HP LaserJet P2035n Is support pcl5 ?

HP LaserJet P2035n Is support pcl5 ? you can install HP LaserJet P2035 with pcl5 in windows 7 similar hp laserjet 1320? (I'm sorry, I can not speak perfect English)

Hi,
Please try the following settings:
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
At the very bottom, uncheck the Allow Manual Duplexing option.
Now try printing and check for any change.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

HP LaserJet P2035n Drivers for 64bit XP

So I tried to use the HP email and live chat support but neither worked because they said my p/n or s/n were invalid and I am pulling them off the printer itself. The issue I am having is with a HP LaserJet P2035N. It is hooked to the network and the driver for xp work the PLC5 ones. I have one computer that is running XP 64 bit and when I go to download the drivers for it there are no network driver for the printer only local drivers. I called the 1800 number and they gave me a website to go to that just redirected back to where I was. Any advice?

The model number HP LaserJet P2035N.
Method 1:
You may refer to the below links and use the troubleshooters. Check if it lists and helps resolve any issues: Open the Printer troubleshooter:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3662026&...
Method 2:
You may check if you have the latest drivers installed for the device. You may refer to the below link for getting the latest drivers and check.
Hp LaserJet P2035n Driver
Good Works..

HP Laserjet p2035n Can't set DHCP

Hello I have a HP Laserjet p2035n connected via a switch to a LAN. The printer had a static IP address configured, and handled print jobs from connected PCs with no problem till yesterday.
The printer stopped responding to print jobs sent accross the LAN. Also, I was unable to access the web admin interface for the printer. I decided to reset it to factory settings and reconfigure it from scratch. I powered off the printer and held down both the GO button and the CANCEL button while powering the printer back on. The indicators all flashed in unison signalling that the printer had been reset.
When I printed a configuration page however, it indicated that the printer was still in manual IP configuration mode with an IP of 0.0.0.0 meaning that it would not pull a temporary IP from my DHCP server. Sure enough, I was unable to access the printer web admin interface after the factory reset.
I tried upgrading the firmware, I tried installing the HP software on my laptop to see if there was a setup programme that would reconfigure the printer ... I tried connecting directly via USB and successfully printed a few pages.
Can someone tell me if there is a way to reset the network connection mode of the printer back to DHCP, perhaps using the buttons on the printer, or some tool that I can download.
Thank you for any help that you could offer.
ELMKD

Hello:
Thank you for your response. I resolved the problem.
A static IP was reserved for the printer by my DHCP server.
The printer experienced a duplicate IP error on the LAN which was not indicated on the configuration page.
The printer was returned to factory default, but could not complete the initialization process (it is unclear why).
Network Information showed the following:
Status = Initializing
Host Name = ...
IPv4 Address = 0.0.0.0
IP Subnet Mask = 0.0.0.0
IP Default Gateway = 0.0.0.0
IP Configured By = Manual
etc...
This meant that the EWS could not be accessed, and the printer would not pull a new IP via DHCP.
Solution
1. Return printer to factory default by powering off, and holding down both CANCEL and GO buttons while powering on.
2. Ensure that there are no IP address conflicts on the network affecting the printer.
3. You may have to connect the printer to a separate subnet to get it to fully initialize and pull a temporary IP via DHCP
4. Print a configuration page by holding down the GO button for 5 seconds and verify that you have a new IP
5. Access the printer web admin page via the new IP and reconfigure the printer as needed. Static IP etc.
I hope that this helps someone else who might be confounded by this problem.
Regards,
Elmkd

How do I connect a network printer to ipad 3. I have a HP LaserJet P2035n. It is a network printer. Not Wireless.

How do I connect a network printer to ipad 3. I have a wireless router on my LAN. I have a HP LaserJet P2035n which is a network printer and it is connected to the LAN. The printer is not on the AirPrint list. The printer is not wireless.

Hello,
I am using a Mac with this router. Any ideas how I can set it up to print wireless. Im not a tech person so this gets confusing for me sometimes.
Thanks!

HT1338 Trying to reinstall hp LaserJet P2035n fails even though Apple says software available.

When I upgraded my Mac Pro to Lion a feature of my LaserJet P2035n went away. The feature was the ability to do manual double sided printing. The feature showed on the printer page but was always greyed out. I have noticed that a recent Mac OS software update included new software for HP printers so I thought I would remove my printer and reinstall hopefully bringing back the lost feature via a new driver.
The printer setup page sees the printer and says Apple has software for it saying "Software for this printer is available from Apple. Would you like to download and install it?" to which I sayd "Download & Install". A new popup window says "Finding Software" then gives me an alert popup saying "The software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software."
I researched the problem a bit and do find a directory "/Library/Printers/hp/laserjet/P2030Series" there but apparently the installation process won't use it.
BTW I'm running OS 10.7.5 and there are no software updates pending.
Further info: I had similar problems when switching to Lion on our three Macs. We have a Lexmark and Brother printer that wouldn't install under Lion. At the time we called Lexmark and Brother and they each provided a script to completely delete all their software after which I could re-install the printers. HP has not been so helpful.
I'm assuming that the install is failing either due to a permissions problem or something else blocking the installation. Has anyone on this list dealt with the problem and have a solution.
Thanks in advance.
SeaJack16

Futher information: I moved the directory /Library/Printers/hp to Unknown and tried a re-install. It took longer to fail but did fail the same way. Looking in the directory it looks like the driver package is incomplete. To me it means that Apple does have the driver package, it just won't completely install because something is blocking it. The question seems to be, what is that something?

