HP Laserjet P1505n: network configuration lost

Hi.
In my work I meet many HP Laserjet P1505n. These printers often lose their configuration and they become unreachable whit their ip. If I print a page-configuration (pressing the green button), no page is printed. I have to reset (pressing red+green button while turning on) and setup the printer. This happens a few times until the reset does not work anymore.
If I print with usb cable, I have no problem.
Can you help me?

To see the printer in the Default view of the Add printer window, a protocol called Bonjour is used by the printer and Mac. This protocol is having issues for some users who have upgraded to Yosemite. Until the issue is resolved you may be able to use one of the IP protocols to connect to the networked printer. To do so you will need to find the IP address being used by the printer. If the LJ-P1505n has a control panel, you may be able to generate a report showing the network settings.
Once you have the IP address you can open Printers & Scanners and click the plus button to add a printer. Then click on the IP icon and enter the IP address of the HP in the Address Field. In the Protocol field, change to HP Jetdirect-Socket and in the Queue field, leave this blank. You can then change the Name from the IP address to LJP1505n and in the Use menu, select the P1505n printer. Click the Add to complete the printer creation and then see if you can print.

Similar Messages

Laserjet P3005dn network configuration options missing from I/O menu

I acquired a Laserjet P3005dn that should be networkable, and has an Ethernet port in the back, but when turned on, there is no network configuration in the menu. From the menu, I choose Configure Device, I/O. The only option is "I/O Timeout". The "Embedded Jetdirect" option is not there.
I tried to do a cold reset, but it made no difference. Can this be fixed?

I see that this is a commercial LaserJet printer. It would be best to post in the commercial LaserJet forums.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP Laserjet p1505n doesn't work over network with Yosemite

Ever since upgrading the machines in my house (Mac Pro, iMac, MBPretina, MBAir) to Yosemite, I have not been able to use the network attached Laserjet p1505n that used to work flawlessly under 10.9. It doesn't appear in the printer tab in System Prefs where it used to pop up. Anyone have any experience with this? The printer will install via USB just fine on the Mac Pro, MBPRetina, etc. Thanks!

To see the printer in the Default view of the Add printer window, a protocol called Bonjour is used by the printer and Mac. This protocol is having issues for some users who have upgraded to Yosemite. Until the issue is resolved you may be able to use one of the IP protocols to connect to the networked printer. To do so you will need to find the IP address being used by the printer. If the LJ-P1505n has a control panel, you may be able to generate a report showing the network settings.
Once you have the IP address you can open Printers & Scanners and click the plus button to add a printer. Then click on the IP icon and enter the IP address of the HP in the Address Field. In the Protocol field, change to HP Jetdirect-Socket and in the Queue field, leave this blank. You can then change the Name from the IP address to LJP1505n and in the Use menu, select the P1505n printer. Click the Add to complete the printer creation and then see if you can print.

I lose connection with network whenever put MacBook Pro to sleep or reboot. Lost network configuration. Have to use diagnostics to relocate and reconnect. What is the fix?

I lose connection with network (router: Airport Extreme, latest firmware) whenever MacBook Pro put to sleep. Have to use diagnostics to reconnect. Tells me network configurations have changed, then reconnects me to network. What is the fix?

Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

HP LaserJet P1505n, connected by Ethernet cable, suddenly cannot get an IP address by DHCP.

My HP LaserJet P1505n, connected by Ethertnet to my LAN, has been working flawlessly for three years. The last time I turned it on, it could not get an IP address by DHCP. I verified this by printing a self test page. The IP adress is 0.0.0.0. I looked at the self test page from three years ago and saw that the IP address was 192.168.0.100.
No recent changes have been made to my network. I verified that the Ethernet cable and connection to my router were fine by switching Ethernet cables with a laptop. The laptop worked with both cables and connections while the printer failed to work with either configuration.
Any suggestions (besides trying to deal with HP support - a disaster) would be greatly appreciated.
This question was solved.
View Solution.

What operating system do your computers use? This would be helpful to know if any steps needed to be performed from a computer.
When the Ethernet cable is connected to the router and the printer, do the network lights on both devices indicate a connection? If there is no connection detected, the lights (green and amber in most cases) on the Ethernet port on both ends will not be on.
What brand/model of router is being used?
When you swapped the cables, did you also change the ports they were connected to on the router? If not, try connecting the printer to a different port on the router. Did anything change?
EDIT:
Try disconnecting the power from the printer for one minute and then reconnect the power and turn it on (if it has not turned on automatically). Was there a change? This is known as a hard reset and it reinitializes the hardware and software in the printer which also forces it to try and establish a network connection again.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Can't get my hp laserjet p1505n to print with verizon mifi

I changed internet provider from broadband to Verizon MIFI and now my printer doesn't work. II have a HP Laserjet P1505n and it was networked to my desk pc and my laptop. What can I do to get it working again??
Thank you
Connie Moore

Check this page from HP
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01863616&jumpid=regR1002USEN
Maybe you can find your drivers there —or at least some information.
As of your printer, turn it on and connect it to your mac, then click in software update —chances are that you can download the drivers.
Good luck

Network configuration after suspend/resume

After a suspend and when I resume, the network configuration of my wifi card is lost (since the module must be unloaded).
What do I need to setup so that the settings of the wifi card (ip address, default gw) are remembered on suspend and applyed later on resume?

