Hp laserjet p1102w networked printer shuts itself off

Hi, I have a networked (not wireless network) printer, which is plugged into a computer that is always on. However, it shuts itself off randomly, even though I have set it to never do so. This means that users must walk over, turn the printer on, and occasionally restart their computers before they are able to print, which sometimes causes them to lose work. Occasionally the users will also receive a message like:
The printer spooler on the server was not responding
Which means someone must reset the server spooler before it will print. 
I have also set it to go into power-save mode at the longest interval, one hour, but it frequently goes to sleep within minutes of a print-job, often sparking the above issues. 
If there is anything that I can do further to keep from forcing the users to constantly turn it on, or to keep from having to restart the spooler every day, that would be great.
I am working with machines using Windows 7 and 8, and with a Windows Server 2012.

I got to this screen by going to the web interface by typing the printer's IP address into a web-browser's address bar.
Sorry for the delayed response. I will do my best to assist you when I get home.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Similar Messages

  • I have a Photosmart C6180. "Improper Shutdown" comes up and then the printer shuts itself off

    An "Improper Shutdown" message started appearing.  Right after this happens the printer shuts itself off, and then starts up again.  The message reappears, and the same cycle happens again.  This continues without stopping.  Pushing any button except the on/off switch makes the same thing happen.  Pushing the on/off switch right at the moment that the printer starts up, causes the printer to shut off, but as soon as I start it up again, the same message reappears and the cycle starts again.

    maxbob,
    Click this link to go to a page where others found a solution for the same issue you are having and the same printer. Be sure to check out all the posts on this thread as it looks like there were a few different suggestions that worked. Hope this helps.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Satellite U400-14B shuts itself off and now it wont start up

    Hi
    just got a new Satellite U400 this week.
    Was working perfectly the first few days, then last night, it just shuts itself off and now it wont start up.
    I press the on button and the row of lights next to it light up, but nothing happens I dont even get as far as the Toshiba screen.
    I have tried many things. I left it plugged in overnight, tried taking the battery out and no result as of now.
    The little led lights on the bottom indicate that there its plugged in, the battery is white not orange, when pressed they all light up again only for a split second.
    The only thing I can liken this too is when a car wont start and you keep turning and turning the key, well in this case pushing a button, and nothing happens, the fans dont whir or anything...
    help please...

    Has extra Memory (RAM) been installed? Try removing one Memory Module and try a different Memory Slot.
    If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.

  • IPhone constantly shuts itself off randomly after 3.1.2 upgrade

    So I decided to upgrade my iPhone 3G to the newest software when it was first available and now, inconsistently, it has been shutting itself off.
    All I would do is lock the phone, such as after sending a message, and place it in my pocket. When I check it again, I realize it will not turn on, and have to fully power on the thing.
    Is this a normal problem? What can I do? Should I downgrade? Is that even possible?
    I would just like my iPhone to work like it should, all help is appreciated greatly.

    How can I set it as a new iPhone? The last time I reset all the settings and plugged in my phone, all of the information synced itself very quickly, I didnt have an option to restore as a backup or set up a new phone.
    You seem to be confusing reseting the settings and restoring the phone. See this Apple support article - Restoring your iPhone... section. (This is also clearly described in the User Guide - bookmarked in iPhone Safari):
    http://support.apple.com/kb/HT1414
    I aslo recommend disabling automatic syncing when connecting your phone. This can be selected on your device summary page or set globally for all devices.
    Preferences > Devices > Prevent iPhones and iPods from syncing automatically

  • LaserJet 2550n network printer on XP host PC, can't install Windows 7 client laptop

    Have Color LaserJet 2550n network printer connected to XP host PC. I can't install  Windows 7 client laptop for printer. The wireless network is fine, I can access documents back and forth, merely the printer doesn't work and there's no way to download 64bit drivers for this printer from HP. 

    Resolved, not solved. 
    I talked to HP product support. The Officejet Pro 8500 A910 will not install on Windows XP (at least the Home Edition) when networked through a router. It will install through USB. I uninstalled the program and reinstalled it with only USB connected to clean out all the network printer/scanner information. Product support claimed it would install through an ether net cable connected between the printer and computer but this does little good if you need internet access.

  • Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

    Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
    I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

    This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Problem with Lion 10.7.3 with hp laserjet 3600n network  printer

    Hi
    Problem with Lion 10.7.3 with hp laserjet 3600n network  printer
    Guys i am having a mad day with this new OS and some network printer none of them work with new LION,The software for this printer is currently unavaliable. Please contact the printers manufacturer for the latest software, i need the drivers for this, please give a hand with this issue
    Best Regards

    Exactly the same infuriating problem we and many others get with OS X from 10.6 on when Apple dropped Apple Talk.
    Having spent days fighting to get drivers that will run our older laser printers like HP5000, 5100, 2100, 2200 and 4MV, we came up with a simple solution:
    We use an iMac running 10.5.8 as a print server. All the 10.6 upwards Macs on the same network will see and add the printers immediately through the shared older (Apple Talk) iMac.
    Cheapest and simplest option really .... it'sannoying that a brand new Mac can no longer see existing network printers without complex investigation and trying various downloads.
    Answer is simple and cheap if you happen to own a 4 or 5 year old Mac with an OS lower than 10.6 which still has Apple Talk.

  • Today I was shopping and I went to check the time on my Iphone but it had shut itself off for no reason and now it won't turn back on. What should I do?

    Today I was shopping and I went to check the time on my Iphone but it had shut itself off for no reason and now it won't turn back on. What should I do?

    It could have powered off. Try holding the sleep button down for a few seconds until the apple logo appears to restart it

  • My computer has been acting weird lately.  Shuts itself off, the mouse goes off in all angles, does not go into sleep mode sometimes and instead shows on a gray screen definitions of words in 3" letters!  Do I have a virus?

    My computer has been acting weird lately. Shuts itself off, the mouse goes off in all directions, does not go into sleep mode sometimes, instead shows a gray screen with word definitions in large 3" letters that continuosly flows across the screen.  Do I have a virus?

    Doesn't really sound like a virus.
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    How many of these you can answer...
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab, are there a lot of Pageouts?

  • My phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is gone

    my phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is not salvageable? thank you so much in advance for your help!

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then see Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Note.  Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

  • New mac pro is shutting itself off

    Newly installed Mac Pro running 10.9 is shutting itself off. how do I prevent this?

    Launch the Console.app in /Applications/Utilities/, select the system.log, and see if there's anything in it that could be calling for the shutdown.

  • Why does my nano iPod 7gen shut itself off during a pause when running

    I am using the nano ipod 7th generation and nike plus. It  shuts itself off if I have hit pause during a run while taking a break. This is very frustrating because I have to start my run over, it also shows up as two runs in one day. How can I fix this?

    I usually hit the pause. I have tried putting it to sleep as not to bump the resume workout on the face. This doesnt help either. After a few minutes when waking up the ipod it shows the nike screen and I have to start a new workout.

  • Is the MIFI6620L supposed to shut itself off if you don't have a device using it and you are not currently charging it?  I am having to push the on button to restart it everytime I want to use my computer or tablet.  I don't want to leave it plugged in al

    I have had the MIFI6620L for less than a week.  It keeps shutting itself off, and I couldn't find any mention of this in the user manual.  Perhaps it is a battery saving feature, and not a problem with the unit?  This is happening after the battery is charged and I have the unit disconnected from the outlet.  Thanks.

    Yes that is correct.  Jetpacks will power themselves down after a default amount of time to preserve battery life.  This feature should only be happening when there is no activity on the Jetpack.  If you have devices connected it should remain online.
    As a Jetpack owner it is a good idea to build a habit of powering on and off your device on a regular basis.  This will help you keep your Jetpacks connection to the towers fresh and less prone to disconnections.  The best way to use a Jetpack is to power up, consume data and then power down until next time.

  • My iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?

    my iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?

    Your iPHone is designed by intention to shut off when there is a reason for the softwarer to believe that danger is immenent to the hardware. This can occurr if the software is running applications that have been corrupted due to all types of different scenarios. My best advice to you would be to restore your device back to default manufactures settings and do NOT restore the current backup of the IOS program currently running.
    If this corrects the problem with your device intermittently restarting you will then know you have had applications there were corrupted on your device. Once you are convinced there are no issues with the hardware of your device you then are free to begin downloading software apps that were earlier on the device.
    Good luck.

  • My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.

    My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.

    Try SMC Reset (unplug it from the back of the computer for 10 seconds then plug it back. in)
    Try PRAM Reset Cmd + OPtion + P + R on start up.
    Try safe boot - hold down shift on start up.
    Try booting to install dvd (C on start up) or recovery hd (CMD + R) and using disk utility to run a verify and repair. If you still can't boot after that reinstall the operating system. If you can't find the disc or it wont boot to the disc.
    Try single mode which is cmd+S on start up. It will open with a terminal looking window in the terminal. type in /sbin/fsck -TL. If it returns *system has been modified* continue to type that command in until it comes back with macintosh hd seems to be ok. If after 5 tries it still gives you system has been modified. You may have to replace the hard drive.

Maybe you are looking for