HP LaserJet P1102w and Mac OSX 10.9.5

I'm trying to get a wireless connection on my printer through USB. I have been following all the directions from the video that was posted by HP. When I click on the HTML Config button, the following message appears This page contains the following errors:error on line 6 at column 47: Entity 'nbsp' not defined error on line 10 at column 8: Opening and ending tag mismatch: link line 0 and headBelow is a rendering of the page up to the first error. I do not have a menu like the video shows. Any suggestions?   

Hi,That's likely to happen due to outdated drivers. Try following these steps and check if that may help:From the computer desktop, double-click the Macintosh HD icon.Double-click the Library folder.Double-click the Printers folder.Right-click the HP folder, and then select Move to Trash.When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.Double-click the PPDs folder.Double-click the Contents folder.Double-click the Resources folder.Locate your printer in the printer list, and then right-click on your printer and select Move to Trash.When prompted, type the Administrator name and Password for the computer, and then click OK. Wait for authentication to complete.Click the Trash icon on the taskbar, click the Empty button, and then click OK to empty the trash. note:By clicking OK, all items in your trash will be permanently deleted from your computer. To delete one item in the trash, click that item to highlight it, and then click OK.On the upper-left corner of the computer desktop, click the Apple menu icon (), and then click System Preferences on the drop-down menu.Double-click Print & Fax for Mac OS X v10.6, or Print & Scan for OS X v10.7, OS X v10.8, orOS X v10.9.In the Printers list, click your HP printer, and then click the Minus button () to delete it.Next unplug the USB, reboot your Mac and run software update as following: Click the Apple icon, then select About This Mac. Click on Software Update, then click the top Store menu of the shown window and click on Reload Page.
Be sure to install any available update. Finally, plug the USB and confirm any prompt to install the latest drivers. Now try launching HTML Config once again and check for any difference. Regards,Shlomi

Similar Messages

  • How can i cancel a password i set in the html config utility for laserjet p1102w under mac osx 10.6?

    After setting a password in the Networking tab of the HTML Config Utility for HP Laserjet P1102w under MAC OSx 10.6, I cannot access either the settings or the Networking tabs again. How can I access them or just cancel the password I set?

    hi,
    I beleive your question has been answered in a different post
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Reset-the-admin-password-on-the-web-pag...
    hope this helps
    Russ@HP
    Say thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution
    (Although I am employed by HP, I am speaking for myself and not for HP)
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++

  • Problems with HP LaserJet 1006 and Mac OSX 10.4.11

    I successfully installed the HP drivers and printed out a document, signed off, and now the print queue goes to stopped without printing any of the queued jobs.
    I've reset the print system, downloaded newer drivers from the HP site, but nothing seems to help at this point. I've included the error log below. Any help appreciated.
    Running a Mac mini 1.83GHz Intel Core Duo with 2GB SDRAM, OSX 10.4.11, build 8S2167.
    error_log:
    +Description: Printer error log+
    +Size: 128.77 KB+
    +Last Modified: 2/24/08 8:57 PM+
    +Location: /var/log/cups/error_log+
    +Recent Contents: ...+
    +I [24/Feb/2008:20:51:37 -0500] Adding start banner page "none" to job 1.+
    +I [24/Feb/2008:20:51:37 -0500] Adding end banner page "none" to job 1.+
    +I [24/Feb/2008:20:51:37 -0500] Job 1 queued on 'HPLaserJetP1006' by 'jjcllhn'.+
    +I [24/Feb/2008:20:51:37 -0500] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 3320) for job 1.+
    +E [24/Feb/2008:20:51:37 -0500] PID 3320 crashed on signal 6!+
    +I [24/Feb/2008:20:51:37 -0500] Hint: Try setting the LogLevel to "debug" to find out more.+
    +I [24/Feb/2008:20:51:37 -0500] Saving printers.conf...+

    Just found an email HP Support sent to me back in January 2008, about this issue
    "Hello Hunter,
    Thank you for contacting HP Total Care.
    There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
    Your issue cannot be resolved until the 10.5 driver is developed and released.
    To sign up for an update as soon as it is available ...click on the link below:
    HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
    http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
    If you need further assistance, please reply to this message and we will be happy to assist you further.
    You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
    For information on keeping your HP and Compaq products up and running, please visit our Web site
    at:
    http://www.hp.com/go/totalcare
    Sincerely,
    Dave
    HP Total Care"
    I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

  • LaserJet P1505n and Mac OSX conflict?

