HP Laserjet P11102w printer not inslalling on Windows 8

I tried to install HP Laserjet P1102w printer on HP Envy dv7 Windows 8 laptop.
First I used CD provide to install driver. After running sometime it gives an error " The configuration registry basedata is corrupt".
Secondly Itried to install suitable HP Laserjet P1102w driver from HP on line. The download is completed but when I ckick to install, it does not completed.
I tried both ways by 3-4 times and have the same problem.
Can any body assist in this matter?

Hi @VISH2 ,
I see that you are experiencing issues installing the printer on Windows 8. I would really like to be able to help you resolve this issue.
Are you getting any error messages when installing by the downloaded drivers?
It sounds like a operating system issue, if you are getting the same error using the downloaded drivers, I would suggest to
Repair Windows. Repair Windows 8 using Automatic Repair .
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

HP Laserjet P1006 is not working on Windows 7 (64-bit).

I lost my original CD-Driver and I tried to download the CD-Driver on HP website but it doesn't work when I click printing. It seems that my HP Laserjet P1006 is not working on Windows 7 (64-bit).
Can anyone give me a link that works for installing driver for HP Laserjet P1006 for Windows 7 (64-bit)?
Thanks for helping!

Hi @achieverone ,
I can help you with finding the drivers for the Laserjet P1006.
Just to clarify, you were able to install the printer software, but it just isn't printing correct?
Here are the two drivers available for Windows 7 64 bit.
HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver.
HP LaserJet P1005/P1006/P1500 Printer Series Full Feature Software and Driver.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
Open and close the lid five times quickly. It should print off a page with black lines on it.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet 1320 Duplex Printing Not working with Windows 7

Hi
I've just bought a new PC with Windows 7 Home Premium. I have an HP LaserJet 1320 printer (Prod no. Q5927A, SN CNGW53RLRY).
I cannot find driver that works the same way as the previous driver HP LaserJet PCL5. If I use this driver and can still get duplex printing but it will only print one copy at a time.
If I upgrade to HP Universal Printing PLC (or PLC v5) I can print multiple copies but not duplex printing. I have searched high and low through the HP site but to no avail.
Any help and advice will be much appreciated.
Thanks
GB

Hello,
I've seen this same issue with my printers (other HP printers) whereby the default setting to support the Duplexing hardware was set to 'off'.
A quick method to check this is look at what the setting is for Duplex hardware in the Device Settings tab, and if it's not set, correct it.
Printer Properties:
From the 'Start' orb -> [Devices & Printers] -> right click on your Printer icon -> select 'Printer Properties' -> click on 'Device Settings' tab.
You should see a dialog similar to the mine (attached): look for the 'Duplex unit (for 2-sided printing)' and see if it's set to "Not Installed":
--> in either case, click on 'Not installed' and from the dropdown box, select 'Installed'... Click 'OK' to accept the changes and close the dialog.
Printing Preferences:
again, right click on your Printer icon -> select 'Printing Preferences' -> click on 'Advanced' tab.
-->Check to see if there is a 'Duplex Hardware' or '2-sided printing' option in here: mine doesn't show one but thougth I'd mention it nonetheless.
Click on the 'Finishing' tab and select 'Print on both sides'...or simply test print a multi-page document and set those preferences on-the-fly.
Let me know if this helps...
HardCopyTed
Regards,
HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
How to Give Kudos | How to mark as Solved
Attachments:
PCL6-DeviceSettingsScreenCap.JPG ‏81 KB

Hp Laserjet 8150n will not install on windows xp

computer went to the shop and operating system was replaced and now my printer will not reinstall.
windows xp and a hp laserjet 8150n printer.
printer is on the network and recognized by 3 other computers.
cabled network
loaded printer software to 64 % and then comes up with an error saying restart the computer and try again
each time I try to install the printer.
the wizard finds the printer but can never complete the installation.

Hi jnjgoss,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP LaserJet P1006 Print very slow with Windows 8.1

I have an HP LaserJet 1006 that is installed on Toshiba Laptop running Windows 8.1 and was working fine even from time to time it stop working at all, then I have to remove the software and then reinstall it again and then it works fine, last time I downloaded the Windows 8.1 Driver for the printer.
But this time, first I tried to remove the software but it didn't work; the printer still show up on the control panel - Devices and Printers. then some how I was able to reinstall the software , after that the printer is working but printing very slow even it is a LaserJet printer.
Please any one can help with that?
Thanks;
Waleed;

