HP Laserjet P1102w - Right side margin cut off when printing in Internet Explorer 9! URGENT PROBLEM*

Hi,
I have just purchased a new printer (HP Laserjet P1102W), and when I print a web page in Internet Explorer 9, the footer (I set to the URL) does not print at all and the header will print though the right hand edge of my entire web page is cut off (including my top right header - Pages ? of ?).
I always use Print Preview first, and in the print preview it looks perfect. I always tick the box to enable shrink to fit too. Why will it look perfect in 'Print Preview' but yet when it prints, it cuts off the right hand side edge of the page and doesnt print the footer?? I have tried adjusting margins, etc... all to no avail.
I would like to check whether others have this same problem?
I spoke to HP (UK Printer Support) and they said it is Internet Explorer 9's problem. I have left a message on the Microsodt Web forum which you can see here. http://answers.microsoft.com/en-us/ie/forum/ie9-windows_vista/internet-exploer-9-not-printing-header...
I am hoping they may release a patch / hotfix - but this has to be affecting many other users of this printer too? The more of us that complain, the quicker it will get sorted.
Any others with the same problem?
Thanks.

I spoke with Microsoft technical support via phone today. Between us - we seemed to have found the problem.
It's to do with the DPI (the font size) settings in Windows!?
I have mine set to 188% on my Windows Vista mahcine and 200% on my Windows 7 laptop.
From my Printing tests in Internet Explorer 9...
at 100 % DPI – it prints perfectly
at 150% DPI – it prints perfectly
at 200% DPI – the right side of the margin is cut off, and no footer is printed – despite it looking perfect in the Print Preview.
I am using http://uk.msn.com/ as my test print outs.
This indicates when the DPI is changed above 150%, IE9 doesn't print properly – though other browsers like Safari or Firefox do print correctly. This surely has to indicate a bug in either the Windows operating system or Internet Explorer 9?
Microsoft are going to run their own tests and phone me back tomorrow...hopefully with a solution!
Hope this helps any others with the same problem at the moment!
Would be great if HP could provide a soloution asap - surely a tweak to the Printer dirvers will fix the problem?

Similar Messages

  • After Effects CC: When I import .MOD video, the right side is cut off in the viewer.

    After Effects CC: When I import .MOD video, the right side is cut off in the viewer. I've tried everything. Any suggestions?

    I just started using After Effects, so I'm new to all of this. All I can find on the media player is "fit to window".

  • Text getting cut off when printing to PDF from Excel

    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy

    please delete me from your mailing list.  tks.
    Date: Wed, 10 Feb 2010 11:20:28 -0700
    From: [email protected]
    To: [email protected]
    Subject: Text getting cut off when printing to PDF from Excel
    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy
    >

  • Brochure template right-side edge gets cut off when printed

    its horizontal set-up, 8.5x11.0. but on both my printers (both HPs) the right edge gets cut off. how can I manipulate the doc to a smaller size without making the formating go cattywampus?
    comments are hidden (that helped a little)

    With my DeskJet there is an option to "scale down" a document to fit the page. Do yours offer that?
    Also, I apologize if this idea is too hokey, depending upon the nature and extent of your printing project, but would it be acceptable to set up your printer for legal-size paper and then trim the hardcopies?
    MacBook Pro   Mac OS X (10.4.9)  

  • Opened a .ai file, found that left and right side are cut off (landscape vs. regular the issue?)

    Information all in the title.  I open a .ai file and the left and right sides of the image are cut-off based on the "page" box

    Did you open it in a lower version?
    It looks like you opened the PDF part of the file instead of the AI part.

  • Notes cut off when printing, issue with margins

    When I print a slide with notes, the notes complete cover the width of the page, flush left and right. My printer cuts the margins automatically (not a bleed), so those portions of the text in the notes gets cut off.
    Any way to control the margins, left and right, when printing notes from Keynote?

    Keynote print layout is a bit of a mess, and is well commented on by users, it prints differently than previous versions, eg  in handouts the slide image is much smaller than previously, in grid, the slides are off the printable area on the left.
    We are hoping this is fixed in the round of scheduled updates.

  • Left side of reports are being cut off when printed.

    The leftmost character is being cut off some reports when printed. I have added the following to the registry on the report server but it still is cutting off the the left side of some reports.
    REPORTS_ADD_HWMARGIN = YES
    I am also getting a blank page after each printed page.
    Edited by: user1065650 on Jun 22, 2010 11:35 AM

