HP Laserjet P3015 double sided - the last odd page prints on the same page when printing two copies

HP Laserjet P3015 double sided printing is set up on Windows 7. When printing two copies of a document, if it has odd number of pages, the last page is printed on both sides of the page. There is no page feed for the last page.
Suppose say there are 3 pages in a document and you want to print two copies. It prints like 1/2, 1/2 and 3/3. The third page (odd number) print on the same page. The last page page does not print on two pages.
It works alright on Windows XP.

Hope that you have configured the correct paper type and size in the printer hardware and also selecting the same paper tray, size, type from the printer driver while printing.
It may be caused due to the job formatting done by the application software or some jobs settings done from the job/application or printer driver. Check by toggling the 'collate' option and also try to print from a different application software.
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP)

Similar Messages

For some reason i have two accounts and I want to cancel one of them. they are yearly contracts but i dont want to pay double for the same product. How can I cancel one account?

for some reason i have two accounts and I want to cancel one of them. they are yearly contracts but i dont want to pay double for the same product. How can I cancel one account?

Is it possible that you are using the same password for the old O2 Study and newer O2 Apple Base Station networks?
If so, Keychain Access is storing the old information about the old network and may be associating it with your AirPort Extreme settings based on the BSSID that William has mentioned.
If that's the case, open Macintosh HD > Applications > Utilities > KeyChain Access and look for a listing with the old network name. Delete this entry. You may need to power down both the computer and the AirPort Extreme and restart them.

Why does safari show the last used page when the Ipad is turned on again

Why does Safari show the last used page when the IPad is next used?

Read this article: Open iOS Safari to a blank page, http://www.macworld.com/article/159303/2011/04/ios_safari_blank_page.html

How do I get System.out.format to print out doubles with the same precision

Using the System.out.format, how do I print out the value of a double such that it looks exactly like it does if it were print from a System.out.println.
For example, take the following code:
double d = 12.48564734342343;
System.out.format("d as format: %f\n", d);
System.out.println("d as sout: " + d);Running the code, I get:

d as format: 12.485647
d as sout: 12.48564734342343

The precision of d has been lost.
I could bump up the precision as follows:
double d = 12.48564734342343;
System.out.format("d as format: %.14f\n", d);
System.out.println("d as sout: " + d);That appears to work, I get:

d as format: 12.48564734342343
d as sout: 12.48564734342343

However, that solution fails if d has a different precision, say 12.48. In that case I get:

d as format: 12.48000000000000
d as sout: 12.48

So how do I get System.out.format to print out doubles with the same precision as System.out.println?
Thanks..

YoungWinston wrote:
Schmoe wrote:
Interesting, but this is not what I am looking for...Your original question was "how do I print out the value of a double such that it looks exactly like it does if it were print from a System.out.println", and you've been told how to do that (although the pattern given by sabre may be a bit excessive - you should only need 15 '#'s).The initial phrase from my question was "Using the System.out.format, how do I..".
It's worth remembering that, unlike the Format hierarchy, 'format()' is NOT native to Java. It's a convenience implementation of the 'printf()' and 'sprintf()' methods provided in C, and first appeared in Java 1.5. Those methods were designed to produced fixed-format output; 'println()' was not.Perhaps it is the case that this can't be done.
Furthermore, Double.toString(), which is what is used by println() does not produce the same format in all cases; format("%.14f\n", d) does. TrySystem.out.println(1.8236473845783d);
System.out.println(1823647384.5783d);and you'll see what I mean.I am fine with that. It still displays all the precision.
I am simply looking for a way to quickly print out multiple variables on a sysout while debugging. I want it as syntactically sweet as possible. System.out.println can be a pain when outputting multiple variables like the following:
"System.out.println("a: " + a + "; b:" + b + "; c: " + c);"
For some reason, my fingers always typo the plus key.
I was hoping that System.out.format would be easier,along the lines of:
"System.out.format("a: %f, b: %f, c: %f\n", a, b, c);"
From a syntactical sweetness point of view, it is easier. However, the %f on doubles truncates the precision. I figured there must be a way to get the full precision.
DecimalFormat is syntactically sour for this purpose, as you need to instantiate the DecimalFormat.
fwiw I have enjoyed reading the suggestions in this thread...

Help! How do I download software for a HP Laserjet Professional P1100? I keep getting the same message when I have downloaded the file "Your security preferences allow installation of only apps from the Mac App Store and identified developers" Help!

How do I download software for a HP Laserjet Professional P1100? I keep getting the same message when I have downloaded the file "Your security preferences allow installation of only apps from the Mac App Store and identified developers" Help!

You can change the settings in Security & Privacy to "Anywhere"...
That should work... as to whether the printer driver will work, that's another question.
Good luck,
Clinton

HT3702 I have two charges to my credit card for the same dollar amount at two different times. First on 2/27/14 & second on 3/25/14 for $4.34. today's is pending payment and last months has been removed form my account. I have not purchased anything.

I have two charges to my credit card for the same dollar amount at two different times. First on 2/27/14 & second on 3/25/14 for $4.34. today's is pending payment and last months has been removed from my account. I have not purchased anything.

If they are regular payments for the same amount then it sounds like you have an auto-renewing subscription - there are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098

I am receiving updates everyday for creative cloud, always the same updates (sometimes even two time

i am receiving updates everyday for creative cloud, always the same updates (sometimes even two times a day . Is there a way to stop that?