    Frequently (not always), when I print a document from a Mac (OS 10.4.11) to a  Laserjet 1505n, light horizontal gray lines are printed. Some times only the lines are printed, some other times the lines appear as a background on the printed document. This never happens when I print from the Macs to an older LaserJet 1300. Printers are connected to the Macs' USB ports, not to a net.
    I have several Macs and 1505n printers and this combination always produce the unwanting lines problem.  Firmwares and Drivers has been updated to the latest versions.
    What else can I do?  Is this an unresolved MacOS-1505n compatibility issue?

    I can also confirm this problem. We have just upgraded all faculty printers to the P1505... I believe that any word documents made in the previous version will print in horizontal lines.  Once you copy and paste items into new word document on the target computer the problem is gone.  Although this workaround resolves the issue it is an extra step that the teacher of course does not want to make a habit.
    Hopefully an HP or Mac expert can help us.

  • Adobe Reader 9 and Mac OSX 10.5 - FDF Issue

    I have an issue that only happens when using Adobe Reader 9 and Mac OSX 10.5.
    When submitting a form from within a PDF, the FDF that gets sent is completely blank.
    Tested on Mac OSX 10.4 with Adobe Reader 9 - no issue
    Tested on Mac OSX 10.5 with Adobe Reader 8 - no issue
    Tested on Mac OSC 10.5 with Adobe Professional 8 - no issue
    It only seems to be a combination of OSX 10.5 and Reader 9. Does anyone have any clue about the settings of these two and what might be happening?
    Any help is greatly appreciated.

    Mac OS 10.4.11: I could not open pdf docs today (12-24-08), uninstalled & installed Adobe Reader 9.0.0. pdf docs icons changed but open, however cannot open Reader from Applications and get: Adobe Reader
    Version 9.0.0
    Installing/fixing installation
    Then immediately get this error message:
    Adobe Reader could not install correctly.
    Adobe Reader was unable to install a necessary component
    and must quit.
    Any help out there for me?
    Thanks, Tony

  • I am trying to upgrade from Tiger to Snow Leopard.  When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed.  Does anyone know how to correct this (since Tiger doesn't have Time Mach

    I am trying to upgrade from Tiger to Snow Leopard.  When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed.  Does anyone know how to correct this (since Tiger doesn't have Time Machine)?

    http://support.apple.com/kb/TS2986

  • HT201260 my mac mini build is 11G56 and mac osx is 10.7.5 how can i install latest mac 10.8 and above

    my mac mini build is 11G56 and mac osx is 10.7.5 how can i install latest mac 10.8 and above

    Simply purchase Mountain Lion from the App Store and it will begin installation after the download is complete. Note that it's a large download, about 4.5GB, so you should have a good Internet connection..
    However... if I were you, I would just wait another month or so until Apple releases Mavericks - the 'latest' announced version of OS X -> http://www.apple.com/osx/preview/.
    No need to pay for two upgrades in a months (or so) time...
    Clinton

  • Help in identifying best available development framework and language for native app development for Windows and mac osx desktops through single code base

    Hi Guys
    i am try to identify the right development framework and technology for developing GUI application which can run on windows and mac osx. 
    i am sure that there will be specific handling for both of these os, but at the same time there could lot of code can be same.
    is it possible to fulfill requirements of both these OS's through single code base. As of now i am more experienced with Dotnet C# on windows.
    Regards
    Mukesh Vashisth

    Just wanted to quickly confirm
    before i dive into xamarian.
    Is Xamerian can be Used to build applications for MAC and Windows PC along with mobile devices.

  • How to setup the wireless connection of HP LaserJet P1102w in Mac 10.9.2

    Hello, so I need urgent help to setup my printer (HP LaserJet P1102w) wireless to my computer (Mac 10.9.2)
    This question was solved.
    View Solution.