HP LaserJet and Color LaserJet - Windows 7 support

To help customers successfully use their products with Windows 7, HP has identified recommended drivers per product. Please visit the following support documents for more information:
HP LaserJet and Color LaserJet - Windows 7 support
Deskjet, Officejet, or Photosmart
If you are having an issue with a windows 7 software install or driver, please start a new thread for greater visability.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Not to be confused with the title of this thread, because this tool will not work with installing most LaserJets, but try the HP Printer Install Wizard and let me know any error messages you get.
I will need to know quite a bit of information before I can be of much assistance, otherwise:
1. What error messages are you getting (ex. fatal error 1603)?
2. How are you trying to connect the printer (USB, wireless, etc)?
3. What happened when you used the HP Print and Scan Dr?
Lastly, If you do not answer these questions and others I know I will have, then I wish you the best of luck with your printer installation. Do not be mislead, just because I do not work for HP doesn't mean I'm not an expert.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Network drivers for Laserjet p2035n

I'm setting up a Laserjet p2035n networked printer on a Windows 2003 server, that is already set up on another computer.
I have the IP address and create a new standard TCP/IP port but the HP website only has USB drivers (even for the N). I just need plain network drivers.
Please Advise.
This question was solved.
View Solution.

Hi,
You may either use the standard Plug and Play drivers by running the installation, then terminate it and add the printer through the Windows have a printer dialog. the software can be downloaded from here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
Select Add a Printer and follow the steps by creating a Standard TCP/Ip port by providing the printer IP address.
Follow the steps till the model selection is listed.
Click Have Disk and browse to C:\Program Files\HP\HP LaserJet P2030 Series (May also be listed under Program Files (x86) for 64-bit OS), from there select the displayed INF file and select your printer.
Follow the steps to complete the wizard.
For standard network installation you may use the full software below:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

LaserJet P2035n repeate printing until paused and cancelled

I had a non-recoverable systems crash in Win7 Pro. After reloading the boot drive, My P2035n (PN CE462A) will not just print a single page, but will print that page continually until I pause the printing and then cancel the page. I have reloaded the drivers with no change. I do have the settings set for a single page. Can anyone help me? I have only had this printer since last June. HP says it is no longer supported.
Help!

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Laserjet P2035n is set to print double-sided, but I can't change it in the preferences

Last week i downloaded and printed a PDF file. Since then, my HP Laserjet 2035n is set to print double-sided. Here are the details.
I'm running an HP Pavilion Laptop with Windows 7 Home.
The printer is set up as a network printer.
When I try to print something, it stops after one page waiting for me to re-feed the paper manually to print on the other side.
It's only this laptop that's messed up. My other computer prints fine
When I go to Printers, right click on the 2035n, and select "Printer Properties" and look at the bottom of the General tab, it reads under Features "Double Sided: Yes"
If I then click 'Preferences..." and go to the Finishing tab, under Document Options, the box "Print On Both Sides (Manually)" box is unchecked.
Here's what I've tried:
I have uninstalled and reinstalled the printer
I reinstalled the printer drivers
I have tried reinstalling under a different name
Any suggestions? Can someone tell me where the printer preferences file is so I can manually delete it then reinstall the printer drivers? Is there a tool for the P2035N to uninstal EVERYTHING related to it?
Thanks.
This question was solved.
View Solution.

Hi,
Please try the following settings:
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
At the very bottom, uncheck the Allow Manual Duplexing option.
Now try printing and check for any change.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Laserjet Pro M1217nfw, support for ePrint Home&Biz on Android devices

Got my new LaserJet Pro M1217nfw installed on my home (secure)wireless network and am printing wirelessly from 3 windows laptops.
Started trying to get my smartphones to connect and print to it. Droid X Verizon, running gingerbread latest Verizon update. Download ePrint and ePrint Home & Biz to it. Upgraded my printer to latest firmware and SmartInstall, got an EPrint email address assigned to it. Am able to ePrint from phone just fine, but Home & Biz does not print, it detects printer and says has printed the file, doc, or pic but nothing comes out on the printer. I see from your lists of supportted printers that it is not
supported on th 1217nfw. Is it planned to work on it in the future? Can you give my some hints or workarounds if it is possible to get Home and Biz to work?
I tried the Wireless Direct feature on the printer, but really don't understand its purpose, since the printer and my phone are both
connected to my local wireless network, why does the wireless direct use a different SSID and assigned a fixed IP address?
anyway disabled that feature.
Thanks for any help!
This question was solved.
View Solution.