    Any change the OS changed?
    For example we were running 6 and everything was Windows.
    On 10 the Report Server in on Linux and we had to play with the Fonts some to make it work.
    We change the uifont.ali file
    Its a long shot but in that file under these sections here what I have it it helps (Please make a copy first)
    In the file /u01/app/oracle/product/midtier/guicommon/tk/admin/uifont.ali there are several issues.
    First under “Mapping from MS Windows”
    # Mapping from MS Windows
    #Arial = helvetica
    #"Courier New" = courier
    #"Times New Roman" = times
    #Modern = helvetica
    #"MS Sans Serif" = helvetica
    #"MS Serif" = times
    #"Small Fonts" = helvetica
    Arial = "arial.ttf"
    #Arial = helvetica
    "Courier New" = courier
    "Times New Roman" = times
    Modern = helvetica
    "MS Sans Serif" = helvetica
    "MS Serif" = times
    "Small Fonts" = Helvetica
    The lines in bold have been added.
    Next under “Support for Far Eastern Languages”
    # PDF section can be additionally used to enable Multibyte language support
    # built into Reports. To use this feature with Adobe (r) Acrobat (c), you
    # need to install the Asian font pack available online at the Adobe web site.
    # .....SJIS = "HeiseiKakuGo-W5-Acro"
    # A Japanese report run with Shift-JIS character set is replaced to
    # HeiseiKakuGo-W5-Acro CID font.
    #itcadvantgardegothic = arial
    #"ITC Avant Garde Gothic" = arial
    #itcadvantgardegothic = Arial
    #"ITC Avant Garde Gothic" = Arial
    itcadvantgardegothic = Helvetica
    "ITC Avant Garde Gothic" = Helvetica
    # Required
    #itcadvantgardegothic = Arial
    #"ITC Avant Garde Gothic" = Arial
    The lines in bold have been added
    Finally under “PDF:Subset” everything is commented out.

  • Header cut off when printing

    Whenever I print a document, the header is cut off. How do I fix this?

    One thing you might want to do is to update software i.e. - 10.6.8 is the latest version of that software and now there are more current updates for the OS.
    Did you drag it to the print module as I remember all you need to do is click on print (upper right)
    Make sure you are using the right paper and setting all the way thourout the chain.

  • Image cut off when printing from snipping tool

    I am using the snipping tool that is part of Microsoft Windows 7. Thank you for your help.

    Hey , Welcome to the HP forums! I understand that you are experiencing issues with cut off images on your Windows 7 PC before printing to your Envy 7640. I can help you with that, however I am not quite sure what program you are using that has your snipping tool. If you let me know what program you are using I can make sure we get you pointed in the right direction to resolve this.

  • Photo getting cut off when printing

    I am trying to print a 6x4 photo with my HP Photosmart B8550.  Everytime I go to print it, it cuts off part of the picture.  I created the picture in Photoshop at 6x4 and saved it as a jpg.  In the preview it shows up fine but it is NOT right when it prints.  Please advise.

    StephF wrote:
    I am trying to print a 6x4 photo with my HP Photosmart B8550.  Everytime I go to print it, it cuts off part of the picture.  I created the picture in Photoshop at 6x4 and saved it as a jpg.  In the preview it shows up fine but it is NOT right when it prints.  Please advise.
    The edges of your image will be cut off by a printer that can’t print all the way to the edges of the paper. In order to prevent this, go to the Image Size menu again and decrease the height by 1 inch (thus also reducing the width). When printed, the image will be centered on the paper. You can also choose “Scale to Fit Media” In Page Setup.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Top of image cut off when printed

    I used Aperture to print a borderless 4x6 on borderless paper. In the print preview, the entire image was there (a close-up of Detroit Tiger Verlander with his hat on). Then I printed and the top 10-20% of his hat was cut off.
    But then I ordered an online print through Aperture of the same photo just as I set up to print from my printer. The print was sent to me without being clipped at the top.
    Anyone know why this clipping happens when I print the picture? I quadruple checked all the settings.

    You may want to check on the printer driver and paper size selected

  • How do I get my watermark not to get cut off when printing from aperture?

    When I export an image that I have put my watermark on and print it the water mark gets cut off in the printing

    Aperture should scale watermarks down to fit the exported image.  Perhaps it is scaling to one dimension and not both?
    Have you tried resizing your watermark?  I suggest creating a watermark for each commonly used export size.  I use a wide and not tall watermark, in these widths (in pixels):
    - 320
    - 640
    - 1024

  • Gmail contact manager does not show the whole page, right side is cut off.

    I use Gmail which seems to have few problems with Firefox 4.0, however, when using the Contact Manager the page runs off the screen and there appears to be no way to adjust the page size in Gmail to fit the Firefox layout. Is there a fix for this?

    Thanks. I had already found the same solution you found. I think the problem occurred when Firefox upgraded and my settings got changed.

  • When playing games such as Cityville, Farmville etc. I never get the complete screen. The bottom and right side are cut off

    When I open these games, parts of the game screen do not show up.If I click for full screen in Farmville it all shows up but in Cityville I can't click for full screen because that part of the screen is missing. If I open these games in IE. the whole screen shows up.

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • Only left half of home page is in view. entire right side is cut off. how can i fix it?

    i rebooted pc many times and only left half of firefox browser page loads every time it boots up. Can't get it to reposition correctly to center of screen. suggestions?
    thank you

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for