HP LaserJet P2015DN on Windows XP 32bit SP3. Ip address auto-configuring?

Good morning.
Sometime my LaserJet P2015DN does not work. If I go to see Network configuration, in "IP address" the value is "Configuring", but te printer is set to manual ip. Actually mi configuration of ip address is:
Host Name: NPI140860
Domain Name: My_Domain
Bonjour printer name: HP LaserJet P2051 Series (140860)
IP address: Configuring <-------- ??????????????
Subnet Mask: 255.255.255.0
Default gateway: 192.0.0.4
IP configured by: Manual
WINS server: 192.0.0.4

Hi nanopepe;
Welcome to the community;
I hope you are doing well and having a great day;
Your HP LaserJet P2015DN is a commercial product. I will suggest posting in the forum for HP Business as well Support for yet a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

Multimedia Audio Controller, and Video Controller(VGA compatible) are missing on Windows XP(32Bit) SP3

Hi.
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card with 256MB of RAM)
Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or Reader a web-based applet that identifies my GPU or Audio controller
and finds the latest graphics driver for my GPU, and Audio.
I have two Windows XP installations:
Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
Host Controller in device manager.
First: Yes, my motherboard has integrated video, and integrated audio card
According to the screen shots above, then
The vendor ID of Multimedia Audio Controller is 8086 and the device ID is
24D5.
The vendor ID of Video Controller is 8086 and the device ID is
2572.
I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
Thus, could you please help me to find them?
I have tried installing a soundMAX card driver, however, I found this error.
I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
The motherboard model is:
Belarc Advisor Computer Profile
Operating
System
System
Model
Windows XP Professional
Service Pack 3 (build 2600)
Install Language: English (United
States)
System Locale: Arabic (Yemen)
Installed: 22/03/2013 12:03:16
ص
Boot Mode: BIOS (Secure
Boot not supported)
Enclosure Type:
Desktop
Processor
a
Main Circuit Board
b
3.00 gigahertz Intel Pentium
4
16 kilobyte primary memory cache
1024 kilobyte secondary memory
cache
64-bit ready
Hyper-threaded (2 total)
Board: 775i65G.
Bus
Clock: 200 megahertz
BIOS: American Megatrends Inc. P3.00
03/20/2007
Drives
Memory Modules
c,d
39.99 Gigabytes
Usable Hard Drive Capacity
29.48 Gigabytes Hard Drive Free
Space
COMPAQ CD-ROM LTN486S [Optical drive]
3.5" format removeable
media [Floppy drive]
WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
0, rev 05.03E05, SMART Status:
Healthy
504 Megabytes Usable
Installed Memory
Slot 'DIMM0' has 512 MB
Slot 'DIMM1' is
Empty
Local Drive
Volumes
c: (NTFS on drive 0) *
20.98 GB
14.16 GB free
d: (NTFS on drive 0)
19.01 GB
15.33 GB free
<center>
* Operating System is installed on
c:
</center>
Network
Drives
None
discovered
Users
(mouse over user name for details)
Printers
local user
accounts
last logon
عايض
لرضي
19/01/2015 10:59:17 م
(admin)
local system
accounts
Administrator
never
(admin)
Guest
never
HelpAssistant
never
SUPPORT_388945a0
never
<center>Marks
a disabled account; Marks
a locked account </center>
Controllers
Display
Standard floppy disk
controller
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE
Channel [Controller]
Secondary IDE Channel [Controller]
None
discovered
Bus
Adapters
Multimedia
Intel(R) 82801EB USB
Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host
Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller -
24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R)
82801EB USB2 Enhanced Host Controller - 24DD
None
discovered
Virus
Protection [Back to Top]
Group
Policies
Norton AntiVirus Version 18.1.0.37
 Virus Definitions Version Not Up To Date
 Realtime File Scanning
On
None
discovered
Communications
Other
Devices
↓ Realtek RTL8139 Family PCI Fast
Ethernet NIC
Status:
Cable unplugged
Dhcp Server:
none responded
Physical Address:
00:19:66:1F:F7:54
USB Human Interface
Device
Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
HID-compliant mouse
USB Root Hub (5x)
USB Storage Use in past 30 Days(mouse
over last used for details)
Hosted Virtual Machines (mouse over
name for details)
Last
Used
SanDisk Cruzer Blade, s/n
4C532000020502112303, rev 2.01
19/01/2015
09:32:57 م*
USB 2.0 USB Flash Drive, s/n
59309e92e21612, rev 0.00
09/01/2015
12:29:17 ص*
<center>* Possibly used again before the reboot following this
time.</center>
None
discovered
See your entire
network map...
click for Belarc's System Management products
A man should convert his anger and sadness into strength to continue living in this life.