At this time ePrint Home&biz app is not supported on the HP Laserjet Pro M1217nfw. Other than ePrint using the printer emial address there isn't another solution with an Android device.
I am an HP employee

Hp laserjet p1008 not supported in windows 10

i have upgrade to windows 10 recently. the hp laserjet p1008 is shown connected correctly. But i can't take a print out. What should i do. i am working on Hp desktop with i3 processor.

Hi, Please try: http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-P1000-Printer-series/3435686/model/3435687#Z7_3054ICK0KGTE30AQO5O3KA30R1 Good luck

Printer HP LaserJet p2035n

I've used this printer for over a year without a single problem and all of a sudden it's switching out the 6's for letters and letter O for the number 0.......It looks perfect on pc but when I print it out it's switched a lot of it. What in the world is going on with this? Please help me!!

Hello Kari & welcome to discussions...
Have you updated the printer drivers?
http://support.apple.com/kb/DL907

Manufacture date for the HP laserjet P1505n & P2035n

When where the HP LaserJet P1505n and HP LaserJet P2035n release on the market?

baltwo wrote:
Search much? See http://discussions.apple.com/thread.jspa?threadID=2131363 and http://discussions.apple.com/thread.jspa?threadID=2145258 for starters.
Read much? The P1505 is not listed in either of those threads.

HP LaserJet 2035n printer will only print one page at a time

Recently I have installed the HP LaserJet P2035n with Windows XP. While taking printouts, its not printing more than one page. Already I have checked PCL setting for Manual feed as OFF and paper settings as A4. Pls help.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP P2035n not recognized after migration from Airport

OS X 10.5.8/intel (multiple computers) and one 10.6.3
Installed the P2035n software from included CD (which matches the latest version available from HP site).
We had our HP LaserJet P2035n connected via USB to our workgroup's Airport Extreme Base Station, and had various Macs connected to the Airport via wireless, and 1 directly via ethernet (and the Airport was connected to the University WAN/internet via ethernet). In this situation, installing the printer always went flawlessly, and we could select the printer from the "Add Printer" dialog (Default tab) and it would automatically detect the printer model (HP LaserJet P2030 Series) when selected.
We had to take down our Airport and are now all connected via ethernet to the local network/internet. When setting up the printer again via IP -> LPD (or IP -> IPP, or IP -> HP JetDirect), the printer only comes up as "Generic PostScript Printer".
Picking "Select a driver to use..." does not have "HP LaserJet P2030 Series" as an option (closest match is the "P2015 Series" plus the usual array of other printer types and brands).
The printer Self Test page clearly shows an IP address given to it, and we can connect to the printer options via its internal web server, and a WinXP machine can print to the printer after installing the driver downloaded from the HP site.
The firmware is 20081120, which is the newest version, I believe.
In /Library/Printers/PPDs (10.5; 10.6 has an extra P2055.gz file), I have the following (notice lack of P2030.gz) files:
HP LaserJet P2015.gz
HP LaserJet P3004.gz
HP LaserJet P3005.gz
HP LaserJet P4010_P4510 Series.gz
We have other printers connected to the network the same way (direct ethernet connection), and those models were recognized immediately (Lexmark T430, HP LaserJet 2200, and HP Color LaserJet CP3525) by all the computers we're using after entering the IP# in Add Printer > IP > LPD.
It's only the HP P2035n that's giving us trouble. I've also tried manually installing the HP PPDs directly from http://support.apple.com/kb/DL339 , which had previously shown up (and been installed) via Software Update.
I tried to connect the printer via USB directly into one of the computers, and the computer immediately found and recognized the correct model (P2030 Series). However, unplugging the USB printer, removing the installed printer from the PrefPane, and trying again via IP/JetDirect printing failed once more.
What can I do to have the correct printer model be recognized for the HP P2035n when not using a USB connection?

So I downloaded Apple's HP drivers for 10.6 from http://support.apple.com/kb/DL907 and installed them on the single 10.6 machine we have in the group (the previous attempts at this were on 10.5 machines with Apple's 10.5 drivers).
Installing those drivers let the 10.6 machine properly determine the correct printer model when installing it.
Looking at the package receipt (and http://support.apple.com/kb/HT3669), the 10.6 drivers do include a printer description for the HP LaserJet P2035, but it is not there in the list for the 10.5 printers (http://support.apple.com/kb/HT1893).
So why are the 10.5 machines only installing the printer properly when connected via USB? Does the printer have an internal PPD copy that it can only distribute via a USB connection? Or how can I get a copy of the PPD for 10.5 (the 10.6 PPD points to paths that don't exist on the 10.5 machines (/Library/Printers/hp/laserjet/hplaserjetzjs.bundle/), so I doubt I can just copy the 10.6 version and have it work properly.

HP LaserJet P2035n Is support pcl5 ?

Similar Messages

Maybe you are looking for