HP Laserjet P1606dn and Windows Server 2012

We have 3 HP Laserjet P1606dn printers that we need to install on a Windows Server 2012. Unfortunately, there is no drive available for Windows Server 2012. Will HP be releasing an updated driver for this printer? If not, are there any workarounds? Thanks for any assistance.

Hi ks267,
I don't know if or when there would be an updated driver to work with Windows Server 2012, but I can offer you a link to subscribe to notifications for driver updates. Subscribe to HP alerts and updates.
The only workaround I can think of is to install the software on each computer rather than installing it on the server. Although if you have 20+ computers that would not be ideal I am sure Please bear in mind, my technical expertise is with consumer products and software, I have no training on servers.
Maybe your request for a workaround will be answered by another community member who knows more about them.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllece

hello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer

Oracle client 32/64 bit on Crystal Server 2013 and Windows Server 2012

I'm getting the error "Unknown Database Connector Error" when I run report on the server and it works OK on crystal designer 2013.
Been reading this thread 32&64 bit Oracle Client but not much help there.
Here are the details
System
Windows Server 2012
Crystal Server 2013 SP5
Crystal Server has been installed and appears to work fine. I was able to develop a brand new report locally and saved it to the server and it displays ok. Of course when I click on refresh on the report, it will error out due to database connection it looks like.
We have installed both oracle client drivers 64 and 32. 64 was installed first and then 32.The path has been modified so that the 32 shows up first.
I even ensure oracle_home and oracle_home32 are specified and restarted the server. I still get the same error.
The tns entries are also located in both installs of oracle client...
What might be the issue?

Oracle Database Client 12.1.0.2.0 (32-bit and 64-bit installed)
Installation Type: Custom
COMPONENTS INSTALLED:
SQLPLUS
ORACLE NET
We are currently not using an ODBC connection.
We installed Crystal 2013 Server SP05. This is the sole package installed (believe it's the latest version) without any extra patch package installed (believe no patch needed as it's the latest version).

Windows 7 Enterprise 32 bit and Windows Server 2012 64 bit successful dual boot.

Client Windows 7 Enterprise 32 bit SP1, Windows Server 2012 64 bit successfully install for dual boot. Even deleted Windows 7 Enterprise from msconfig, moved Windows Server 2012 partition, for dual boot installed Windows 8.1 64 bit (now posting from),
deleted Windows Server 2012 from msconfig, moved Windows 8.1 partition, just for knowledge.

Hi,
After referring to your post, I can understand you are trying to install 32 bit and 64 bit OS on same system. Are you trying to perform that? Here providing you thread link for detail.
dual boot windows 32 bit and 64 bit at same pc
Hope it helps to understand!
Regards.

Help! Office 365 and Windows Server 2012 R2 (Essentials) no longer communicating

Hi - I have had this problem beginning November. From what I can tell, it started after I applied a Windows Update patch of the latest Microsoft Online Services Sign-in Assistant. Now when I go in to the Windows Essential Dashboard, where I have
my domain linked with Office 365 for business, the "Microsoft Online Account" area shows as "unknown". I have tried removing and re-adding the assistant but to no avail. I have read some clue that the version should be 7.250.4259.0
but I am unable to find the download locally or online.
Additionally, the area of Office 365 does not show my Org, Domain, Subscription or exchange online information. However, when I click "Link a Domain" it is recognizing that I have already done so. Again, everything worked great until
this blasted update.
We are a school and I need to be very careful not to break/disconnect the Drive Shares of the "Cloud" component as that's how students access their files.
I did see this link from NEO YU but am a bit nervous as my knowledge of AZURE is near null.
http://technet.microsoft.com/en-us/library/jj151815.aspx#bkmk_installmodule
Please help get me reconnected and thanks to all for ALL you do!

you may need follow that documation...start a PowerShell as administrator and type the cmdlet
Import-Module MsOnline. After successfully importing the module, continue with
Connect-MsolService. You will be asked for credentials. Type a global administrator of Office 365.
this...
https://mshiyas.wordpress.com/howto-adfs-adfs-proxy-on-windows-server-2012-r2-with-office-365/
Best,
Howtodo

AD RMS cluster with windows server 2008 R2 and Windows Server 2012 R2

please i'm trying to add ADRMS server with windows server 2012 R2 with our ADRMS 2008 R2 cluster. and it fails with the following error:
"The Client DLL version doesn't match with the one of the servers"
so i want to know is it supported to add RMS 2012 R2 server to RMS 2008 R2 Cluster
Thanks

They can't coexist, but usually what happens is you add the 2012 server, it migrates your cluster database and then your 2008r2 servers can no longer connect.
What is this value:
DRMS_Config database
dbo.DRMS_ClusterPolicies
AdrmsFileVersion

CSM 4.2 and window server 2012

Iam installing cisco csm 4.2 on windwo server 2012 standard. I get error (attach file).
So CSM only run on window server 2008 enterprise R2 or window server 2008 enterprise R2 SP2?
Could I run CSM on window server 2008 standard or window server 2012 Standard ?
Thanks
Duyen.