Dont worry, dont think anyone was as a matter of fact
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse

HP LaserJet 3050 With Windows 7 32bit for Acrobat XI Std

Multiple-Page scanning through Acrobat XI Std in Windows 7 32bit with HP LaserJet 3050 are not available!
Each time click on create -> PDF from scanner it just appear the "last page" in acrobat.
Is this acrobat XI bug?

Please update the drivers for your scanner. We saw this issue before and was resolved by installing the latest driver - Re: Acrobat 10 not Scanning all Pages from ADF (Automatic Document Feeder)
Thanks
Varinder

I can't install ANY AIR-based App in Windows XP Pro SP3

Here is the problem: I have AIR 1.5.1.8210, but any AIR apps can't be installed and when I try it the OS crashes and I have my computer restarted. It's very weird 'cause it's heppen only with AIR apps.
Yes, this is my last resource to find an answer to it.
Yes, I've done my homework and yes, I've done some research (and still doing it)
Yes, I'm using my administrator account logged on with password (so, I think, apps has no problem to install)
Yes, I tried install it with another user account I thought the app will ask the admin password (just like in Linux OS, when the app on installation ask you about the root password). Even though, no success. Of course, it's something expected 'cause the user hasn't admin permissions. But I give a shot.
Yes, I've already installed/installed about 5 times AIR runtime and the AIR apps (even manually) and no success...at all!
Yes, I used at least 4 apps to system/registry/file cleaning (CCleaner, Glary Utilities, Advanced System Care and MVRegClean)...too many of them, but only to be sure of the complete cleaning.
Here in the forum another person, but on Vista, found almost the same problem as I, here's the link: http://forums.adobe.com/thread/199842?tstart=30
And another buddy ask about admin rights to install AIR apps, here's the link: http://forums.adobe.com/thread/415756?tstart=30
And, I found two others infos in Adobe site per se about any troubleshooting on AIR: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403150&sliceId=1 and log actions during installation: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb403123&sliceId=1.
2+2 = 4. So, I done/undone all the steps in the last two links (I installed/unistalled the AIR runtime and AIR apps 5 times, remember?) Usually, I can handle my own problems in computer, but this one I can't figure it out.
After all of this here's my system specifications: AMD Athlon 64 X2 Dual Core 3600+ (2.01Ghz), Windows XP Pro SP3 (32bits), Nvidia GeForce 7100 (512 Mb), 1.5 Gb RAM. Web browser: Mozilla Firefox 3.0.8 with TwitterFox.
So, could anyone help? I know, I know to mucj information, burt it was to facilitate the conversation, believe me.
Kisses, Cat777.

Well, well, well, right before somenone could answer me. I found the answer just here in the forum. I really love it!!!
Seems to be a incompatibility with the file created on Folder Lock installation: "windrvnt.sys." In this case, it is just uninstall Folder Lock and tah dah! Everything works perfectly.
Here comes my request: Hey, developers you all could give a try in resolve this issue, huh? At least give a try...It'll be very nice have the two programs properly installed in anybody's (who wants it) system.
Thanks, anyway for this space to research, change some infos even undirectly. If it was not this forum and all the debate in here maybe I'll be in the dark search for the resolution of it.
Thanks.

Adjust density on HP Laserjet P2015dn printer

Hello,
I use HP Laserjet P2015dn printer with Windows 7 Ultimate. I would like to ask you how to adjust the density of printing. I couldn't find any similar option in the printer's properties.
Thanks.

