmware update.

HP LaserJet P1102w & Mountain Lion Wireless

I just bought a brand new HP LaserJet P1102w and cannot connect it via wireless to my Mac at all. I'm running Mac OS 10.8 with the latest software updates. I have already downloaded and installed the latest software and firmware directly from the HP site. I cannot seem to configure the printer to work on wireless, although the HP website says it's supported with Mac OS 10.8.
When I go to System Preferences > Print & Scan > Options and Supplies... > Utility > Open Printer Utility > HTML Config... in order to try and connect it to my wifi network (running on a brand new Airport Express), all I get is the following:
This page contains the following errors:
error on line 6 at column 48: Entity 'nbsp' not defined
error on line 12 at column 8: Opening and ending tag mismatch: link line 0 and head
Below is a rendering of the page up to the first error.
HP LaserJet Professional P 1102wUSB
How am I supposed to use this wireless printer wirelessly? Your website says it's supported but when I have all the updated software and firmware on my printer and my computer, it doesn't work. I'm extremely disappointed in HP at the moment and hope you can provide a viable solution.
Mac OS 10.7 has been out for over a year-and-a-half and Mac OS 10.8 has been out for nearly 3 months now. It's ridiculous and disprespectful to your cutomers to not have proper drivers and firmware available to ensure your prodcut works as you say it should.
I look forward to your solution.
This question was solved.
View Solution.

Hi,
I sorry to hear about the problem you are facing, I truly hope this situation will get resolved shortly.
Please follow the steps below in order to bypass this situation and conect the printer to your router using a temporary direct connection:
Turn the printer Off.
Press and hold both the wireless and the cancel button, and then turn the product on.
Hold the buttons until all the lights blink in unison, and then release the buttons.
From the Mac, click the Wi-Fi icon and select Join Other network.
Click Show network and select the printer's SSID, it should include HP, P1102, Laserjet, etc.
If you're not sure which network name belongs to the printer, print a network configuration page by holding the Cancel button, it will be listed on the right side within the network information.
Allow 4-5 minutes till the ad-hoc connection will be fully established
Open Safari and click the Bookmarks icon (), then select Bonjour.
Double click the printer name, the EWS page appears.
Click the Networking tab, and then click Wireless from the list on the left.
Under Communication Mode , click Infrastructure , select your network SSID from the Available Network Names (SSID) list, and then click the >> button.
From the Security Mode pop-up menu under Authentication , click WEP or WPA/WPA2 . Your selection depends on which Wireless Security Protocol your network uses.
Note: if you aren't sure what security type is used, click the Wi-Fi icon on your MAc and select Open Network Preferences. Select Wi-Fi and click Advanced, within the Wi-Fi type you should see your router name with its security type listed right next to it.
If your network does not have Wireless Security, leave the Security Mode set to Open System (No Authentication).
Type your WEP/WPA/WPA2 key in the appropriate field, and then click Apply
In the confirmation box, click OK , and then close Safari.
From the Mac, click the Wi-Fi icon and select Join Other network.
Click Show network and select your home network again, now both of the devices connected to your home network .
Open Print & scan, click the Plus button and add the printer listed as AirPrint.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP LaserJet P1102w - printer offline - Windows Vista ??

We have a new HP printer LaserJet P1102w and my laptop has Windows Vista. I am unable to print - message is always "printer offline" - can anyone assist with how to fix this issue. I would appreciate any help - we are totally unable to use this pirnter. Thanks!

Hello,
According to the information you provided, it is really difficult to diagnostic the issue. But there are several things may good for you to check:
1. Did the printer work before? If yes, you may seeking what' the difference may lead to this offline issue.
2. How do you connect P1102w to your PC? I suggest that you use USB connection to test
3. If you connect it via wireless, could you double check whether the router working fine?
4. Please make sure the printer is power on and connected to the PC successfully, otherwise "offline" is the accurate status for it.
Hope it helps.
I am an employee of HP but I only speak for myself and not for the company.

HP LaserJet P1102w

I have a HP LaserJet P1102w, and am trying to install it on my iMac with OSX 10.7.4. I follow the install instructions for setting up the printer and at the point where I interact with System Preferences an error page appears when I click the HTML Config button in the HP LaserJet Utility dialog window: System Preferences>Click Print and Scan Icon>Click Open Print Queue... Button>HP LaserJet Professional P1102w Window Appear> Click Utility Tab> Click Open Printer Utility Button>HP LaserJet Utility Window Appears>Click HTML Config... Button> Error Page Appears (see below for message)
"This page contains the following errors:
error on line 6 at column 47: Entity 'nbsp' not defined
error on line 12 at column at column 8: Opening and ending tag mismatch: line 0 and head
Below is a rendering of the page up to the first error.
HP LaserJet Professional P1102wUSB
Thank you.

I am having the very same problem. Can anyone help?

