HP LaserJet p3005 prints black pages

Hi
I have a problem with a HP laserJet p3005 it prints always black pages (like this) i install a new toner cartridge but i still have the same problem.
Please help me to troubleshoot my problem.
Thanks.

Looks like a high voltage power supply issue with the black only.  Since the laser/scanner on this model uses 1 motor for 2 colors that would eliminate the laser/scanner.  Repair by a repair shop may cost more than the printer.  Only suggestion I can give to is do a google search for the service manual and download it.  Look for instructions for the removal of the high voltage ps and remove it and then put it back in.  There is always the possibility one of the connectors has become loose and is causing the issue.  Good Luck.

Similar Messages

  • HP Color LaserJet 2605dn - prints black pages over print

    thanks, I pulled out all the cartridges, and they all look the same on the left side, all look to be the same, so don't see anything out of place. Wiped down the inside while everything off and out, and reinstalled cartridges.  First test print from button on back came out perfect (was so excited) so I tried a second test print, and the black came back on about half the page, then a third test print and the entire page was almost covered (no longer excited) Hopeully original and these photos get approved to help show what I'm seeing.  Here is picture of contacts:   Here is picture of the three pages printed:   

    Looks like a high voltage power supply issue with the black only.  Since the laser/scanner on this model uses 1 motor for 2 colors that would eliminate the laser/scanner.  Repair by a repair shop may cost more than the printer.  Only suggestion I can give to is do a google search for the service manual and download it.  Look for instructions for the removal of the high voltage ps and remove it and then put it back in.  There is always the possibility one of the connectors has become loose and is causing the issue.  Good Luck.

  • HP2420 Laser Jet printer only printing black pages

    I have an HP2420 laser jet printer that is only printing black pages.  I have tried 3 different toner cartridges so the cartridge is not the issue.  I saw that there are maintenance kits.  Could these help solve my problem and if so, how do I use them?
    Many thanks

    Okay, now where was the paper jam located? Was there any paper torn off when you cleared the jam? As I stated before, almost sounds like a voltage problem, might be one of the contacts might be having an issue. Also, since the machine is new, I would suggest contacting HP, the machine should still be under warranty, if it is in fact new, and see if they can either provide service for it or just replace it. That is of course if you do not get it resolved.

  • My HP LaserJet 1536dnf Printer is printing black pages after replacing toner with a new one!

    I changed out the toner cartridge for my HP LaserJet 1536dnf printer with a genuine HP toner cartridge and now it is printing out black pages.  Any suggestions as to how to fix this?
    Thanks!
    This question was solved.
    View Solution.

    Hi @Beaglemom49779, 
    I see by your post that you replaced the toner and are now getting all black pages. I can help you with this.
    Did you have the same issue with the printer before replacing the toner?
    It could be a hardware or fuser issue with the printer.
    If the issue just started after replacing the toner then most likely it is the toner.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
    Number one cause of toner issues.
    Inspect the toner cartridge for damage:
    1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
    2. Check the memory chip for damage.
    3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
    CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
    Fingerprints on the imaging drum can cause print-quality problems.
    4. If you see any scratches, fingerprints, black on the drum, or other damage on the imaging drum, replace the toner.
    5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
    Please call our technical support if the there is a issue with the toner and inquire about a replacement, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Contact HP.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • C5280 prints black page when copying and scanning

    Can anybody help please.
    C5280 prints a black page when I want to copy or scan but it prints ok from the computer. The light seems to be working on it. I am unable to reinstall with the disc as the CD drive is not working now. Does it need to be reinstalled.
    Thanks for any help possible.

    Hi @Dani77 ,
    I see by your post that you are getting a black page when copying and scanning from the printer. You can print fine and you updated the HP software, the printer is connected directly to a wall outlet and you have the same results.
    I would really like to be able to help you resolve this issue.
    I wasn't sure whether you just updated the printer software on the printer or the firmware.
    If you haven't already, please update the printer's firmware. HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
    Disconnect the USB or Ethernet cable from the printer.
    Make sure the printer is still connected directly to a 3 prong wall outlet.
    Try making a copy with a blank sheet.
    If the output is blank, then try and copy a text document.
    I will send you another step to try in a private message.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet)
    Please let me know the outcome.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Laserjet CP1525 printing test page but not other documents

    My laserjet printer is not printing any documents. When I got into the properties, the properties program freezes. For some reason the test page prints, but when I try to get anything else to print it won't do it. The IP address has not changed, but my wireless was down for a short time this AM. Can I disable to printer and then re-enable it again without having to hook up the ethernet cable to get the wireless to work correctly?