But the default network config may not be the last one I used, or the prefered one anyway...
At least I'd like the network to be initialized the same as it was before suspending.

Print to a Laserjet 4050 networked on an XP machine from my iPad

How can I print to a Laserjet 4050 networked on an XP machine from my iPad? Can I use the AIO app? does not find the printer. Thanks.

@Mojo-Risin
If I understand your question, you would like to use the AiO remote app on your iPad with your Laserjet 4050, correct? If this is case, unfortunately, the AiO remote app is not supported with the Laserjet 4050 and the iPad.
Thank you.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

How to handle changing IPv6 network configurations

Hi,
I run a Mac Mini as a server with OS X Server 10.8.5/2.2 on it using an internet connection with DS-lite. The server runs fine on a private IPv4 and a public IPv6 assigned by the ISP thrugh my router. Now from time to time (on some really odd days 5 times a day) my ISP decides to change my IPv6 prefix and as a consequence the IPv6 of my server. This results in a warning and some services seem to work not always properly. When I handle the warning and update the network configuration (although all relevant pieces of configuration that are shown along this proces remain unchanged), everything is back to normal.
Now I wonder whether there is better way to handle changing IPv6 prefixes while everything else is unchanged? Any thougths? Thanks. Steffen

I'll add my 2 cents too Sudheer...
I suppose your versioning strategy should take into account your particular circumstances, impact analysis, ESB architecture etc...
In our case it makes sense to version the service operations because we have some consumers that want to stay on the older version & other that want to move with the changing versions...
We've noticed that SAP, with the standard delivered enterprise services also version step the service operations so you esentially have 2 service contracts but one that caters for additional fields/functionality. The consumer uses the service operation that they prefer.
The other possibility, if you are in a position to make the new fields 'optional' then you could do that without impacting all the consumers, the consumers that have the additional info to pass in the request can do so & the other consumers can carry on business as usual.
Then you could also version step the entire service, that would entail making use of a new software component version but this would entail new endpoints & depending on your architecture it could impact all your consumers. If you're using an integrated ESB architecture, your consumers would have one endpoint & the ESB would route the request to the relevant service version.
So you could minise impact on the consumers & develop a good versioning strategy depending on what your current situation is.
Regards, Trevor

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and Network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.

Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

How can i print a network configuration page , i need the IP on a ph1510

how can i print a network configuration page , i need the IP on a ph1510

Hi,
What is the exact printer model?
If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

LaserJet 2550n network printer on XP host PC, can't install Windows 7 client laptop

Have Color LaserJet 2550n network printer connected to XP host PC. I can't install Windows 7 client laptop for printer. The wireless network is fine, I can access documents back and forth, merely the printer doesn't work and there's no way to download 64bit drivers for this printer from HP.

Resolved, not solved.
I talked to HP product support. The Officejet Pro 8500 A910 will not install on Windows XP (at least the Home Edition) when networked through a router. It will install through USB. I uninstalled the program and reinstalled it with only USB connected to clean out all the network printer/scanner information. Product support claimed it would install through an ether net cable connected between the printer and computer but this does little good if you need internet access.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP LaserJet p1505n Error: Load Paper msg

I have had no problems with my year and a half old (minimally used) hp 1505n printer until recently. Now, when I click the print icon (on WordPerfect) after the Preparing Document messages flashes on and disappears a large message in a window appears on the right of my screen with a diagram of a printer depicted on it. On top of the window it says: HP LaserJet P1505n Error. In the window near the printer depiction is the message: Load Paper. However, the tray is filled with paper. The printer works if I click the OK in the message and press the print button on the printer.
One technician told me she thinks it because the printer is on Manual Feed rather than Auto Select. But when it is put on Auto Select it always returns to Manual Feed even after clicking OK.
Any solutions?
Stan

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Problem with Lion 10.7.3 with hp laserjet 3600n network printer

Hi
Problem with Lion 10.7.3 with hp laserjet 3600n network printer
Guys i am having a mad day with this new OS and some network printer none of them work with new LION,The software for this printer is currently unavaliable. Please contact the printers manufacturer for the latest software, i need the drivers for this, please give a hand with this issue
Best Regards

Exactly the same infuriating problem we and many others get with OS X from 10.6 on when Apple dropped Apple Talk.
Having spent days fighting to get drivers that will run our older laser printers like HP5000, 5100, 2100, 2200 and 4MV, we came up with a simple solution:
We use an iMac running 10.5.8 as a print server. All the 10.6 upwards Macs on the same network will see and add the printers immediately through the shared older (Apple Talk) iMac.
Cheapest and simplest option really .... it'sannoying that a brand new Mac can no longer see existing network printers without complex investigation and trying various downloads.
Answer is simple and cheap if you happen to own a 4 or 5 year old Mac with an OS lower than 10.6 which still has Apple Talk.

HP Laserjet P1505n: network configuration lost

Similar Messages

Maybe you are looking for