    OK, here is your support page with everything you need to get up and running.
    http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lc=en&product=4110396
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HP LaserJet p1102w with Mac OS X10.6.8 HTML config issue

    Hello, 
    I have been using this printer for a few years now and have moved house a few times and successfully updated the wireless settings on the printer through HTML config. Lately, in printer utilities the HTML config button does not show up where it is meant to.
    I have installed / uninstalled the latest firmware, software drivers, printers and made sure they were platform specific.
    This is really annoying. 
    Is there old software available for download? it was working fine until the recent update - which I did so I could use the eprint features.
    Best regards
    Costas
    Printer: 
    HP LaserJet p1102w, Firmware datacode = 20130213
    Computer:
    Macbook white, late 2008 model: 2.4Ghz Core2Duo, 4G RAM with OS X 10.6.8

    From the name of the printer, it looks like you have it installed through a USB connection. 
    Here is what I would. First go into “System Preferences” and then select either  “Print & Scan” or "Print & Fax".
    Right click (or control + click) on the rectangle listing your printers and then select “Reset Printing System”.  
    NOTE: This will delete all printers. 
    After you have reset the printing system, let's make sure you have the most recent HP driver package installed. 
    You can download it here: http://support.apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg
    Once you have downloaded the driver package and completed the installation, go into your print settings under System Preferences > Print & Scan. To add the printer, click the plus (+) sign. You should see your printer listed here. If not, click "Add Printer or Scanner." Click the name of your printer and then click "Use:” box.  Make sure that says the name of your printer and not AirPrint. Next make sure that the printer "Kind:" is set to Bonjour or Bonjour Multifunction. Click "Add" down in the bottom right hand corner.
    This will add your printer back using the most recent HP print driver available through Apple. Let me know if this helps resolve your issue or not. If it doesn't, let me know I will see what else I can do.
    Best of luck,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How do I get Windows's off my MacBook and Mac osx back on?

    I purchased a MacBook (A1181) off eBay "for parts" but the only thing it needed was a new battery. I turned it on and everything worked fine, only problem is that it's running Windows 7 professional and is password protected. When I contacted the eBay seller they said the Mac was supposed to be wiped clean and they could not help me because it was sold "for parts." I cannot log in to wipe and I don't have any original discs or any Mac osx discs. I want windows off and a fresh copy or snow leopard on my MacBook. PLEASE HELP

    You can use a Snow Leopard retail install disk to erase the drive and install 10.6 Snow Leopard.
    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
    Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
    You can now follow the instructions on the install screen

  • Anyone having problems with AirPrint HP 5520 and Mac OSX 10.8.2

    Hi guys,
    I just bought my new Mini and my second HP Wireless printer.
    For some reason it does not connect to any of my devices. I have installed all updates, added the printer many times to my network etc.
    When I start my HP laptop is does work perfect to print wireless - but I am unable to find the printer with my iPhone, iPad or Mac Mini. Anyone having an idea what to do?
    I also configured the printer on Mac OSx many times..
    Regards!

    You can check the Net log in the Web Console (Web Developer > Web Console;Ctrl+Shift+K) console to see if there are errors with retrieving files.
    You need reload the web pages and bypass the cache to refresh possibly outdated or corrupted files from the server.
    *Press and hold Shift and left-click the Reload button.
    *Press "Command + Shift + R" (MAC)
    See also:
    *https://developer.mozilla.org/en/Tools/Web_Console

  • Photosmart D110a Wireless Troubleshooting with D-Link DIR-655 and Mac OSX 10.8

    Good evening all,
    Apologizes if this has already been posted. I've googled this issue a couple of times, but I still haven't found a solution for this problem.
    I have the Photosmart D110a and I'm running Mac OSX Mountain Lion, and my router is a D-Link DIR-655 and my security is WPA-Personal and the router is running in 802.11gn mode. My ISP is Optimum Online.
    The issue that I've been having is that the printer works wireless when everything has been recently booted up. As does the scanner. However, if it hasnt been used for a while, the printer shows up in the OSX Print & Scan settings page as idle, but when I try to print, the dialog just says "looking for printer" and never finds it, and just says "The printer is not connected" under the item in the OSX Print Queue. Because of this, I have to restart the computer or restart the printer for them to find each other again. 
    I've seen other solutions on here, such as giving the printer a static IP address, and this hasn't worked either. The printer is still accessible with the static IP address, which means it's still got a connection to my network, but for some reason the OS isn't recognizing it or something. 
    It's obvious that the printer works when everything is freshly rebooted, but I still haven't been able to figure out this issue once it's been idle for a while.
    Any help would be greatly appreciated!!
    Errold