    Did that. Now I can't even print a test page. Do I have to reinstall using the ethernet cable because I do not know the steps to doing that and I just removed the printer and then reinstalled as a local printer. It doesn't seem to be connected at all now. It says its connected onthe LPT port and it is just on wireless. It still prints config pages so it's working.Can you tell me the steps to doing it with the ethernet cable?

  • My hp laserjet 6p prints test page, but not items in queue.

    My HP LaserJet 6P prints a test page when I push the button on the top, but does not print documents in the cueue.  I installed the latest drivers from HP to no avail.  I tried switching USB ports, also to no avail. I am able to delete documents from the queue.

    Please read this post then provide some details.  What operating system?  Are there any error messages on the printer or computer screen?
    If you are running Windows 7 or Windows 8 the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP LaserJet 4MP Printing Blank Pages

    Hi there,
    This is perhaps OT, but a recent issue with my HP LJ 4MP is causing me great anguish and heartache.
    Suddenly, for no apparent reason, my HP is producing blank pages. It just runs and runs spewing out blank pages.
    I've tried all the IO resets and a cold reset. Unplugging and leaving idle. Unplugged the Asante bridge between the serial and the CAT 5.
    After a while I can get it to stop printing blank pages, it works fine for a while, then the interminable blank pages start again.
    Has anyone seen such an issue? Any known resolution?
    Thanks a bunch,
    Matthew

    Matthew,
    I too use HP LaserJet 4MP and AssanteTalk Bridge connected to computer via ethernet crossover cable and link from Assante to both my LJ4MP and HPDeskJet855cse, using BelKin QuikNet adapters in a string using RJ11 jumper cables.
    My HP driver software is HP8.1.1.
    I Never use "BackGround Printing".
    I Never use "DeskTop Print Monitor".
    The only time I can remember multiple blank copies is when I used to use "Print Monitor and BackGround Printing".
    Clear your preferences and get rid of Print Monitor and Don't use BackGround Printing.
    HTH.......Bob

  • HP Laserjet 4 Prints unwanted page on start!!

    The first time I print after I first turn on the printer it insists on printing a page with often just the letter "M" ot "1M" in the top L/H corner. 
    It certainly never used to.  I dont know what this is or how to stop it.
    The PC has been rebuilt several times so it's not picking it up from there.
    Can anyone tell me what it is and how to stop it?
    Thanks

    My HP Laserjet 4P prints the following letters on the first page: -12345X@PJL COMMENT HP Laserjet 4P @PJL SET PAGEPROTECT=OFF @PJL PAGEPROTECT=A Would appreciate any help with this problem [Personal Information Removed]

  • Officejet K80 printing black pages

    My Officejet K80 was working perfectly for 3 years and two days ago started printing each page solid black within the margins of the printed page.  Holding a printed page up to the light shows that the desired printout is there, but the entire page is printed with black ink within the margins of the page. Tried disconnecting the printer and driver and then reinstalling, but still get each page, including the "Print Test Page" printed with a large black square over the desired printout.  The system is Windows Vista, but it was working great so I don't think it's a system issue.  Has anyone heard of this problem before and is there an easy fix?

    Hi - Try clicking on the Windows icon (lower left), then Devices and Printers, right click on the v40 and click Printer Properties.  From there, click the Advanced Tab and click on Print Directly to Printer.  I've seen this resolve issues related to printing from the internet.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • LaserJet 1012 Prints half page

    I'm trying to print a 5 x 8 page  (I've tried other custom sizes too, with the same result) from Word.  The HP LaserJet 1012 cuts the page about 2/3 of the way down.  This page will print from my other HP printers and from a Brother printer with no problems.  I've tried setting the 1012 to a setting of printing on 5 x 8 (it's already set that way in the page set up in Word), and on 8 1/2 x 11, and in both cases it cuts off the page.  What to do?

