HP Laserjet P2055dn and windows 8 PCL6 error

Hello everyboby,
I have a network of two PCs and a networked HP Laserjet P2055dn. The PCs were in windows xp pro and everything go fine. I have changed their PCs with Hp Pro and windows 8 64bits as OS. Since the PCs are windows 8, both users have random PCL6 errors when they print. It does not occur everytime. I have updated the printer firmware to latest ==> same issue.
When i look at the printer configuration, i see that Laserjet P2055dn supports Pcll5e and ps but no PCL6. But on the HP site, for windows 8, there's only PCL5 and Ps driver !!! Anyway, i have tried each driver: PCL6, full software solution driver, Universal print ==> same issue.
Does anyboby has encounter this issue ? What is the solution ?
Thanks to everybody for interest, Sincerly yours, David from France

AlarconDavid,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Problem with syncing iPod ... Itunes and windows show errors... itunes 7...

hey guys... since I upgraded to itunes7 my ipod (4th gen click wheel) doesnt sync poperly! it all began when I was syncing the ipod and my screen just froze a few secs after connecing the ipod! I had to restart the computer and reset my ipod... from that time had alot of trouble!
first the screen froze immediately when I connected my ipod with the pc and later when i had formatted it with windows several times and resetted it a million times with itunes7, itunes and windows show errors (error (-124) while syncing and everything stops! I've just spent nearly two nights on that and really hope that my ipod didn't break just because of itunes7! to stay in proper english and not get that angry in letters that I am in mind--- please so help me... my ipod is everything and im a music junkey! by the way... itunes itself works perfectly... if i not sync! how peculiar that getting back to itunes6 is impossible...i tried it... does it hav a spec reason, hah!
IBM, Pentium3 (666MHZ), FW(desire to fire), Ipod Click Wheel Windows XP 30cm

I tried formatting the ipod with windows! in the end of it windows says that it was not able to format the drive properly. then I click ok, open itunes, restore the ipod, try to sync again and have the problem that after a while the whole thing freezes... no more errors....just from the moment i disconnect the ipod manually from the cable, everything gets back to normal life again! I do not know what to do! do you guys think, my computer is too old or maybe my ipod's broke???
I'm despairing people...never had problems like that until itunes7! I tried as well to close all the other working programs with the task manager... doesn't change it!
Thx for the help!
Christopher
IBM, Pentium3, FW(desire to fire?)...doesn't really matter Windows XP

HP color laserjet CP2025dn and encountered an Error 58.04

I have a HP color laserjet CP2025dn and encountered an Error 58.04, any suggestion on what to do?

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Printers - LaserJet.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Laserjet 2055D and Windows 8.1 - 49 ERR 3D90A44

Hello
I have a brand new Laserjet Printer, the installed driver is a PCL6 - and when I want to print via USB, a blank paper is coming out and then I see this error message on the display:
49 ERR 3D90A44
I have already tried to install the newest firmware, resinstall all drivers etc. - but no effect. Do you have any idea?
Regards from Switzerland
mbg_ch

Hello Candi_970,
Welcome to the HP Support Forums!
I see that when you try to set the printer setting "Print directly to the Printer" for the Laserjet 1018 on Windows 8.1, but it will not allow it.
You could try running the Print and Scan Dr on the computer. This will not allow you to set the "Print directly to the Printer" setting, but it could fix a driver or software issue the is preventing it.
Let me know if this has helped.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP LaserJet P2055dn and Printing from Adobe Reader

Everything prints just fine from my Mac Mini, EXCEPT: for some strange reason PDF files that are opened via Adobe Reader are taking forever to print. It's as if it's taking a break. One page will finally print, then it stops and nothing happens for over 5 minutes.
The green light on my HP Laserjet is blinking which shows that it's planning on printing another page. What is up with this?
Typically, in regards to Word, Excel files OR even when I print an email OR even a page from a website.... the printer starts immediately and knocks it out.... FAST!
But, when I go to print PDF files that are opened using Adobe Reader.... its like pulling teeth.
My software is OS X 10.8.2.
My printer is HP LaserJet P2055dn
PLEASE HELP! THIS IS DRIVING ME NUTS!

There's no printer setting for BITMAP. However, I did find 2 settings that I changed.
1. In the PRINT window there was a drop down asking for document and markup. I changed this to just document.
2. There was a checkbox that says: PRINT AS IMAGE. I clicked this.
NOW, it prints fast like all of my other stuff. I'm not sure which of the above 2 items did the trick but it did. Now I have to figure out how to set these as DEFAULT SETTINGS.
What do you use to open PDF files if not Adobe Reader? Last week I moved Adobe Reader to the trash but none of my PDF files would open without it.
I appreciate any comments suggestions.