Stasko,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How to install Printer HP LaserJet P2015 in Windows 7!

Dear all!
I am luck using windows 7-32bit. I would like to install Printer HP LaserJet P2015 in Windows 7, but I can't install it because when installing, I get it failed. In fact, I can install it in Windows XP without any obstacles, but now I upgrade to Windows 7 32-bit. Would you mind telling me what to do to solve it?
Thanks a lot and I am looking forward to hearing from all.
My best regards,
LUCK
This question was solved.
View Solution.

Hi LUCK,
The printing functionality for your driver is prodided by the HP Universal Print Driver.
You may download the driver by clicking the Download button from the link below:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
If you may find it hard to understand any of the installation steps, you may find the full details below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
Please let me know of any needed clarification.
Sincerly,
Shlomi
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Manual duplex for LaserJet 1300 in Windows 8.1

Hello.
I'm using HP LaserJet 1300 under windows 8.1. I can't print pdf file on both sides of the page. When I choose this option it just prints the whole document. This printer is also used for windows XP and windows 7 and manual both side printing works fine there. I've installed drivers form hp site for windows 8.1
Help me please.

I have the same problem. Is there a solution? Even when it says it is printing double-sided it does not, and it's incredibly wasteful of paper! I see a lot of people asking the same question on different discussions and have only seen one answer that required modifying text in an .xml file. However, I could not find the file that the person referenced. This is the answer I saw (found at https://social.technet.microsoft.com/Forums/windows/en-US/171987b1-0d50-4dbb-93c7-67067eb0fbf7/hp-la... I believe they were using a different driver. Is there a similar answer for the PCL5 driver for Win8.1 64 bit?
Open the file called "hpcu1306.xml". You will probably find it under "C:\Windows\System32\spool\drivers\x64\3" ("C:\Windows\System32\spool\drivers\XXX\3" for non-x64 systems).
6. Search for this passage:



7. Search in this section for:
<prn_grp models="HP LASERJET P3005 ;HP LASERJET P3004 ;HP LASERJET P2015 SERIES ;HP LASERJET P2015D ;
HP LASERJET P2015N ;HP LASERJET P2015DN ;HP LASERJET P2015X ;HP LASERJET P2014 SERIES ;
8. Replace it with this:
<prn_grp models="HP LASERJET 1300; HP LASERJET 1300N; HP LASERJET P3005 ;HP LASERJET P3004 ;HP LASERJET P2015 SERIES ;HP LASERJET P2015D ;
HP LASERJET P2015N ;HP LASERJET P2015DN ;HP LASERJET P2015X ;HP LASERJET P2014 SERIES ;
9. Save the file and reboot your computer.
Done you now have manual duplex function for HP LaserJet 1300

Missing auto duplex option in Win 7 for LaserJet P2015dn

I moved my Laserjet P2015dn from a Windows XP to a Windows 7 machine. Now I cannot find the option to use the automated duplexing. The only thing I can find is an option to mannually duplex.
This question was solved.
View Solution.

1. Click on the Start button.
2. Click on Devices/Printers.
3. Once the windows screen has popped up....scroll down to your Printers/Faxes section.
4. Right click on the P2015 printer icon.
5. In the drop down menu, select "Printer Properties"
6. Once the Printer Properties dialog box has opened, click on the device settings tab.
7. Scroll down to the Duplex Unit line and make sure this is set to installed. If not, use the pull down tab and change to install. (see below pic.).
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

A55M-P33 and windows xp 32bit incompatibility issue ?