Hi Alfred,
Unfortunately, CSM 4.2 does not support IPv6 routes on the ASA. You can find the list of new features in 4.2 here:
http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.2/release/notes/csmrn42.html#wp82410
You can also use this document to track new features that are added to CSM:
http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/all_releases/csm_new_features.html#wp79523
Hope that helps.
-Mike

Adding Administrative Templates (.admx) for Windows 8 and Windows Server 2012 to my Windows 2008 domain

Hi,
We have a Windows 2008 domain, and now we need to configure IE 10 options, so we have to import the Windows 8 / 2012 ADMX files. Can we just do the following:
1. Download
http://www.microsoft.com/en-us/download/details.aspx?id=36991
2. Unzip it and copy the .admx files to c:\Windows\Sysvol\<domain>\policies and create a directory called policydefinitions
3. Then just re-open Group Policy Management ?
Correct way or not? Will this have any implication on network or any old GPO.
Thanks for reply
/Regards Andreas

> But i cant seem to find "Check for publisher`s certificate revocation",
> so how can i disable this. I did see a url to create a ADML file, but
> this was very old.
Doesn't exist - only "Server certificate". The old URL might still be valid.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

SQL Server 2012 and Windows Server 2012 - are they used together?

is win server 2012 standard container sql by default

No! They are two different products.
more info: http://technet.microsoft.com/en-us/library/hh831769.aspx
sqldevelop.wordpress.com

What's the difference between windows server 2008 and windows server 2012 ?

I would be thankful if anyone would give a comparative point of view of both products.

Hope following link will help you to find the right answer. this link will download a pdf file to your computer.
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&ved=0CFMQFjAC&url=http%3A%2F%2Fdownload.microsoft.com%2Fdownload%2F2%2FC%2FA%2F2CA38362-37ED-4112-86A8-FDF14D5D4C9B%2FWS%25202012%2520Feature%2520Comparison_Hyper-V.pdf&ei=Fv_RUMHfMsK4rAfsqYDYCA&usg=AFQjCNGhSRusi2Gp7K386Gpu24mzLfbF9Q&sig2=nCWPUQ6Y7aGsNBqKCCed5Q&bvm=bv.1355534169,d.bmk
Regards,
Praveen Kumar (IT consultant)
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Windows server 2012 as primary DC and DNS server and windows server 2003 as secondary DC and DNS

Migration from windows server 2003 AD DC and DNS server to windows server 2012 R2,
Cannot I set up Windows server 2012 R2 as primary DC and DNS , windows server 2003 as secondary DC and DNS ? (for backup server when server 2012 fail, user can continue to login and access internet services)

You can mix both as long as your Forest and Domain Functional level are Windows Server 2003. However, I would like to bring your attention to this blog about known problems when mixing DCs with Windows Server 2003 and 2012 R2 OS:
http://blogs.technet.com/b/askds/archive/2014/07/23/it-turns-out-that-weird-things-can-happen-when-you-mix-windows-server-2003-and-windows-server-2012-r2-domain-controllers.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10?

Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10? We have a remote desktop farm setup with 2012 R2 servers and we are publishing some web links that only work with IE10. As a result, we need to
downgrade the remote desktop servers to IE10. I have a feeling that this isn't possible, but if I could get a definitive answer, I would greatly appreciate it, thank you!

Hi,
Agreed with DonPick.
Internet Explorer 11 is preinstalled with Windows 8.1 and Windows Server 2012 R2.
More information regarding Internet Explorer 11, please check:
Internet Explorer 11 - FAQ for IT Pros
http://msdn.microsoft.com/en-us/library/dn268945.aspx
Best regards
Michael Shao
TechNet Community Support

Migrate SBS 2003 with AD and Exchange to Windows Server 2012 Standard

We are using SBS 2003 and we have configured Exchange server and AD with DNS and DHCP. Now we are planning to move SBS 2003 to Separate servers like windows server 2012 standard AD with DNS and DHCP and Windows server 2012 Standard with Exchange
2010.
Is it Possible?? we need step by step guide.
Thanks in advance.

Hi,
You probably would not find any step by step guide for this kind of migrations. If you are not comfortable with doing such migrations I would recommend to if you need to do it your self do some test migrations. Or otherwise get help by a local IT company
that is familiar with migrations.
But to give you some information, first thing before starting a migration is check the health of your SBS 2003 server / domain. Use tools like dcdiag, netdiag and best practice analyzer. I wrote a blog post about steps to think about before you start this
might help: http://blog.ronnypot.nl/?p=914
When every thing is clean you can start adding the new windows server 2012 machines as member servers to your domain.
Next you can promote one of the servers to additional domain controller on your domain (Keep in mind SBS needs to hold all FSMO roles so moving these is the last step your should do.) Also promoting a windows server 2012 to domain controller has slightly
changed, you need to install the ADDS role and follow the wizard to promote the server to a DC.
With installation of the new DC install DNS allongsite it will automatic replicate settings during confiugration.
DHCP must be installed manual, depending on your scope and settings it might be as easy to create a new scope and disable the old dhcp server.
On the server Exchange needs to be installed, make sure you install and do all pre-requirements. Than install Exchange it will automaticly detect you already have an Exchange organization and is installed as additional server. You can configure all settings
and when everything is configured right you start moving mailboxes.
When everything is moved away from the SBS 2003 server, uninstall exchange, move the FSMO roles to the new DC and after that demote the sbs 2003 server so it is not listed anymore as an additional DC in the domain. Last would be shutdown the server and remove
all records left in AD and DNS.
There is this guide for migrating SBS 2003 to windows server 2008 R2 and Exchange 2010, this might give you some usefull information, not everything will be the same but it is a good start:
http://demazter.wordpress.com/2010/04/29/migrate-small-business-server-2003-to-exchange-2010-and-windows-2008-r2/
Regards Ronny
Visit my Blog or follow me on
Twitter

HP Laserjet P1606dn and Windows Server 2012

Similar Messages

Maybe you are looking for