Creative Webcam Vista, Windows 98, Msn 7.0 and windows protection error

Hi I wondered if you could help me.
Im running Windows 98 and have a creative webcam installed. i connect it and it works fine in creative webcam monitor. but when in msn messenger 7.0 i click tools-----> webcam settings the computer then freezes up then after a few minutes the screen goes black with "Windows Protection Error Please Restart Your Computer" comes up.
I'm also running
McAfee Internet Security 7
Spybot
Ad-aware
Spywareguard
A-squared
Spywareblaster
Ive also tried running defrag and scandisk to no avail.
Thanks.

Can you stop the service manually? I would suggest stopping the service, setting it Manual or Disabled, rebooting, and then run the uninstaller again. Hopefully you won't have to resort to uninstalling the service manually.

HP LaserJet 1018 and Windows 8.1

Hello,
I was trying to select the "Print directly to the Printer" option under my 1018's printer properties, but I keep getting the following:
"Printer Properties
Printer settings could not be saved
The specified datatype is invalid"
Can anyone instruct me as to how to fix this? Please let me know ASAP. Thanks!

Hello Candi_970,
Welcome to the HP Support Forums!
I see that when you try to set the printer setting "Print directly to the Printer" for the Laserjet 1018 on Windows 8.1, but it will not allow it.
You could try running the Print and Scan Dr on the computer. This will not allow you to set the "Print directly to the Printer" setting, but it could fix a driver or software issue the is preventing it.
Let me know if this has helped.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Dns_probe_finished_no_iternet and windows update errors

I have windows 8 and have been having problems lately. Whenever windows wants to do an update and I wait for too long the internet goes out and displays the error message dns_probe_finished_no_internet. there are very few times when it happens and windows
does not need to update.
Another problem is that when I do go to restart the computer for the windows update only to have it say that it failed and tries again in a few hours. I tried updating them individually but none of them worked.
I have also tried to restart the dns client in services, but it won't work anymore.
I tried looking this up but any solution I have found hasn't worked. Can someone please help me, I'm at the end of my wits with this.

Hello Dieya105,
To avoid misunderstanding, do you mean receive error message‘dns_probe_finished_no_internet’ when you use Windows update or in browser?
Please share us a screenshot for better analyzation.
Have you run all the command ”netsh int ip reset, ipconfig /flushdns, netsh winsock reset” I mentioned in my last reply?
If the error code is in browser, please run the command ping 8.8.8.8 and ping
www.bing.com and check if you receive the normal respond.
Please take a look at the following thread similar to this issue.
http://en.kioskea.net/forum/affich-770260-dns-probe-finished-no-internet
I suggest you to use antivirus software to scan for the malware.
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Printing double-sided problem, Leopard, Laserjet P2055dn and Quark XPress

I've also asked about this in Quark's forum.
Printing a Quark file double-sided to the Laserjet using Leopard - first third of the sheet (A4 landscape) is blank on both sides).
This does not happen on Tiger, same file, printer and version of Quark.
Printing from any other (text) app (Acrobat pdf, Word, TextEdit, InDesign) whether on Tiger or Leopard is correct.
Any suggestions, please?

Possible solution for p2055dn and other printers using Leopard
See this reply from deving 280 post re open source drivers
http://h30434.www3.hp.com/t5/Mac-printing-and-scanning/HP-Color-Laser-Jet-3600dn -unresponsive-in-Snow-Leopard/td-p/115982/page/2
Tried this open source driver idea and eventually got the P2055dn working properly with Leopard.
NB - Follow the instructions and then use the open-source driver instead of the HP one.
Will report back if any problems arise.

Printer error with HP Laserjet 6L and Windows 7

I have an old but still functional HP Laserjet 6L (from the late 1990s), which is connected to a new computer running Windows 7 via USB. Windows 7 found the necessary drivers, but I am having frequent printer errors come up in the Printer queue, and the machine refuses to print. The problem is 'solved' when I restart my PC, and the document then prints. However this is a pain, and I obviously don't want to have to restart every time I want to print.
I would be very grateful for any advice on this. Thanks.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP laserjet 4 and window 7

I recently bought Compact Presario with window 7. i am trying to add the laserjet 4 so i can print. The laserjet 4 is connected through Home network. The computer see the printer but give error "cannot find .INF " file. I am not sure what do to. I also purchased a dell Notebook with Window 7 and it connects to the Laserjet on home network without nay problem. I cannot download the driver software for window 7 as the site says it is in window 7. HELP HELP