Ok I got a weird one that seems to be more of a compatibility issue than bad parts...
Motherboard: A55M-P33 MS-7786 V1.0
CPU: AMD A4 3400
RAM: Kingston 4GB 10600 KVR1333D3N9/4G
HDD: Western Digital 500GB Caviar Blue WD5000AAKX
PSU: CoolerMaster Elite Power 400w RS-400-PSAR
OS: Windows XP Home SP3 32bit
On a clean install of windows I am getting various bsods. Typically after I install a few round of drivers. Usually am able to get the dotnetframework + catalyst control center (chipset) drivers installed without incident. Seemingly about the time I either install the NIC or the SOUND drivers do I start seeing problems. Sometimes its 0x8e sometimes its 0x50 sometimes i dont get a bluescreen but on startup i get the infamous missing or corrupt /windows/system32/config/system ... I can always boot from a XP disc and run chkdsk /p to get it to startup, but soon thereafter the problem reoccurs (sometimes immediately with the next reboot). I've tried to use 2 other hard drives, one a brand new WD 1TB, another is a used tester drive we have laying around here.. both have similar results. I've tried to update the bios to the latest revision (1.4) but that didnt make a difference.
Here's the real kicker, I have another PC with almost IDENTICAL hardware (only difference is hard drive) (also of which I havnt spent nearly as much time with as this one) that gets a 0x0A bsod. All the hardware in both PCs are brand new (unless where otherwise noted).
Is there some sort of compatibility issue with this hardware and windows xp? I've let memtest86 run on both PCs for about 24 hours with 0 errors. Diagnostic on all hard drives mentioned turns up no issues.. I've tried different (new) sata cables as well. Any insight or any ideas or suggestions would be greatly appreciated.

here is the latest minidump. clean install of xp. installed dotnetframework then chipset drivers - both from CD included with mobo. restarted the pc about 5 times to get this to occur, happened on shut down.
Code: [Select]
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: e1ff3f30, memory referenced.
Arg2: 00000001, value 0 = read operation, 1 = write operation.
Arg3: f4ab7504, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000002, (reserved)
Debugging Details:
Could not read faulting driver name
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
WRITE_ADDRESS: GetUlongFromAddress: unable to read from 80561f50
e1ff3f30
FAULTING_IP:
ati2mtag+1f504
f4ab7504 f3ab rep stos dword ptr es:[edi]
MM_INTERNAL_CODE: 2
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: csrss.exe
LAST_CONTROL_TRANSFER: from f4b163e9 to f4ab7504
STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
f76b63b4 f4b163e9 e1ff3f30 00000000 00000010 ati2mtag+0x1f504
f76b63c8 f4b55bc2 e1ff3f30 00000010 f76b649c ati2mtag+0x7e3e9
f76b6420 f4b55d91 106b649c 00000001 e13ea0a0 ati2mtag+0xbdbc2