Hey @wmowafi,
Welcome to the HP Support Forums!
I understand that you're experiencing a slow printing issue on Windows 8.1 when printing to your HP Laserjet P1006 Printer. I would like to work with you today at resolving this issue. Now the only driver available for your product on Windows 8.1 is a hostbased plug and play basic generic driver. Therefore, there is limitations for what can be done for troubleshooting. As you stated, you have already attempted an uninstalled and reinstalled of the driver to no avail. I'm going to suggest some further steps and tools to resolve this issue for you.
Step 1: Uninstall Your Printer:
Disconnect your USB cable
Click the following link: Fix problems that programs cannot be installed or uninstalled to access the Microsoft Uninstall Tool.
Once the website opens, select Run Now on the right hand side
Allow the Tool to run.
When prompted choose Uninstall
A list of programs should populate and you're looking for the Laserjet. It may appear as LJ P1000 series. Please select the Laserjet series and Uninstall it.
If the Laserjet doesn't show in the list of programs than your Windows 8.1 computer does not see the Laserjet driver as properly installed.
Step 2: Clear the Temp Files:
Launch your Start screen by right clicking on the Windows icon on the bottom left of your screen or by select the Windows button on your keyboard located to the right of the Ctrl button.
Once the Start screen launches, type the word Run
Click on Run to launch it
In the Run box type %temp% and select OK
Once the Temp folder opens, hold down Ctrl + A at the same time on your keyboard and everything will highlight in the folder. Select 'Delete' on your keyboard. Don't worry, no files or folders on your actual computer will be removed during this process. If a file is still be used on your computer you will get a pop up to 'skip' the file
Once the Temp folder is emptied of its files, close the window
On your Desktop, right click on the Recycling Bin and left click on 'Empty Recycling Bin'
Restart you computer
Step 3: Reinstall the Laserjet P1006:
Please keep your USB cable disconnected
Click on the following link: HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
The driver page for your product will now launch
Select Download and allow the download to Run
Once the download is complete an extraction will automatically run and once completed the installer will launch
Run through the step-by-step on screen instructions.
Please do not plug in your USB cable until prompted
Ensure that your USB cable is plugged in from the rear of the printer directly to the computer. Avoid extenders or docking stations as they can cause printing and communication issues.
Test printing!
Please let me know if the steps I've provided resolve your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

HP LASERJET 1015 printer DRIVER INSTALLATION TO WINDOWS 7 32 BIT OS

Dear member,
i have windows 7 32 bit OS hp computer,
i am unable to install HP LASERJET 1015 printer to the PC.
kindly suggested me to insatll the driver to HP LASERJET 1015 printer please.

Hi, the only driver available comes with Windows 7.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

HP Laserjet P1102 does not work with Windows 10

I have just upgraded from Windows 7 to Windows 10 and whilst my Canon MG6150 works with Windows 10, the other printer HP Laserjet P1102 does not. Looking at the HP website it seems that the Windows 10 drivers for this printer are not yet available. Is there any way I can use the printer without the dedicated drivers? I have been told I should try to roll back but the printer is not recognised in device manager. Please help!

Manual, Please let me know the outcome.

HP Laserjet 1020 printer not printing at all

I have this HP Laserjet 1020 printer that I loaned to a friend when her computer died and since I got it back no matter what I do it won't print on my desktop (HP Pavilion Media Center a1324n Desktop PC) it prints without problem with my laptop and I've done nothing to the laptop to make it work etc, however on my desktop I've uninstalled, re-installed and downloaded all the latest drivers etc trying to get it to work but without success.
When I hit the print button, the green ready light is on, then briefly the red trouble light goes on, the printer starts whirring, then the red light goes off, the green light stays on the whole time and the unit stops whirring. I check the print status box it shows the print job in the que as printing but nothing is happening so I sit and wait for a while (a couple of minutes) and then out of frustration I cancel and delete the print job, turn the printer off, the print job disappears from the print dialogue box and I turn the printer back on it whirs and the does nothing. I've repeated this process multiple times and then I pull my hair out. Now I'm bald. I used to look like Brad Pit (in my dreams) help me before I start looking like golum in lord of the rings.
Ernie

That is pretty straightforward. The printer does not respond to the print command. Help!!!!

HP B500 Wireless Bluethooth Adapter for HP Printer Not Working With Windows 8.1

I have been using the HP BT500 bluetooth Wireless adapter to print wirelessly to my HP Officejet Pro 8500 printer. I have been using Windows Vista, but recently upgraded to Windows 8.1. I learned after the upgrade that the HP B500 wireless bluetooth adapter is not compatable with Windows 8.1. I have attempted to find a driver upgrade for the B500, but there does not appear to be one available. I have also searched the HP site and other sites in an attempt to locate an alter wireless blotth adapter to replace the B500, but have again been unable to locate one.
Is there a wireless bluetooth apter that will allow me to print wirelessly to my HP Office Pro 8500 from my laptop?

Hi @Raider83,
Welcome to the HP Forums!
I noticed that your HP B500 wireless bluetooth adapter for your HP Officejet 8500 is not working with Windows 8.1. I am sorry to hear this but happy to look into this for you!
I am not sure if you are using a 32-bit or 64-bit Operating System. But sometimes with Windows 8.1 you can use compatibility mode to install an older version of the driver. Which might help the situation. Here is a link to some other Windows drivers, HP bt500 Bluetooth USB 2.0 Wireless Adapter Drivers.
Once you got a driver downloaded, follow this guide, Make older programs compatible with this version of Windows, on how to install it using compatibility mode. It is not guaranteed to work, but it is worth a try!
If you still need me to look for other bluetooth adapters, please respond with your printer's Product/Model Number. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As there are multiple HP Officejet 8500 printers.
Thank you for posting, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Laserjet 1300 "printer not responding"

I have a G5 tower, with Tiger and am printing to an HP Laserjet 1300. I often get the message: "printer not responding". If I turn the printer off and on, it works. any suggestions would be appreciated. I'm connected through usb.