    Okay, need a little more definition on the issue. When you say it prints 2/3 of the page, how exactly......does it only print 2/3 of the text when it reaches the bottom? or does it cut off 2/3 of the way down the page and leave 1/3 of the page blank? and are the borders looking normal at the same time? is it always text that is cut off or are pictures involved?
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Hp laserJet 1020 printing black paper

    i'm trying to use HP printer , but i can't print in a clear way , all paper like example image ,, 
    i need help to fix it .
    This question was solved.
    View Solution.

    Hi FawzyZayed,
    Thank you for providing the screen shot. I can see that the printer is printing black all over the page. I would like to help you.
    Inspect the toner cartridge for damage:
    1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
    2. Check the memory chip for damage.
    3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
    CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
    Fingerprints on the imaging drum can cause print-quality problems.
    4. If you see any scratches, fingerprints, toner on the drum or other damage on the imaging drum, replace the toner.
    5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
    I have provided a document for cleaning inside the printer and running a cleaning page, resetting the printer and checking the driver settings. Resolving Print Quality Issues.
    Try printing a document again.
    Let me know the results.
    What kind of paper are you using?
    Try another type of paper to see if you have the same results.
    Are you using Genuine HP Toner?
    What is the toner level?
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • LaserJet P2035 prints blank pages.

    It started with printing out duplicate lines that overlapped. Now all it does is print out blank pages. After each page prints out the light blinks next to the triangle symbol. And then I have to power off and power back on to clear it. I have installed the newest driver, upgraded the firmware on the printer, installed a new toner, and replaced the USB cable. Any suggestions on what to look for? I have about five of these printers and the rest are fine (so far).
    Thanks,
    Josh

    Hi @tps1020 ,
    I see that you are having issues with the pages coming out blank. You have already replaced the toner and you still have the same results. I would like to help.
    Most likely it is a hardware issue with the printer or the software, since you replaced the toner and are having the same issue.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
    This ensures the printer is receiving full power and may help this situation. Make sure the USB cable is connected directly to the computer.
    Unfortunately there is no hardware self test for this model. Usually to find out if it is a hardware or software issue, you can print the hardware self test to determine this.
    Try and print a test page from the printer driver.
    Did it print?
    If the issue persists, uninstall and reinstall the software, just to rule that out.
    Uninstalling the Printer Software.
    HP LaserJet 1020 Printer Drivers.
    Test the printer again.
    Are you using Genuine HP Toner?
    Is the Ready light on the printer?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    Please let me know the results.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • LaserJet 1020 prints blank pages

    My LaserJet 1020 printer prints nothing but blank pages no matter what kind of print job I give it. The HP Print and Scan Doctor found nothing wrong, but when I printed a test page at the end of the Print and Scan Doctor's testing, the output paper was also blank. I installed a new cartridge because I thought the old one was out of ink, but the problem reoccurred very soon.

    Hi @tps1020 ,
    I see that you are having issues with the pages coming out blank. You have already replaced the toner and you still have the same results. I would like to help.
    Most likely it is a hardware issue with the printer or the software, since you replaced the toner and are having the same issue.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
    This ensures the printer is receiving full power and may help this situation. Make sure the USB cable is connected directly to the computer.
    Unfortunately there is no hardware self test for this model. Usually to find out if it is a hardware or software issue, you can print the hardware self test to determine this.
    Try and print a test page from the printer driver.
    Did it print?
    If the issue persists, uninstall and reinstall the software, just to rule that out.
    Uninstalling the Printer Software.
    HP LaserJet 1020 Printer Drivers.
    Test the printer again.
    Are you using Genuine HP Toner?
    Is the Ready light on the printer?
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    Please let me know the results.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Printing black pages

    I have Laser jet Pro MFP 127fw multifunction printer. A few days back there was paper jam. I removed it as per the procedure. Since then wheneverI print, it gives out completely black pages. Any quick solutions to resolve this issue. Thanks

    Okay, now where was the paper jam located? Was there any paper torn off when you cleared the jam? As I stated before, almost sounds like a voltage problem, might be one of the contacts might be having an issue. Also, since the machine is new, I would suggest contacting HP, the machine should still be under warranty, if it is in fact new, and see if they can either provide service for it or just replace it. That is of course if you do not get it resolved.

Maybe you are looking for