Go to the Devices and Printers folder, Add a Local Printer, Create a New Port, Local Port, \\xpcomputer\lj4sharename (with the correct share names for the computer and printer shares), Next, Windows Update, then under HP (not Hewlett Packard) select the HP Laserjet 4.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP LASERJET SERVICE and WINDOWS 7 PRO CRASH

My windows 7 pro 64bit will lock up every so often and when I restart and run the Windows reliability monitor there's always a critical error "HP Laserjet Service" which stopped working right at the same time as the crash.
In msconfig/services the box is checked and the status is stopped.
That critical error message is always the only one listed by the way.
Printer is the P1102W and I'm only using the wifi.
Printer always works fine.
Appreciate any suggestions.
This question was solved.
View Solution.

Hi aelumley , Sorry to hear you are still having issues. After reinstalling the printer, the icon is now grayed out.
Did you try turning the Laserjet Services in the Startup items back on again to see if that would fix this issue?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
I would run the Microsoft Fix It Tool to see if it will help.
Diagnose and repair Windows File and Folder Problems automatically.
Sfc /scannow will inspect all of the important Windows files on your computer, including Windows DLL files. If System File Checker finds an issue with any of these protected files, it will replace it.
How To Use SFC /Scannow to Repair Windows System Files.
If you have another computer, install the printer on it to see if you have the same results.
Please let me know the outcome.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problems with HP Laserjet CM1017 and Windows 8.1

I have a HP Laserjet CM1017 MFP printer and I just upgraded from Windows 8 to Windows 8.1.
Now when I go to Control Panel/Devices and Printers/Adjust Print Options, I get an error message:
"Function Discovery Print Provider DII has stopped working"
I also get this message:
"Function address 0x11272fc8 caused a protection fault. (exception code 0xc0000005) The application property sheet page(s) may not funtion properly."
How do I fix these errors?

@tenkeypro
First, I would suggest you uninstall the exsisting driver and reinstall following one of these documents to see if it will clear this error message:
Install HP print and scan software on a Windows 8 computer (32-bit and 64-bit)
Universal Print Driver (no scan)
Driver support included in Windows 8 / Windows 8.1 or in Windows Update
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

LaserJet 2200 and Windows 7 Professional 64-bit - a mutual disagreement society?

In upgrading my XP Professional system to Windows 7, I've got a real problem linking to my LaserJet 2200d printer. The store that did the upgrade mistakenly upgraded to 32-bit Windows 7, but the printer worked fine. In doing the proper upgrade to 64-bit 7 Pro, a problem arose - nothing prints and the data light on the Laserjet 2200 does not even flash. Observables:
1. I've tried all the 64-bit drivers published from Microsoft via Windows Update and from HP. Nothing works, including the universal printer driver and regressing to the 32-bit driver.
2. The printer shows as installed, but with a yellow, triangular warning sign, yet there are no details on the problem or suggested fixes.
3. Windows Troubleshooter doesn't fix the problem.
4. I thought to uninstall all the drivers and start fresh, but links to HP's driver uninstaller yield a "page no longer available" error message.
I use this printer as my workhorse - sure would appreciate some help. I'm a nontechie, so step-by-step instructions would be very helpful. Thanks!

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at HP Enterprise Business Community.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

DTM 6.0 sync error 2753 and windows installer errors, please help

I have tried install and uninstall over 5 times with the same errors
, this is what happens when i install
when i start to install DTM 6 on Win7 64bit, first message i get says.
Windows Installer, Pending Microsoft Visual C++ 2008 Redistributable, it tried to install this but then says failed to install even though its already installed, therefore i cancel this carry on with the install which completes.
Now when i run the application and click on back up, i get a box saying The error message says, " The feature you are trying to use is on a network resource that is unavailable". It is looking for the Apploader.msi file in the C:\Documents and Settings\user\Application Data\Research In Motion\BlackBerry\ directory.. i have tried looking for Apploader.msi but it does not exist so i have to cancel, if i keep pressing cancel it does eventually backup. but i can not sync as every time i try to setup the sync config setting i get a error message. error 2753 The file MsOutlookApiProxy64.exe D9D285E5_C9F0_4101_A12C_555AE1C1593F is not marked for installation
I have tried searching the web but no one can help, Like you say what the point if i can't sync.
Please if anyone can help fix this, i would regard them as genius
Solved!
Go to Solution.

Hi beeman,
Try clean uninstalling then reinstalling the Blackberry Desktop Software 6.0 following this KB article. http://bbry.lv/da1SoE
Hope this helps,
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

HP Laserjet P2055dn and windows 8 PCL6 error

Similar Messages

Maybe you are looking for