Hp Laserjet p1102w can't install wireless

I'm trying to connect my printer wirelessly to my home network but when the software asks me to connect the usb cable it stops and I get the message "HP Printer Software has stopped working"
My OS is Windows 8.1, the printer is HP Laserjet p1102w and the router is a Hitron CVE 30360

@dluis
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

HP Laserjet P1102w - Right side margin cut off when printing in Internet Explorer 9! URGENT PROBLEM*

Hi,
I have just purchased a new printer (HP Laserjet P1102W), and when I print a web page in Internet Explorer 9, the footer (I set to the URL) does not print at all and the header will print though the right hand edge of my entire web page is cut off (including my top right header - Pages ? of ?).
I always use Print Preview first, and in the print preview it looks perfect. I always tick the box to enable shrink to fit too. Why will it look perfect in 'Print Preview' but yet when it prints, it cuts off the right hand side edge of the page and doesnt print the footer?? I have tried adjusting margins, etc... all to no avail.
I would like to check whether others have this same problem?
I spoke to HP (UK Printer Support) and they said it is Internet Explorer 9's problem. I have left a message on the Microsodt Web forum which you can see here. http://answers.microsoft.com/en-us/ie/forum/ie9-windows_vista/internet-exploer-9-not-printing-header...
I am hoping they may release a patch / hotfix - but this has to be affecting many other users of this printer too? The more of us that complain, the quicker it will get sorted.
Any others with the same problem?
Thanks.

I spoke with Microsoft technical support via phone today. Between us - we seemed to have found the problem.
It's to do with the DPI (the font size) settings in Windows!?
I have mine set to 188% on my Windows Vista mahcine and 200% on my Windows 7 laptop.
From my Printing tests in Internet Explorer 9...
at 100 % DPI – it prints perfectly
at 150% DPI – it prints perfectly
at 200% DPI – the right side of the margin is cut off, and no footer is printed – despite it looking perfect in the Print Preview.
I am using http://uk.msn.com/ as my test print outs.
This indicates when the DPI is changed above 150%, IE9 doesn't print properly – though other browsers like Safari or Firefox do print correctly. This surely has to indicate a bug in either the Windows operating system or Internet Explorer 9?
Microsoft are going to run their own tests and phone me back tomorrow...hopefully with a solution!
Hope this helps any others with the same problem at the moment!
Would be great if HP could provide a soloution asap - surely a tweak to the Printer dirvers will fix the problem?

Wireless - Laserjet P1102w

We have a HP Laserjet P1102w and when I reset it, I'm not able to reconfigure wireless.
When I print a device config page wireless is enabled, not connected and ip configured by = manual with all zeros.
How can I configure the printer to connect the SSID of choice?

Does this help?: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My HP Laserjet P1102W is used over the internet

Tonight my printer started to print. Not my work. Somebody printed over the internet.
Printer is HP Laserjet P1102W and it's connected to my WiFi and it is shared locally.
So how can it be that someone, from tens of kilometres away can accidetly print his work with my printer?
How can I secure that printer that this will never happen again.

Hi K-PAX, welcome to the HP Forums. Have you configured your printer with HP ePrint? HP ePrint will enable you to print from anywhere in the world if you have an internet connection. If you do use it, you can set your account up with restrictive printing. If you do not use it, you can probably disable Web Services. Let me know if you use HP ePrint or not. Here is a general reference document on the feature: Getting Started with ePrint
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Just upgraded to mountain lion and my HP Laserjet p1102W won't connect

Just upgraded to mountain lion and my HP Laserjet p1102W to print (worked fine via USB with Snow Leopard; I never had set it up wirelessly, though had wanted to do so.) HP site said if printer worked with Snow Leopard nothing would need to be done; update of drivers would be automatic within Mountain Lion upgrade. No such luck. My Macbook Pro and HP Printer are not talking to each other. HELP, please!
I have a Macbook pro.
When I tried to print, I was told to get new drivers from HP. HP site says what I wrote above, that I need do nothing if printer worked with Snow Leapord. Also read that a new HP Laserjet would need to be connected only via Airprint. So, I have deleted the printer from the print queue, thinking that might help, but I can't find how to install it via Airprint?? After deleting the printer and having no luck with connecting wirelessly, I tried plugging in USB from printer to MacBook pro, too, thinking maybe that would help, but there is no recognition at all.
What am I missing???
Thanks!
Ani

Csound1 wrote:
John Blanchard1 wrote:
Are you not able to select AirPrint from the menu that lets you select the PPD?
Do you have the latest firmware?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4110396#N222
Airprint is for IOS devices and thus has no relevance to this issue.
Connect the printer to your Wireless Network and use Bonjour to detect nd connect it.
That's wrong. AirPrint is not just for iOS devices. Since HP doesn't provide drivers for this printer, they say to use AirPrint:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03425022&cc=us&dlc=en&lc=en &os=219&product=4110396&sw_lang=

I can't get my HP laserjet p1102w to work with airprint

Hi!
So it seem's that I can't get my HP laserjet p1102w to work with airprint. I got it to send out it's own Wi-Fi signal, and i get in touch with that signal on my iPad 3. But when I wan't to print something out from Pages, then it says that it can't find any airprinters.
I tried to update the firmware several times, but it still doesn't work. Any suggestions to what I can do?

Hey T-racer,
As a work-around you can also use the HP eprint method which is available with your printer. The application (HP Home & Biz) is available for free in the apple catalogue.
You can find more info on it here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03128518&cc=us&dlc=en&lc=en &product=4110396&tmp_track_link=ot_search
It shares many of the same capabilities of airprint but is a different program/feature.
If you have any questions, just ask!
I work with HP.

HP Laserjet p1102w and airprint

Similar Messages

Maybe you are looking for