Checked out that link and everything seems to be in order on this machine at this time.
I only have CC installed on this one machine, not even my secondary machine like is permitted. it seems odd that I'm asked to re-accept the Licence Agreement as often as I am. If I had to guess, it's almost every week, if not multiple times some weeks, that all the software will decide I should have to view the licence agreement.
Edit: I've never had any noticeable "errors" activating or anything like that. I just get asked to do it quite frequently.
This activation screen isn't too annoying (it involves clicking one single button), but like I stated earlier, if I'm trying to launch the software by double-clicking on a PSD, AI, PPROJ, AEP, etc... that file will fail to open.
I feel like that's probably not really a bug, but it is frustrating, since I did launch the application with the intent to edit that specific file I tried to open.
Again, something that you guys may consider working on.
Another annoyance is that: agreeing to the licence agreement is a per-application task, so if I see that Licence Agreement dialogue window by opening Photoshop (for example), I know that every other piece of software I have in the suite (Illustrator, Premiere, After Effects, Audition) will be showing me that screen on it's next launch. Probably deliberate for legal purposes that I can't just agree once for the whole suite, but heck, it would save me a lot of minor headaches if it was a unified agreement.

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

Is my battery life the same as when I first got my ipod?

I've had my iPod for a couple months, I've noticed that the battery life seems weaker and dies out quicker now. Am I just thinking this, is my battery life the same as when i first got my iPod?

See these as well...
Tips And Tricks For iPod Battery
iPod Battery Unplugged
Caring For iPod Battery
About the iPod Battery
And use this to test how long the battery actually lasts...
How To Determine Your iPods Battery Life
btabz

When using Tab Groups, is less power/memory used or is it the same as when all the tabs are opened in the task bar?

When using Tab Groups, is less power/memory used or is it the same as when all the tabs are opened in the task bar?

it's just another View for your tabs which needs less *space* in the taskbar, but same *memory* of your computer.
exception: if you (re)start FF and restore the last session (with lots of tabs/groups) there is an option in FF-Settings to load the (content of the) tabs only as soon as they are clicked, and not as soon as FF starts. That trick saves memory.

HT5664 ive upgraded to 9.5 but i cannot open, I've tried the upgraded tool as well, still giving me the same answer when trying to open iPhoto. any help

ive upgraded to 9.5 but i cannot open, I've tried the upgraded tool as well, still giving me the same answer when trying to open iPhoto. any help

Go to your Applications / Utilities folder and find the Upgrader app there. Double click on it to run it.

Internet Explorer problem (two windows pop up at the same time when started)

I have new T61 with vista business. From unknown time period, whenever I double click to open IE, two taps (in one window) pop up. I don't know how to fix it. Please advise me. Thank you in advance.

I spoke with Lacie support a few days ago and they suspect that the one drive had a catastrophic failure and the other (the newer one) was just a bad power supply. They are sending me a new PS and suggested that I at least try to remove the other drive from the case and see if I could get another system to read it. It pretty much did the same thing when it spun up - sounded like an airplane taking off.
Also, they told me that as a previous customer I am entitled to a discount on a new drive if I provided sales with the ticket number for the problem. So I called to see how good the discount was and I was pleasantly pleased. I ordered and have already received a 2TB Raid and have it installed as a RAID 1 for my main backup drive.
Now that leaves me with my old backup drive still waiting on a new PS to see if it will spin up. If it doesn't, I'm really up the creek since it was the backup for my system, including the other failed drive.
If it DOES spin up and I can access the data, that leaves me with another question. Can I access the Time Machine backups directly for the old drive? If so, will copying the latest backup folder give me all the data or is it spread out somewhere? Hopefully this will be my dilemma, cause at least the data will be there!
Thanks.

After closing out, FF will not restart, says it is already running forcing me to reboot. I have removed and re-installed FF and still get the same message when trying to open the internet using FF. How can this be fixed?

When I close out Firefox, and return later to use the internet, I click on Firefox and it gives me a message stating that Firefox is already running and needs to be closed before restarting or reboot my system. This occurs every time Firefox is closed and attempt to re-start it,,, not only at times,,,, EVERY time.
I have tried removing Firefox from my system and re-installing to fix this issue however,,, this did not work. After re-installing, I still get the same message when attempting to restart Firefox.
I have also tried Ctrl, Alt, delete to open the task manager and find there is no task to close.
I do not have any problems when using IE, I prefer to use Firefox as it is faster and crashes less than IE.
I am very frustrated at having to reboot my system each time I want to use the internet.
How can this problem be repaired?

There are various causes for this error, see [[Firefox is already running but is not responding]] for details.

Can two people share the same Apple ID on two different iPhones and maintain different passwords? Yes, there is more to the story.

I have an iMac, and iPhone. I've had my Apple ID for a few years.
My wife got an iPhone 4S a few months back and the salesperson at Verizon set her Apple ID the same as mine, but gave her a different password. I don't know if this was ok, but that is what happened.
So, yesterday, we both upgraded to IOS6 and I had no problem logging in to my iPhone with my Apple ID. When my wife went to log in, she was told that she was entering the wrong password. We entered the password over and over again and still was wrong.
The question is... can two people share the same Apple ID on two different iPhones and maintain different passwords? (I have the feeling her iPhone is thinking that since it's my Apple ID, it wants my password.)
If not, can I still set up a new Apple ID for her even through she's had the iPhone for a few months?
Thanks.

Hi
You shold follow your feelings, its probably right most of the time.
You can have 5 different devices hucked upp to one Apple ID. What I have done is that my wife and I have one Apple ID, when I bye a new app on my phone, She gets it to. Thats nice.
You can allways set upp a new Apple ID for your wife.

Have been told if you use the same itunes account with two iphone you will receive each others text messages, is this true

Have been told if you use the same itunes account on two iphones, you will receive each others text messages, is this true?

you can use the same itunes id for purchases and so on, but have separate icloud id's for imessaging and all the icloud stuff. it's not preferable, but it isn't a problem either.
http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US

HP Laserjet P3015 double sided - the last odd page prints on the same page when printing two copies

Similar Messages

Maybe you are looking for