    Hi,
    Try following my post below, I believe it might be relevant as the router drops the Bonjour connection:
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/losing-connection-to-airprint-a-few-min...
    I would also suggest updating your router's firmware and check if that may help:
    http://www.dlink.com/us/en/support/product/dir-655-wireless-n-gigabit-router
    For any help with this proccess I would highly recommend contacting Dlink support.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • IPhone not updating due to lack of iTunes and Mac OSX update

    Hello,
    I have an iPhone 3GS running software version 4.1 and am needing to update it to the next version. When I click on the 'update' button when the phone is connected to my MacBook, a window pops up that says 'This version of iTunes (9.2.1) is the current version'. I realize that iTunes needs to be updated as well, but in order to do that I need a different version of Mac OSX. I have an older MacBook and am currently running Mac OSX 10.4.11
    My question is: is the only way to update my iPhone at this point to purchase the OSX Leopard 10.5? I seem to be caught in a dilemna of not having the most up-to-date software on my computer, but I wish it didn't effect my iPhone performance.
    Any information would be helpful. Thank you!

    You can upgrade the MacBook directly to Snow Leopard for $29.00
    <http://store.apple.com/us/product/MACOS_XSNGL>

  • Safari 3.1. and Mac OSX 10.5.3

    Hi everybody,
    I accidentaly dumped Safari from my system because I never used it and I didn't like it very much. anyway, I am using Opera but to set Opera as my default Browser I need Safari to change this setting. So I downloaded the new 3.1. Safari version but wasn't able to install it. I got the message that I need Mac OSX 10.2. or newer (wich I already have). So I tried to install the Tiger version as well (out of curiosity) but it didn't work either. Afterwards I was browsing through the threads in this forum and tried all the other suggestions I found, like:
    Installing the Safari 2.1. version from the install disk that came with my PBP. I was able to install it but when I tried to launch it I got the message that I cannot use this safari version with my Mac OSX version. And Software Update doesn't mention any Updates for Safari although an older version is installed.
    After that I downloaded Pacifist, repaired my permissions with disk utillity, re-downloaded the Safari 3.1 package and tried to install it via Pacifist. The .pkg file was a zero-byte file and whe I marked every file in the package, and clicked on the install button it seemed to work. I was asked for my admin password and wether I want to replace all the files connected to safari. I said yes (like mentioned in another thread in this forum). I quit Pacifist, logged out and in again but Safari is still missing. If I search for safari using spotlight, the only thing that shows up is the .dmg file.
    Does anyone have further suggestions??? I'd really appreciate it.
    I am really annoyed about all that and I don't understand how Apple can release a new version of their browser wich is incompatible with their new MAC OSX version...

    Try this:
    Go to /Library/Receipts and look for an item named Safari311Upd.pkg or something similar, and Trash it (don't empty the Trash yet).
    Decompress the Safari 311.dmg file by double-clicking on it. When it's done, open the mounted disk image (if it doesn't open automatically) and drag the pkg file to your Desktop. When it's done copying, close the mounted disk image.
    Launch Pacifist and open that package that's on your desktop. Click once on the top package icon in the Pacifist window and then choose Install from the menu, and be sure to replace all items related to Safari that it may find. When it's done, try launching Safari and post back with what happens. If everything is fine again, then you can Empty your Trash.
    As for Apple releasing a version of Safari that's not compatible with 10.5.3, that's not the case at all. It is entirely compatible; the fact that the OS is claiming something that doesn't make sense to you is not an indication that it doesn't work or isn't compatible.
    Mulder

Maybe you are looking for