f76b643c f4b0b5ca f76b649c 00000000 00000000 ati2mtag+0xbdd91
f76b6468 f4b1126d 00000001 f76b650c f76b64ec ati2mtag+0x735ca
f76b6478 f4afeea5 f76b64e0 00000002 e1416dc0 ati2mtag+0x7926d
f76b64ec f4affaca f76b650c 00000050 10000000 ati2mtag+0x66ea5
f76b6528 f4affbd1 00000050 00000000 e1416e00 ati2mtag+0x67aca
f76b6558 f4b2207a e1632828 e179de20 f4ae601b ati2mtag+0x67bd1
f76b65b0 f4ae61cf 0079de20 e179de01 f76b6610 ati2mtag+0x8a07a
f76b65d0 f4ae642a e179de20 e179de01 f76b6610 ati2mtag+0x4e1cf
f76b65f4 f4ae4ed2 e179de01 00000004 f76b6610 ati2mtag+0x4e42a
f76b6648 f4ac010a e179de20 00000004 00000000 ati2mtag+0x4ced2
f76b6674 f4ab5ecf 8a246530 e15ad9c0 f76b6698 ati2mtag+0x2810a
f76b6684 f4ab137e f76b6700 00000001 8a184350 ati2mtag+0x1decf
f76b6698 f5175f83 8a246530 f76b6700 8a1840f0 ati2mtag+0x1937e
f76b673c f51753e5 8a184350 8a184350 f76b6760 ati2mtag+0x6ddf83
f76b674c f5152421 8a184350 8a2c16e8 00000001 ati2mtag+0x6dd3e5
f76b6760 f4a9292e 8a184350 8a2c1764 8a2c16d0 ati2mtag+0x6ba421
f76b6820 f4c48ca1 8a184038 8a2c16d0 8a2c16e0 VIDEOPRT!pVideoPortDispatch+0xcc4
f76b683c 804ef18f 8a184038 8a2c16d0 8a2c16d0 ati2mtag+0x1b0ca1
f76b684c 805831fa 8a184020 89ef70ac f76b69e4 nt!IopfCallDriver+0x31
f76b692c 805bf444 8a184038 00000000 89ef7008 nt!IopParseDevice+0xa12
f76b69a4 805bb9d0 00000000 f76b69e4 00000240 nt!ObpLookupObjectName+0x53c
f76b69f8 80576033 00000000 00000000 70b9c800 nt!ObOpenObjectByName+0xea
f76b6a74 805769aa f76b6bf0 00000000 f76b6bc8 nt!IopCreateFile+0x407
f76b6ad0 8057a1a9 f76b6bf0 00000000 f76b6bc8 nt!IoCreateFile+0x8e
f76b6b10 8054161c f76b6bf0 00000000 f76b6bc8 nt!NtOpenFile+0x27
f76b6b10 8050064d f76b6bf0 00000000 f76b6bc8 nt!KiFastCallEntry+0xfc
f76b6ba0 805761e2 f76b6bf0 00000000 f76b6bc8 nt!ZwOpenFile+0x11
f76b6be8 bf872f9e f76b6c44 00000000 f76b6c68 nt!IoGetDeviceObjectPointer+0x40
f76b6cd8 bf8a704a 00000001 00000001 00000001 win32k!DrvUpdateGraphicsDeviceList+0x3d2
f76b6d18 bf8a6f44 00000001 00000008 f76b6d48 win32k!DrvInitConsole+0xaa
f76b6d28 bf8a6ed5 00000001 f76b6d64 0015fd98 win32k!InitVideo+0x18
f76b6d48 bf8a8249 f76b6d64 8054161c 00050000 win32k!UserInitialize+0x14d
f76b6d50 8054161c 00050000 00000054 00000058 win32k!NtUserInitialize+0x87
f76b6d50 7c90e4f4 00050000 00000054 00000058 nt!KiFastCallEntry+0xfc
0015fdb0 00000000 00000000 00000000 00000000 0x7c90e4f4
STACK_COMMAND: kb
FOLLOWUP_IP:
ati2mtag+1f504
f4ab7504 f3ab rep stos dword ptr es:[edi]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: ati2mtag+1f504
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: ati2mtag
IMAGE_NAME: ati2mtag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4e31d503
FAILURE_BUCKET_ID: 0x50_ati2mtag+1f504
BUCKET_ID: 0x50_ati2mtag+1f504
Followup: MachineOwner
looking @ device manager: Video Drivers are version 8.881.0.0 the ati2mtag.sys file mentioned says file version 6.14.10.7213