Is your printer connected through a hub or directly to the computer?

Apple airport express wireless printing not working on Windows

I have installed the Airport Utility v 5.5.3 and Bonjour Printer Wizard on my Windows XP (SP3) machine. I have successfully set up the router, but am unable to print wirelessly. In the utility, I see my printer and have selected the checkbox Share printers over WAN. I have the driver printers installed on a Windows laptop, but am unsuccessful printing from the laptop.
I read somewhere that I need to set the Internet > Connection Sharing to Off (Bridge Mode). I did that and then got the following error and then can't connect to the internet via the router at all:
An error occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again. Error -6753.
I have tried setting up Bridge Mode several times and ensured my virus protection and firewall were disabled, but always the same results, so I reset my router and am back to using the Internet > Connection Sharing option of Share a public IP address.
The whole reason I bought this router is because it is supposed to be easy for wireless printing, but this has been far from easy to set up. So frustrating. Any suggestions?

Thank you for your quick response. Yes, I have Bonjour Print Services installed. I thought I had to select Share printers over WAN for some reason. Just now I deselected this setting, updated the utility and wireless printing still does not work .

Bursting control file for Printer not working in WINDOWS ENVIRONMENT

Hi,
We are trying to print xml publisher report output (PDF) using bursting control file. Is not wokring.
We are using ebs (R12.1.1) on Windows environment.
Any pre-requisite setup (ie. cups config) should be done before printing using control file. Please guide me i am not having knowledge in printer setup and printer part..
Thanks in advance
--Ben

Hi Hussein,
Yes, I am able to print seed concurrent report (o/p -text) to that printer (method:- giving the printer name and copies by clicking " Option " in SRS window.. )
When i do the same for xml publisher publisher report to the same printer , its not working using bursting control file.
I too made the test in xml publisher report without bursting control file , there i faced another new issue. Let me explain
1. We are using RDF as data source . here o/p :-" XML "
2. We are using RTF as layout. In template definition, i chose the default o/p type as :- "HTML"
3. When i submit the request, i choose the printer which is working fine for printing seeded report. (method:- giving the printer name and copies by clicking " Option " in SRS window.. )
4. My printer getting prints HTML tag, instead of desired o/p. I wondered after seeing the printout.
5. I cross checked by clicking view output, its showing me the exact html output as per RTF layout.
Dont know wat happening ??? Help me out.
i did the same for changing default output type in template definition to RTF,PDF.. its printing source code of the output type instead of printing output.
Thanks & Regards,
--Ben

I cannot download a new driver to my HP Color LaserJet 3600n printer (I'm using Windows 7) - help

any help appriciated

@vincepay
Here is a link to the drivers for the HP Colour LaserJet 3600 windows 7 drivers:
HP Color LaserJet 3600 Series Printers World Wide Printing System - 64 bit driver for windows 7
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

PDF Print - Numeric&bold Calibri font is printed not properly on Windows 7 (on XP - OK)

In MS CRM 4.0 system I generate reports using Reporting Services (10.0.4067.0 - 2008 SP2 + MS12-070). Then I export them to PDF.
Font which is used - Calibri. In PDF file everything is displayed properly. When I print that PDF in Adobe Reader (Windows 7), then bold&numbers are wrong (bigger, smaller captions - looks like diffrent font). When I print the same file on the same printer
using Windows XP, then everything is ok!
I've tried to switch Calibri font in Win7 (taken from XP) - still the same problem. I've installed Foxit Reader on that machine and print is good! Unortunately, it has to be Adobe.
Only one case that is wrong - Win 7, Adobe Reader (X and XI). What can be the reason?

Hi simon17,
As per my understanding, I think this issue is caused by the Adobe Reader. I think you can try the following methods to check the issue again:
Check for Adobe Updates.
Try the Repair Adobe Installation
Run Adobe as Administrator.
Since this issue is related to Adobe Reader, not related to Reporting Services. If this issue still exists, I suggest you post the question in Adobe Reader forum at:
http://forums.adobe.com/community/adobe_reader_forums
Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

My canon isensys 4430 printer not compatible with windows 8

Hi guys, please can i get some help. I have a new laptop running windows 8, and my isensys 4430 printer will print but not scan. What can I do

Try install MF Toolboxhttp://www.canon.cz/support/consumer_products/products/fax__multifunctionals/laser/laserbase_mf_series/i-sensys_mf4430.aspx?type=download&softwaredetailid=tcm:126-1047366

HP Laserjet P11102w printer not inslalling on Windows 8

Similar Messages

Maybe you are looking for