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Httpsession problem on windows 2000 nt sp3(session track)

I set up the weblogic 6.1 sp3 on the windows nt 2000 sp3.
I put the two jsp(t1.jsp, t2.jsp) at the default web.
t1.jsp:
<%
HttpSession ses = request.getSession(true);
out.println("id1:"+ses.getId());
%>
test
t2.jsp:
<%
HttpSession ses = request.getSession(true);
out.println("id2:"+ses.getId());
%>
When I link the t1.jsp from the localhost, the session id1 and id2 are the
same.
But I link the t1.jsp from the remote and use IE6 sp1, the session id are
not the same.
However I use Opera browser from the remote to link t1.jsp, the session id1
and id2 are the same.
Is this the bug for windows nt 2000 sp3 or IE6 sp1?

I have the exact same symptoms on a Win2000 Pro development machine. fails at ifsmount,same as you...

ITunes 10.5 on Windows 7 (32bit) doesn't display the iTunes store

Hello there,
on my Windows 7 (32bit) system, already with iTunes 10.4 I encountered the problem that the iTunes store remained inaccessible - it simply wouldn't load/display. Problem was solved by removing all Apple software, cleaning up the registry, rebooting, reinstalling iTunes 10.4.1, and NOT installing Safari 5.x - because as soon as Safari got installed, the problem would reappear.
Now with iTunes 10.5, the problem is back. Only that this time it does not matter if Safari is installed or not - the store simply won't come up.
I've tried the whole support articles suggestions up and down - to no avail.
It's not a problem of firewall, antivirus, hosts file etc. - the diagnose function says clearly that even https is OK, all settings in the internet options are right, etc. etc. - I've spent days on that, and believe me, I'm sure about it.
The diagnose function says, however, than QuickTime would not be available. No matter if QuickTime IS installed or not, before or after iTunes 10.5 that says it would neither contain nor need QuickTime anymore.
After cleaning out all Apple software and its traces, a reboot, and a reinstallation of iTunes 10.4.1, the store is accessible again - only that iTunes 10.4.1 can't use my iPhone with iOS 5 on it.
So I'm either stuck with an iTunes that CAN access the store, but can NOT sync my iPhone, or with one that CAN syn my iPhone, but can NOT access the store.
Besides, with iTunes 10.5, the separately installed iCloud control panel app simply won't come up - I can click until I get blue in the face...
Obviously, for iCloud control panel, although it is only listed as "recommended", it seems it's actually "required" to have Outlook 2007 or 2010 - and I have Outlook 2003 and do NOT intend to switch to a higher MS Office package.
I got an appointment at the Apple Store nearby now for Wednesday noon - to revert my iPhone to iOS 4. Then I could at least go on using the iPhone until again the first apps won't support iOS 4 any longer, as it happened shortly after the launch of iOS 4 when iOS 3.1.3 wasn't supported any longer.
Oh, I forgot to mention - during the update/upgrade to iTunes 10.5 / iOS 5, the sync destroyed my recent backup and hung - the only way out was to kill the backup process and continue, which resulted in a "new", blank phone. Lost some years' app data and a lot of important bookmarks that way.
Needless to say that the iPhone was my last Apple product ...

Peter Hah
After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
Look out for "japiohelp".
In short:
a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
b) enter "netsh winsock reset" and pres enter
c) reboot the computer
and Bob's your uncle.
P.

How can I login to Oracle Express Ed 11g Rel 2 on windows XP 32bit?

I installed Oracle Express Ed 11g Release 2 32bit on windows XP 32bit and I can not login ito it. Installation asked for a password to be created at installation which I used to login with.
The login window is started from a shortcut that installation created on my desktop. I tried to download and install three times. I went thru a SW removable before another download. The login responds with "Invalid Login Credentials"
I have admin rights to my PC. What could be the issue?
Please help.
Thanks.

What could be the issue? Could be many different causes. Mistyping the password is one, or the database could be offline but in most cases that will give a different error message. Open a command box, Start/Run/cmd and try:
$ sqlplus /nolog
connect system
... Password ... <the one used with the installer> ... Connected.
select name from v$database;
login window is started from a shortcut If you're talking about the Apex page, the one that opens a web browser to http://<hostname>:8080/apex and that one needs Apex credentials, not database user credentials. Apex users can be mapped to database users but that is something done via the apex administrator.
Two database accounts "out of the box" are SYS and SYSTEM users, those are special- SYS owns the catalog, SYSTEM is a user with dba role privileges, almost as powerful within the database as the SYS user.

Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Ipod nano 6th gen is not recognized by itunes on a PC running Windows XP professional SP3, itunes 10.2

Running Windows XP professional SP3 and itunes 10.2.
I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes (but it shows on my pc as a hard disk) weirder still, my ipod nano 3rd gen works just fine on this computer.
Whats wrong? HELP!!!
I have spent 3 days messing with my pc and have made no real progress.

gltg wrote:
Running Windows XP professional SP3 and itunes 10.2.
I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
I have spent 3 days messing with my pc and have made no real progress.
Then it's time to call Apple tech support while you are still under warranty. Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)

HP LaserJet P2015DN on Windows XP 32bit SP3. Ip address auto-confi​guring?

Similar Messages

Maybe you are looking for

HP LaserJet P2015DN on Windows XP 32bit SP3. Ip address auto-configuring?